SI3233-C-FM - 38-QFN Programmable SLIC | Silicon Labs
部品番号: SI3233-C-FM ✗ 生産終了SI3233-C-FM 概要
An SLIC is the analog front-end for a subscriber line. It converts between the voice-band telephone signal and a digital PCM or codec representation, while also handling line supervision, ringing, tone generation, and hook-state functions. In the telecommunications hierarchy, the SI3233-C-FM is a telecommunications interface IC and system-on-chip designed to reduce the component count of a single-channel line-card design. The external Si3201 companion is used with this ProSLIC family in reference applications.
Key features include SPI host control, one integrated line circuit, an 88 mA supply current, and software-configurable internal ringing rated to 90 VPK. Ringing capability is specified for 5 REN at 4 kft and 3 REN at 8 kft. The IC also generates DTMF tones and includes a lead-free status, making it suitable for modern subscriber-line and voice-access equipment requiring programmable line functions.
The SI3233-C-FM combines analog line-interface functions with host-programmable control. Firmware can configure ringing, tone generation, line supervision, and codec behavior through the SPI interface, allowing one device to serve multiple network requirements. This integration reduces external line-driver circuitry and gives the host processor direct control over subscriber-line signaling.
Typical uses include single-channel subscriber line access, voice-over-IP line cards, voice gateways, digital subscriber line equipment, and telephone line test systems. The 38-QFN package supports compact designs, while the 3.13 V to 5.25 V operating range is suitable for regulated 3.3 V and 5 V digital and analog systems.
Designers should pay close attention to the high-voltage ringing interface, external protection network, thermal dissipation, and the required companion circuitry. The line-facing pins must be isolated from logic ground according to the application reference design. Decoupling must be placed close to the supply pins, and the PCB layout must account for the exposed thermal pad and the high-voltage transient environment at the subscriber line.
This page organizes the SI3233-C-FM technical characteristics, procurement information, application context, and engineering considerations. It also distinguishes documented functionality from parameters that require confirmation against the manufacturer datasheet, helping engineers plan a compliant line-card design more efficiently.
ドロップイン代替品: SI3233-C-FM — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストSI3233-C-FM 仕様
| Product Type | Programmable Subscriber Line Interface Codec (SLIC) |
| インターフェース | SPI |
| Number of Circuits | 1 |
| 電源電圧 | 3.13 V to 5.25 V |
| 電源電流 | 88 mA |
| Power Dissipation | 700 mW |
| 動作温度 | 0°C to 70°C |
| パッケージ | 38-pin QFN |
| Ringing Voltage | Up to 90 VPK |
| Ringing Load | 5 REN at 4 kft |
| Extended Ringing Load | 3 REN at 8 kft |
| Ringing Control | Software-configurable internal balanced ringing |
| Tone Generation | DTMF generation |
| Codec Interface | Integrated |
| Lead-Free Status | Lead Free |
| Surface Mounting | Surface mount |
SI3233-C-FM 38-pin qfn ピン配置ガイド
SI3233-C-FM (38-pin qfn パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: SI3233-C-FM.
詳細は データシート をご参照ください。
主な用途
SI3233-C-FM の用途: 6 件s: Single-Channel Subscriber Line Access, Voice-over-IP Line Card, Telephone Line Test Equipment, Digital Subscriber Line Equipment, Voice Gateway Terminal, Industrial Voice Communication Module.
Single-Channel Subscriber Line Access
The SI3233-C-FM fits a one-line subscriber access board because it combines a single-channel SLIC, SPI host control, an integrated codec interface, and programmable ringing in one 38-pin QFN device. The 3.13 V to 5.25 V operating range is compatible with common 3.3 V and 5 V logic rails, while the 90 VPK internal ringing capability reduces the amount of external line-drive circuitry. Designers still need an approved protection network, line transformer or matching network as applicable, and host firmware for line supervision. PCB placement should keep high-voltage ringing paths separate from sensitive logic and provide the exposed thermal pad with an effective thermal path.
おすすめ
Voice-over-IP Line Card
The SI3233-C-FM is useful for a compact voice-over-IP line card that must present a telephone-line interface to a host processor. Its SPI interface allows firmware-driven control of programmable balanced ringing, DTMF generation, codec behavior, and line supervision, while the single-circuit architecture keeps the design appropriate for a one-line endpoint. The 88 mA supply-current figure and 700 mW stated dissipation make power budgeting important when several cards share a chassis. Use the manufacturer reference circuit for protection, bypassing, grounding, and high-voltage isolation clearances to avoid compromising signal quality or compliance.
おすすめ
Telephone Line Test Equipment
The SI3233-C-FM can support programmable telephone-line testing because its ringing, DTMF, and supervision functions can be coordinated by an external host through SPI. Software control allows test sequences to vary ringing voltage, tone generation, and line-state behavior without redesigning the analog interface. The single-channel format is appropriate for a focused line analyzer or portable test fixture rather than a multiport production tester. Engineers should validate the 90 VPK ringing operating condition, use the specified protection components, and separate the line interface from sensitive test circuitry through appropriate isolation and grounding.
おすすめ
Digital Subscriber Line Equipment
The SI3233-C-FM is applicable to compact DSL and legacy voice-over-DSL equipment requiring one analog subscriber-line channel alongside digital processing. Its single SLIC circuit, SPI interface, programmable ringing up to 90 VPK, and integrated codec interface allow the host processor to manage subscriber signaling while supporting a regulated 3.3 V or 5 V environment. The 38-pin QFN package helps reduce board area, but thermal and layout work remain critical because the line interface combines logic and elevated ringing voltage. Follow the reference layout for exposed-pad grounding, bypass placement, surge protection, and copper routing around the line-facing pins.
おすすめ
Voice Gateway Terminal
A voice gateway terminal can use the SI3233-C-FM when it needs a controlled PSTN-facing interface for one subscriber channel. The device handles programmable balanced ringing, DTMF generation, line supervision, and codec interfacing, allowing the gateway firmware to translate between telephone-line activity and host-side signaling. The single-circuit architecture is most effective in compact gateways, adapters, and branch equipment where one line per module is acceptable. The 3.13 V to 5.25 V supply range simplifies integration with standard telecom logic rails, while the 38-pin QFN package demands careful thermal-pad and high-voltage layout work.
おすすめ
Industrial Voice Communication Module
The SI3233-C-FM can be used in a controlled indoor voice communication module where one analog line channel is required and the equipment operates within 0°C to 70°C. Its SPI programming interface allows centralized configuration of ringing and DTMF behavior, while the integrated codec interface simplifies connection to a communications controller. The module designer must budget the 88 mA supply current, provide adequate copper area under the QFN thermal pad, and use the prescribed line protection network. Confirm environmental, regulatory, and reliability requirements for the finished product because the IC’s commercial operating-temperature range does not cover every industrial environment.
おすすめ
エンジニアリング参考データ: SI3233-C-FM — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Package | 38-pin QFN |
| Brand | Silicon Labs |
| Product Type | Single-channel programmable SLIC |
| Number of Circuits | 1 |
| Host Interface | SPI |
| Supply Voltage | 3.13 V to 5.25 V |
| Supply Current | 88 mA |
| Power Dissipation | 700 mW |
| Operating Temperature | 0°C to 70°C |
| Ringing Voltage | Up to 90 VPK |
| Tone Generation | DTMF generation |
| Lead-Free Status | Lead Free |
主な差別化要因
- Integrated single-channel telephony function (vs SI3010-FSR)
- Programmable ringing through the host interface (vs SI3233-C-FMR)
- Compact mixed-signal integration (vs DS26524GNA5)
設計ノート
Place the supply bypass capacitors and their ground returns directly beside the appropriate power and ground pins, following the manufacturer reference layout. The QFN exposed pad should connect to the intended thermal and electrical ground plane with short, low-impedance vias. Keep the 90 VPK line-facing routing away from low-level signal paths, and provide the required copper spacing and protection components around subscriber-line connections.
Budget at least the documented 88 mA supply current for normal device operation and use the 700 mW power figure as an additional thermal-design check. The actual converter capacity must also cover local analog and digital loads without causing supply droop during ringing or DTMF transitions. Confirm whether the host board uses 3.3 V or 5 V and verify that the selected operating point stays inside the 3.13 V to 5.25 V range.
Do not treat a same-family catalog suffix as an automatic drop-in replacement without checking the ordering code, package, pinout, and exposed-pad details. Also avoid substituting generic ringing controllers or transceivers for this device: the SI3233-C-FM combines SLIC, codec, SPI control, ringing, and DTMF functions. Validate surge protection, line loading, and firmware configuration against the manufacturer reference design before production release.
The device is rated at 700 mW power dissipation, so provide sufficient exposed-pad copper and thermal vias to spread heat into the PCB. Because the available documentation does not state the package thermal resistance or maximum junction temperature, obtain those limits before deriving an allowed ambient temperature. Consider the effect of neighboring regulators and enclosure temperature when sizing the thermal path.
コンプライアンス情報
The manufacturer datasheet snippet identifies the SI3233-C-FM as lead free. RoHS, REACH, halogen-free, and conflict-minerals status were not stated in the available technical data and therefore remain unknown. AEC-Q100 is not applicable to this telecommunications interface IC.