SPC5602BF2CLL4 - 32-Bit 48MHz 256KB Flash Automotive MCU
部品番号: SPC5602BF2CLL4 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
SPC5602BF2CLL4 概要
A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and communication interfaces into one embedded-control component. The SPC5602BF2CLL4 represents a 32-bit MCU platform rather than a discrete logic IC or analog component. Within the product hierarchy, it is a microcontroller, embedded processor, semiconductor, and programmable control device. Its automotive positioning makes it relevant to body-electronics modules, sensor-conditioning systems, actuator controllers, gateway electronics, and industrial equipment requiring deterministic embedded processing.
The key verified features are the 48 MHz operating frequency, 256 KB Flash memory, 32-bit architecture, dual-core architecture, and 100-LQFP package. The NXP result also describes enhanced security for automotive applications. The package provides 100 gull-wing terminals and is suitable for surface-mount PCB assembly. The operating temperature is listed as -40 °C to +85 °C, matching the automotive and industrial-oriented device positioning. Distributor results classify the part as an automotive-grade QFP-100 microcontroller.
SPC5602BF2CLL4 uses the e200z0h Power Architecture core according to the DigiKey listing, although the core identity should be confirmed against the exact manufacturer datasheet before critical design release. The device is offered in a 100-LQFP, 14 x 14 mm package. The verified snippets do not provide complete peripheral inventories, memory-map details, electrical limits, watchdog behavior, clock tree settings, or security implementation details; these parameters should therefore be obtained from the official NXP documentation before schematic or firmware sign-off.
Typical automotive uses include body-control modules, motor and relay control, sensor-interface controllers, gateway nodes, and centralized body electronics. Its dual-core architecture can support partitioned real-time workloads when the firmware architecture is designed around the available cores and peripherals. The 256 KB Flash capacity is suitable for moderate embedded applications rather than large graphical user interfaces or highly data-intensive edge-computing systems.
A key design consideration is to verify the complete pin multiplexing, power-supply requirements, clock configuration, reset behavior, and peripheral availability in the manufacturer datasheet. PCB layout should provide controlled power and ground distribution, decoupling close to the device, and adequate routing clearance for the 0.5 mm-pitch-class LQFP package. Firmware qualification should include boundary tests for temperature, supply voltage, communication interfaces, and safety diagnostics relevant to the intended automotive or industrial system.
This page combines verified distributor specifications, manufacturer product information, package data, application guidance, and cross-reference validation resources. It is intended to support engineering selection and sourcing while clearly separating verified values from parameters that still require manufacturer documentation.
ドロップイン代替品: SPC5602BF2CLL4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: SPC5602BF2CLL4 （同一形状・フットプリント） — 相違点: Package.
クイック比較ツール — 並列比較する代替部品を選択:
SPC5602BK0CLQ4
✅ ドロップイン📋 参考代替品（カタログ未掲載）
SPC5606BF1VLU6R
✅ ドロップイン✓ 在庫あり
$11.1 / 個
データシートを見る →SPC5602BF2CLL4 最大定格＆電気的特性
| Product Type | 32-bit microcontroller |
| Architecture | Dual-core |
| Processor Core | Power Architecture e200z0h |
| Maximum Operating Frequency | 48 MHz |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| Word Width | 32 bits |
| Application Classification | Automotive Grade |
| 動作温度 | -40 °C to +85 °C |
| パッケージ | 100-LQFP |
| Package Dimensions | 14 mm x 14 mm |
| Terminal Count | 100 terminals |
| Terminal Form | Gull wing |
| 実装タイプ | Surface mount |
| Security Feature | Enhanced security for automotive applications |
| メモリタイプ | Flash |
| Supplier Classification | Embedded - Microcontrollers |
| ライフサイクル状態 | Active |
SPC5602BF2CLL4 14 mm x 14 mm ピン配置ガイド
SPC5602BF2CLL4 (14 mm x 14 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: SPC5602BF2CLL4.
詳細は データシート をご参照ください。
主な用途
SPC5602BF2CLL4 の用途: 6 件s: Automotive Body-Control Module, Automotive Sensor-Interface Controller, Vehicle Gateway and Communication Node, Industrial Motor and Relay Controller, Actuator and Relay Interface Module, Embedded Diagnostic Controller.
Automotive Body-Control Module
SPC5602BF2CLL4 fits a body-control module that coordinates switches, lamps, locks, relays, and diagnostic inputs. Its verified 32-bit Power Architecture core, dual-core architecture, 48 MHz operation, and automotive-grade positioning provide a suitable control platform for real-time embedded tasks. The 100-LQFP package provides a defined high-pin-count integration footprint, while 256 KB Flash is relevant for moderate firmware and configuration storage. Final use should confirm power, CAN or other communication interfaces, diagnostic channels, and safety requirements in the NXP datasheet.
おすすめ
Automotive Sensor-Interface Controller
Use the SPC5602BF2CLL4 as a controller for distributed automotive sensors when the system needs deterministic embedded processing and diagnostic handling. The verified 48 MHz maximum frequency and dual-core architecture can support partitioned sensing, filtering, and communication tasks, while the -40 °C to +85 °C specification is suitable for many vehicle environments. The exact ADC, timer, communication, and sensor interfaces are not present in the supplied snippets and must be verified before selecting the MCU for a specific sensor architecture.
おすすめ
Vehicle Gateway and Communication Node
SPC5602BF2CLL4 can be evaluated for a vehicle communication gateway when a high-pin-count MCU, dual-core architecture, and automotive-oriented security positioning are valuable. The 100-LQFP package can support dense mixed-signal and communication routing on a multilayer PCB, while 256 KB Flash provides room for gateway firmware, diagnostics, and configuration data. Network transceiver selection, bus protection, wake-up behavior, and exact peripheral availability must be verified from the manufacturer documentation rather than inferred from the product summaries.
おすすめ
Industrial Motor and Relay Controller
The SPC5602BF2CLL4 is a candidate for industrial motor, relay, and sequencing controller applications because its verified 48 MHz 32-bit processing and dual-core architecture can organize control and supervisory functions. The -40 °C to +85 °C operating range supports industrial environments beyond typical consumer conditions, and the 100-LQFP package offers many external signal connections. Before design-in, verify timer resolution, PWM resources, analog functions, communication peripherals, and electrical limits in the official datasheet.
おすすめ
Actuator and Relay Interface Module
SPC5602BF2CLL4 can support an actuator interface module that converts sensed conditions into controlled outputs for pumps, valves, locks, or relays. Its dual-core architecture may help separate deterministic output management from supervisory or diagnostic logic, provided the firmware and memory map are designed accordingly. The 100-LQFP footprint allows integration with multiple external drivers and interface components, but the exact GPIO count, pin multiplexing, voltage domains, and timing characteristics are not supplied and must be confirmed before schematic release.
おすすめ
Embedded Diagnostic Controller
The SPC5602BF2CLL4 is relevant to diagnostic controller designs that combine embedded software with vehicle or industrial status reporting. Its 32-bit Power Architecture core, 48 MHz operation, 256 KB Flash, and automotive-grade classification provide a suitable baseline for diagnostics, fault logging, and communication management. The enhanced-security claim in the NXP product result should be evaluated against the specific security implementation, boot and debug protections, cryptographic requirements, and update architecture documented for the exact variant.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: SPC5602BF2CLL4 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | SPC5602BK0CLQ4 | SPC5606BF1VLU6R |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
主な差別化要因
- Verified dual-core positioning （vs SPC5602BK0CLQ4)
- Verified 48 MHz operating class （vs SPC5606BF1VLU6R)
- Automotive-focused security positioning （vs SPC5602BK0CLQ4)
設計ノート
Design the PCB footprint and land pattern from the official NXP package drawing rather than the generic distributor description. The verified package is a 100-LQFP with gull-wing leads, but pin pitch, exposed-pad details, solder-mask clearance, and recommended land geometry are not supplied. Confirm pin numbering, lead width, courtyard, paste pattern, and assembly tolerances before releasing the PCB layout.
Use the manufacturer power-supply and decoupling recommendations before placing the MCU. The verified data does not state the complete supply voltage range, current consumption, internal regulator behavior, or pin-specific power requirements. Place required bypass capacitors close to their associated power pins, provide a clean return path, and verify startup, brownout, reset, and power-sequencing behavior with the final schematic.
Treat clock, reset, debug, and high-speed communication routes as controlled signals. The supplied data confirms a 48 MHz maximum operating frequency but does not identify all high-speed interfaces or timing margins. Use short return paths, continuous reference planes where appropriate, controlled impedance for external links, and deliberate separation between sensitive analog or communication routes and switching-power nodes.
Validate junction temperature and board temperature at the maximum ambient temperature of +85 °C and at the highest expected automotive or industrial switching workload. The verified data gives no thermal resistance, power consumption, or maximum junction-temperature value, so any thermal calculation is premature. Use the exact NXP electrical data and the final PCB stack-up, copper area, enclosure airflow, and power-loss estimate during qualification.
Do not design from search snippets alone. The verified sources conflict on the Flash value, reporting 256 KB in distributor results and 192 KB in one NXP snippet. Confirm memory size, pin assignments, peripheral availability, security features, and automotive qualification using the exact manufacturer datasheet and quality documentation for the ordered MPN before committing PCB or firmware changes.
コンプライアンス情報
The supplied search results identify the device as automotive grade but do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. These fields must be confirmed from current NXP documentation and supply-chain declarations.
