STM32F303RDT6 - 72MHz Cortex-M4 MCU | STMicroelectronics
部品番号: STM32F303RDT6 ✓ 生産中STM32F303RDT6 概要
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32F303 belongs to the STM32F3 mixed-signal MCU family, where the ARM Cortex-M4 core sits between general-purpose embedded control and higher-performance digital signal processing. Its floating-point unit accelerates many control, filtering, and signal-transformation operations in real time.
Three defining parameters define this controller: a 72 MHz operating frequency, 384 KB of Flash program memory, and a 64-pin LQFP 10 x 10 mm package. The 64 KB SRAM provides working memory for algorithms, communication buffers, and application tasks. The STM32F303xD/E family also provides a mixed-signal feature set intended for industrial control, instrumentation, motor-control, communications, and compact consumer equipment.
The Cortex-M4 architecture supports a broad embedded software ecosystem, including C/C++ application code, interrupt-driven control, timer-based sequencing, and communication stacks. Compared with a smaller 8- or 16-bit controller, the 32-bit architecture provides greater address space and arithmetic capacity, while the on-chip Flash and SRAM reduce external component count. At 72 MHz, the MCU can combine control-loop servicing with peripheral data processing rather than offloading every task to an external processor.
Typical uses include motor and power-conversion control, measurement front ends, data acquisition units, communication gateways, and compact industrial controllers. Designers can use the mixed-signal peripherals to sample analog inputs, operate timers, generate control signals, and manage communication tasks within a unified device. Firmware and peripheral assignments should be checked against the complete STM32F303xD/E reference documentation before a new PCB is released.
A key hardware consideration is decoupling. Place the manufacturer-recommended bulk and high-frequency capacitors close to the corresponding supply pins, preserve the package land pattern, and route sensitive analog and communication signals away from high-current switching nodes. Firmware, clock configuration, peripheral initialization, and pin multiplexing must match the exact pinout in the manufacturer datasheet.
This page consolidates the confirmed processor, memory, frequency, package, and sourcing details with practical application guidance, design notes, and engineering comparisons. It also distinguishes verified pin-compatible alternatives from merely similar controllers so engineers can evaluate footprint, memory, peripheral, and lifecycle requirements before committing to a replacement.
ドロップイン代替品: STM32F303RDT6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32F303RDT6 (同一形状・フットプリント) — 相違点: Flash Memory, Package, ADC, Comparators, DAC.
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストSTM32F303RDT6 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M4 mixed-signal microcontroller |
| Processor Core | ARM Cortex-M4 with FPU |
| Instruction Set | 32-bit RISC |
| Maximum CPU Frequency | 72 MHz |
| Flash Memory | 384 KB (384K x 8) |
| SRAM | 64 KB |
| パッケージ | 64-LQFP, 10 x 10 mm |
| ピン数 | 64 pins |
| 実装タイプ | Surface mount |
| Product Family | STM32F303xD/E |
| Core Architecture | ARM Cortex-M4 |
| Floating-Point Unit | Integrated |
| ADC Resolution | 12-bit |
STM32F303RDT6 64-lqfp, 10 x 10 mm ピン配置ガイド
STM32F303RDT6 (64-lqfp, 10 x 10 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32F303RDT6.
詳細は データシート をご参照ください。
主な用途
STM32F303RDT6 の用途: 6 件s: Industrial Motor Control, Digital Power Conversion, Industrial Data Acquisition, Communication Gateway, Precision Measurement Instrument, Embedded Automation Controller.
Industrial Motor Control
The STM32F303RDT6 fits compact motor controllers that need deterministic timing, fast arithmetic, and substantial local program memory. Its 72 MHz ARM Cortex-M4 core can service control loops, execute protection logic, and process current or position measurements, while the FPU accelerates many filtering and transformation operations. The 384 KB of Flash supports application code, parameter tables, and embedded communications without requiring an external program-memory device. For a practical implementation, assign timer outputs for PWM, connect encoder or sensor inputs through the relevant alternate functions, and verify the exact pin assignments in the manufacturer pin table. This device is especially appropriate when local computation, deterministic control, and a compact 64-pin LQFP implementation matter more than the lowest possible unit cost.
Digital Power Conversion
The STM32F303RDT6 is suitable for digital power controllers that combine supervisory functions with faster analog and timing resources. Its 72 MHz Cortex-M4 architecture can execute compensation calculations, fault handling, telemetry formatting, and communication tasks while dedicated timers support switching sequences. The 384 KB of Flash and 64 KB of SRAM provide room for control tables, fault logs, and working buffers on one device. A practical design should route the timing channels carefully, keep sensitive analog paths compact, and confirm whether the selected power-conversion architecture requires specific fast-switching outputs or comparator functions. Because peripheral assignments differ among STM32F303 variants, the STM32F303RDT6 is best used when its complete pin list and mixed-signal resources match the intended board.
Industrial Data Acquisition
The STM32F303RDT6 can serve as the central controller in a compact measurement system that combines analog acquisition, signal processing, and local data transfer. Its 12-bit ADC feature supports applications where the required resolution is compatible with that converter, while the 72 MHz Cortex-M4 core can perform filtering, calibration, scaling, and protocol formatting without a separate digital processor. With 384 KB of Flash and 64 KB of SRAM, the controller accommodates firmware, lookup tables, sample buffers, and communication routines. Designers should establish the analog front end independently from the digital MCU and follow the recommended decoupling and layout practices to limit converter and digital interference. Confirm sampling requirements, available timer resources, communication peripherals, and the exact signal-to-pin mapping before finalizing the instrumentation design.
Communication Gateway
The STM32F303RDT6 fits communication-oriented embedded gateways that need protocol handling alongside real-time control functions. The 32-bit Cortex-M4 core operating at up to 72 MHz provides enough instruction throughput for serial framing, buffering, routing, and supervisory logic, while 384 KB of Flash supports multiple protocol stacks and application features. Its 64 KB of SRAM can accommodate transmit and receive buffers, although higher message volumes may require careful buffering or external memory. A production design should identify the required USART, SPI, USB, or other communication resources, then map them to pins without conflicting with control signals. Clocking, low-power modes, bootloader behavior, and peripheral assignments must be validated through the STM32F303xD/E documentation before using the part in a gateway that must remain serviceable.
Precision Measurement Instrument
The STM32F303RDT6 can support compact precision-instrument front ends that combine signal acquisition, calibration, filtering, and display or communications. The 72 MHz ARM Cortex-M4 core handles numerical operations efficiently, and its FPU improves floating-point filtering and compensation workloads. The 384 KB Flash capacity can hold calibration tables and control firmware, while 64 KB of SRAM supports working buffers. In an analog measurement design, the key engineering task is preserving signal integrity: use a defined analog front end, maintain short analog routes, separate sensitive references from digital switching activity, and follow the manufacturer supply-decoupling recommendations. Confirm that the 12-bit ADC performance, reference strategy, timer requirements, and temperature behavior satisfy the instrument’s measurement specification.
Embedded Automation Controller
The STM32F303RDT6 is appropriate for compact automation equipment that sequences actuators, monitors inputs, and manages communications in real time. Its 72 MHz Cortex-M4 core can coordinate multiple timer-driven tasks and event handling, while 384 KB of Flash and 64 KB of SRAM provide ample room for structured application code and diagnostics. The 64-LQFP package keeps the footprint practical for multilayer control boards but requires careful escape routing between its 64 leads. Designers should partition analog sensing, digital control, and communication paths, use manufacturer-recommended power filtering, and verify every alternate-function mapping against the exact device pinout. This MCU is a strong fit when a single programmable device must bridge real-time control and higher-level embedded communications without relying on a separate microprocessor.
エンジニアリング参考データ: STM32F303RDT6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Brand | STMicroelectronics |
| Package | 64-LQFP (10 x 10 mm) |
| Processor Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 72 MHz |
| Flash Memory | 384 KB |
| SRAM | 64 KB |
| Instruction Width | 32-bit RISC |
| Floating-Point Unit | Integrated |
主な差別化要因
- Balanced local processing and memory resources (vs STM32F303RET6)
- Compact 64-lead mixed-signal controller footprint (vs STM32F334R8T7)
- 72 MHz Cortex-M4 performance with integrated FPU (vs STM32F334R8T7)
設計ノート
Design the supply network from the manufacturer’s STM32F303xD/E electrical recommendations. Place the required bulk and high-frequency decoupling capacitors at the corresponding power pins with very short ground returns, and keep switching-regulator routing separate from sensitive analog inputs. Because the exact voltage range and external-component values are not established here, verify them in the official datasheet before selecting capacitors, regulators, or power-sequencing components.
Use the 64-LQFP land pattern and pin numbering from the manufacturer package drawing rather than inferring continuity from a schematic alone. Preserve access to all 64 leads during paste printing, inspection, and rework planning. Route high-current motor or power-conversion outputs away from ADC inputs and communication lines, and use a continuous ground strategy where the board stackup permits it to reduce return-path discontinuities.
Do not substitute another STM32F303 memory-density variant solely because it uses the same LQFP package. Flash capacity, peripheral mapping, pin availability, and firmware configuration can differ even when the core frequency remains 72 MHz. A candidate should pass a complete pin-by-pin review, electrical comparison, peripheral-function audit, linker-layout check, and boot or programming test before being approved as a second source.
For analog measurement or control functions, establish a quiet reference and analog ground strategy before allocating board area to digital interfaces. Keep the MCU analog input traces short, avoid running them beneath high-current switching paths, and use a defined analog front end for gain and filtering. The 12-bit ADC feature does not by itself establish overall measurement accuracy; sensor, reference, layout, and calibration errors must be included in the system error budget.
The 72 MHz Cortex-M4 core with FPU supports responsive computation, but real-time performance still depends on interrupt priority, peripheral setup, memory latency, and bus contention. Profile the intended control loop and communications workload on the final clock configuration. Use hardware timers for precise timing instead of relying on software delays, and review the memory map and linker configuration whenever the firmware exceeds the internal SRAM budget.
コンプライアンス情報
Compliance declarations are not stated in the available product information. Confirm the current material and environmental declarations for the exact ordering code with STMicroelectronics.