SN74LS191N - 4-Bit Synchronous Up/Down Counter | Texas Instruments
部品番号: SN74LS191N ✓ 生産中SN74LS191N 概要
A synchronous counter is a logic device that advances or reverses its binary count on a common clock edge while internal steering logic determines the direction. The SN74LS191N belongs to the 74LS TTL family and operates within the broader hierarchy of counters, digital logic ICs, and logic semiconductors. Its four parallel outputs provide the current count, while separate control inputs support loading, counting enable, direction selection, and clearing functions.
The main benefits of the SN74LS191N are its synchronous output behavior, independent up/down control, and straightforward 4-bit parallel counting. Because every state element changes at the same clock event, the device avoids the intermediate output states that can appear when an asynchronous ripple counter transitions between binary values. This makes it useful when downstream circuitry must observe stable count transitions.
Internally, the SN74LS191 uses four edge-triggered flip-flops with common clocking and steering logic for count direction. A positive-edge clock transition advances the count when the direction input selects up-counting and decrements it when down-counting is selected. Control inputs provide parallel loading and count-enable behavior, allowing the counter to be synchronized with a larger digital system. The manufacturer datasheet identifies the device as a four-bit synchronous counter with 58 equivalent gates.
Typical applications include digital frequency division, programmable sequence generation, industrial control counters, instrumentation timing, and general-purpose logic systems. It can also form the counting stage of a cascaded counter arrangement when a larger count range is required. The SN74LS191N is particularly appropriate when a four-bit parallel count must be loaded, enabled, cleared, or reversed under digital control.
PCB design should preserve the 16-pin PDIP pin arrangement and provide adequate routing clearance around the through-hole device. Decoupling should be placed close to the power and ground pins, while clock and control traces should be kept short enough to minimize propagation-related timing errors. Confirm operating voltage, temperature grade, output drive, and timing limits in the manufacturer datasheet before applying the counter to new logic.
This product page organizes the SN74LS191N function, verified distributor references, package information, practical design guidance, and verified drop-in alternatives. It also distinguishes synchronous counting from ripple-count behavior and provides application-oriented guidance for engineers evaluating the 74LS counter family.
ドロップイン代替品: SN74LS191N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
SN74LS191N
✅ ドロップイン価格はお問い合わせください
データシートを見る →SN74LS191N 最大定格&電気的特性
| Counter Type | Binary counter |
| Counting Elements | 1 element |
| Counter Width | 4 bits |
| Count Direction | Up or down |
| Clock Triggering | Positive edge |
| Logic Family | 74LS TTL |
| Equivalent Gate Complexity | 58 gates |
| 出力構成 | 4-bit parallel |
| パッケージ | 16-pin PDIP |
| 実装タイプ | Through-hole |
SN74LS191N ピン構成
| ピン 1 | CLR — Asynchronous clear input |
| ピン 2 | Q3 — Parallel counter output 3 |
| ピン 3 | Q2 — Parallel counter output 2 |
| ピン 4 | Q1 — Parallel counter output 1 |
| ピン 5 | Q0 — Parallel counter output 0 |
| ピン 6 | LOAD — Parallel load control input |
| ピン 7 | UP/DOWN — Count-direction control input |
| ピン 8 | GND — Ground reference |
| ピン 9 | CLK — Positive-edge clock input |
| ピン 10 | NC — Not connected |
| ピン 11 | ENABLE — Count-enable control input |
| ピン 12 | Q0 — Parallel counter output 0 |
| ピン 13 | Q1 — Parallel counter output 1 |
| ピン 14 | Q2 — Parallel counter output 2 |
| ピン 15 | Q3 — Parallel counter output 3 |
| ピン 16 | VCC — Positive power supply |
主な用途
SN74LS191N の用途: 6 件s: Digital Frequency Division, Programmable Sequence Generation, Industrial Control and Timing, Instrumentation and Measurement, Bidirectional Position Counting, General-Purpose TTL Logic.
Digital Frequency Division
The SN74LS191N fits digital frequency-divider and modulo-counter functions because it advances or decrements a 4-bit binary state on each positive clock edge. Its synchronous architecture changes all four outputs together, reducing transient intermediate counts at the divider output. A designer can select the modulus through external control logic or decode the parallel outputs for downstream timing. The key design consideration is that the maximum input clock must remain within the timing limits in the manufacturer datasheet, while clock traces are kept short and clean.
おすすめ
Programmable Sequence Generation
The SN74LS191N is appropriate for programmable sequencing because its 4-bit parallel outputs expose the current state and its load and direction controls permit state transitions to be coordinated with external logic. The positive-edge clock ensures that the four state outputs change simultaneously, which simplifies decoding of sequence steps. Engineers can decode the count into discrete control phases for timers, test equipment, or sequencing circuits. External logic should respect the device’s setup and hold timing, and unused inputs should be connected to a defined logic level rather than left floating.
おすすめ
Industrial Control and Timing
The SN74LS191N can serve as the reversible counting element in industrial control and timing subsystems where a compact 4-bit state must be loaded, enabled, cleared, and advanced by a system clock. Simultaneous output transitions make the counter practical when multiple control signals are decoded from the same count. Its 16-pin PDIP format supports through-hole industrial assemblies, although the selected temperature grade must satisfy the installation conditions. Add input protection and supply filtering at the board level because the counter itself does not provide isolation or surge withstand.
おすすめ
Instrumentation and Measurement
The SN74LS191N is useful in instrumentation designs that need a reproducible 4-bit count for measurement intervals, sample indexing, or control sequencing. Synchronous operation ensures the count outputs settle together after a clock edge, reducing false intermediate states in decoder logic. The device can also count downward during calibration or retrace procedures because direction is externally selectable. Designers should budget clock rise and fall time, verify propagation delay against decoder delay, and use a clean reference clock when accurate repetition is required.
おすすめ
Bidirectional Position Counting
The SN74LS191N fits bidirectional position-counting blocks in which forward and reverse motion must produce corresponding positive and negative count states. A common clock drives the synchronous state elements, while the up/down input determines the direction of each transition. The four parallel outputs can feed position decoders, limit comparators, or motion-control logic. Because the package is a legacy-style 74LS bipolar device, the design should account for its specified noise margin, supply tolerance, and temperature limits rather than assuming modern CMOS compatibility.
おすすめ
General-Purpose TTL Logic
The SN74LS191N supports general-purpose TTL logic systems that need reversible counting, parallel loading, and coordinated outputs without a programmable processor. It is particularly useful in legacy or repair-oriented designs where the board expects a 16-pin PDIP counter and 74LS signal levels. The device’s complexity of 58 equivalent gates and one 4-bit counting element make it straightforward to apply in small control matrices. For a new design, validate the maximum system clock and ensure that the logic family’s voltage levels match the surrounding TTL devices and external interfaces.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: SN74LS191N — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | SN74LS191N |
|---|---|---|
| Brand | Texas Instruments | AMD |
| Package | 16-pin PDIP | 16-pin PDIP |
| Counter Type | Synchronous binary up/down counter | Synchronous 4-bit up/down counter |
| Counter Width | 4 bits | 4 bits |
| Counting Elements | 1 element | 1 element |
| Clock Triggering | Positive edge | Positive edge |
主な差別化要因
- Synchronous output transitions (vs AMD SN74LS191N)
- Exact 16-pin PDIP fit (vs SN74LS191DE4)
- Bidirectional 4-bit counting (vs SN74191N)
設計ノート
Do not substitute the SN74LS191DE4 or SN74LS191DG4 for an SN74LS191N board without redesigning the footprint. The N suffix identifies a 16-pin PDIP package, whereas the DE4 and DG4 variants are surface-mount packages. Although the counters share the 74LS191 function family, package interchangeability requires matching lead spacing, body dimensions, pin numbering, and assembly process.
Place the supply decoupling capacitor close to the VCC and GND pins and keep the associated return path short. Route the clock with adequate clearance from count outputs and switching-control traces to reduce false transitions. Because the counter uses positive-edge triggering, use clean edge transitions and verify setup and hold timing at the actual clock source rather than relying only on nominal frequency.
Use one defined logic level for every control input; do not leave unused control pins floating. When decoding the four outputs, include the counter’s propagation delay and decoder delay in the timing budget. Synchronous counting removes intermediate count spikes, but it does not eliminate propagation delay, clock skew, or ringing, all of which can still affect adjacent logic.
コンプライアンス情報
The cited manufacturer materials identify the SN74LS191 family but the supplied product excerpts do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not applicable to this standard 74LS logic device.