SP3232EBCP-L - 250kbps Dual RS-232 Transceiver | MaxLinear
部品番号: SP3232EBCP-L ✓ 生産中SP3232EBCP-L 概要
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 bipolar levels and converts incoming RS-232 signals back into digital logic. RS-232 belongs to the interface-IC hierarchy and is commonly used for point-to-point serial links in computer, industrial-control, instrumentation, and embedded systems. Its differential bipolar signaling provides noise immunity and voltage margins suited to cable-based communication.
The SP3232EBCP-L offers two transmit channels and two receive channels, allowing one integrated component to handle bidirectional serial communication. Its 250 kbps rated transmission rate supports substantially faster data transfer than legacy limited-rate serial interfaces. Operation from a single 3.0 V to 5.5 V supply also allows the same circuit to work with 3.3 V and 5 V system rails.
Its charge-pump circuitry generates the positive and negative voltage levels required by true RS-232 operation. Four external 0.1 µF capacitors support the charge pump and associated voltage generation. According to the MaxLinear SP3232EB family information, the charge-pump architecture requires only 0.1 µF capacitors for 3.3 V operation, helping reduce board area while preserving compliant line-driver levels.
Typical applications include industrial serial controllers, portable data-acquisition equipment, computer peripherals, instrument interfaces, and embedded systems that exchange RS-232 commands or data. The two transmitters and two receivers are useful where a device must support more than one serial channel or provide separate transmit and receive connections on each port.
PCB design should place the four charge-pump capacitors close to their associated pins, preserve the recommended routing geometry, and provide uninterrupted ground-plane continuity beneath the device. Check that the host interface uses the correct RS-232 logic levels and cable connection because the SP3232EBCP-L does not directly accept TTL signals without the transceiver’s level translation.
This product record combines the SP3232EB family specifications with practical interface-selection guidance, including same-footprint alternatives, charge-pump layout considerations, application fit, and a parameter-by-parameter comparison for engineering review.
ドロップイン代替品: SP3232EBCP-L — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: SP3232EBCP-L (同一形状・フットプリント) — 相違点: Data Rate, Mounting Type, Package, Packaging, RoHS Status.
SP3222EBEY-L/TR
✅ ドロップイン価格はお問い合わせください
データシートを見る →SP3232EBCN-L/TR
✅ ドロップイン✓ 在庫あり
$0.7711 / 個
データシートを見る →SP3232EBCP
✅ ドロップイン📋 参考代替品(カタログ未掲載)
SP3222EBCP
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
SP3232EBCP-L 仕様
| Product Type | RS-232 transceiver |
| Number of Transmitters | 2 |
| Number of Receivers | 2 |
| データレート | 250 kbps |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Typical Supply Current | 0.3 mA |
| Internal Charge Pump | Yes |
| Number of External Capacitors | 4 |
| Nominal External Capacitor Value | 0.10 µF |
| RS-232 Standards Compliance | True EIA/TIA-232-F operation |
| Power Supply Type | Single supply |
| パッケージ | 28-pin LQFP |
| 実装タイプ | Surface mount |
| Receiver Shutdown Current | 1 µA for SP3222EB |
SP3232EBCP-L 28-pin lqfp ピン配置ガイド
SP3232EBCP-L (28-pin lqfp パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: SP3232EBCP-L.
詳細は データシート をご参照ください。
主な用途
SP3232EBCP-L の用途: 6 件s: Industrial Serial Control, Portable Data Acquisition, Computer Peripherals, Test and Measurement Instruments, Embedded Serial Bridges, Network and Communication Equipment.
Industrial Serial Control
The SP3232EBCP-L fits industrial control equipment that requires two RS-232 channels for command, status, and configuration links. Its two transmitters and two receivers provide balanced channel density in a single 28-pin LQFP, while the 250 kbps capability supports responsive device communication. Operating from 3.0 V to 5.5 V permits use with either 3.3 V control electronics or 5 V legacy equipment. The internal charge pump and four 0.1 µF capacitors simplify the bipolar voltage generation required for true EIA/TIA-232-F operation.
おすすめ
Portable Data Acquisition
Portable instruments and data-acquisition units can use the SP3232EBCP-L to communicate with a host computer over RS-232. The 250 kbps rate provides sufficient throughput for command traffic, sampled status data, and configuration transfers, while the single 3.0 V to 5.5 V supply reduces the number of external rails needed in compact equipment. Its integrated charge pump generates the required positive and negative RS-232 levels using only four 0.1 µF external capacitors, conserving board area in portable designs.
おすすめ
Computer Peripherals
The SP3232EBCP-L is appropriate for legacy computer peripherals that communicate through an RS-232 port. Two transmitters and two receivers allow separate transmit and receive paths, and the 250 kbps transmission rate supports conventional serial-control protocols. Its ability to operate from either 3.3 V or 5 V assists designers bridging modern embedded controllers with established RS-232 equipment. True RS-232 output levels are produced by the internal charge pump, but the host connector still requires the correct bipolar signal and ground wiring.
おすすめ
Test and Measurement Instruments
The SP3232EBCP-L can provide the serial interface in analyzers, calibrators, and laboratory instruments that exchange commands or measurement records with a controller. Two channels reduce the external interface-component count when both command and data paths are required, and the 250 kbps rate supports moderate-rate telemetry. The 3.0 V to 5.5 V supply range simplifies integration with mixed-voltage test equipment, while the internal charge pump avoids a separate bipolar supply generator.
おすすめ
Embedded Serial Bridges
The SP3232EBCP-L is useful in embedded systems that must translate a host UART into a fully compliant RS-232 connection. A microcontroller can manage the serial protocol while the transceiver handles bipolar level conversion and charge-pump voltage generation. The 250 kbps rate is suitable for many control, bootloader, and telemetry protocols, and the two-channel arrangement supports two independent links. Because the device accepts logic-level signaling internally, careful grounding and cable selection remain essential for reliable communication.
おすすめ
Network and Communication Equipment
RS-232 is still common in network-management equipment, console servers, and specialized communication modules, and the SP3232EBCP-L can provide two interface channels for equipment control. Its 250 kbps rating accommodates console, status, and configuration traffic, while the single-supply operation simplifies integration into systems using either 3.3 V or 5 V logic. The internal charge pump provides the positive and negative voltage levels required for true RS-232, although long cable runs and electrically noisy installations should be evaluated for signal-integrity margin.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: SP3232EBCP-L — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | SP3222EB | SP3232EB | SP3232EBCP | SP3222EBCP |
|---|---|---|---|---|---|
| Package | 28-pin LQFP | 28-pin LQFP | 28-pin LQFP | 28-pin LQFP | 28-pin LQFP |
| Brand | MaxLinear, Inc. | MaxLinear, Inc. | MaxLinear, Inc. | MaxLinear, Inc. | MaxLinear, Inc. |
| Number of Transmitters | 2 | 2 | 2 | 2 | 2 |
| Number of Receivers | 2 | 2 | 2 | 2 | 2 |
| Data Rate | 250 kbps | 250 kbps | 250 kbps | 250 kbps | 250 kbps |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| External Capacitors | 4 × 0.1 µF | 4 × 0.1 µF | 4 × 0.1 µF | 4 × 0.1 µF | 4 × 0.1 µF |
| Ordering Suffix | -L | Family code | Family code | Base ordering code | Base ordering code |
主な差別化要因
- Two full-duplex RS-232 channels in one device (vs SP3222EBCP)
- True RS-232 performance at 250 kbps (vs SP3222EB)
- Single 3.0 V to 5.5 V operation (vs SP3232EBCP)
- Compact charge-pump implementation (vs SP3222EBCP)
設計ノート
Place all four 0.1 µF charge-pump capacitors as close as practical to their associated SP3232EBCP-L pins. Keep capacitor loops compact and route the grounded terminals directly to the associated ground pins. Avoid placing sensitive analog or high-speed digital traces beneath charge-pump switching nodes. The MaxLinear SP3232EB family uses this four-capacitor arrangement, making placement geometry an important part of preserving transmitter performance.
Do not treat the SP3232EBCP-L as a TTL-to-RS-232 logic substitute with interchangeable enable and shutdown functions. Related SP3222EB and SP3232EB devices can differ in power-saving behavior, so assign every input after checking the exact manufacturer pin-description table. Also verify connector polarity: an incorrectly wired RS-232 interface can produce negative driver voltages on receiver inputs despite a correct PCB footprint.
Maintain a continuous ground reference beneath the LQFP and minimize loop area around the charge-pump network. Separate the interface from switching power stages and high-current return paths, and use a solid plane rather than fragmented ground traces. If the board also supports other communications interfaces, keep the RS-232 connector-side protection and cable routing away from sensitive analog inputs to reduce transient and ground-bounce coupling.
The SP3232EBCP-L operates from a single 3.0 V to 5.5 V supply, but its charge-pump and line-driver circuitry still require clean decoupling and correct capacitor tolerances. Place the recommended local supply bypass capacitor near the supply pins and follow the manufacturer’s voltage and capacitance requirements. Confirm that the host logic voltage matches the transceiver’s digital input and output thresholds rather than assuming compatibility from the connector interface alone.
コンプライアンス情報
No product-specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified. The -L ordering suffix should be checked against the manufacturer ordering table before making a compliance claim.