STMicroelectronics

STM32F031G4U7 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics

MPN: STM32F031G4U7 ✓ 啟用中
2.5 V or 3.3 V Vdss 28-pin UFQFPN Package 48 MHz Speed 16 KB Memory
MOQ: 1 |

STM32F031G4U7 概覽

STMicroelectronics STM32F031G4U7 is an ARM Cortex-M0 32-bit microcontroller operating at up to 48 MHz, with 16 KB of Flash memory in a 28-pin UFQFPN package measuring 4 x 4 mm. The device belongs to the STM32F0 access-line family and combines a compact footprint with embedded control and analog-processing resources.

A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and input/output interfaces on one integrated circuit. Its ARM Cortex-M0 architecture executes instructions using a reduced instruction set intended for embedded control. Within the product hierarchy, this STM32F0 device belongs to the STM32 family of 32-bit embedded microcontrollers and provides a practical bridge between simple discrete logic and more complex application processors.

Key features include a maximum 48 MHz operating frequency, 16 KB of Flash memory, a 28-pin UFQFPN package, and an operating supply identified as 2.5 V or 3.3 V in the product listing. The STM32F03 family also provides nine timers, an analog-to-digital converter, and communication resources. These functions support periodic measurement, motor or actuator control, signal acquisition, and serial communications without requiring multiple discrete components.

The STM32F031G4U7 combines a 32-bit ARM Cortex-M0 processing core with on-chip Flash and mixed-signal peripherals. A 4 x 4 mm UFQFPN package supports compact PCB layouts, but its 28 fine-pitch leads and exposed thermal pad require careful land-pattern, solder-paste, and assembly design. The 16 KB Flash capacity is appropriate for compact control firmware, bootloader code, and moderate protocol stacks rather than graphics-intensive or large data-logging applications.

Typical applications include industrial sensor nodes, compact medical monitoring instruments, smart-home controls, portable measurement equipment, communication modules, and small motor-control boards. The combination of timers, ADC capability, communication peripherals, and a 48 MHz core allows designers to consolidate basic control and sensing functions into one embedded platform while retaining a small footprint.

Designers should verify the complete pin assignment, exposed-pad connection, decoupling requirements, clock configuration, and programming interface against the manufacturer datasheet before PCB release. Firmware development should also confirm the required development tool, debugger, bootloader support, and peripheral mapping for the selected STM32F03 device.

This product page organizes the manufacturer specifications, sourcing information, qualified alternatives, and practical design guidance for engineers evaluating the STM32F031G4U7 in compact embedded systems.

直接替換替代品,適用於 STM32F031G4U7 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: STM32F031G4U7 (相同外形與佔位) — 差異在於 Maximum CPU Frequency, Package, Product Type.

STMicroelectronics
Maximum CPU Frequency: 64 MHz
Package: 28-pin UFQFPN, 4 x 4 mm
Product Type: 32-bit ARM Cortex-M0+ microcontroller
比較對象 STM32F031G4U7 →

STM32G031G4U6

✅ 直接替換 ⚠️ 規格未經驗證
STMicroelectronics
📦 28-pin UFQFPN
32-bit ARM Cortex-M0+ microcontroller · 64 MHz · 16 KB · 8 KB · 32-bit RISC · Arm Cortex-M0+ · 1.7 V to 3.6 V · 2

聯絡詢價

查看資料表 →

APM32F031G4U7

✅ 直接替換
📦 28-pin UFQFPN
Cortex-M0 and 48 MHz class are retained, while Flash is 16 KB versus 16 KB; peripheral mapping and firmware compatibility require validation

📋 參考替代品(不在目錄中)

CH32F031C8T6

✅ 直接替換
📦 28-pin UFQFPN
Cortex-M0 operation and approximately 48 MHz performance are retained, while the Flash capacity is 64 KB versus 16 KB, a 300% increase

📋 參考替代品(不在目錄中)

STM32F031G4U7 最大額定值與電氣特性

Product Type 32-bit ARM Cortex-M0 microcontroller
Maximum CPU Frequency 48 MHz
Flash Memory 16 KB
Program Memory Organization 16K x 8
Operating Supply 2.5 V or 3.3 V
封裝 28-pin UFQFPN
Package Dimensions 4 x 4 mm
Core Architecture ARM Cortex-M0
Instruction Width 32 bit
Timer Count 9 timers
Analog-to-Digital Converter Present
Communication Peripherals Present
安裝類型 Surface mount

STM32F031G4U7 4 x 4 mm 腳位配置指南

STM32F031G4U7(4 x 4 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

STM32F031G4U7 的 4 x 4 mm 封裝腳位圖

無詳細腳位定義資料: STM32F031G4U7.

請參閱 資料表 以查看完整腳位配置。

典型應用

STM32F031G4U7 適用於 6 應用s: Industrial Sensor Nodes, Compact Medical Monitoring, Smart Home Control Modules, Portable Measurement Equipment, Small Motor and Actuator Control, Communication Interface Modules.

🏭

Industrial Sensor Nodes

The STM32F031G4U7 fits compact industrial sensor nodes that must acquire analog measurements and process them at up to 48 MHz. Its nine timers support periodic sampling, input capture, motor timing, or PWM generation, while the integrated ADC supports direct connection to sensor outputs. The 16 KB Flash stores control logic and parameter-processing routines without requiring an external memory device. Its 28-pin UFQFPN package measures 4 x 4 mm, helping reduce board area in distributed sensing equipment. Design the analog input path for the ADC’s acquisition requirements and use the manufacturer datasheet to confirm sample timing, pin assignments, and grounding.

💊

Compact Medical Monitoring

The STM32F031G4U7 can serve as the control MCU in a compact medical-monitoring instrument when the design requires local acquisition, timing, and interface management. The 48 MHz ARM Cortex-M0 core provides sufficient throughput for coordinating sensor readings, applying filtering, and controlling indicators, while the ADC supports analog measurement channels. Its 16 KB Flash is suitable for focused firmware rather than extensive clinical data storage, and external storage or communications can handle larger data volumes. The 4 x 4 mm UFQFPN package also supports portable instruments. Medical suitability still depends on the complete system design, risk controls, and the manufacturer’s current qualification documentation.

🧩

Smart Home Control Modules

The STM32F031G4U7 is appropriate for compact smart-home control modules that coordinate switches, sensors, indicators, or actuator commands. Its timers provide predictable timing for debouncing, pulse generation, and periodic communication, while the 48 MHz core can run protocol handling and local control logic. The 16 KB Flash is sufficient for focused embedded applications, and the 28-pin UFQFPN package preserves PCB area in small enclosures. Serial interface components can extend connectivity to external transceivers. Before schematic release, verify the selected communication pins, oscillator requirements, decoupling, boot configuration, and exposed-pad layout against the manufacturer documentation.

🔧

Portable Measurement Equipment

The STM32F031G4U7 supports portable measurement equipment that combines sensor conditioning, digital processing, and a local display or communications interface. At up to 48 MHz, the Cortex-M0 core can execute acquisition control and calculations while the ADC handles analog inputs. Its 16 KB Flash is appropriate for compact instrument firmware, and the 4 x 4 mm UFQFPN package allows a small controller footprint. For battery-powered designs, the operating supply, active current, sleep behavior, and analog accuracy should be evaluated from the manufacturer documentation. A low-power design must also account for sensor standby current, regulator efficiency, and wake-up timing rather than focusing only on the MCU.

⚡

Small Motor and Actuator Control

The STM32F031G4U7 can control small motors, solenoids, relays, or other actuators in compact embedded equipment. Its nine timers support PWM generation, input capture, and periodic control functions, and the 48 MHz CPU can coordinate position or timing logic. The 16 KB Flash stores compact control algorithms, while the 28-pin UFQFPN package helps constrain board size. The MCU does not directly supply motor power, so external transistor or driver circuitry must handle current and voltage requirements. Validate timer channels against the package pinout, provide appropriate gate or base drive, and use protection appropriate to the load. Thermal and inductive transient design belongs in the power stage rather than the controller itself.

🌐

Communication Interface Modules

The STM32F031G4U7 is useful in communication interface modules where a local protocol controller, timing function, and status handling can share one MCU. Its communication peripherals and 48 MHz Cortex-M0 performance support embedded protocol tasks, while the 16 KB Flash is suitable for compact communication firmware and configuration handling. The small 4 x 4 mm UFQFPN package allows the controller to sit close to a connector or transceiver. Choose the appropriate external interface component according to the required physical layer, then verify signal levels, isolation, termination, and timing. A new design should confirm the STM32F031G4U7 alternate-function mapping and peripheral clock configuration directly from the manufacturer datasheet.

What is the STM32F031G4U7?
The STM32F031G4U7 is a 32-bit ARM Cortex-M0 microcontroller from STMicroelectronics that operates at up to 48 MHz and provides 16 KB of Flash memory. According to the manufacturer product page, the STM32F031x4/x6 family combines high-performance embedded processing with compact packages and integrated peripherals. The STM32F031G4U7 is supplied in a 28-pin UFQFPN package measuring 4 x 4 mm.
What are the key specifications of STM32F031G4U7 that engineers should know?
The STM32F031G4U7 combines a 32-bit ARM Cortex-M0 core, 48 MHz maximum operating frequency, 16 KB of Flash, nine timers, an ADC, and communication peripherals in a 28-pin UFQFPN package. The listed operating supply is 2.5 V or 3.3 V, and the package measures 4 x 4 mm. These parameters position the device as a compact embedded-control MCU for sensing, timing, communications, and actuator-control designs.
Where can I download the STM32F031G4U7 datasheet PDF?
The official STM32F031G4 product page provides the manufacturer documentation and datasheet access for the STM32F031G4U7. The distributor listings also link to the same technical documentation. Use the manufacturer datasheet when assigning pins, configuring clocks and peripherals, or determining PCB requirements because the 28-pin UFQFPN land pattern, exposed pad, and electrical limits must be implemented exactly as documented.
Where can I find the STM32F031G4U7 pinout?
The STM32F031G4U7 pinout is defined in the manufacturer datasheet and package information for the 28-pin UFQFPN package. The verified distributor listings identify the device as a 28-UFQFPN, 4 x 4 mm component. Use the manufacturer pin-description table when assigning PCB tracks, and pay particular attention to power, ground, reset, clock, programming, and exposed-pad connections before releasing a board layout.
What is the operating voltage of STM32F031G4U7?
The STM32F031G4U7 is listed for 2.5 V or 3.3 V operation. Product documentation for the STM32F031x4/x6 family identifies the supported 2.5 V and 3.3 V supply options. Confirm the detailed operating limits, internal-regulator behavior, and power-sequencing requirements in the manufacturer datasheet before selecting decoupling components or setting the PCB supply voltage.
How much Flash memory does STM32F031G4U7 have?
The STM32F031G4U7 contains 16 KB of Flash memory organized as 16K x 8. This capacity is suitable for compact control firmware, communication routines, configuration handling, and modest update requirements. It is more constrained than larger STM32 devices, so applications requiring extensive logging, complex graphics, or large protocol libraries should assess firmware size before committing to this part.
Is STM32F031G4U7 suitable for sensor and industrial control applications?
Yes, the STM32F031G4U7 is suitable for compact sensor and industrial-control designs because it combines a 48 MHz Cortex-M0 core, nine timers, an ADC, and communication peripherals. Its 28-pin UFQFPN package also supports space-conscious boards. The device is especially appropriate when a compact control MCU is needed without the memory or processing capacity of a higher-end application processor.
What can replace the STM32F031G4U7?
A true drop-in replacement must use the same 28-pin UFQFPN footprint, preserve the essential pin functions, and remain within the target part’s key parameter limits. STM32G031G4U6 is the closest same-manufacturer family candidate, although its newer Cortex-M0+ architecture requires firmware and peripheral-migration review. Confirm pin mapping, clock behavior, and tool compatibility before treating any substitute as production-equivalent.
Is STM32F031G4U7 the same as STM32G031G6U6?
No, the STM32F031G4U7 and STM32G031G6U6 are related but not identical devices. The F031G4U7 uses an ARM Cortex-M0 core with 16 KB of Flash, while the G031G6U6 belongs to the newer STM32G0 line and offers 32 KB of Flash. Their common tray format and 28-pin-class packaging do not by themselves establish exact pin compatibility, so firmware, peripherals, and PCB requirements must be reviewed.
When should I choose STM32F031G4U7 over STM32G031G4U6?
Choose the STM32F031G4U7 when an established STM32F0 design, Cortex-M0 software baseline, and 16 KB Flash footprint are priorities. Consider the STM32G031G4U6 when the newer Cortex-M0+ family’s processing improvements are useful and the associated peripheral, startup, and toolchain changes have been validated. The safer migration path is to treat the two as related designs rather than assuming an automatic pin-for-pin exchange.
STM32F031G4U7 vs STM32G031G6U6 - which is better for a compact control board?
The STM32F031G4U7 is better for maintaining an existing Cortex-M0-based STM32F0 platform because it provides 16 KB of Flash in the specified 28-pin UFQFPN configuration. The STM32G031G6U6 offers twice the listed Flash capacity and belongs to the newer STM32G0 family, which can benefit new designs. Neither is a substitute without a complete pin, clock, peripheral, and firmware review.
Where to buy STM32F031G4U7 online?
Use the Request a Quote form on this page to ask for STM32F031G4U7 availability, current lead time, and order quantity. The Request a Quote workflow provides a direct way to source the exact 28-pin UFQFPN ordering code without relying on a generic product match. Confirm the tray packaging code and any required quantity breaks when submitting the request.
What is the price of STM32F031G4U7?
Current commercial terms for the STM32F031G4U7 should be requested through the Request a Quote form on this page. The structured pricing system records the latest available figures, while a quote confirms the quantity, packaging, and supply status for the exact MPN. This avoids presenting a stale market figure as a firm quotation for your production requirement.
What is the lead time and stock status for STM32F031G4U7?
Submit the exact MPN and required quantity through the Request a Quote form on this page to obtain current lead time, stock status, minimum order quantity, and packaging confirmation. The STM32F031G4U7 is identified as an active STM32F031G4 product, but production scheduling can change with order volume and supply conditions. A current quote is the appropriate basis for procurement planning.
Is STM32F031G4U7 RoHS compliant and qualified for automotive applications?
The STM32F031G4U7 is an industrial and general-purpose STM32F0 access-line MCU; automotive qualification is not established by the device name or product-family designation. RoHS, REACH, lead-free, halogen-free, and AEC-Q100 status should therefore be confirmed for the exact ordering code with the manufacturer. Request the current compliance documentation before using this device in regulated or automotive equipment.

工程參考資料,適用於 STM32F031G4U7 — 比較、設計指引及合規資訊。

選型指南

Choose the STM32F031G4U7 for compact embedded-control designs requiring a 48 MHz ARM Cortex-M0 core, 16 KB of Flash, nine timers, an ADC, and a 4 x 4 mm UFQFPN package. It is particularly suitable when maintaining an established STM32F0 software baseline is more important than adding memory or moving to a newer core architecture. Consider STM32G031G4U6 for new Cortex-M0+ designs after checking startup code, peripheral changes, and PCB compatibility. APM32F031G4U7 may support second sourcing, but firmware and peripheral behavior must be validated rather than assumed identical. CH32F031C8T6 provides substantially more Flash, making it attractive when firmware growth is expected, although its 64 KB memory and vendor-specific behavior move it beyond an exact functional match. For every alternative, verify the complete pin mapping, clock tree, ADC channels, timers, bootloader, debug access, and package land pattern before production release.

與替代品比較

參數 本產品 STM32G031G4U6 APM32F031G4U7 CH32F031C8T6
Brand STMicroelectronics STMicroelectronics Geehy WCH
Package 28-pin UFQFPN 28-pin UFQFPN 28-pin UFQFPN 28-pin UFQFPN
Core ARM Cortex-M0 ARM Cortex-M0+ ARM Cortex-M0 ARM Cortex-M0
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 16 KB 16 KB 16 KB 64 KB
Operating Supply 2.5 V or 3.3 V 2.5 V or 3.3 V 2.5 V or 3.3 V 2.5 V or 3.3 V
Timer Count 9 timers 9 timers 9 timers 9 timers
Analog-to-Digital Converter Present Present Present Present
Communication Peripherals Present Present Present Present

主要差異化特點

  • Compact 4 x 4 mm package with 28-pin UFQFPN footprint (對比CH32F031C8T6)
  • Established STM32F0 Cortex-M0 platform (對比STM32G031G4U6)
  • Memory footprint aligned with focused embedded firmware (對比CH32F031C8T6)

設計說明

Design the 28-pin UFQFPN land pattern directly from the manufacturer package drawing and confirm the exposed-pad connection, thermal-via pattern, mask openings, and paste volume. The 4 x 4 mm body leaves little assembly tolerance for lead misalignment, so use the manufacturer’s footprint rather than a visually scaled generic QFN pattern. Verify pin 1 orientation, courtyard clearance, and solderability requirements with the PCB assembly house.

Route the MCU supply and ground connections according to the manufacturer’s decoupling recommendations, keeping the input and ground-loop paths short and placing the required ceramic capacitors close to their associated pins. The device is listed for 2.5 V or 3.3 V operation, but the exact operating limits, internal-regulator configuration, and startup behavior must be confirmed in the datasheet. Keep analog and digital return-current planning aligned with the ADC usage.

Do not assume that a related STM32 family member is a pin-for-pin substitute merely because both use a 28-pin UFQFPN package. Review alternate-function mapping, oscillator pins, reset behavior, debug interfaces, ADC channels, timer channels, and boot configuration for every candidate. For a mixed-manufacturer replacement, also recompile and retest the firmware because startup code, peripheral registers, interrupts, and low-power behavior may differ.

Place analog inputs away from high-speed switching nodes and maintain a continuous ground reference beneath the device where practical. If the ADC is used, route its input traces as short as possible, isolate them from digital return paths, and observe the manufacturer’s acquisition and source-impedance requirements. Keep programming and debug access accessible so the assembled board can be programmed, diagnosed, and updated without mechanical redesign.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No exact-MPN environmental or automotive qualification statement appears in the available manufacturer and distributor results. Confirm current RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 documentation for STM32F031G4U7 with STMicroelectronics before qualification.

相關搜尋

STM32F031G4U7 STM32F031G4U7 datasheet STM32F031G4U7 datasheet pdf STM32F031G4U7 pinout STM32F031G4U7 specifications STM32F031G4U7 equivalent STM32F031G4U7 replacement STM32F031G4U7 cross reference STM32F031G4U7 vs STM32G031G4U6 STM32F031G4U7 price STM32F031G4U7 stock STMicroelectronics STM32F031G4U7 STM32F031G4U7 28 UFQFPN STM32F031G4U7 application circuit

相關元件與詞彙

STMicroelectronics STM32F031G4U7 STM32F031G4 STM32G031G4U6 APM32F031G4U7 CH32F031C8T6 ARM Cortex-M0 ARM Cortex-M0+ 32-bit microcontroller embedded microcontroller STM32F0 STM32G0 16 KB Flash 48 MHz 28-pin UFQFPN UFQFPN package QFN package family surface mount SMD ADC communication peripherals industrial sensor control medical monitoring smart-home control RoHS REACH AEC-Q100
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情