STM32F215ZGT6 - 120MHz Cortex-M3 MCU | STMicroelectronics
部品番号: STM32F215ZGT6 ✓ 生産中STM32F215ZGT6 概要
An MCU is a programmable system-on-chip used to execute embedded control software, coordinate peripherals, and exchange data with sensors, communications circuits, and actuators. In the product hierarchy, the STM32F215ZGT6 is an ARM Cortex-M3 microcontroller, an embedded processor within the broader semiconductor and microcontrollers category. Its 120 MHz operating frequency supports responsive real-time control, while 1 MB of Flash provides room for application code and firmware.
The STM32F215ZG device family is built around the high-performance ARM Cortex-M3 32-bit RISC core. According to the STMicroelectronics product page, the STM32F21x family operates at frequencies up to 120 MHz. The exact STM32F215ZGT6 order code combines that processor with 1 MB of Flash and a 144-pin LQFP package, as identified by the manufacturer and distributor product listings.
The 144-LQFP package exposes a high pin count for a microcontroller, supporting a broad selection of general-purpose and dedicated I/O functions. Its 20 x 20 mm body is larger than small QFN packages but offers a practical option for designs requiring numerous external connections. The 2.5 V and 3.3 V supply references shown in the product listing are important for selecting compatible regulators, level shifters, and external circuitry.
Typical uses include industrial automation, communications equipment, motor and motion control, test and measurement instruments, and connected embedded systems. The combination of 120 MHz processing and 1 MB Flash is particularly useful where an application requires substantial local firmware alongside multiple peripheral functions and deterministic control loops.
When designing a board around the STM32F215ZGT6, follow the manufacturer pin-description table and package drawing for every signal assignment. In particular, verify power, ground, reset, clock, boot, and debug connections directly against the manufacturer documentation before routing the PCB, and preserve the recommended decoupling and external-component arrangements.
This product page combines manufacturer family information, exact order-code characteristics, sourcing guidance, and engineering-focused selection notes. It also organizes same-package alternatives and application considerations so designers can evaluate firmware, peripheral, package, and supply-chain requirements before committing to a PCB layout.
ドロップイン代替品: STM32F215ZGT6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32F215ZGT6 (同一形状・フットプリント) — 相違点: Package, Core, Number of I/O Pins, Program Memory, Program Memory Organization.
STM32F205ZGT6
✅ ドロップイン価格はお問い合わせください
データシートを見る →STM32F215ZGT6VXXX
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
STM32F215ZGT6 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 120 MHz |
| CPU Architecture | ARM Cortex-M3 32-bit RISC |
| Flash Memory | 1 MB (1M x 8) |
| Program Memory Type | Flash |
| パッケージ | 144-LQFP (20 x 20 mm) |
| 実装タイプ | Surface Mount |
| 電源電圧 | 2.5 V and 3.3 V |
STM32F215ZGT6 144-lqfp (20 x 20 mm) ピン配置ガイド
STM32F215ZGT6 (144-lqfp (20 x 20 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32F215ZGT6.
詳細は データシート をご参照ください。
主な用途
STM32F215ZGT6 の用途: 6 件s: Industrial Automation Controllers, Communications Equipment, Motor and Motion Control, Test and Measurement Instruments, Embedded Gateways and IoT Equipment, Consumer and Professional Equipment.
Industrial Automation Controllers
The STM32F215ZGT6 fits industrial automation controllers that combine real-time control with a substantial firmware footprint. Its 120 MHz ARM Cortex-M3 core can execute control loops, communication stacks, and supervisory logic, while 1 MB of Flash provides room for application code and updateable control routines. The 144-LQFP package exposes a large number of connections for digital I/O, communications, and external interfaces. Before finalizing a controller design, verify the required peripheral functions, operating-temperature range, isolation strategy, and regulator headroom against the manufacturer documentation.
おすすめ
Communications Equipment
The STM32F215ZGT6 is appropriate for communications equipment requiring a fast embedded processor and ample local program memory. The 120 MHz Cortex-M3 core can manage protocol processing, control traffic, and monitor system status, while the 1 MB Flash capacity accommodates firmware, protocol tables, and configuration data. Its 144-LQFP package provides extensive signal access for transceivers, status indicators, and data interfaces. Exact Ethernet, USB, and other interface capabilities must be confirmed for this order code before assigning connector-facing circuitry or defining the clock and power architecture.
おすすめ
Motor and Motion Control
The STM32F215ZGT6 can serve as the central controller in motor and motion-control systems where computation must coexist with numerous discrete control connections. A 120 MHz Cortex-M3 core provides processing capacity for motion algorithms, sequencing, fault handling, and communications, while 1 MB Flash supports control firmware and parameter tables. The 144-LQFP package is useful for pulse inputs, encoder interfaces, control outputs, and debug access. Validate timer features, encoder support, ADC performance, and timing guarantees against the manufacturer datasheet before selecting external drivers or safety margins.
おすすめ
Test and Measurement Instruments
The STM32F215ZGT6 is a logical candidate for test and measurement instruments that require local signal control, instrument-state management, and substantial firmware. Its 120 MHz processor can coordinate acquisition sequences, calibration logic, user-interface tasks, and data transfer, while 1 MB Flash supports embedded programs and configuration data. The 144-LQFP package offers enough external connections for measurement inputs, trigger signals, communications, and displays. Confirm analog-input characteristics, timer resolution, interface availability, and precision requirements in the manufacturer documentation before committing to a front-end design.
おすすめ
Embedded Gateways and IoT Equipment
The STM32F215ZGT6 can support embedded gateways and connected IoT equipment that must process data locally rather than rely entirely on a host processor. The 120 MHz Cortex-M3 core handles protocol conversion, local control, and data buffering, while the 1 MB Flash capacity accommodates networking stacks, device logic, and secure update support. Its high-pin-count LQFP package provides flexible access to sensors, status LEDs, network interfaces, and service pins. Exact connectivity, security features, memory requirements, and low-power modes must be checked for the selected order code before board design begins.
おすすめ
Consumer and Professional Equipment
The STM32F215ZGT6 can be evaluated for professional equipment, appliances, and control products where a high-performance MCU must manage both user controls and embedded automation. The 120 MHz Cortex-M3 core supports responsive state-machine and communications handling, and 1 MB Flash provides room for application firmware beyond a small basic-controller program. The 144-LQFP package offers a broad selection of external I/O for displays, sensors, relays, and interface circuits. Check operating-temperature limits, EMC-sensitive pin assignments, watchdog behavior, and the exact power requirements to determine whether this package and performance level are appropriate.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32F215ZGT6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32F205ZGT6 | STM32F215ZGT6VXXX |
|---|---|---|---|
| Package | 144-LQFP (20 x 20 mm) | 144-LQFP (20 x 20 mm) | 144-LQFP (20 x 20 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | ARM Cortex-M3 32-bit RISC | ARM Cortex-M3 32-bit RISC | ARM Cortex-M3 32-bit RISC |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB |
| Order-Code Qualification | STM32F215ZGT6 | STM32F205 family designation | STM32F215 family with VXXX suffix |
主な差別化要因
- High processing rate with substantial embedded Flash (vs STM32F205ZGT6)
- Direct base-family selection with 144-LQFP footprint (vs STM32F205ZGT6)
- Family qualification suffix flexibility (vs STM32F205ZGT6)
設計ノート
Confirm the exact core and I/O supply ranges, absolute maximum ratings, and regulator requirements in the manufacturer datasheet before laying out the power tree. The STM32F215ZGT6 product listing identifies 2.5 V and 3.3 V supply references, but those references alone do not establish every rail tolerance. Place the required bypass capacitors adjacent to the associated power and ground pins, use a dedicated return path for sensitive measurements, and sequence power rails when connected to external transceivers or powered peripherals.
Route the 144-LQFP package with attention to assembly access and signal integrity rather than only electrical net length. Keep clock inputs, reset, and debug interfaces away from noisy switching nodes, provide a continuous ground reference beneath signal routing where practical, and place decoupling capacitors close to their pins. Review every NC, reserved, and alternate-function pin in the manufacturer pin-description table before releasing fabrication data.
Do not treat a matching 144-LQFP footprint as proof that another MCU is a drop-in replacement. The STM32F205ZGT6 shares the principal core-frequency and Flash characteristics, but peripheral availability, interrupt behavior, startup code, clock limits, and qualification requirements still require review. For an existing design, create a migration checklist covering GPIO assignments, timers, communication peripherals, analog functions, memory-map assumptions, watchdog handling, and firmware startup.
Use the manufacturer reference clock and board-layout guidance when connecting the STM32F215ZGT6 to crystals, oscillators, or external clock sources. Keep oscillator traces short, maintain the required ground return, and avoid routing high-current or high-edge-rate signals beneath sensitive clock paths. If the design uses communication interfaces, verify edge rates, impedance expectations, return paths, and connector transitions against the relevant interface requirements.
コンプライアンス情報
The manufacturer product listing does not state the requested compliance attributes. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations for the exact order code before production release.