STM32F302CBT6 - 32-Bit ARM Cortex-M4 MCU 72MHz 128KB Flash | STMicroelectronics
部品番号: STM32F302CBT6 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $4.85 | $4.85 |
| 10 | $4.36 | $43.60 |
| 100 | $3.88 | $388.00 |
| 500 | $3.49 | $1,745.00 |
| 1,000 | $3.1 | $3,100.00 |
STM32F302CBT6 概要
A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The STM32F302CBT6 belongs to the STM32F3 series, which is optimized for mixed-signal processing, combining an ARM Cortex-M4 core with advanced analog peripherals such as high-speed ADCs, operational amplifiers, and comparators. This positions it within the broader hierarchy of embedded processors, from general-purpose MCUs to application-specific system-on-chips.
Key features include a 12-bit ADC with 5 MSPS sampling rate, programmable gain amplifiers (PGAs), and analog comparators, enabling precise analog signal conditioning without external components. The device also includes a memory protection unit (MPU) and a CCM (Core Coupled Memory) for real-time performance. The FPU accelerates floating-point calculations, which is critical for control algorithms and digital signal processing tasks.
The STM32F302CBT6 is built on a high-performance ARM Cortex-M4 core with a 72 MHz clock, providing 90 DMIPS of processing power. The inclusion of DSP instructions and an FPU allows efficient execution of complex mathematical operations, making it ideal for motor control, power conversion, and audio processing. The device operates from a 2.0V to 3.6V supply and supports a temperature range of -40°C to +85°C.
Typical applications include motor control for industrial drives, power management in renewable energy systems, and audio processing in consumer electronics. The high-speed ADC and analog peripherals make it particularly well-suited for applications requiring real-time analog signal acquisition and processing, such as digital power supplies and smart sensors.
When designing with this device, ensure proper decoupling of the power supply pins and careful layout of the analog and digital grounds to minimize noise. The flexible clock tree allows the use of an external crystal or internal RC oscillator, providing design flexibility for cost-sensitive applications.
ドロップイン代替品: STM32F302CBT6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32F302CBT6 （同一形状・フットプリント） — 相違点: Flash Memory, SRAM.
クイック比較ツール — 並列比較する代替部品を選択:
STM32F302CCT6
✅ ドロップイン📋 参考代替品（カタログ未掲載）
STM32F302C8T6
✅ ドロップイン📋 参考代替品（カタログ未掲載）
GD32F303CBT6
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
STM32F303CBT6
✅ ドロップイン✓ 在庫あり
$4.16 / 個
データシートを見る →STM32F302CBT6 最大定格＆電気的特性
| Core | ARM Cortex-M4 with FPU |
| 最大クロック周波数 | 72 MHz |
| Flash Memory | 128 KB |
| SRAM | 32 KB |
| データバス幅 | 32-bit |
| ADC Resolution | 12-bit |
| ADC Sampling Rate | 5 MSPS |
| Number of I/O Pins | 37 |
| Supply Voltage Range | 2.0 V to 3.6 V |
| 動作温度範囲 | -40°C to +85°C |
| パッケージ | LQFP-48 (7x7 mm) |
| 実装タイプ | Surface Mount |
| DSP Instructions | Yes |
| Floating Point Unit | Yes |
| Memory Protection Unit | Yes |
| Core Coupled Memory | Yes |
| Programmable Gain Amplifiers | Yes |
| Analog Comparators | Yes |
| RoHS ステータス | Compliant |
STM32F302CBT6 ピン構成
| ピン 1 | VBAT — Battery backup supply |
| ピン 2 | PC13 — GPIO / RTC output |
| ピン 3 | PC14 — GPIO / OSC32_IN |
| ピン 4 | PC15 — GPIO / OSC32_OUT |
| ピン 5 | PF0 — GPIO / OSC_IN |
| ピン 6 | PF1 — GPIO / OSC_OUT |
| ピン 7 | NRST — Reset (active low) |
| ピン 8 | VDD — Digital power supply |
| ピン 9 | VSS — Digital ground |
| ピン 10 | PA0 — GPIO / ADC_IN0 |
| ピン 11 | PA1 — GPIO / ADC_IN1 |
| ピン 12 | PA2 — GPIO / USART2_TX |
| ピン 13 | PA3 — GPIO / USART2_RX |
| ピン 14 | PA4 — GPIO / DAC_OUT1 |
| ピン 15 | PA5 — GPIO / DAC_OUT2 |
| ピン 16 | PA6 — GPIO / SPI1_MISO |
| ピン 17 | PA7 — GPIO / SPI1_MOSI |
| ピン 18 | PB0 — GPIO / ADC_IN8 |
| ピン 19 | PB1 — GPIO / ADC_IN9 |
| ピン 20 | PB2 — GPIO / BOOT1 |
| ピン 21 | PB10 — GPIO / I2C2_SCL |
| ピン 22 | PB11 — GPIO / I2C2_SDA |
| ピン 23 | PB12 — GPIO / SPI2_NSS |
| ピン 24 | PB13 — GPIO / SPI2_SCK |
| ピン 25 | PB14 — GPIO / SPI2_MISO |
| ピン 26 | PB15 — GPIO / SPI2_MOSI |
| ピン 27 | PA8 — GPIO / MCO |
| ピン 28 | PA9 — GPIO / USART1_TX |
| ピン 29 | PA10 — GPIO / USART1_RX |
| ピン 30 | PA11 — GPIO / USB_DM |
| ピン 31 | PA12 — GPIO / USB_DP |
| ピン 32 | PA13 — GPIO / SWDIO |
| ピン 33 | PA14 — GPIO / SWCLK |
| ピン 34 | PA15 — GPIO / JTDI |
| ピン 35 | PB3 — GPIO / JTDO |
| ピン 36 | PB4 — GPIO / NJTRST |
| ピン 37 | PB5 — GPIO / I2C1_SMBA |
| ピン 38 | PB6 — GPIO / I2C1_SCL |
| ピン 39 | PB7 — GPIO / I2C1_SDA |
| ピン 40 | BOOT0 — Boot mode selection |
| ピン 41 | PB8 — GPIO / CAN_RX |
| ピン 42 | PB9 — GPIO / CAN_TX |
| ピン 43 | VDD — Digital power supply |
| ピン 44 | VSS — Digital ground |
| ピン 45 | PC14 — GPIO / OSC32_IN |
| ピン 46 | PC15 — GPIO / OSC32_OUT |
| ピン 47 | PC13 — GPIO / RTC output |
| ピン 48 | VBAT — Battery backup supply |
主な用途
STM32F302CBT6 の用途: 6 件s: Motor Control, Digital Power Conversion, Audio Processing, Industrial Automation, Medical Devices, Consumer Electronics.
Motor Control
The STM32F302CBT6 is ideal for motor control applications due to its high-speed 12-bit ADC (5 MSPS), comparators, and advanced PWM timers. The Cortex-M4 FPU accelerates field-oriented control (FOC) algorithms, enabling efficient and precise control of brushless DC (BLDC) and permanent magnet synchronous motors (PMSM). In a typical motor control system, the MCU reads phase currents and rotor position via the ADC, processes the FOC algorithm, and generates PWM signals to drive the inverter. The high-speed ADC ensures accurate current sensing, while the comparators provide overcurrent protection. The FPU reduces computation time for complex mathematical operations, allowing higher control loop frequencies and improved dynamic response. Compared to MCUs without an FPU, the STM32F302CBT6 can execute FOC algorithms with lower latency, reducing torque ripple and improving efficiency. Designers should ensure proper isolation between power and control stages and use dedicated PWM timers with dead-time insertion to prevent shoot-through.
おすすめ
Digital Power Conversion
The STM32F302CBT6 is well-suited for digital power conversion applications such as switch-mode power supplies (SMPS) and DC-DC converters. Its high-speed ADC (5 MSPS) enables precise voltage and current sensing, while the comparators and PWM timers facilitate digital control loops. The Cortex-M4 FPU accelerates complex control algorithms like PID and predictive control, improving transient response and efficiency. In a typical digital power supply, the MCU samples the output voltage and current, computes the control signal, and adjusts the PWM duty cycle to maintain regulation. The high-speed ADC ensures minimal delay in the control loop, reducing output voltage ripple. The device's analog peripherals, including PGAs, allow direct interfacing with current sense resistors without external amplifiers. Compared to analog controllers, the STM32F302CBT6 offers flexibility for implementing advanced features like digital compensation and telemetry. Designers should pay attention to the ADC sampling timing and use appropriate filtering to minimize noise in the control loop.
おすすめ
Audio Processing
The STM32F302CBT6 is suitable for audio processing applications due to its Cortex-M4 core with FPU and DSP instructions, which accelerate audio algorithms like filtering, equalization, and noise reduction. The high-speed ADC can sample audio signals at high rates, while the DAC (if available) can output processed audio. In a typical audio application, the MCU reads audio data from a microphone or line input, processes it using DSP algorithms, and outputs the result to a speaker or headphone. The FPU enables efficient implementation of floating-point filters, reducing quantization noise and improving audio quality. The device's low power consumption and small package make it suitable for portable audio devices. Compared to MCUs without an FPU, the STM32F302CBT6 can handle more complex audio processing tasks in real-time. Designers should ensure proper grounding and shielding to minimize noise in the audio signal path.
おすすめ
Industrial Automation
The STM32F302CBT6 is used in industrial automation for applications like PLCs, sensors, and actuators. Its robust design, wide operating temperature range (-40°C to +85°C), and rich peripheral set make it suitable for harsh environments. The high-speed ADC and comparators enable precise analog signal acquisition and threshold detection. The Cortex-M4 core with FPU accelerates control algorithms for robotics and motion control. In a typical industrial sensor, the MCU reads analog signals from sensors, processes them, and communicates via interfaces like UART, SPI, or I2C. The device's multiple timers and PWM outputs can drive actuators and motors. Compared to general-purpose MCUs, the STM32F302CBT6 offers better analog performance and processing power, making it ideal for advanced industrial applications. Designers should consider using external protection components like TVS diodes and optocouplers for isolation in industrial environments.
おすすめ
Medical Devices
The STM32F302CBT6 is used in medical devices such as patient monitors, infusion pumps, and diagnostic equipment. Its high-speed ADC and analog peripherals enable precise measurement of physiological signals like ECG and blood pressure. The Cortex-M4 core with FPU accelerates signal processing algorithms for filtering and analysis. In a typical patient monitor, the MCU samples ECG signals, processes them to detect abnormalities, and displays the results on a screen. The device's low power consumption is critical for battery-powered portable medical devices. Compared to MCUs without an FPU, the STM32F302CBT6 can handle more complex signal processing in real-time, improving diagnostic accuracy. Designers must ensure compliance with medical safety standards like IEC 60601 and use appropriate isolation and protection circuits.
おすすめ
Consumer Electronics
The STM32F302CBT6 is used in consumer electronics like smart home devices, wearables, and gaming peripherals. Its small package, low power consumption, and rich peripheral set make it suitable for space-constrained designs. The high-speed ADC and comparators enable touch sensing and analog signal processing. The Cortex-M4 core with FPU accelerates user interface algorithms and audio processing. In a typical smart home device, the MCU reads sensor data, processes it, and communicates via Bluetooth or Wi-Fi modules. The device's multiple timers and PWM outputs can drive LEDs and buzzers. Compared to general-purpose MCUs, the STM32F302CBT6 offers better performance and analog capabilities, making it ideal for advanced consumer products. Designers should consider using low-power modes to extend battery life in portable devices.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32F302CBT6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32F302CCT6 | STM32F302RBT6 | STM32F302C8T6 | GD32F303CBT6 | STM32F303CBT6 |
|---|---|---|---|---|---|---|
| Package | LQFP-48 (7x7 mm) | LQFP-48 (7x7 mm) - same | LQFP-64 (10x10 mm) - different | LQFP-48 (7x7 mm) - same | LQFP-48 (7x7 mm) - same | LQFP-48 (7x7 mm) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | GigaDevice | STMicroelectronics |
| Core | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU |
| Maximum Clock Frequency | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz | 72 MHz |
| Flash Memory | 128 KB | 256 KB | 128 KB | 64 KB | 128 KB | 128 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 16 KB | 32 KB | 32 KB |
| Supply Voltage Range | 2.0V to 3.6V | 2.0V to 3.6V | 2.0V to 3.6V | 2.0V to 3.6V | 2.6V to 3.6V | 2.0V to 3.6V |
主な差別化要因
- High-speed ADC with 5 MSPS sampling rate （vs STM32F103CBT6)
- Integrated programmable gain amplifiers (PGAs) （vs STM32F103CBT6)
- Floating-point unit (FPU) for faster math （vs STM32F103CBT6)
設計ノート
The STM32F302CBT6 operates from 2.0V to 3.6V. Use a 100nF decoupling capacitor on each VDD pin and a 4.7uF bulk capacitor on the main supply. For the VDDA pin, use a 1uF capacitor and a ferrite bead to isolate analog noise. Ensure the VSSA pin is connected to a clean analog ground.
For the LQFP-48 package, ensure proper solder paste stencil design to avoid bridging. Place the crystal oscillator close to the OSC_IN/OSC_OUT pins with load capacitors as specified in the datasheet. Keep the SWD interface traces short and shielded to prevent noise during debugging.
Do not leave unused pins floating; configure them as outputs or tie them to a defined level. Ensure the BOOT0 pin is properly pulled low for normal operation. When using the ADC, avoid routing digital traces near the analog input pins to minimize noise coupling.
コンプライアンス情報
RoHS compliant per STMicroelectronics product page. Not AEC-Q100 qualified - this is a standard-grade MCU.
