Texas Instruments

SN75159N - Dual RS-422/485 Driver | Texas Instruments

部品番号: SN75159N ✓ 生産中
5 V Vdss ANSI EIA/TIA-422-B and ITU Recommendation V.11 Rds(on) 14-pin PDIP Package
MOQ: 1 |

SN75159N 概要

Texas Instruments SN75159N is a dual differential RS-422/RS-485 line-driver interface IC with two independently controlled outputs, 3-state operation, and a 14-pin PDIP package. It operates from a single 5 V supply and provides TTL-compatible balanced line operation for industrial data links. Each driver includes an individual output control, allowing its associated outputs to enter a high-impedance state for party-line or shared-bus arrangements.

A differential line driver is an interface IC that converts logic-level signals into balanced differential outputs suitable for reliable, noise-resistant communication over cables. The SN75159 belongs to the RS-422 driver family within the broader interface-IC and bus-transceiver hierarchy. Its differential outputs help reject common-mode noise, while the 3-state capability prevents an inactive driver from loading a shared bus.

The device provides two differential driver channels, single 5 V operation, TTL-compatible inputs, and independent controls for each channel. When its output-control input is low, the corresponding output pair becomes high-impedance and can neither drive nor load the bus. This behavior supports multiple transmitters sharing a party-line bus when only one driver is intended to be active at a time. The manufacturer identifies the SN75159 as meeting or exceeding ANSI EIA/TIA-422-B and ITU Recommendation V.11 requirements.

The SN75159 is a driver rather than a full transceiver: it does not include receiver channels for returning data from the bus. Its 14-pin PDIP construction is appropriate for through-hole industrial, control, instrumentation, and legacy communication equipment where socketed or manually assembled DIP packaging is preferred. Because each channel can be disabled independently, the device can support multiple physical drivers on one bus when their active intervals are properly coordinated.

Typical uses include industrial automation links, RS-422 point-to-point links, multidrop party-line systems, test equipment, process-control instrumentation, and data acquisition systems requiring balanced differential signaling. The 5 V supply and TTL-compatible control interface simplify connection to older logic systems, while independent channel control supports bus segmentation or spare-driver arrangements.

The primary design consideration is ensuring that only one transmitter actively drives a shared bus at a time. Output-enable timing, grounding, cable termination, and driver-output loading must be evaluated together. The differential outputs should connect to the intended RS-422 network using an appropriate cable and termination scheme; the manufacturer datasheet should be consulted for the complete electrical limits and pin assignments.

This page organizes the SN75159N interface function, verified operating characteristics, practical use cases, and design cautions into an engineering-focused guide. It also separates confirmed product information from parameters that require direct confirmation with the manufacturer before schematic release or production procurement.

ドロップイン代替品: SN75159N — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

SN75159N 仕様

Product Type Dual differential line driver
Driver Configuration 2 differential driver channels
Logic Compatibility TTL compatible
電源電圧 5 V
Supported Standards ANSI EIA/TIA-422-B and ITU Recommendation V.11
Interface Classification RS-422/RS-485 driver
Output State Control Independent control for each driver
Disabled Output Impedance High impedance
Line Operation Balanced differential
Bus Arrangement Party-line operation
Package Type 14-pin PDIP
実装タイプ Through-hole
Datasheet Revision Rev. B

SN75159N 14-pin pdip ピン配置ガイド

SN75159N (14-pin pdip パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

SN75159N の 14-pin pdip パッケージピン配置図

詳細なピン配置データはありません: SN75159N.

詳細は データシート をご参照ください。

主な用途

SN75159N の用途: 6 件s: Industrial RS-422 Automation Links, RS-485 Transmitter-Only Interface, Party-Line Data Bus, Process-Control Instrumentation, Data Acquisition Equipment, Legacy Test and Measurement Systems.

🏭

Industrial RS-422 Automation Links

The SN75159N suits industrial control equipment that sends TTL-compatible commands or sensor data over a balanced differential line. Its two driver channels provide separate transmit paths, while differential signaling improves common-mode-noise tolerance over longer industrial cables. The single 5 V supply simplifies integration with legacy controller logic. The 14-pin PDIP package also supports socketed assembly and field-serviceable through-hole boards. Designers should pair the device with an RS-422 receiver when the remote endpoint must return data, and verify timing and cable termination against the manufacturer specifications.

🌐

RS-485 Transmitter-Only Interface

The SN75159N can implement the transmit side of an RS-485 interface because it provides two differential drivers and independent 3-state output controls. A separate receiver is required when the system must detect incoming bus data. This arrangement is useful for controllers that periodically command field devices while accepting replies through a dedicated receive path. Because multiple transmitters may share the bus, firmware and hardware must ensure that only one channel drives the line during a given interval. Differential routing, grounding, and termination remain important for dependable operation.

🔧

Party-Line Data Bus

The SN75159N is designed for party-line operation in which multiple transmitters can connect to one balanced bus. According to the manufacturer datasheet, driving an output-control input low forces the associated outputs into a high-impedance state so that an inactive driver does not load the line. The two independently controlled channels can address separate nodes or implement prioritized access. Correct arbitration timing is essential because only one transmitter should actively drive the bus at a time. The design should also account for propagation delay, enable settling time, cable length, and the termination required by the network topology.

💊

Process-Control Instrumentation

The SN75159N can transmit control and measurement information from process-control instrumentation over a balanced differential connection. Its two independent driver channels reduce the need for separate line-driver ICs when a controller has two outbound signal paths. TTL-compatible logic control and a 5 V supply support integration with conventional control electronics. The PDIP format is useful for instrument panels and legacy industrial systems assembled for maintainability. Engineers must define grounding and isolation requirements, select suitable cable termination, and confirm that the electrical output levels match the selected RS-422 receiver and cable length.

🖥️

Data Acquisition Equipment

The SN75159N is useful in data-acquisition systems that distribute commands or collect outputs through differential communication channels. Two independent 3-state drivers permit one channel to remain inactive while the other communicates, avoiding unwanted bus loading during test-sequence changes. The device's balanced outputs are intended for robust transmission over longer cables compared with single-ended logic. For acquisition systems that need bidirectional links, pair it with a suitable receiver and define the direction-control logic around the output-enable pins. Validate channel timing, output loading, and ground potential before connecting external equipment.

🔧

Legacy Test and Measurement Systems

The SN75159N fits legacy test and measurement equipment that uses a 5 V supply, TTL-compatible controls, and a through-hole interface IC. It can provide two balanced outputs for driving remote instruments, fixtures, or communication peripherals while allowing each channel to be disconnected electrically from a shared line. The 14-pin PDIP format simplifies socket-based prototyping and maintenance in established instrument platforms. Confirm the device's electrical limits and enable timing in the manufacturer datasheet, maintain consistent signal grounding, and observe the output-state restrictions whenever more than one driver shares a conductor.

おすすめ製品の概要

SN75159 Base manufacturer product family 使用用途: Industrial RS-422 Automation Links, RS-485 Transmitter-Only Interface, Party-Line Data Bus, Process-Control Instrumentation, Data Acquisition Equipment, Legacy Test and Measurement Systems SN75159N Texas Instruments 使用用途: Industrial RS-422 Automation Links, RS-485 Transmitter-Only Interface, Party-Line Data Bus, Process-Control Instrumentation, Data Acquisition Equipment, Legacy Test and Measurement Systems
What is the SN75159N?
The SN75159N is a Texas Instruments dual differential line-driver interface IC with two independently controlled 3-state outputs. According to the manufacturer datasheet, it is designed for RS-422 and RS-485 balanced line operation from a single 5 V supply. The device comes in a 14-pin PDIP package and includes separate output controls for its two driver channels.
What are the key specifications of SN75159N that engineers should know?
The SN75159N provides two differential driver channels, a single 5 V supply, TTL-compatible interfacing, and independent 3-state output control in a 14-pin PDIP package. According to the Texas Instruments datasheet, it meets or exceeds ANSI EIA/TIA-422-B and ITU Recommendation V.11 requirements. Its differential outputs support balanced, noise-resistant bus communication, while the two controls permit each channel to be disabled independently.
Where can I download the SN75159N datasheet PDF?
The official SN75159N datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/sn75159.pdf. It is the Rev. B document and contains the electrical characteristics, operating information, application details, and package information. Use this manufacturer document when assigning pins, checking voltage and current limits, or laying out an RS-422 interface.
Where can I find the SN75159N pinout?
The SN75159N pin assignments are shown in the pin-configuration section of the official Texas Instruments SN75159 datasheet at https://www.ti.com/lit/ds/symlink/sn75159.pdf. The part uses a 14-pin PDIP package, so verify all signal, enable, supply, and ground connections against that diagram before laying out the PCB or wiring the device.
Can SN75159N drive an RS-485 bus?
The SN75159N can serve as an RS-485-style transmitter for balanced differential signaling, but it is a driver-only device and does not contain RS-485 receiver channels. According to the Texas Instruments datasheet, it is designed for RS-422 and RS-485 differential line-driver applications. A complete two-way RS-485 interface therefore requires a separate receiver and the appropriate bus-direction and biasing circuitry.
What does 3-state output mean for the SN75159N?
A 3-state output can actively drive the line, hold the line in the high-impedance state, or present the inactive output state defined by the device. According to the manufacturer datasheet, pulling an output-control input low places the associated driver outputs in a high-impedance state so they cannot drive or load the bus. This permits multiple transmitters to share a party-line bus.
Why does the SN75159N have two output-control inputs?
The SN75159N has an individual output control for each of its two differential drivers. According to the Texas Instruments datasheet, each channel can be placed in a high-impedance state independently. This lets a system disable one transmitter while keeping the other active, supporting bus segmentation, redundant routing, or shared-bus designs where active-driver intervals must be coordinated.
SN75159N vs SN75158 - which is better for a shared bus?
The SN75159N is the better choice when each of its two transmitters must be independently disabled. According to the manufacturer datasheet, it adds individual output controls to the features of the SN75158 line driver. The SN75159N therefore offers two independently controlled high-impedance driver channels, whereas the SN75158 does not provide that added output-control feature.
What is the difference between SN75159N and a full RS-485 transceiver?
The SN75159N is a two-channel differential transmitter, while a full RS-485 transceiver also includes differential receivers for detecting returning data. According to the Texas Instruments product information, the SN75159 is a dual differential line driver with 3-state outputs. Use it for transmit-only or transmit-focused interfaces, and add a receiver when bidirectional data reception is required.
When should I choose SN75159N over a single-channel RS-422 driver?
Choose the SN75159N when the board needs two independently enabled differential driver channels and can accommodate its 14-pin PDIP footprint. Its two channels can operate separately or feed separate balanced lines, while individual controls provide a way to place either transmitter in a high-impedance state. A single-channel driver may be simpler when only one fixed transmit path is required.
Is SN75159N suitable for industrial automation equipment?
The SN75159N is suitable for industrial automation equipment that uses balanced differential communications and a 5 V interface. Its two independent 3-state channels support party-line arrangements, and the manufacturer states that the device meets or exceeds ANSI EIA/TIA-422-B and ITU Recommendation V.11 requirements. The through-hole PDIP package is particularly convenient for industrial controller boards assembled with sockets.
What is the best drop-in replacement for SN75159N?
No verified drop-in replacement for the SN75159N was identified in the available manufacturer and cross-reference information. A replacement should not be selected from a family association alone: it must use the same 14-pin PDIP footprint, preserve both differential channels, provide independent 3-state controls, and meet the required RS-422 output and timing specifications.
What can replace SN75159N without PCB changes?
A component can replace the SN75159N without PCB changes only if it is pin-to-pin compatible with the 14-pin PDIP footprint and preserves the same electrical interface. No confirmed same-footprint substitute is listed here. Compare enable polarity, output impedance, differential output voltage, propagation delay, supply current, and 3-state behavior against the Texas Instruments datasheet before approving a substitution.
Where to buy SN75159N online?
Use the Request a Quote form on this page to request current SN75159N supply, order quantity, and lead-time information for the 14-pin PDIP package. The manufacturer product page is https://www.ti.com/product/SN75159. XAIPART can then confirm current channel availability and applicable order details without relying on a static price or stock claim.
What is the price and lead time of SN75159N?
Submit the SN75159N request through the Request a Quote form on this page for current pricing, stock status, minimum order quantity, and lead time. Current commercial conditions can vary by order quantity and package form. The manufacturer identifies the base device as SN75159, while SN75159N denotes the 14-pin PDIP ordering option.

エンジニアリング参考データ: SN75159N — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose SN75159N when a design needs two balanced differential transmitter channels, independent 3-state control, and a 14-pin PDIP footprint. It is especially useful in RS-422 point-to-point links, transmitter-only RS-485 arrangements, and party-line systems where inactive drivers must be disconnected from the bus. Select a receiver separately when the endpoint must return data, and coordinate output-enable timing so two channels never drive the same pair simultaneously. If only one fixed transmit path is needed, a single-channel driver may reduce board complexity. Before approving any alternative, require evidence of the same 14-pin footprint, enable polarity, differential output characteristics, timing, supply current, and high-impedance behavior; a similar bus function alone does not establish drop-in compatibility.

代替品との比較

パラメータ この製品
Product Type Dual differential line driver
Driver Channels 2
Supply Voltage 5 V
Interface RS-422/RS-485 transmitter
Output Control Independent control for each driver
Disabled Output State High impedance
Package 14-pin PDIP
Brand Texas Instruments
Standards ANSI EIA/TIA-422-B and ITU Recommendation V.11

主な差別化要因

  • Independent output disable for each differential channel (vs SN75158)
  • Two balanced transmit paths in one device (vs SN75158)
  • Shared-bus isolation through 3-state outputs (vs SN75158)

設計ノート

Ensure that no two transmitters actively drive the same differential pair at the same time. According to the manufacturer datasheet, an output-control input in its low state places the associated SN75159N outputs in a high-impedance state, preventing them from driving or loading the bus. Use non-overlapping control timing and include adequate settling time before changing a channel's output state.

Route each differential driver pair as a closely coupled pair and keep it away from unrelated switching nodes and high-current paths. Maintain a continuous ground reference for the interface circuit and follow the connection and termination guidance in the Texas Instruments datasheet. The 14-pin PDIP footprint should be checked against the official pin-configuration diagram before drill or wiring work begins.

Treat output-enable timing as part of the interface budget rather than as an afterthought. Allow for both the channel's propagation delay and the time required for a high-impedance output to stop loading the line before another transmitter is enabled. In party-line systems, test worst-case enable overlap, cable length, receiver loading, and termination because these factors determine whether the bus remains usable during transitions.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer datasheet confirms ANSI EIA/TIA-422-B and ITU Recommendation V.11 compatibility, but explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements were not present in the cited source material.

データ検証日: 2026-11-09 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

SN75159N datasheet SN75159N pinout SN75159N datasheet pdf Texas Instruments SN75159N SN75159N RS-422 driver SN75159N RS-485 interface SN75159N 14-pin PDIP SN75159N drop-in replacement SN75159N equivalent SN75159N vs SN75158 SN75159N price SN75159N stock SN75159N party-line operation what is SN75159N

関連部品&用語

Texas Instruments SN75159N SN75159 SN75158 dual differential line driver RS-422 RS-485 interface IC bus transceiver TTL-compatible logic 3-state output high-impedance output differential signaling balanced line operation party-line bus ANSI EIA/TIA-422-B ITU Recommendation V.11 14-pin PDIP PDIP package through-hole mounting semiconductor output-enable control industrial automation process-control instrumentation
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示