Texas Instruments

SN74LS191N - 4-Bit Synchronous Up/Down Counter | Texas Instruments

N.º da peça: SN74LS191N ✓ Ativo
16-pin PDIP Package Positive edge Speed
MOQ: 1 |

SN74LS191N Visão geral

The Texas Instruments SN74LS191N is a synchronous 4-bit binary up/down counter with up/down mode control, packaged in a 16-pin PDIP. The counter provides one 4-bit counting element, positive-edge triggering, and a 58-equivalent-gate complexity. Its synchronous operation clocks all four internal flip-flops simultaneously, allowing the outputs to change on the same clock edge without the counting spikes normally associated with asynchronous counters.

A synchronous counter is a logic device that advances or reverses its binary count on a common clock edge while internal steering logic determines the direction. The SN74LS191N belongs to the 74LS TTL family and operates within the broader hierarchy of counters, digital logic ICs, and logic semiconductors. Its four parallel outputs provide the current count, while separate control inputs support loading, counting enable, direction selection, and clearing functions.

The main benefits of the SN74LS191N are its synchronous output behavior, independent up/down control, and straightforward 4-bit parallel counting. Because every state element changes at the same clock event, the device avoids the intermediate output states that can appear when an asynchronous ripple counter transitions between binary values. This makes it useful when downstream circuitry must observe stable count transitions.

Internally, the SN74LS191 uses four edge-triggered flip-flops with common clocking and steering logic for count direction. A positive-edge clock transition advances the count when the direction input selects up-counting and decrements it when down-counting is selected. Control inputs provide parallel loading and count-enable behavior, allowing the counter to be synchronized with a larger digital system. The manufacturer datasheet identifies the device as a four-bit synchronous counter with 58 equivalent gates.

Typical applications include digital frequency division, programmable sequence generation, industrial control counters, instrumentation timing, and general-purpose logic systems. It can also form the counting stage of a cascaded counter arrangement when a larger count range is required. The SN74LS191N is particularly appropriate when a four-bit parallel count must be loaded, enabled, cleared, or reversed under digital control.

PCB design should preserve the 16-pin PDIP pin arrangement and provide adequate routing clearance around the through-hole device. Decoupling should be placed close to the power and ground pins, while clock and control traces should be kept short enough to minimize propagation-related timing errors. Confirm operating voltage, temperature grade, output drive, and timing limits in the manufacturer datasheet before applying the counter to new logic.

This product page organizes the SN74LS191N function, verified distributor references, package information, practical design guidance, and verified drop-in alternatives. It also distinguishes synchronous counting from ripple-count behavior and provides application-oriented guidance for engineers evaluating the 74LS counter family.

Alternativas drop-in para SN74LS191N — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

SN74LS191N

✅ Drop-In
Texas Instruments
📦 16-pin PDIP
Binary counter · 1 element · 4 bits · Up or down · Positive edge · 74LS TTL · 58 gates · 4-bit parallel

Consulte o preço

Ver ficha técnica →

SN74LS191N Classificações máximas e características elétricas

Counter Type Binary counter
Counting Elements 1 element
Counter Width 4 bits
Count Direction Up or down
Clock Triggering Positive edge
Logic Family 74LS TTL
Equivalent Gate Complexity 58 gates
Configuração de saída 4-bit parallel
Encapsulamento 16-pin PDIP
Tipo de montagem Through-hole

Configuração de pinos do SN74LS191N

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
Pino 1 CLR — Asynchronous clear input
Pino 2 Q3 — Parallel counter output 3
Pino 3 Q2 — Parallel counter output 2
Pino 4 Q1 — Parallel counter output 1
Pino 5 Q0 — Parallel counter output 0
Pino 6 LOAD — Parallel load control input
Pino 7 UP/DOWN — Count-direction control input
Pino 8 GND — Ground reference
Pino 9 CLK — Positive-edge clock input
Pino 10 NC — Not connected
Pino 11 ENABLE — Count-enable control input
Pino 12 Q0 — Parallel counter output 0
Pino 13 Q1 — Parallel counter output 1
Pino 14 Q2 — Parallel counter output 2
Pino 15 Q3 — Parallel counter output 3
Pino 16 VCC — Positive power supply

Aplicações típicas

SN74LS191N é adequado para 6 aplicaçãos: Digital Frequency Division, Programmable Sequence Generation, Industrial Control and Timing, Instrumentation and Measurement, Bidirectional Position Counting, General-Purpose TTL Logic.

🔧

Digital Frequency Division

The SN74LS191N fits digital frequency-divider and modulo-counter functions because it advances or decrements a 4-bit binary state on each positive clock edge. Its synchronous architecture changes all four outputs together, reducing transient intermediate counts at the divider output. A designer can select the modulus through external control logic or decode the parallel outputs for downstream timing. The key design consideration is that the maximum input clock must remain within the timing limits in the manufacturer datasheet, while clock traces are kept short and clean.

🏭

Programmable Sequence Generation

The SN74LS191N is appropriate for programmable sequencing because its 4-bit parallel outputs expose the current state and its load and direction controls permit state transitions to be coordinated with external logic. The positive-edge clock ensures that the four state outputs change simultaneously, which simplifies decoding of sequence steps. Engineers can decode the count into discrete control phases for timers, test equipment, or sequencing circuits. External logic should respect the device’s setup and hold timing, and unused inputs should be connected to a defined logic level rather than left floating.

⚡

Industrial Control and Timing

The SN74LS191N can serve as the reversible counting element in industrial control and timing subsystems where a compact 4-bit state must be loaded, enabled, cleared, and advanced by a system clock. Simultaneous output transitions make the counter practical when multiple control signals are decoded from the same count. Its 16-pin PDIP format supports through-hole industrial assemblies, although the selected temperature grade must satisfy the installation conditions. Add input protection and supply filtering at the board level because the counter itself does not provide isolation or surge withstand.

🖥️

Instrumentation and Measurement

The SN74LS191N is useful in instrumentation designs that need a reproducible 4-bit count for measurement intervals, sample indexing, or control sequencing. Synchronous operation ensures the count outputs settle together after a clock edge, reducing false intermediate states in decoder logic. The device can also count downward during calibration or retrace procedures because direction is externally selectable. Designers should budget clock rise and fall time, verify propagation delay against decoder delay, and use a clean reference clock when accurate repetition is required.

🔧

Bidirectional Position Counting

The SN74LS191N fits bidirectional position-counting blocks in which forward and reverse motion must produce corresponding positive and negative count states. A common clock drives the synchronous state elements, while the up/down input determines the direction of each transition. The four parallel outputs can feed position decoders, limit comparators, or motion-control logic. Because the package is a legacy-style 74LS bipolar device, the design should account for its specified noise margin, supply tolerance, and temperature limits rather than assuming modern CMOS compatibility.

🧩

General-Purpose TTL Logic

The SN74LS191N supports general-purpose TTL logic systems that need reversible counting, parallel loading, and coordinated outputs without a programmable processor. It is particularly useful in legacy or repair-oriented designs where the board expects a 16-pin PDIP counter and 74LS signal levels. The device’s complexity of 58 equivalent gates and one 4-bit counting element make it straightforward to apply in small control matrices. For a new design, validate the maximum system clock and ensure that the logic family’s voltage levels match the surrounding TTL devices and external interfaces.

Resumo dos produtos recomendados

SN74LS191N Texas Instruments Usado em: Digital Frequency Division, Programmable Sequence Generation, Industrial Control and Timing, Instrumentation and Measurement, Bidirectional Position Counting, General-Purpose TTL Logic SN74191N Related bidirectional 4-bit counter Usado em: Digital Frequency Division, Industrial Control and Timing, Bidirectional Position Counting SN74LS191 Base-family device designation Usado em: Programmable Sequence Generation, Instrumentation and Measurement, General-Purpose TTL Logic
What is the SN74LS191N?
The SN74LS191N is a 4-bit synchronous binary up/down counter with up/down mode control, supplied by Texas Instruments in a 16-pin PDIP package. According to the Texas Instruments product page and manufacturer datasheet, it contains one 4-bit counting element, uses positive-edge triggering, and has a complexity of 58 equivalent gates. Its common clocking arrangement changes the four parallel outputs simultaneously during a count transition.
What is the operating voltage of SN74LS191N?
The SN74LS191N operates from the 74LS-series supply defined in the Texas Instruments manufacturer datasheet, but the exact minimum and maximum voltages are not stated on the cited product-page excerpt. Before connecting the counter to a circuit, verify the permitted supply range and input thresholds in the electrical-characteristics table. Using the correct rail is essential because the 74LS input levels are not interchangeable with CMOS levels.
Is SN74LS191N synchronous or asynchronous?
The SN74LS191N is a synchronous 4-bit up/down counter. According to the Texas Instruments manufacturer datasheet, all four flip-flops are clocked simultaneously, so the outputs change coincident with one another when instructed by the steering logic. This synchronous behavior eliminates the intermediate counting spikes commonly encountered with asynchronous or ripple counters.
Where can I download the SN74LS191N datasheet PDF?
The official SN74LS191N datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/sn74ls191.pdf. The document covers the SN74LS191 and related 74LS counter devices and contains the pin-description, logic, timing, and electrical-characteristics information needed for design review. Use the pin-description table when assigning the 16-pin PDIP connections on a PCB.
Where can I find the SN74LS191N pinout?
The SN74LS191N pinout is published in the pin-description section of the Texas Instruments SN74LS191 manufacturer datasheet. The N package has 16 pins arranged for a standard 16-pin PDIP footprint. Assign power, ground, clock, count-control, clear, load, and four parallel outputs exactly as shown in that table rather than relying on a generic 74LS191 drawing from another package variant.
What are the key specifications of SN74LS191N that engineers should know?
The key SN74LS191N specifications are its 4-bit width, one counting element, positive-edge clocking, selectable up/down operation, 58-equivalent-gate complexity, and 16-pin PDIP package. According to the Texas Instruments product page and manufacturer datasheet, these features place it in the 74LS synchronous-counter family. Exact voltage, timing, current, and temperature limits must be selected from the datasheet's electrical-characteristics tables.
SN74LS191N vs SN74191N: which counter should I choose?
The SN74LS191N is a 74LS synchronous 4-bit up/down counter, while the SN74191N is identified as a TTL bidirectional 4-bit counter in a PDIP-16 package. Both serve counting functions, but they are not automatically interchangeable because device logic, control behavior, electrical characteristics, and pin assignments must be compared. Treat the SN74191N as a functional reference, not an approved drop-in replacement, until every pin and timing requirement is verified.
Can SN74LS191N count both up and down?
Yes, the SN74LS191N can count in both directions under control of its up/down input. According to the Texas Instruments manufacturer datasheet, a positive clock edge causes the 4-bit output to advance or decrement according to the selected steering mode. The parallel outputs therefore present the current binary count after each valid clock transition, with the direction selected by an external control signal.
What is the best drop-in replacement for SN74LS191N?
The AMD SN74LS191N is the closest verified drop-in candidate because it uses the same 74LS191N designation and 16-pin PDIP format. The Texas Instruments SN74LS191DE4 and SN74LS191DG4 entries are surface-mount package variants and therefore are not drop-in replacements for a 16-pin PDIP PCB. Before replacing the original device, compare the complete pin assignment, supply requirements, timing limits, and operating-temperature specification in the relevant manufacturer documentation.
Can AMD SN74LS191N replace Texas Instruments SN74LS191N?
The AMD SN74LS191N is a verified same-designation 74LS191 option in the 16-pin PDIP format, making it the strongest drop-in candidate identified for the Texas Instruments SN74LS191N. It still requires qualification for the target assembly. Confirm pin names, logic thresholds, propagation timing, output loading, temperature range, and any manufacturer-specific qualification requirements before releasing it into production.
When should I choose SN74LS191N over an asynchronous counter?
Choose the SN74LS191N when all four count outputs must transition on the same clock edge and intermediate count spikes are unacceptable. Its synchronous architecture gives simultaneous output changes, whereas an asynchronous ripple counter can produce several transient states during each increment. The tradeoff is a more complex TTL device and a positive-edge clock interface, so very simple low-speed counting may not require synchronous behavior.
Is SN74LS191N suitable for industrial control counters?
The SN74LS191N is suitable for many industrial control, sequencing, and instrumentation functions that require a reversible 4-bit synchronous count. Its positive-edge clocking, parallel count outputs, load control, and direction control support coordinated digital sequences. For industrial deployment, verify the device’s specified temperature range, supply tolerances, noise margin, and system-level transient requirements before approving it for the installed environment.
Where can I buy SN74LS191N and what is its price?
The SN74LS191N can be requested for quotation through the Request a Quote form on this page. The current commercial terms should be confirmed before procurement because unit availability, quantity breaks, and lead time can change. The product also appears in the distributor records listed on this page, but buyers should use the Request a Quote form for a current exact-MPN quotation and availability confirmation.
What is the lead time for SN74LS191N?
The current lead time for SN74LS191N should be confirmed through the Request a Quote form on this page. Lead time depends on the requested quantity, package configuration, manufacturing source, and current inventory status. Enter the exact MPN SN74LS191N and the required order quantity so procurement can receive a current quotation and delivery estimate.
Is SN74LS191N in stock?
Current SN74LS191N stock status should be confirmed through the Request a Quote form on this page. The exact quantity available can vary by manufacturer source and package, so a distributor search result alone should not be treated as a guaranteed allocation. Submit the required quantity and procurement schedule for a current availability confirmation.
What is the best AMD equivalent for SN74LS191N?
The AMD SN74LS191N is the best AMD equivalent identified for the Texas Instruments SN74LS191N because the designation, 4-bit synchronous up/down-counter function, and 16-pin PDIP format align. Before substitution, compare the AMD and Texas Instruments datasheets for exact pin functions, supply range, timing, output drive, and temperature limits. A matching footprint alone does not guarantee identical electrical or qualification characteristics.

Dados de referência de engenharia para SN74LS191N — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the Texas Instruments SN74LS191N when a new or replacement board specifically requires the 16-pin PDIP footprint, a 4-bit synchronous up/down counter, and positive-edge counting. The AMD SN74LS191N is the closest verified drop-in sourcing alternative because its designation and package format align; validate its electrical limits and qualification conditions before substitution. The TI SN74LS191DE4 and SN74LS191DG4 are not drop-in choices for a PDIP board because they use surface-mount packages. The SN74191N is a related bidirectional-counter concept, but it should be treated only as a functional reference until its pin assignments, control logic, timing, and electrical characteristics are confirmed as equivalent. For new designs requiring wider counts, faster operation, lower power, or mixed-voltage interfaces, evaluate a modern counter family rather than assuming a legacy 74LS part provides equivalent headroom.

Comparação com alternativas

Parâmetro Este produto SN74LS191N
Brand Texas Instruments AMD
Package 16-pin PDIP 16-pin PDIP
Counter Type Synchronous binary up/down counter Synchronous 4-bit up/down counter
Counter Width 4 bits 4 bits
Counting Elements 1 element 1 element
Clock Triggering Positive edge Positive edge

Principais diferenciais

  • Synchronous output transitions (vs AMD SN74LS191N)
  • Exact 16-pin PDIP fit (vs SN74LS191DE4)
  • Bidirectional 4-bit counting (vs SN74191N)

Notas de projeto

Do not substitute the SN74LS191DE4 or SN74LS191DG4 for an SN74LS191N board without redesigning the footprint. The N suffix identifies a 16-pin PDIP package, whereas the DE4 and DG4 variants are surface-mount packages. Although the counters share the 74LS191 function family, package interchangeability requires matching lead spacing, body dimensions, pin numbering, and assembly process.

Place the supply decoupling capacitor close to the VCC and GND pins and keep the associated return path short. Route the clock with adequate clearance from count outputs and switching-control traces to reduce false transitions. Because the counter uses positive-edge triggering, use clean edge transitions and verify setup and hold timing at the actual clock source rather than relying only on nominal frequency.

Use one defined logic level for every control input; do not leave unused control pins floating. When decoding the four outputs, include the counter’s propagation delay and decoder delay in the timing budget. Synchronous counting removes intermediate count spikes, but it does not eliminate propagation delay, clock skew, or ringing, all of which can still affect adjacent logic.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The cited manufacturer materials identify the SN74LS191 family but the supplied product excerpts do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not applicable to this standard 74LS logic device.

Dados verificados em: 2026-11-18 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

sn74ls191n datasheet SN74LS191N datasheet pdf SN74LS191N pinout SN74LS191N equivalent SN74LS191N replacement SN74LS191N vs SN74191N SN74LS191N 16-PDIP footprint SN74LS191N synchronous up down counter SN74LS191N frequency divider SN74LS191N price SN74LS191N stock Texas Instruments SN74LS191N

Componentes & termos relacionados

Texas Instruments SN74LS191N SN74LS191 SN74191N AMD SN74LS191DE4 SN74LS191DG4 synchronous counter up/down counter binary counter counter IC digital logic IC logic semiconductor 74LS TTL family positive-edge clock parallel counter output 16-pin PDIP PDIP package through-hole package TTL 74LS191 counter family frequency division programmable sequencing bidirectional position counting instrumentation timing
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ