S9S12XS256J0CAA - 16-bit 40MHz Automotive MCU | NXP
部品番号: S9S12XS256J0CAA ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $5.89 | $5.89 |
| 10 | $5.36 | $53.60 |
| 100 | $4.85 | $485.00 |
| 500 | $4.42 | $2,210.00 |
| 1,000 | $4.05 | $4,050.00 |
S9S12XS256J0CAA 概要
A microcontroller (MCU) is a single integrated circuit that combines a processor core, program memory, data memory, and peripheral functions such as timers, communication interfaces, and analog-to-digital converters on one chip. Within the product hierarchy, the S9S12XS256J0CAA belongs to the microcontroller class of embedded processors, specifically 16-bit MCUs optimized for embedded control rather than high-throughput application processing.
Key differentiating features of this part include its cost-optimized S12X architecture targeting automotive body electronics, its 256KB on-chip Flash enabling single-chip designs without external memory, and its automotive qualification supporting direct deployment in vehicle platforms. The 40MHz bus operation provides ample real-time headroom for control loops, while the rich I/O count of 59 pins supports multiple switch, lamp, and actuator interfaces typical of body control modules.
Technically, the S12XS family maintains a high level of pin compatibility with the S12XE family, according to the NXP MC9S12XS256 reference manual, which enables hardware and software reuse across automotive electronics platforms. Up to 18 additional I/O ports feature interrupt capability, allowing wake-up from stop or wait low-power modes - an important capability for battery-connected automotive modules that must minimize quiescent current.
Typical applications include automotive body control modules, door and seat control units, lighting control, HVAC blowers, window lifters, and other cost-sensitive in-vehicle electronic control units where robust 5V logic and flash scalability matter.
When designing with this MCU, budget your flash requirements against the family scalability options (128KB to 512KB in the S12XS line) and verify that the -40C to +85C ambient rating matches your under-hood or in-cabin placement; higher-temperature placements require a different grade.
This page synthesizes distributor pricing, drop-in alternatives, and practical design guidance not found in the manufacturer datasheet, providing engineers a single citable reference for the S9S12XS256J0CAA.
ドロップイン代替品: S9S12XS256J0CAA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: S9S12XS256J0CAA （同一形状・フットプリント） — 相違点: Core Processor, Program Memory Size, RAM Size, Supply Voltage.
クイック比較ツール — 並列比較する代替部品を選択:
S9S12XS128J0CAA
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
S9S12XS512J0CAA
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
S9S12XS256J0VAA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC9S12XS256MAA
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MC9S12XA256CAAR
✅ ドロップイン✓ 在庫あり
$9.95 / 個
データシートを見る →S9S12XS256J0CAA 最大定格＆電気的特性
| Core Processor | S12X (HCS12X) |
| Core Size | 16-bit |
| Architecture | CISC |
| Maximum Clock Speed | 40 MHz |
| Program Memory Size | 256KB (256K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 12K x 8 |
| Number of I/O | 59 |
| 電源電圧 | 5 V |
| 動作温度 | -40C to +85C |
| Qualification | Automotive Qualified |
| パッケージ / ケース | 80-QFP (14x14 mm) |
| 実装タイプ | Surface Mount |
| Terminal Form | Gull Wing |
| Package Shape | Square |
S9S12XS256J0CAA square ピン配置ガイド
S9S12XS256J0CAA (square パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: S9S12XS256J0CAA.
詳細は データシート をご参照ください。
主な用途
S9S12XS256J0CAA の用途: 6 件s: Body Control Module (BCM), Door and Seat Control Units, Lighting Control (Interior/Exterior), HVAC Blower and Climate Control, Industrial Control and Actuation Nodes, Gateway and Network Node Electronics.
Body Control Module (BCM)
The S9S12XS256J0CAA is purpose-built for automotive body control modules, where it orchestrates lighting, wipers, door locks, and load diagnostics. Its 59 I/O pins directly interface relay drivers, high-side switches, and switch matrices, while the 40MHz S12X core executes control loops and CAN/LIN communication stacks with headroom. The 256KB Flash accommodates full BCM firmware including calibration tables and boot-loaders. Up to 18 interrupt-capable I/O lines enable wake-up from stop or wait modes on switch events, meeting the stringent sleep-current budgets of battery-connected modules. Its 5V supply integrates naturally with legacy automotive 12V-5V power architectures.
おすすめ
Door and Seat Control Units
Door modules control window lifters, mirrors, locks, and LED ambient lighting - functions that map well onto the S9S12XS256J0CAA's 59 multiplexed I/O and interrupt-on-change inputs. The 40MHz core handles PWM generation for window soft-start and mirror positioning while servicing LIN or CAN network traffic. The -40C to +85C automotive qualification covers in-door thermal environments, and the 5V supply interfaces with standard automotive transceivers. Per the NXP reference manual, the S12XS family's pin compatibility with S12XE lets suppliers reuse door-module hardware across memory tiers, protecting software investment as feature sets grow over platform life.
おすすめ
Lighting Control (Interior/Exterior)
Automotive lighting ECUs - headlamp levelling, LED daytime running light control, interior ambient lighting - benefit from the S9S12XS256J0CAA's timer resources and rich GPIO. The 16-bit S12X core at 40MHz generates precise PWM dimming curves and executes diagnostics such as open-load and short-circuit detection via ADC sampling of the 5V-referenced sense lines. The 256KB Flash stores dimming profile libraries and failure-code logs. The -40C to +85C rating suits under-dash and engine-bay-adjacent lamp drivers, and the interrupt-capable wake-up I/O supports parked-vehicle lamp monitoring with minimal quiescent drain on the battery.
おすすめ
HVAC Blower and Climate Control
Climate-control submodules use the S9S12XS256J0CAA to drive blower motor stages, flap position servos, and temperature sensor acquisition. The 59 I/O lines multiplex stepper-motor sequencing outputs and sensor inputs, while the 40MHz S12X core runs PID control for flap positioning and network communication with the main HVAC controller over CAN or LIN. The 256KB Flash holds temperature-compensation curves across the -40C to +85C automotive range. According to NXP, the S12XS family targets exactly these cost-sensitive body-electronics nodes, where 5V logic and robust electromagnetic-immunity heritage of the HCS12X platform simplify EMI-qualified designs.
おすすめ
Industrial Control and Actuation Nodes
Beyond vehicles, the S9S12XS256J0CAA serves industrial nodes requiring a robust 5V 16-bit controller: pump controllers, valve actuation, and generator set management. The CISC S12X core at 40MHz, 256KB Flash, and 12KB RAM comfortably host control loops and Modbus/CAN protocol stacks, while 59 I/O lines drive relays and read limit switches. The industrial MC9S12XS256MAA ordering variant provides the same die for commercial-temperature designs. Interrupt-capable I/O supports wake-on-event power saving in battery-backed installations, and the family's Flash scalability (128KB-512KB) lets a single PCB design span product performance tiers without respin.
おすすめ
Gateway and Network Node Electronics
Sub-network gateways between CAN and LIN segments rely on the S9S12XS256J0CAA's communication peripherals and interrupt architecture. The 40MHz core services both buses plus application logic, and the 12KB RAM buffers message objects and diagnostic (UDS-style) data. Wake-up capable interrupt inputs allow the node to sleep in stop or wait mode and resume on bus activity or local switch events - a requirement for always-connected but low-quiescent-current automotive ECUs. The 256KB Flash accommodates routing tables, security seeds, and flash-based logging, while the 80-QFP 14x14 mm footprint fits compact ECU housings common in zonal architectures.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: S9S12XS256J0CAA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | S9S12XS128J0CAA | S9S12XS512J0CAA | S9S12XS256J0VAA | MC9S12XS256MAA | MC9S12XA256CAAR |
|---|---|---|---|---|---|---|
| Package | 80-QFP (14x14 mm) | 80-QFP (14x14 mm) - same | 80-QFP (14x14 mm) - same | 80-QFP (14x14 mm) - same | 80-QFP (14x14 mm) - same | 80-QFP (14x14 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Architecture | S12X (HCS12X), 16-bit CISC | S12X, 16-bit CISC | S12X, 16-bit CISC | S12X, 16-bit CISC | S12X, 16-bit CISC | S12XA, 16-bit CISC |
| Max Clock Speed | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz | 40 MHz |
| Flash Memory | 256KB | 128KB | 512KB | 256KB | 256KB | 256KB |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Automotive Qualification | Yes | Yes | Yes | Yes | No (industrial grade) | Yes |
主な差別化要因
- Double the Flash of the entry S12XS variant at nearly the same footprint cost （vs S9S12XS128J0CAA)
- Cost-optimized vs higher-memory S12X parts （vs MC9S12XEP768CAG)
- Automotive qualification vs industrial variant （vs MC9S12XS256MAA)
設計ノート
The S9S12XS256J0CAA is a 5V MCU; provide a clean regulated 5V rail (automotive pre-regulators such as load-dump-rated 5V LDOs or buck converters are typical). Place 100nF ceramic decoupling capacitors at each VDD/VSS pin pair as close to the package as possible, plus one bulk capacitor (4.7-10uF) near the supply entry. Verify exact absolute maximum and operating voltage windows in the NXP family datasheet, as tolerance limits are not repeated in distributor listings.
The 80-QFP (14x14 mm) footprint uses 0.65mm-pitch gull-wing leads. Follow the IPC-recommended land pattern in the NXP package documentation and keep high-speed signals (bus, crystal, communication lines) short and referenced to a solid ground plane. Route the crystal directly adjacent to the oscillator pins with guard ground, and keep motor or relay driver traces physically separated from the MCU ground return to prevent ground-bounce reset events in automotive EMC environments.
Do not assume the CAA temperature grade suits under-hood placements - it is rated -40C to +85C; use a higher-grade ordering variant (e.g., VAA) for hotter ambient zones. Also note the ~15-week factory lead time on this OPN: qualify a same-package Flash-size alternative (S9S12XS128J0CAA or S9S12XS512J0CAA) as a second source early in the program. Finally, unused I/O should be configured as outputs low or inputs with pull devices per the reference manual to avoid floating-pin EMI susceptibility.
コンプライアンス情報
Automotive qualified per NXP product page. Xecor listing describes the device as RoHS compliant. REACH, halogen-free, and conflict-minerals status not stated in provided data.