STM32F031G4U7 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics
部品番号: STM32F031G4U7 ✓ 生産中STM32F031G4U7 概要
A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and input/output interfaces on one integrated circuit. Its ARM Cortex-M0 architecture executes instructions using a reduced instruction set intended for embedded control. Within the product hierarchy, this STM32F0 device belongs to the STM32 family of 32-bit embedded microcontrollers and provides a practical bridge between simple discrete logic and more complex application processors.
Key features include a maximum 48 MHz operating frequency, 16 KB of Flash memory, a 28-pin UFQFPN package, and an operating supply identified as 2.5 V or 3.3 V in the product listing. The STM32F03 family also provides nine timers, an analog-to-digital converter, and communication resources. These functions support periodic measurement, motor or actuator control, signal acquisition, and serial communications without requiring multiple discrete components.
The STM32F031G4U7 combines a 32-bit ARM Cortex-M0 processing core with on-chip Flash and mixed-signal peripherals. A 4 x 4 mm UFQFPN package supports compact PCB layouts, but its 28 fine-pitch leads and exposed thermal pad require careful land-pattern, solder-paste, and assembly design. The 16 KB Flash capacity is appropriate for compact control firmware, bootloader code, and moderate protocol stacks rather than graphics-intensive or large data-logging applications.
Typical applications include industrial sensor nodes, compact medical monitoring instruments, smart-home controls, portable measurement equipment, communication modules, and small motor-control boards. The combination of timers, ADC capability, communication peripherals, and a 48 MHz core allows designers to consolidate basic control and sensing functions into one embedded platform while retaining a small footprint.
Designers should verify the complete pin assignment, exposed-pad connection, decoupling requirements, clock configuration, and programming interface against the manufacturer datasheet before PCB release. Firmware development should also confirm the required development tool, debugger, bootloader support, and peripheral mapping for the selected STM32F03 device.
This product page organizes the manufacturer specifications, sourcing information, qualified alternatives, and practical design guidance for engineers evaluating the STM32F031G4U7 in compact embedded systems.
ドロップイン代替品: STM32F031G4U7 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32F031G4U7 (同一形状・フットプリント) — 相違点: Maximum CPU Frequency, Package, Product Type.
STM32G031G4U6
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →APM32F031G4U7
✅ ドロップイン📋 参考代替品(カタログ未掲載)
CH32F031C8T6
✅ ドロップイン📋 参考代替品(カタログ未掲載)
STM32F031G4U7 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 16 KB |
| Program Memory Organization | 16K x 8 |
| Operating Supply | 2.5 V or 3.3 V |
| パッケージ | 28-pin UFQFPN |
| Package Dimensions | 4 x 4 mm |
| Core Architecture | ARM Cortex-M0 |
| Instruction Width | 32 bit |
| Timer Count | 9 timers |
| Analog-to-Digital Converter | Present |
| Communication Peripherals | Present |
| 実装タイプ | Surface mount |
STM32F031G4U7 4 x 4 mm ピン配置ガイド
STM32F031G4U7 (4 x 4 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32F031G4U7.
詳細は データシート をご参照ください。
主な用途
STM32F031G4U7 の用途: 6 件s: Industrial Sensor Nodes, Compact Medical Monitoring, Smart Home Control Modules, Portable Measurement Equipment, Small Motor and Actuator Control, Communication Interface Modules.
Industrial Sensor Nodes
The STM32F031G4U7 fits compact industrial sensor nodes that must acquire analog measurements and process them at up to 48 MHz. Its nine timers support periodic sampling, input capture, motor timing, or PWM generation, while the integrated ADC supports direct connection to sensor outputs. The 16 KB Flash stores control logic and parameter-processing routines without requiring an external memory device. Its 28-pin UFQFPN package measures 4 x 4 mm, helping reduce board area in distributed sensing equipment. Design the analog input path for the ADC’s acquisition requirements and use the manufacturer datasheet to confirm sample timing, pin assignments, and grounding.
おすすめ
Compact Medical Monitoring
The STM32F031G4U7 can serve as the control MCU in a compact medical-monitoring instrument when the design requires local acquisition, timing, and interface management. The 48 MHz ARM Cortex-M0 core provides sufficient throughput for coordinating sensor readings, applying filtering, and controlling indicators, while the ADC supports analog measurement channels. Its 16 KB Flash is suitable for focused firmware rather than extensive clinical data storage, and external storage or communications can handle larger data volumes. The 4 x 4 mm UFQFPN package also supports portable instruments. Medical suitability still depends on the complete system design, risk controls, and the manufacturer’s current qualification documentation.
おすすめ
Smart Home Control Modules
The STM32F031G4U7 is appropriate for compact smart-home control modules that coordinate switches, sensors, indicators, or actuator commands. Its timers provide predictable timing for debouncing, pulse generation, and periodic communication, while the 48 MHz core can run protocol handling and local control logic. The 16 KB Flash is sufficient for focused embedded applications, and the 28-pin UFQFPN package preserves PCB area in small enclosures. Serial interface components can extend connectivity to external transceivers. Before schematic release, verify the selected communication pins, oscillator requirements, decoupling, boot configuration, and exposed-pad layout against the manufacturer documentation.
おすすめ
Portable Measurement Equipment
The STM32F031G4U7 supports portable measurement equipment that combines sensor conditioning, digital processing, and a local display or communications interface. At up to 48 MHz, the Cortex-M0 core can execute acquisition control and calculations while the ADC handles analog inputs. Its 16 KB Flash is appropriate for compact instrument firmware, and the 4 x 4 mm UFQFPN package allows a small controller footprint. For battery-powered designs, the operating supply, active current, sleep behavior, and analog accuracy should be evaluated from the manufacturer documentation. A low-power design must also account for sensor standby current, regulator efficiency, and wake-up timing rather than focusing only on the MCU.
おすすめ
Small Motor and Actuator Control
The STM32F031G4U7 can control small motors, solenoids, relays, or other actuators in compact embedded equipment. Its nine timers support PWM generation, input capture, and periodic control functions, and the 48 MHz CPU can coordinate position or timing logic. The 16 KB Flash stores compact control algorithms, while the 28-pin UFQFPN package helps constrain board size. The MCU does not directly supply motor power, so external transistor or driver circuitry must handle current and voltage requirements. Validate timer channels against the package pinout, provide appropriate gate or base drive, and use protection appropriate to the load. Thermal and inductive transient design belongs in the power stage rather than the controller itself.
おすすめ
Communication Interface Modules
The STM32F031G4U7 is useful in communication interface modules where a local protocol controller, timing function, and status handling can share one MCU. Its communication peripherals and 48 MHz Cortex-M0 performance support embedded protocol tasks, while the 16 KB Flash is suitable for compact communication firmware and configuration handling. The small 4 x 4 mm UFQFPN package allows the controller to sit close to a connector or transceiver. Choose the appropriate external interface component according to the required physical layer, then verify signal levels, isolation, termination, and timing. A new design should confirm the STM32F031G4U7 alternate-function mapping and peripheral clock configuration directly from the manufacturer datasheet.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32F031G4U7 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32G031G4U6 | APM32F031G4U7 | CH32F031C8T6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | Geehy | WCH |
| Package | 28-pin UFQFPN | 28-pin UFQFPN | 28-pin UFQFPN | 28-pin UFQFPN |
| Core | ARM Cortex-M0 | ARM Cortex-M0+ | ARM Cortex-M0 | ARM Cortex-M0 |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 16 KB | 16 KB | 16 KB | 64 KB |
| Operating Supply | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V | 2.5 V or 3.3 V |
| Timer Count | 9 timers | 9 timers | 9 timers | 9 timers |
| Analog-to-Digital Converter | Present | Present | Present | Present |
| Communication Peripherals | Present | Present | Present | Present |
主な差別化要因
- Compact 4 x 4 mm package with 28-pin UFQFPN footprint (vs CH32F031C8T6)
- Established STM32F0 Cortex-M0 platform (vs STM32G031G4U6)
- Memory footprint aligned with focused embedded firmware (vs CH32F031C8T6)
設計ノート
Design the 28-pin UFQFPN land pattern directly from the manufacturer package drawing and confirm the exposed-pad connection, thermal-via pattern, mask openings, and paste volume. The 4 x 4 mm body leaves little assembly tolerance for lead misalignment, so use the manufacturer’s footprint rather than a visually scaled generic QFN pattern. Verify pin 1 orientation, courtyard clearance, and solderability requirements with the PCB assembly house.
Route the MCU supply and ground connections according to the manufacturer’s decoupling recommendations, keeping the input and ground-loop paths short and placing the required ceramic capacitors close to their associated pins. The device is listed for 2.5 V or 3.3 V operation, but the exact operating limits, internal-regulator configuration, and startup behavior must be confirmed in the datasheet. Keep analog and digital return-current planning aligned with the ADC usage.
Do not assume that a related STM32 family member is a pin-for-pin substitute merely because both use a 28-pin UFQFPN package. Review alternate-function mapping, oscillator pins, reset behavior, debug interfaces, ADC channels, timer channels, and boot configuration for every candidate. For a mixed-manufacturer replacement, also recompile and retest the firmware because startup code, peripheral registers, interrupts, and low-power behavior may differ.
Place analog inputs away from high-speed switching nodes and maintain a continuous ground reference beneath the device where practical. If the ADC is used, route its input traces as short as possible, isolate them from digital return paths, and observe the manufacturer’s acquisition and source-impedance requirements. Keep programming and debug access accessible so the assembled board can be programmed, diagnosed, and updated without mechanical redesign.
コンプライアンス情報
No exact-MPN environmental or automotive qualification statement appears in the available manufacturer and distributor results. Confirm current RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 documentation for STM32F031G4U7 with STMicroelectronics before qualification.