STM32F215ZGT6 - 120MHz Cortex-M3 MCU | STMicroelectronics
부품 번호: STM32F215ZGT6 ✓ 활성STM32F215ZGT6 개요
An MCU is a programmable system-on-chip used to execute embedded control software, coordinate peripherals, and exchange data with sensors, communications circuits, and actuators. In the product hierarchy, the STM32F215ZGT6 is an ARM Cortex-M3 microcontroller, an embedded processor within the broader semiconductor and microcontrollers category. Its 120 MHz operating frequency supports responsive real-time control, while 1 MB of Flash provides room for application code and firmware.
The STM32F215ZG device family is built around the high-performance ARM Cortex-M3 32-bit RISC core. According to the STMicroelectronics product page, the STM32F21x family operates at frequencies up to 120 MHz. The exact STM32F215ZGT6 order code combines that processor with 1 MB of Flash and a 144-pin LQFP package, as identified by the manufacturer and distributor product listings.
The 144-LQFP package exposes a high pin count for a microcontroller, supporting a broad selection of general-purpose and dedicated I/O functions. Its 20 x 20 mm body is larger than small QFN packages but offers a practical option for designs requiring numerous external connections. The 2.5 V and 3.3 V supply references shown in the product listing are important for selecting compatible regulators, level shifters, and external circuitry.
Typical uses include industrial automation, communications equipment, motor and motion control, test and measurement instruments, and connected embedded systems. The combination of 120 MHz processing and 1 MB Flash is particularly useful where an application requires substantial local firmware alongside multiple peripheral functions and deterministic control loops.
When designing a board around the STM32F215ZGT6, follow the manufacturer pin-description table and package drawing for every signal assignment. In particular, verify power, ground, reset, clock, boot, and debug connections directly against the manufacturer documentation before routing the PCB, and preserve the recommended decoupling and external-component arrangements.
This product page combines manufacturer family information, exact order-code characteristics, sourcing guidance, and engineering-focused selection notes. It also organizes same-package alternatives and application considerations so designers can evaluate firmware, peripheral, package, and supply-chain requirements before committing to a PCB layout.
드롭인 대체품: STM32F215ZGT6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: STM32F215ZGT6 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Core, Number of I/O Pins, Program Memory, Program Memory Organization.
STM32F205ZGT6
✅ 드롭인가격 문의
데이터시트 보기 →STM32F215ZGT6VXXX
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
STM32F215ZGT6 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 120 MHz |
| CPU Architecture | ARM Cortex-M3 32-bit RISC |
| Flash Memory | 1 MB (1M x 8) |
| Program Memory Type | Flash |
| 패키지 | 144-LQFP (20 x 20 mm) |
| 실장 유형 | Surface Mount |
| 공급 전압 | 2.5 V and 3.3 V |
STM32F215ZGT6 144-lqfp (20 x 20 mm) 핀 구성 가이드
STM32F215ZGT6(144-lqfp (20 x 20 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: STM32F215ZGT6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
STM32F215ZGT6 적합 용도: 6 애플리케이션s: Industrial Automation Controllers, Communications Equipment, Motor and Motion Control, Test and Measurement Instruments, Embedded Gateways and IoT Equipment, Consumer and Professional Equipment.
Industrial Automation Controllers
The STM32F215ZGT6 fits industrial automation controllers that combine real-time control with a substantial firmware footprint. Its 120 MHz ARM Cortex-M3 core can execute control loops, communication stacks, and supervisory logic, while 1 MB of Flash provides room for application code and updateable control routines. The 144-LQFP package exposes a large number of connections for digital I/O, communications, and external interfaces. Before finalizing a controller design, verify the required peripheral functions, operating-temperature range, isolation strategy, and regulator headroom against the manufacturer documentation.
추천
Communications Equipment
The STM32F215ZGT6 is appropriate for communications equipment requiring a fast embedded processor and ample local program memory. The 120 MHz Cortex-M3 core can manage protocol processing, control traffic, and monitor system status, while the 1 MB Flash capacity accommodates firmware, protocol tables, and configuration data. Its 144-LQFP package provides extensive signal access for transceivers, status indicators, and data interfaces. Exact Ethernet, USB, and other interface capabilities must be confirmed for this order code before assigning connector-facing circuitry or defining the clock and power architecture.
추천
Motor and Motion Control
The STM32F215ZGT6 can serve as the central controller in motor and motion-control systems where computation must coexist with numerous discrete control connections. A 120 MHz Cortex-M3 core provides processing capacity for motion algorithms, sequencing, fault handling, and communications, while 1 MB Flash supports control firmware and parameter tables. The 144-LQFP package is useful for pulse inputs, encoder interfaces, control outputs, and debug access. Validate timer features, encoder support, ADC performance, and timing guarantees against the manufacturer datasheet before selecting external drivers or safety margins.
추천
Test and Measurement Instruments
The STM32F215ZGT6 is a logical candidate for test and measurement instruments that require local signal control, instrument-state management, and substantial firmware. Its 120 MHz processor can coordinate acquisition sequences, calibration logic, user-interface tasks, and data transfer, while 1 MB Flash supports embedded programs and configuration data. The 144-LQFP package offers enough external connections for measurement inputs, trigger signals, communications, and displays. Confirm analog-input characteristics, timer resolution, interface availability, and precision requirements in the manufacturer documentation before committing to a front-end design.
추천
Embedded Gateways and IoT Equipment
The STM32F215ZGT6 can support embedded gateways and connected IoT equipment that must process data locally rather than rely entirely on a host processor. The 120 MHz Cortex-M3 core handles protocol conversion, local control, and data buffering, while the 1 MB Flash capacity accommodates networking stacks, device logic, and secure update support. Its high-pin-count LQFP package provides flexible access to sensors, status LEDs, network interfaces, and service pins. Exact connectivity, security features, memory requirements, and low-power modes must be checked for the selected order code before board design begins.
추천
Consumer and Professional Equipment
The STM32F215ZGT6 can be evaluated for professional equipment, appliances, and control products where a high-performance MCU must manage both user controls and embedded automation. The 120 MHz Cortex-M3 core supports responsive state-machine and communications handling, and 1 MB Flash provides room for application firmware beyond a small basic-controller program. The 144-LQFP package offers a broad selection of external I/O for displays, sensors, relays, and interface circuits. Check operating-temperature limits, EMC-sensitive pin assignments, watchdog behavior, and the exact power requirements to determine whether this package and performance level are appropriate.
추천
추천 제품 요약
엔지니어링 참조 데이터: STM32F215ZGT6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | STM32F205ZGT6 | STM32F215ZGT6VXXX |
|---|---|---|---|
| Package | 144-LQFP (20 x 20 mm) | 144-LQFP (20 x 20 mm) | 144-LQFP (20 x 20 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | ARM Cortex-M3 32-bit RISC | ARM Cortex-M3 32-bit RISC | ARM Cortex-M3 32-bit RISC |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB |
| Order-Code Qualification | STM32F215ZGT6 | STM32F205 family designation | STM32F215 family with VXXX suffix |
주요 차별점
- High processing rate with substantial embedded Flash (vs STM32F205ZGT6)
- Direct base-family selection with 144-LQFP footprint (vs STM32F205ZGT6)
- Family qualification suffix flexibility (vs STM32F205ZGT6)
설계 노트
Confirm the exact core and I/O supply ranges, absolute maximum ratings, and regulator requirements in the manufacturer datasheet before laying out the power tree. The STM32F215ZGT6 product listing identifies 2.5 V and 3.3 V supply references, but those references alone do not establish every rail tolerance. Place the required bypass capacitors adjacent to the associated power and ground pins, use a dedicated return path for sensitive measurements, and sequence power rails when connected to external transceivers or powered peripherals.
Route the 144-LQFP package with attention to assembly access and signal integrity rather than only electrical net length. Keep clock inputs, reset, and debug interfaces away from noisy switching nodes, provide a continuous ground reference beneath signal routing where practical, and place decoupling capacitors close to their pins. Review every NC, reserved, and alternate-function pin in the manufacturer pin-description table before releasing fabrication data.
Do not treat a matching 144-LQFP footprint as proof that another MCU is a drop-in replacement. The STM32F205ZGT6 shares the principal core-frequency and Flash characteristics, but peripheral availability, interrupt behavior, startup code, clock limits, and qualification requirements still require review. For an existing design, create a migration checklist covering GPIO assignments, timers, communication peripherals, analog functions, memory-map assumptions, watchdog handling, and firmware startup.
Use the manufacturer reference clock and board-layout guidance when connecting the STM32F215ZGT6 to crystals, oscillators, or external clock sources. Keep oscillator traces short, maintain the required ground return, and avoid routing high-current or high-edge-rate signals beneath sensitive clock paths. If the design uses communication interfaces, verify edge rates, impedance expectations, return paths, and connector transitions against the relevant interface requirements.
규정 준수 정보
The manufacturer product listing does not state the requested compliance attributes. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations for the exact order code before production release.