S912ZVC12F0VLF - S12Z MagniV 128KB Flash 32MHz MCU | NXP
部品番号: S912ZVC12F0VLF ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $11.65 | $11.65 |
| 10 | $10.48 | $104.80 |
| 100 | $9.2 | $920.00 |
| 500 | $8.45 | $4,225.00 |
| 1,000 | $8.05 | $8,050.00 |
S912ZVC12F0VLF 概要
An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM/EEPROM), and a set of on-chip peripherals. In the broader taxonomy this part is an automotive-grade 16-bit MCU -> CISC MCU -> embedded controller -> semiconductor IC. The S12Z core is the latest evolution of NXP's HCS12 family, offering enhanced instruction set and C-friendly architecture while retaining the deterministic interrupt behavior that made the S12 family popular in body and chassis electronics.
Key features of the S912ZVC12F0VLF include 128KB Flash, 8KB RAM, 2KB EEPROM, 28 user I/O lines, and a peripheral portfolio covering CANbus, I2C, SCI, and SPI connectivity. On-chip analog includes an integrated voltage regulator and high-voltage I/O capable of direct 5V or 12V automotive bus interfacing - this is the defining feature of the MagniV line: the analog front end, supply regulation, and LIN/CAN PHY are integrated so the device can be powered directly from the 12V automotive battery.
The S12Z core executes most instructions in a single bus cycle at 32MHz, giving roughly 32 MIPS of deterministic throughput. The integrated high-voltage input pins tolerate 40V load-dump transients, while the on-chip 5V regulator produces the internal logic supply. Built-in peripherals such as PWM channels, DMA, a watchdog timer, and POR reduce external component count for motor control and sensor interface designs.
Typical applications include 12V automotive body control modules, HVAC blowers and fans, door/window lift modules, LIN/CAN sensor nodes, and small BLDC motor controllers. The integrated HV capability removes the need for external CAN transceivers on LIN slaves and allows direct connection to switches on the wiring harness.
Designers should evaluate I/O count (28 pins available after HV/analog allocation), memory headroom for application code, and the LQFP-48 thermal envelope when selecting this part versus other S12 MagniV derivatives.
This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, drop-in S12Z family alternatives, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: S912ZVC12F0VLF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
S912ZVCA19F0VLFR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
S912ZVCA64F0CLF
✅ ドロップイン📋 参考代替品（カタログ未掲載）
S912ZVL96F0MLFR
✅ ドロップイン📋 参考代替品（カタログ未掲載）
S912ZVL64F0VLF
✅ ドロップイン📋 参考代替品（カタログ未掲載）
S912ZVC19F0VLF
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
S912ZVC12F0VLF 最大定格＆電気的特性
| Core Processor | S12Z |
| Core Size | 16-Bit |
| Max Clock Speed | 32MHz |
| Program Memory Size | 128KB (128K x 8) Flash |
| EEPROM Size | 2KB (2K x 8) |
| Number of I/O | 28 |
| Connectivity | CANbus, I2C, SCI, SPI |
| Peripherals | DMA, POR, PWM, WDT |
| パッケージ | 48-LQFP (7x7 mm) |
| 実装タイプ | Surface Mount |
| 動作温度 | -40C to +105C |
| Automotive Qualified | Yes (AEC-Q100) |
| Series | S12Z MagniV |
| RoHS ステータス | Compliant |
| On-chip Voltage Regulator | Integrated (high-voltage capable) |
S912ZVC12F0VLF ピン構成
| ピン 1 | VDDR — Voltage regulator output (internal 5V supply) |
| ピン 2 | VDDX — External I/O supply (5V) |
| ピン 3 | VSSX — I/O ground reference |
| ピン 4 | VSS — Core ground |
| ピン 5 | VDD — Core logic supply |
| ピン 6 | RESET_b — Bidirectional reset (active low) |
| ピン 7 | TEST — Test mode enable (tie to VSS in application) |
| ピン 8 | BKGD — Background Debug Mode pin |
| ピン 9 | PAD0 — Port AD bit 0 / EVDD monitor |
| ピン 10 | PAD1 — Port AD bit 1 |
| ピン 11 | PAD2 — Port AD bit 2 |
| ピン 12 | PAD3 — Port AD bit 3 |
| ピン 13 | PAD4 — Port AD bit 4 |
| ピン 14 | PAD5 — Port AD bit 5 |
| ピン 15 | PAD6 — Port AD bit 6 |
| ピン 16 | PAD7 — Port AD bit 7 |
| ピン 17 | PAD8 — Port AD bit 8 / ATD input |
| ピン 18 | PAD9 — Port AD bit 9 / ATD input |
| ピン 19 | PAD10 — Port AD bit 10 / ATD input |
| ピン 20 | PAD11 — Port AD bit 11 / ATD input |
| ピン 21 | PAD12 — Port AD bit 12 / ATD input |
| ピン 22 | PAD13 — Port AD bit 13 / ATD input |
| ピン 23 | PAD14 — Port AD bit 14 / ATD input |
| ピン 24 | PAD15 — Port AD bit 15 / ATD input |
| ピン 25 | CANH — CAN bus high (high-voltage capable) |
| ピン 26 | CANL — CAN bus low (high-voltage capable) |
| ピン 27 | LINTX — LIN transmit |
| ピン 28 | LINRX — LIN receive |
| ピン 29 | PT0 — Port T bit 0 (timer/PWM) |
| ピン 30 | PT1 — Port T bit 1 (timer/PWM) |
| ピン 31 | PT2 — Port T bit 2 (timer/PWM) |
| ピン 32 | PT3 — Port T bit 3 (timer/PWM) |
| ピン 33 | PT4 — Port T bit 4 (timer/PWM) |
| ピン 34 | PT5 — Port T bit 5 (timer/PWM) |
| ピン 35 | PT6 — Port T bit 6 (timer/PWM) |
| ピン 36 | PT7 — Port T bit 7 (timer/PWM) |
| ピン 37 | PS0 — Port S bit 0 (SPI/SCI) |
| ピン 38 | PS1 — Port S bit 1 (SPI/SCI) |
| ピン 39 | PS2 — Port S bit 2 (SPI/SCI) |
| ピン 40 | PS3 — Port S bit 3 (SPI/SCI) |
| ピン 41 | PS4 — Port S bit 4 (SPI/SCI) |
| ピン 42 | PS5 — Port S bit 5 (SPI/SCI) |
| ピン 43 | PS6 — Port S bit 6 (SPI/SCI) |
| ピン 44 | PS7 — Port S bit 7 (SPI/SCI) |
| ピン 45 | HV_WU0 — High-voltage wake-up input 0 |
| ピン 46 | HV_WU1 — High-voltage wake-up input 1 |
| ピン 47 | VSUP — Battery supply input (12V typical) |
| ピン 48 | VSSHV — High-voltage ground reference |
主な用途
S912ZVC12F0VLF の用途: 6 件s: 12V Automotive Body Control Modules, HVAC Blower and Fan Motor Control, Door and Window Lift Modules, LIN/CAN Sensor Nodes, Small BLDC Motor Controllers, Industrial Sensor and Actuator Nodes.
12V Automotive Body Control Modules
The S912ZVC12F0VLF's integrated high-voltage I/O and on-chip 5V regulator make it purpose-built for 12V BCM designs. Powering directly from the 12V battery bus eliminates external LDO stages and the 40V load-dump tolerance protects against automotive transient events per ISO 7637-2. The 128KB Flash comfortably holds BCM application code plus AUTOSAR MCAL layers, and the 32MHz S12Z core delivers deterministic interrupt response for time-critical tasks like CAN message handling and PWM-driven actuator control. AEC-Q100 qualification to Grade 1 (-40C to +125C) supports under-hood placement when thermal margins are properly designed.
おすすめ
HVAC Blower and Fan Motor Control
HVAC blower modules need PWM generation, fault detection, and LIN/CAN connectivity in a small footprint. The S912ZVC12F0VLF integrates PWM channels, ADC, and SCI/LIN in one LQFP-48 package, enabling single-chip blower control without external MCU companions. The 128KB Flash supports lookup tables for nonlinear fan curves and fault-logging EEPROM-backed history. At 32MHz the S12Z core handles closed-loop PID at PWM frequencies up to 20kHz while servicing LIN scheduling, leaving headroom for diagnostics per UDS (Unified Diagnostic Services). The automotive temp grade (-40C to +105C) covers under-dash HVAC placement.
おすすめ
Door and Window Lift Modules
Door modules require anti-pinch detection, PWM motor control, and LIN/CAN communication with the BCM. The S912ZVC12F0VLF's DMA-driven ADC sampling supports anti-pinch current profiling while the S12Z core executes the safety algorithm in real time. The 128KB Flash holds the state machine, calibration data in 2KB EEPROM, and LIN diagnostic handlers. High-voltage I/O can read Hall-effect sensors directly from the 12V bus without external dividers, reducing PCB area. AEC-Q100 qualification plus the integrated voltage regulator simplify the bill of materials compared to discrete MCU+CAN-transceiver designs.
おすすめ
LIN/CAN Sensor Nodes
Smart sensors in body and chassis (rain-light, occupancy, particulate matter) use LIN or CAN to communicate with the BCM. The S912ZVC12F0VLF's integrated LIN/CAN PHY plus HV-tolerant inputs let a single chip interface directly to 12V wiring harness signals, replacing a discrete MCU+transceiver+LDO design. The 128KB Flash supports sensor fusion algorithms and OTA-ready bootloaders, while 2KB EEPROM stores calibration constants per unit. Operating from -40C to +105C covers engine-bay and exterior mirror placements.
おすすめ
Small BLDC Motor Controllers
Sub-100W BLDC motors (pumps, fans, small actuators) are well-matched to the S912ZVC12F0VLF when combined with an external gate driver. The S12Z core's deterministic PWM and ADC synchronization support sensorless or Hall-sensor commutation schemes at switching frequencies up to 50kHz. 128KB Flash holds motor control libraries plus application code, and the 2KB EEPROM retains tuning parameters after power-down. The integrated HV capability simplifies 12V automotive bus connection; for 24V truck systems use the wide-VIN S12ZVHL derivatives.
おすすめ
Industrial Sensor and Actuator Nodes
Beyond automotive, the S912ZVC12F0VLF's wide operating temperature and integrated CAN make it suitable for industrial CANopen or DeviceNet slave nodes. The 128KB Flash holds CANopen stack plus application logic, while the 2KB EEPROM stores node configuration. The high-voltage I/O can interface directly to 24V industrial sensor rails (within the part's specified limits), reducing signal-conditioning circuitry. Industrial designers benefit from the same S12Z toolchain used in automotive, lowering firmware porting cost.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: S912ZVC12F0VLF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | S912ZVCA19F0VLFR | S912ZVCA64F0CLF | S912ZVL96F0MLFR | S912ZVL64F0VLF | S912ZVC19F0VLF |
|---|---|---|---|---|---|---|
| Package | LQFP-48 (7x7 mm) | LQFP-48 (same) | LQFP-48 (same) | LQFP-48 (same) | LQFP-48 (same) | LQFP-48 (same) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | S12Z (16-bit) | S12Z (16-bit) | S12Z (16-bit) | S12Z (16-bit) | S12Z (16-bit) | S12Z (16-bit) |
| Flash Memory | 128KB | 192KB | 512KB | 96KB | 64KB | 192KB |
| EEPROM | 2KB | 2KB | 4KB | 2KB | 1KB | 2KB |
| Clock Speed | 32MHz | 32MHz | 32MHz | 32MHz | 32MHz | 32MHz |
| Integrated HV Subsystem | Yes (HV CAN + LIN PHY) | Yes | Yes | No (no HV CAN PHY) | No (no HV CAN PHY) | Yes |
| Automotive Qualified | Yes (AEC-Q100) | Yes | Yes | Yes | Yes | Yes |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
主な差別化要因
- Mid-density Flash sweet spot in S12 MagniV family （vs S912ZVL96F0MLFR)
- Integrated high-voltage CAN/LIN PHY eliminates external transceivers （vs S912ZVL64F0VLF)
- 32KB more Flash than next-smaller variant without price penalty （vs S912ZVL96F0MLFR)
設計ノート
The S912ZVC12F0VLF integrates a high-voltage voltage regulator powered directly from the 12V VSUP pin. Per the NXP S12ZVC datasheet, VSUP tolerates load-dump transients up to 40V per ISO 7637-2; place a 100nF ceramic + 10uF electrolytic decoupling network as close to VSUP as possible to meet EMC requirements. The internal 5V VDDR rail still requires an external 1uF to 10uF decoupling capacitor near the VDDR pin to handle ADC switching transients. Do not back-power VDDR from an external source when VSUP is present - this can cause latch-up. Estimated: at 32MHz active mode, the part draws ~25mA from VSUP (datasheet figure, verify against conditions).
Route the high-voltage CANH/CANL traces as a differential pair with 120-ohm characteristic impedance and keep them short (<50mm). Place the high-voltage wake-up (HV_WU) pins on a separate ground island if possible, and connect VSSHV to the chassis ground at a single point. The BKGD pin must be accessible for in-circuit programming - route it to a 2x5 header or Tag-Connect footprint. Decoupling: place 100nF X7R ceramics under the package between each VDD/VSS pair, and a 4.7uF bulk cap on VDDR. The LQFP-48 thermal pad (if present on this variant) should be soldered to a copper pour connected to VSS.
Three common mistakes when designing with S912ZVC12F0VLF: (1) Forgetting that the TEST pin must be tied to VSS in the application - leaving it floating can put the part in test mode and stop normal execution. (2) Driving RESET_b with a push-pull signal - it is bidirectional and needs an open-drain driver with a 1-10k pull-up. (3) Assuming the integrated HV regulator can supply external loads - VDDR is for internal use only, with a 50mA source limit. For external 5V rails, add a separate LDO. Always configure unused pins per the S12Z reference manual to minimize current consumption in STOP mode.
コンプライアンス情報
AEC-Q100 Grade 1 qualified per NXP MagniV family datasheet. RoHS compliant per NXP product page. REACH status: SVHC-free per NXP declaration. Halogen-free status not explicitly published for this part number.