SPC5602BF2CLL4 - 32-Bit 48MHz 256KB Flash Automotive MCU
MPN: SPC5602BF2CLL4 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
SPC5602BF2CLL4 Overview
A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and communication interfaces into one embedded-control component. The SPC5602BF2CLL4 represents a 32-bit MCU platform rather than a discrete logic IC or analog component. Within the product hierarchy, it is a microcontroller, embedded processor, semiconductor, and programmable control device. Its automotive positioning makes it relevant to body-electronics modules, sensor-conditioning systems, actuator controllers, gateway electronics, and industrial equipment requiring deterministic embedded processing.
The key verified features are the 48 MHz operating frequency, 256 KB Flash memory, 32-bit architecture, dual-core architecture, and 100-LQFP package. The NXP result also describes enhanced security for automotive applications. The package provides 100 gull-wing terminals and is suitable for surface-mount PCB assembly. The operating temperature is listed as -40 °C to +85 °C, matching the automotive and industrial-oriented device positioning. Distributor results classify the part as an automotive-grade QFP-100 microcontroller.
SPC5602BF2CLL4 uses the e200z0h Power Architecture core according to the DigiKey listing, although the core identity should be confirmed against the exact manufacturer datasheet before critical design release. The device is offered in a 100-LQFP, 14 x 14 mm package. The verified snippets do not provide complete peripheral inventories, memory-map details, electrical limits, watchdog behavior, clock tree settings, or security implementation details; these parameters should therefore be obtained from the official NXP documentation before schematic or firmware sign-off.
Typical automotive uses include body-control modules, motor and relay control, sensor-interface controllers, gateway nodes, and centralized body electronics. Its dual-core architecture can support partitioned real-time workloads when the firmware architecture is designed around the available cores and peripherals. The 256 KB Flash capacity is suitable for moderate embedded applications rather than large graphical user interfaces or highly data-intensive edge-computing systems.
A key design consideration is to verify the complete pin multiplexing, power-supply requirements, clock configuration, reset behavior, and peripheral availability in the manufacturer datasheet. PCB layout should provide controlled power and ground distribution, decoupling close to the device, and adequate routing clearance for the 0.5 mm-pitch-class LQFP package. Firmware qualification should include boundary tests for temperature, supply voltage, communication interfaces, and safety diagnostics relevant to the intended automotive or industrial system.
This page combines verified distributor specifications, manufacturer product information, package data, application guidance, and cross-reference validation resources. It is intended to support engineering selection and sourcing while clearly separating verified values from parameters that still require manufacturer documentation.
Drop-in alternatives for SPC5602BF2CLL4 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with SPC5602BF2CLL4 (same form factor and footprint) — differing in Package.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
SPC5602BK0CLQ4
✅ Drop-In📋 Reference alternative (not in catalog)
SPC5606BF1VLU6R
✅ Drop-In✓ In Stock
$11.1 / Unit
View Datasheet →SPC5602BF2CLL4 Maximum Ratings & Electrical Characteristics
| Product Type | 32-bit microcontroller |
| Architecture | Dual-core |
| Processor Core | Power Architecture e200z0h |
| Maximum Operating Frequency | 48 MHz |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 bits |
| Word Width | 32 bits |
| Application Classification | Automotive Grade |
| Operating Temperature | -40 °C to +85 °C |
| Package | 100-LQFP |
| Package Dimensions | 14 mm x 14 mm |
| Terminal Count | 100 terminals |
| Terminal Form | Gull wing |
| Mounting Type | Surface mount |
| Security Feature | Enhanced security for automotive applications |
| Memory Type | Flash |
| Supplier Classification | Embedded - Microcontrollers |
| Lifecycle Status | Active |
SPC5602BF2CLL4 14 mm x 14 mm Pin Configuration Guide
Pin configuration for SPC5602BF2CLL4 (14 mm x 14 mm package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for SPC5602BF2CLL4.
Refer to the datasheet for full pin configuration.
Typical Applications
SPC5602BF2CLL4 is suitable for 6 applications: Automotive Body-Control Module, Automotive Sensor-Interface Controller, Vehicle Gateway and Communication Node, Industrial Motor and Relay Controller, Actuator and Relay Interface Module, Embedded Diagnostic Controller.
Automotive Body-Control Module
SPC5602BF2CLL4 fits a body-control module that coordinates switches, lamps, locks, relays, and diagnostic inputs. Its verified 32-bit Power Architecture core, dual-core architecture, 48 MHz operation, and automotive-grade positioning provide a suitable control platform for real-time embedded tasks. The 100-LQFP package provides a defined high-pin-count integration footprint, while 256 KB Flash is relevant for moderate firmware and configuration storage. Final use should confirm power, CAN or other communication interfaces, diagnostic channels, and safety requirements in the NXP datasheet.
Recommended
Automotive Sensor-Interface Controller
Use the SPC5602BF2CLL4 as a controller for distributed automotive sensors when the system needs deterministic embedded processing and diagnostic handling. The verified 48 MHz maximum frequency and dual-core architecture can support partitioned sensing, filtering, and communication tasks, while the -40 °C to +85 °C specification is suitable for many vehicle environments. The exact ADC, timer, communication, and sensor interfaces are not present in the supplied snippets and must be verified before selecting the MCU for a specific sensor architecture.
Recommended
Vehicle Gateway and Communication Node
SPC5602BF2CLL4 can be evaluated for a vehicle communication gateway when a high-pin-count MCU, dual-core architecture, and automotive-oriented security positioning are valuable. The 100-LQFP package can support dense mixed-signal and communication routing on a multilayer PCB, while 256 KB Flash provides room for gateway firmware, diagnostics, and configuration data. Network transceiver selection, bus protection, wake-up behavior, and exact peripheral availability must be verified from the manufacturer documentation rather than inferred from the product summaries.
Recommended
Industrial Motor and Relay Controller
The SPC5602BF2CLL4 is a candidate for industrial motor, relay, and sequencing controller applications because its verified 48 MHz 32-bit processing and dual-core architecture can organize control and supervisory functions. The -40 °C to +85 °C operating range supports industrial environments beyond typical consumer conditions, and the 100-LQFP package offers many external signal connections. Before design-in, verify timer resolution, PWM resources, analog functions, communication peripherals, and electrical limits in the official datasheet.
Recommended
Actuator and Relay Interface Module
SPC5602BF2CLL4 can support an actuator interface module that converts sensed conditions into controlled outputs for pumps, valves, locks, or relays. Its dual-core architecture may help separate deterministic output management from supervisory or diagnostic logic, provided the firmware and memory map are designed accordingly. The 100-LQFP footprint allows integration with multiple external drivers and interface components, but the exact GPIO count, pin multiplexing, voltage domains, and timing characteristics are not supplied and must be confirmed before schematic release.
Recommended
Embedded Diagnostic Controller
The SPC5602BF2CLL4 is relevant to diagnostic controller designs that combine embedded software with vehicle or industrial status reporting. Its 32-bit Power Architecture core, 48 MHz operation, 256 KB Flash, and automotive-grade classification provide a suitable baseline for diagnostics, fault logging, and communication management. The enhanced-security claim in the NXP product result should be evaluated against the specific security implementation, boot and debug protections, cryptographic requirements, and update architecture documented for the exact variant.
Recommended
Recommended Products Summary
Engineering reference data for SPC5602BF2CLL4 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | SPC5602BK0CLQ4 | SPC5606BF1VLU6R |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
Key Differentiators
- Verified dual-core positioning (vs SPC5602BK0CLQ4)
- Verified 48 MHz operating class (vs SPC5606BF1VLU6R)
- Automotive-focused security positioning (vs SPC5602BK0CLQ4)
Design Notes
Design the PCB footprint and land pattern from the official NXP package drawing rather than the generic distributor description. The verified package is a 100-LQFP with gull-wing leads, but pin pitch, exposed-pad details, solder-mask clearance, and recommended land geometry are not supplied. Confirm pin numbering, lead width, courtyard, paste pattern, and assembly tolerances before releasing the PCB layout.
Use the manufacturer power-supply and decoupling recommendations before placing the MCU. The verified data does not state the complete supply voltage range, current consumption, internal regulator behavior, or pin-specific power requirements. Place required bypass capacitors close to their associated power pins, provide a clean return path, and verify startup, brownout, reset, and power-sequencing behavior with the final schematic.
Treat clock, reset, debug, and high-speed communication routes as controlled signals. The supplied data confirms a 48 MHz maximum operating frequency but does not identify all high-speed interfaces or timing margins. Use short return paths, continuous reference planes where appropriate, controlled impedance for external links, and deliberate separation between sensitive analog or communication routes and switching-power nodes.
Validate junction temperature and board temperature at the maximum ambient temperature of +85 °C and at the highest expected automotive or industrial switching workload. The verified data gives no thermal resistance, power consumption, or maximum junction-temperature value, so any thermal calculation is premature. Use the exact NXP electrical data and the final PCB stack-up, copper area, enclosure airflow, and power-loss estimate during qualification.
Do not design from search snippets alone. The verified sources conflict on the Flash value, reporting 256 KB in distributor results and 192 KB in one NXP snippet. Confirm memory size, pin assignments, peripheral availability, security features, and automotive qualification using the exact manufacturer datasheet and quality documentation for the ordered MPN before committing PCB or firmware changes.
Compliance Information
The supplied search results identify the device as automotive grade but do not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. These fields must be confirmed from current NXP documentation and supply-chain declarations.
