S912XEG384J3CAGR - 384KB Flash S12X MCU, 50MHz, LQFP-144 | NXP
部品番号: S912XEG384J3CAGR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $18.5 | $18.50 |
| 10 | $16.85 | $168.50 |
| 100 | $14.95 | $1,495.00 |
| 500 | $13.2 | $6,600.00 |
| 1,000 | $11.65 | $11,650.00 |
S912XEG384J3CAGR 概要
What is an HCS12X microcontroller? The HCS12X is NXP's 16-bit automotive MCU family that extends the legacy HCS12 architecture with a co-processor (XGATE) for interrupt-driven peripheral offload, allowing deterministic, low-latency I/O handling. In the broader taxonomy it sits as a 16-bit microcontroller -> automotive microcontroller -> embedded processor -> semiconductor IC. HCS12X parts target body, chassis, and powertrain ECUs where deterministic real-time behaviour, on-chip CAN, and AEC-Q100 stress tolerance are required.
Key features of the S912XEG384J3CAGR include 384KB of Flash program memory, 50MHz CPU/bus clock, integrated SPI, watchdog timer, internal oscillator, and 144 GPIO-capable pins in an LQFP-144 package. The 144-pin LFQFP (Low-Frequently-eed QFP) provides sufficient I/O for multi-channel peripheral interface enabled simultaneously. The "G" suffix confirms Pb-free, lead-free, RoHS-compliant assembly.
Architecturally, the S12X core pairs a 16-bit CPU with the XGATE peripheral co-processor that handles high-throughput interrupt-driven tasks (CAN/LIN/SPI/PWM servicing) without CPU intervention, enabling deterministic response at high bus frequencies. The 384KB Flash bank supports in-application programming and EEPROM emulation for automotive calibration data storage.
Typical applications for the S912XEG384J3CAGR include automotive body controllers, instrument cluster MCUs, HVAC control, immobilizer interfaces, industrial CAN nodes, and general-purpose 16-bit embedded control with deterministic XGATE peripheral offload. The wide LQFP-144 pin count supports multi-bus bridging designs.
When designing with this part, plan the XGATE interrupt vector table alongside the CPU vector table and reserve the watchdog timer for fail-safe recovery. The 1.8V core supply rail requires a low-noise source, a 3.3V I/O rail, and careful decoupling per NXP's hardware design guidelines for HCS12X.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
ドロップイン代替品: S912XEG384J3CAGR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: S912XEG384J3CAGR （同一形状・フットプリント） — 相違点: Package, Core, Operating Temperature, Flash Memory, ADC.
クイック比較ツール — 並列比較する代替部品を選択:
S912XEQ384J3CAG
✅ ドロップイン📋 参考代替品（カタログ未掲載）
S912XET512BMAGR
✅ ドロップイン✓ 在庫あり
$6.6 / 個
データシートを見る →S912XEG384J2VAL
✅ ドロップイン✓ 在庫あり
$17.8 / 個
データシートを見る →MC9S12XEQ384CAG
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →S9S12XF384J2MLMR
✅ ドロップイン✓ 在庫あり
価格はお問い合わせください
データシートを見る →MC9S12XEP768CAG
✅ ドロップイン✓ 在庫あり
$19.85 / 個
データシートを見る →S912XEG384J3CAGR 最大定格＆電気的特性
| Manufacturer | NXP Semiconductors / Freescale |
| Product Type | 16-bit Microcontroller (MCU) |
| Core | S12X (HCS12X with XGATE co-processor) |
| Program Memory (Flash) | 384 KB |
| Maximum CPU/Bus Frequency | 50 MHz |
| 電源電圧 | 1.8 V |
| 動作温度範囲 | -40 C to +85 C |
| Temperature Grade | Industrial |
| パッケージ | LQFP-144 (LFQFP), 144 gull-wing terminals |
| 実装タイプ | Surface Mount |
| Terminal Form | GULL WING |
| Package Code / Shape | LFQFP / SQUARE |
| Integrated Peripherals | SPI, Watchdog Timer, Oscillator subsystem |
| Lead-Free / RoHS | Yes (G suffix indicates Pb-free) |
| Automotive Qualified | AEC-Q100 qualified |
S912XEG384J3CAGR lfqfp / square ピン配置ガイド
S912XEG384J3CAGR (lfqfp / square パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: S912XEG384J3CAGR.
詳細は データシート をご参照ください。
主な用途
S912XEG384J3CAGR の用途: 6 件s: Automotive Body Control Module, Instrument Cluster MCU, HVAC Control Module, Immobilizer Interface, Industrial CAN Node Controller, General-Purpose 16-bit Embedded Controller.
Automotive Body Control Module
The S912XEG384J3CAGR's 384KB Flash and 50MHz S12X core make it ideal for body control modules (BCMs) that orchestrate central locking, exterior lighting, wiper control, and CAN-mirror communication with the gateway. The XGATE co-processor offloads high-frequency CAN/LIN interrupt servicing, enabling deterministic response times for body-network messages. With 144 GPIO pins, the part supports multiple SPI buses for lighting drivers, ADC channels for switch reading, and PWM channels for motor control - in a single LQFP-144 footprint.
おすすめ
Instrument Cluster MCU
Instrument clusters require a deterministic real-time MCU to drive stepper motors for gauges, multiplex multiple SPI displays, and service CAN traffic from the vehicle bus. The S912XEG384J3CAGR's 384KB Flash provides sufficient code room for gauge algorithms, diagnostic routines, and CAN message libraries, while the 50MHz bus delivers the throughput needed to refresh gauges at 100Hz without jitter. The XGATE offloads PWM generation for stepper motor control, freeing main CPU cycles for application logic in this automotive cluster design.
おすすめ
HVAC Control Module
HVAC modules demand precise PWM control of blower motors, temperature sensor ADC sampling, and CAN/LIN communication with the body controller. The S912XEG384J3CAGR's LQFP-144 package exposes enough GPIO for multi-zone temperature sensing, while the S12X core with XGATE offload handles PWM updates with deterministic latency. The 384KB Flash accommodates lookup tables for fan curves, blend-door algorithms, and diagnostic handlers, all within an AEC-Q100 qualified industrial-grade silicon suitable for cabin-mounted automotive HVAC modules.
おすすめ
Immobilizer Interface
The S912XEG384J3CAGR's 384KB Flash, deterministic XGATE interrupt handling, and SPI peripheral make it well-suited for immobilizer interface modules that communicate with LF/HF transponders via SPI-driven reader ICs. The 144-pin LQFP supports multiple SPI instances for separate antennas and a CAN interface for body-network reporting. AEC-Q100 qualification plus industrial temperature grading allow cabin or steering-column placement, while NXP's HCS12X security ecosystem supports cryptographic authentication of transponder challenges.
おすすめ
Industrial CAN Node Controller
Outside the automotive cabin, the S912XEG384J3CAGR serves as a robust industrial CAN node controller for PLCs, motor controllers, and sensor hubs requiring deterministic real-time response. The 50MHz S12X core plus XGATE handles multi-channel CAN traffic with sub-millisecond latency, while the 144-pin LQFP provides GPIO for sensor I/O, digital inputs, and relay drivers. The -40C to +85C industrial temperature grade suits factory floor installations, and 384KB Flash accommodates CANopen or DeviceNet protocol stacks plus application firmware.
おすすめ
General-Purpose 16-bit Embedded Controller
Beyond automotive, the S912XEG384J3CAGR functions as a general-purpose 16-bit embedded controller for robotics, building automation, and test equipment. The 384KB Flash stores RTOS kernels (WRIGHT-MicroC/OS, FreeRTOS S12X port) plus application logic, while the 50MHz bus delivers deterministic multi-tasking throughput. The 144-pin LQFP supports a rich peripheral mix (SPI, SCI, timers, ADC, PWM) enabling multi-sensor data acquisition, motor control, and human-machine interface (HMI) keypad scanning in a single chip.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: S912XEG384J3CAGR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | S912XEQ384J3CAG | S912XET512BMAGR | S912XEG384J2VAL | MC9S12XEQ384CAG | S9S12XF384J2MLMR | MC9S12XEP768CAG |
|---|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | LQFP-144 (LFQFP) | LQFP-144 - same | LQFP-144 - same | LQFP-144 - same | LQFP-144 - same | LQFP-144 - same | LQFP-144 - same |
| Program Flash | 384 KB | 384 KB | 512 KB | 384 KB | 384 KB | 384 KB | 768 KB |
| Maximum Bus Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Temperature Grade | Industrial -40/+85 C | Industrial -40/+85 C | Industrial -40/+85 C | Extended -40/+105 C | Industrial -40/+85 C | Industrial -40/+85 C | Industrial -40/+85 C |
| Core Family | S12X with XGATE | S12X with XGATE | S12X with XGATE | S12X with XGATE | S12X with XGATE | S12X with XGATE | S12X with XGATE |
| AEC-Q100 Qualified | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
| Supply Voltage | 1.8 V core | 1.8 V core | 1.8 V core | 1.8 V core | 1.8 V core | 1.8 V core | 1.8 V core |
| Approx. Unit Price (1 pc) | $18.50 | $17.50 | $22.00 | $20.00 | $17.00 | $24.00 | $26.50 |
主な差別化要因
- Highest-density Flash in S12XEG family at LQFP-144 （vs S912XEG256J2CAL)
- Lower unit price than 768KB variant （vs MC9S12XEP768CAG)
- Industrial-grade vs extended-temperature alternative （vs S912XEG384J2VAL)
- Standard family naming vs legacy MC9S12 prefix （vs MC9S12XEQ384CAG)
設計ノート
The S912XEG384J3CAGR requires a low-noise 1.8V core supply and a separate 3.3V I/O supply (typical S12X architecture). Place 100nF ceramic decoupling capacitors as close as possible to every VDD/VSS pair on the LQFP-144 package; add a bulk 10uF tantalum or ceramic capacitor near the regulator output. The MCU's in-application programming (IAP) and EEPROM-emulation operations draw transient current spikes during Flash writes - ensure the regulator has 150mA headroom above the steady-state IDD.
Follow NXP's AN2400 hardware design guidelines for HCS12X layout. Place the external crystal/oscillator within 5mm of the XTAL pins with a guarded ground plane to minimize jitter. Route SPI and CAN traces as differential pairs with 100ohm characteristic impedance; keep high-speed signal traces away from the crystal area. Maintain continuous ground planes under the LQFP-144 thermal pad for thermal dissipation and EMI suppression.
Do not enable XGATE interrupts before configuring the XGATE vector table and the XGVBR/ROVER registers; an uninitialized XGATE will fetch garbage vectors and crash the CPU. The watchdog timer must be serviced (or disabled for debug) during development to prevent unintended resets. When migrating from S12XEG256 to S912XEG384, verify Flash bank remapping since the higher-density variant uses a different memory map. Always issue a stop-mode idle at least once after Flash programming to allow EEPROM emulation to commit.
The S912XEG384J3CAGR's 50MHz bus drives fast edge rates that couple noise into adjacent traces. For SPI buses running above 10MHz, place 22-33ohm series damping resistors near the MCU pins to reduce ringing. CAN bus termination with 120ohm resistors at each end of the bus is mandatory per ISO 11898. For multi-channel ADC sampling, use separate analog and digital ground planes joined at a single point near the MCU's VSS pin.
コンプライアンス情報
G suffix confirms Pb-free, lead-free assembly. AEC-Q100 qualified for automotive applications. Halogen-free status not explicitly stated in web data - flagged for confirmation.
