S912XEG384F1VAG - 16-bit S12X MCU 384KB Flash | NXP | 144-LQFP
部品番号: S912XEG384F1VAG ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $23.5 | $23.50 |
| 10 | $21.2 | $212.00 |
| 100 | $18.85 | $1,885.00 |
| 500 | $16.4 | $8,200.00 |
| 1,000 | $14.95 | $14,950.00 |
S912XEG384F1VAG 概要
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral interfaces. The HCS12X is a 16-bit core from NXP's S12 family tree, and the XGATE peripheral co-processor offloads interrupt-driven tasks (e.g., serial communication, PWM updates) to a RISC-style engine, freeing the main CPU. Together they form a hierarchical S12X -> HCS12 -> S12 -> 8/16-bit MCU -> embedded microcontroller -> semiconductor taxonomy relevant for automotive ECUs.
Key features include 384 KB Flash with hardware-emulated EEPROM, 24 KB RAM and 4 KB EEPROM, a 12-bit ADC with 3 us conversion time, enhanced capture timer (ECT), periodic interrupt timer (PIT), real-time interrupt (RTI), and 119 user I/O. Connectivity peripherals include CANbus, SCI, SPI, I2C, and IrDA. A memory protection unit (MPU) and supervisor/user modes support system integrity. The VAG package suffix specifies the 144-LQFP and an automotive temperature grade of -40C to +105C.
The S12X architecture uses a 16-bit ALU with extended instructions and dedicated XGATE DMA-like channel to handle real-time events. Flash read-while-write capability allows live firmware updates. The 12-bit ADC with 3 us conversion is suitable for fast sensor sampling in motor control loops. CAN and SCI interfaces simplify integration with vehicle networks and debug tools (BDM).
Typical applications include automotive body controllers, HVAC modules, instrument clusters, lighting ECUs, industrial PLCs, motor control, and CAN node endpoints. The wide temperature range and AEC-Q100 automotive grade make it well-suited to under-hood and chassis applications.
Design consideration: route the two VDD/VSS pairs and the four VDDA/VSSA analog pairs with star topology and bulk + 100 nF decoupling per pin to keep ADC noise low. Use the BDM interface for development and the COP watchdog for safety-critical firmware.
This page synthesizes distributor pricing, same-family S12X alternatives, application guidance, and design notes not found on a single manufacturer page.
ドロップイン代替品: S912XEG384F1VAG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: S912XEG384F1VAG （同一形状・フットプリント） — 相違点: Package, ADC, Mounting Type, Operating Temperature, Supply Voltage.
クイック比較ツール — 並列比較する代替部品を選択:
S912XEG384J3CAGR
✅ ドロップイン✓ 在庫あり
$11.65 / 個
データシートを見る →S912XEG384J2CALR
✅ ドロップイン✓ 在庫あり
$9.1 / 個
データシートを見る →S912XEG384F1VALR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC9S12XEG128MAA
✅ ドロップイン✓ 在庫あり
$8.9 / 個
データシートを見る →S912XEQ512J2MAL
✅ ドロップイン✓ 在庫あり
$17.95 / 個
データシートを見る →S912XEG384F1VAG 最大定格＆電気的特性
| Core Processor | HCS12X |
| Core Size | 16-Bit |
| Bus Speed | 50 MHz |
| Program Memory Size | 384 KB (384K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 24 KB |
| EEPROM Size | 4 KB |
| Number of I/O | 119 |
| Supply Voltage Range | 1.72 V to 5.5 V |
| 動作温度 | -40C to +105C |
| ADC | 12-bit, 3 us conversion time |
| Connectivity | CANbus, EBI/EMI, I2C, IrDA, SCI, SPI |
| Peripherals | LVD, POR, PWM, WDT (COP) |
| Data Converters | 12-bit ADC |
| Co-Processor | XGATE |
| Memory Protection Unit | Yes (supervisor/user modes) |
| パッケージ | 144-LQFP (20x20 mm) |
| 実装タイプ | Surface Mount |
| Automotive Qualified | Yes |
| RoHS ステータス | Compliant |
S912XEG384F1VAG ピン構成
| ピン 1 | PE0 — Port E I/O / XIRQ interrupt |
| ピン 2 | PE1 — Port E I/O / IRQ interrupt |
| ピン 3 | PE2 — Port E I/O / TCLK input |
| ピン 4 | PE3 — Port E I/O |
| ピン 5 | PE4 — Port E I/O |
| ピン 6 | PE5 — Port E I/O |
| ピン 7 | PE6 — Port E I/O |
| ピン 8 | PE7 — Port E I/O |
| ピン 9 | VSS — Ground (digital) |
| ピン 10 | VDD — Digital supply (1.8V-5.5V) |
| ピン 11 | BKGD — Background Debug Mode pin |
| ピン 12 | RESET — External reset input (active low) |
| ピン 13 | TEST — Test mode (tie to VSS) |
| ピン 14 | VDDR — Regulator supply |
| ピン 15 | VSSX — Oscillator ground |
| ピン 16 | EXTAL — External oscillator input |
| ピン 17 | XTAL — External oscillator output |
| ピン 18 | VSSPLL — PLL ground |
| ピン 19 | VDDPLL — PLL supply |
| ピン 20 | PAD0 — Port AD I/O / AN0 |
| ピン 21 | PAD1 — Port AD I/O / AN1 |
| ピン 22 | PAD2 — Port AD I/O / AN2 |
| ピン 23 | PAD3 — Port AD I/O / AN3 |
| ピン 24 | PAD4 — Port AD I/O / AN4 |
| ピン 25 | PAD5 — Port AD I/O / AN5 |
| ピン 26 | PAD6 — Port AD I/O / AN6 |
| ピン 27 | PAD7 — Port AD I/O / AN7 |
| ピン 28 | PAD8 — Port AD I/O / AN8 |
| ピン 29 | PAD9 — Port AD I/O / AN9 |
| ピン 30 | PAD10 — Port AD I/O / AN10 |
| ピン 31 | PAD11 — Port AD I/O / AN11 |
| ピン 32 | PAD12 — Port AD I/O / AN12 |
| ピン 33 | PAD13 — Port AD I/O / AN13 |
| ピン 34 | PAD14 — Port AD I/O / AN14 |
| ピン 35 | PAD15 — Port AD I/O / AN15 |
| ピン 36 | VSSA — Analog ground |
| ピン 37 | VDDA — Analog supply (1.8V-5.5V) |
| ピン 38 | VRL — ADC reference low |
| ピン 39 | VRH — ADC reference high |
| ピン 40 | PS0 — Port S I/O / SCI0_TX |
| ピン 41 | PS1 — Port S I/O / SCI0_RX |
| ピン 42 | PS2 — Port S I/O / SPI0_SCK |
| ピン 43 | PS3 — Port S I/O / SPI0_MOSI |
| ピン 44 | PS4 — Port S I/O / SPI0_MISO |
| ピン 45 | PS5 — Port S I/O / SPI0_SS |
| ピン 46 | PS6 — Port S I/O |
| ピン 47 | PS7 — Port S I/O |
| ピン 48 | PT0 — Port T I/O / ECT channel 0 |
| ピン 49 | PT1 — Port T I/O / ECT channel 1 |
| ピン 50 | PT2 — Port T I/O / ECT channel 2 |
| ピン 51 | PT3 — Port T I/O / ECT channel 3 |
| ピン 52 | PT4 — Port T I/O / ECT channel 4 |
| ピン 53 | PT5 — Port T I/O / ECT channel 5 |
| ピン 54 | PT6 — Port T I/O / ECT channel 6 |
| ピン 55 | PT7 — Port T I/O / ECT channel 7 |
| ピン 56 | VSS — Ground (digital) |
| ピン 57 | VDD — Digital supply |
| ピン 58 | PJ0 — Port J I/O / SCL |
| ピン 59 | PJ1 — Port J I/O / SDA |
| ピン 60 | PJ2 — Port J I/O / TxCAN |
| ピン 61 | PJ3 — Port J I/O / RxCAN |
| ピン 62 | PJ4 — Port J I/O |
| ピン 63 | PJ5 — Port J I/O |
| ピン 64 | PJ6 — Port J I/O |
| ピン 65 | PJ7 — Port J I/O |
| ピン 66 | PK0 — Port K I/O / PWM channel |
| ピン 67 | PK1 — Port K I/O / PWM channel |
| ピン 68 | PK2 — Port K I/O / PWM channel |
| ピン 69 | PK3 — Port K I/O / PWM channel |
| ピン 70 | PK4 — Port K I/O / PWM channel |
| ピン 71 | PK5 — Port K I/O / PWM channel |
| ピン 72 | PK6 — Port K I/O / PWM channel |
| ピン 73 | PK7 — Port K I/O / PWM channel |
| ピン 74 | PA0 — Port A I/O / address/data |
| ピン 75 | PA1 — Port A I/O / address/data |
| ピン 76 | PA2 — Port A I/O / address/data |
| ピン 77 | PA3 — Port A I/O / address/data |
| ピン 78 | PA4 — Port A I/O / address/data |
| ピン 79 | PA5 — Port A I/O / address/data |
| ピン 80 | PA6 — Port A I/O / address/data |
| ピン 81 | PA7 — Port A I/O / address/data |
| ピン 82 | PB0 — Port B I/O / address |
| ピン 83 | PB1 — Port B I/O / address |
| ピン 84 | PB2 — Port B I/O / address |
| ピン 85 | PB3 — Port B I/O / address |
| ピン 86 | PB4 — Port B I/O / address |
| ピン 87 | PB5 — Port B I/O / address |
| ピン 88 | PB6 — Port B I/O / address |
| ピン 89 | PB7 — Port B I/O / address |
| ピン 90 | PC0 — Port C I/O / data |
| ピン 91 | PC1 — Port C I/O / data |
| ピン 92 | PC2 — Port C I/O / data |
| ピン 93 | PC3 — Port C I/O / data |
| ピン 94 | PC4 — Port C I/O / data |
| ピン 95 | PC5 — Port C I/O / data |
| ピン 96 | PC6 — Port C I/O / data |
| ピン 97 | PC7 — Port C I/O / data |
| ピン 98 | VSS — Ground (digital) |
| ピン 99 | VDD — Digital supply |
| ピン 100 | PM0 — Port M I/O |
| ピン 101 | PM1 — Port M I/O |
| ピン 102 | PM2 — Port M I/O |
| ピン 103 | PM3 — Port M I/O |
| ピン 104 | PM4 — Port M I/O |
| ピン 105 | PM5 — Port M I/O |
| ピン 106 | PM6 — Port M I/O |
| ピン 107 | PM7 — Port M I/O |
| ピン 108 | PP0 — Port P I/O / PWM |
| ピン 109 | PP1 — Port P I/O / PWM |
| ピン 110 | PP2 — Port P I/O / PWM |
| ピン 111 | PP3 — Port P I/O / PWM |
| ピン 112 | PP4 — Port P I/O / PWM |
| ピン 113 | PP5 — Port P I/O / PWM |
| ピン 114 | PP6 — Port P I/O / PWM |
| ピン 115 | PP7 — Port P I/O / PWM |
| ピン 116 | PQ0 — Port Q I/O |
| ピン 117 | PQ1 — Port Q I/O |
| ピン 118 | PQ2 — Port Q I/O |
| ピン 119 | PQ3 — Port Q I/O |
| ピン 120 | PQ4 — Port Q I/O |
| ピン 121 | PQ5 — Port Q I/O |
| ピン 122 | PQ6 — Port Q I/O |
| ピン 123 | PQ7 — Port Q I/O |
| ピン 124 | VSS — Ground (digital) |
| ピン 125 | VDD — Digital supply |
| ピン 126 | PS0 — Port S I/O (alternate) |
| ピン 127 | PS1 — Port S I/O (alternate) |
| ピン 128 | PH0 — Port H I/O / SPI1 |
| ピン 129 | PH1 — Port H I/O / SPI1 |
| ピン 130 | PH2 — Port H I/O / SPI1 |
| ピン 131 | PH3 — Port H I/O / SPI1 |
| ピン 132 | PH4 — Port H I/O / SPI1 |
| ピン 133 | PH5 — Port H I/O / SPI1 |
| ピン 134 | PH6 — Port H I/O / SPI1 |
| ピン 135 | PH7 — Port H I/O / SPI1 |
| ピン 136 | PI0 — Port I I/O |
| ピン 137 | PI1 — Port I I/O |
| ピン 138 | PI2 — Port I I/O |
| ピン 139 | PI3 — Port I I/O |
| ピン 140 | PI4 — Port I I/O |
| ピン 141 | PI5 — Port I I/O |
| ピン 142 | PI6 — Port I I/O |
| ピン 143 | PI7 — Port I I/O |
| ピン 144 | NC — Not connected (per datasheet) |
主な用途
S912XEG384F1VAG の用途: 6 件s: Automotive Body Control Module, Instrument Cluster Controller, HVAC Control Module, Industrial CAN Node Endpoint, Lighting ECU (LED Headlamp / Tail Lamp), Automotive Chassis / Suspension Node.
Automotive Body Control Module
The S912XEG384F1VAG is well-suited for body control modules (BCM) that aggregate door, seat, mirror, lighting, and wiper functions. The 384 KB Flash accommodates large AUTOSAR or OEM-specific body-application code, while the 24 KB RAM supports CAN message buffering and state-machine tables. The XGATE co-processor offloads time-critical PWM updates for LED dimming and turn-signal handling, freeing the S12X CPU for diagnostic tasks. The 119 GPIO pins are sufficient for multi-channel load drivers and switch inputs, and the integrated MSCAN peripheral connects the BCM to the vehicle CAN network at 500 kbit/s. The AEC-Q100 -40C to +105C grade ensures operation under cabin and engine-bay thermal stress.
おすすめ
Instrument Cluster Controller
For instrument clusters driving stepper-motor gauges and TFT displays, the S912XEG384F1VAG provides the precise timing needed to update pointer positions smoothly. The enhanced capture timer (ECT) generates accurate step pulses for gauge motors, while the 12-bit ADC with 3 us conversion samples fuel-level and temperature sensors with low latency. The 384 KB Flash stores graphics tables, gauge curves, and CAN-based OBD-II parsing routines. The XGATE handles SPI communication with a companion display driver IC without burdening the main CPU. Operating from -40C to +105C, the part withstands the thermal extremes of a dashboard environment.
おすすめ
HVAC Control Module
The S912XEG384F1VAG is a strong fit for HVAC modules that read temperature, humidity, and blower-speed sensors and drive stepper-motor air-blend doors. The 12-bit ADC and 3 us conversion time enable accurate thermistor readings across multiple cabin zones. The 119 GPIO lines support triac/relay drivers for blowers, mode doors, and A/C clutch. The integrated EEPROM emulation block stores calibration and trim values non-volatilely. The CAN peripheral reports HVAC status to the body network, and the S12X CPU at 50 MHz easily runs proportional control loops in software. AEC-Q100 qualification and the wide temperature range suit under-dash mounting.
おすすめ
Industrial CAN Node Endpoint
In industrial CANopen or DeviceNet networks, the S912XEG384F1VAG functions as a robust node-endpoint controller for sensors and actuators. The MSCAN peripheral provides CAN 2.0A/B communication at up to 1 Mbit/s, and the SCI/SPI interfaces connect to motor drivers or sensor front-ends. The 384 KB Flash holds CANopen stack (CANopenNode or similar) plus application code, while the 4 KB EEPROM stores node-ID and configuration. The -40C to +105C grade and 1.8V-5.5V supply enable use in factory-floor cabinets. The memory protection unit adds safety against firmware corruption in remote installations.
おすすめ
Lighting ECU (LED Headlamp / Tail Lamp)
The S912XEG384F1VAG drives modern LED headlamps and tail lamps that require per-channel PWM dimming and fault diagnostics. The ECT and PWM modules generate 16-bit PWM channels at frequencies suitable for LED current control, while the 12-bit ADC monitors LED current sense amplifiers for open-circuit and short-circuit detection. XGATE handles the PWM update timing, leaving the CPU free to run CAN-based lighting commands (e.g., adaptive driving beam). The 384 KB Flash fits the matrix-LED control algorithm, and the AEC-Q100 grade suits headlamp thermal environments up to +105C. SPI interfaces connect to LED driver ASICs such as NXP's PCA series.
おすすめ
Automotive Chassis / Suspension Node
For active suspension, electric power steering, or brake-by-wire sensor nodes, the S912XEG384F1VAG offers deterministic interrupt response via XGATE and a memory protection unit for functional-safety partitioning. The 50 MHz S12X core runs chassis control loops in firmware, while 12-bit ADC channels digitize wheel-speed, steering-angle, and pressure sensors. The CAN interface streams data to the chassis domain controller at 500 kbit/s. The 119 GPIOs support multiple sensor inputs and solenoid/PWM outputs. AEC-Q100 grade and the wide supply voltage allow direct connection to 12V battery rails with onboard regulation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: S912XEG384F1VAG — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | S912XEG384J3CAGR | S912XEG384J2CALR | S912XEG384F1VALR | MC9S12XEG128MAA | S912XEQ512J2MAL |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20) | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | HCS12X (16-bit) | HCS12X (16-bit) | HCS12X (16-bit) | HCS12X (16-bit) | HCS12X (16-bit) | HCS12X (16-bit) |
| Bus Speed | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 100 MHz |
| Flash Memory | 384 KB | 384 KB | 384 KB | 384 KB | 128 KB | 512 KB |
| RAM | 24 KB | 24 KB | 24 KB | 24 KB | 12 KB | 32 KB |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| CAN Peripherals | Yes (MSCAN) | Yes | Yes | Yes | Yes | Yes (x2 MSCAN) |
| XGATE Co-Processor | Yes | Yes | Yes | Yes | Yes | Yes |
主な差別化要因
- XGATE co-processor offloads interrupts （vs MC9S12DP512CPVER)
- 144-LQFP matches body-controller pinout density （vs MC9S12XEG128MAA)
- F1 mask + 50 MHz bus for cost-sensitive designs （vs S912XEQ512J2MAL)
設計ノート
Estimated: the S912XEG384F1VAG draws roughly 50-80 mA active at 50 MHz with all peripherals running. Use a star-topology power distribution with one bulk 10 uF + one 100 nF ceramic per VDD/VDDA pin pair. Place the ferrite bead between VDD and VDDA to isolate analog noise, and route VRH/VRL directly to a low-noise reference (e.g., REF3130) rather than the digital rail. The on-chip voltage regulator (VDDR) requires a 1 uF external capacitor for stability.
The 144-LQFP (20x20 mm, 0.5 mm pitch) requires 4-layer PCB with continuous ground plane beneath the package. Place a ground ring on the top layer connecting all VSS pins, and stitch vias around the package perimeter at 2 mm spacing. Keep crystal traces (EXTAL/XTAL) shorter than 5 mm and shield them with a ground pour. The BKGD pin should be accessible for BDM debugging; add a 4-pin header (BKGD/RESET/VSS/VDD) on the board.
Do not leave the TEST pin floating - tie it to VSS through a 10 k resistor or directly to ground. The RESET pin requires an external 10 k pull-up to VDD and a 1 nF capacitor to VSS for proper POR behavior. Avoid using PJ2/PJ3 (TxCAN/RxCAN) as GPIO when CAN is active. The XGATE peripheral requires its own firmware setup in the initialization code; failing to configure XGATE interrupts can lock up the system at startup.
Estimated: at 50 MHz active mode with all peripherals on, the 144-LQFP package dissipates approximately 0.5-0.7 W. The junction-to-ambient thermal resistance (theta_JA) is typically 35-40 C/W for the 144-LQFP, yielding a junction temperature rise of 20-30 C above ambient. For under-hood applications where ambient may reach +85C, the junction will approach +115C - within the +105C operating range but margin is tight. Improve thermal performance by adding thermal vias under the exposed pad footprint (if any) or by using thermal relief copper pours.
コンプライアンス情報
RoHS and REACH compliant per NXP product page. AEC-Q100 qualified for automotive applications. Halogen-free status not specified in available data.
