STMicroelectronics

STM32F303RDT6 - 72MHz Cortex-M4 MCU | STMicroelectronics

MPN: STM32F303RDT6 ✓ 啟用中
64-LQFP, 10 x 10 mm Package 72 MHz Speed 384 KB (384K x 8) Memory
MOQ: 1 |

STM32F303RDT6 概覽

The STMicroelectronics STM32F303RDT6 is a 32-bit ARM Cortex-M4 microcontroller with FPU operating at up to 72 MHz, combining 384 KB of Flash memory with 64 KB of SRAM in a 64-pin LQFP package. It is designed for compact embedded systems that require mixed-signal control, fast peripheral operation, and deterministic real-time processing without an external memory interface.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The STM32F303 belongs to the STM32F3 mixed-signal MCU family, where the ARM Cortex-M4 core sits between general-purpose embedded control and higher-performance digital signal processing. Its floating-point unit accelerates many control, filtering, and signal-transformation operations in real time.

Three defining parameters define this controller: a 72 MHz operating frequency, 384 KB of Flash program memory, and a 64-pin LQFP 10 x 10 mm package. The 64 KB SRAM provides working memory for algorithms, communication buffers, and application tasks. The STM32F303xD/E family also provides a mixed-signal feature set intended for industrial control, instrumentation, motor-control, communications, and compact consumer equipment.

The Cortex-M4 architecture supports a broad embedded software ecosystem, including C/C++ application code, interrupt-driven control, timer-based sequencing, and communication stacks. Compared with a smaller 8- or 16-bit controller, the 32-bit architecture provides greater address space and arithmetic capacity, while the on-chip Flash and SRAM reduce external component count. At 72 MHz, the MCU can combine control-loop servicing with peripheral data processing rather than offloading every task to an external processor.

Typical uses include motor and power-conversion control, measurement front ends, data acquisition units, communication gateways, and compact industrial controllers. Designers can use the mixed-signal peripherals to sample analog inputs, operate timers, generate control signals, and manage communication tasks within a unified device. Firmware and peripheral assignments should be checked against the complete STM32F303xD/E reference documentation before a new PCB is released.

A key hardware consideration is decoupling. Place the manufacturer-recommended bulk and high-frequency capacitors close to the corresponding supply pins, preserve the package land pattern, and route sensitive analog and communication signals away from high-current switching nodes. Firmware, clock configuration, peripheral initialization, and pin multiplexing must match the exact pinout in the manufacturer datasheet.

This page consolidates the confirmed processor, memory, frequency, package, and sourcing details with practical application guidance, design notes, and engineering comparisons. It also distinguishes verified pin-compatible alternatives from merely similar controllers so engineers can evaluate footprint, memory, peripheral, and lifecycle requirements before committing to a replacement.

直接替換替代品,適用於 STM32F303RDT6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: STM32F303RDT6 (相同外形與佔位) — 差異在於 Flash Memory, Package, ADC, Comparators, DAC.

STMicroelectronics
Flash Memory: 128 KB (128K x 8)
Package: 64-LQFP (10 x 10 mm)
ADC: 12-bit, up to 5 MSPS, with PGA
比較對象 STM32F303RDT6 →
STMicroelectronics
Flash Memory: 256 KB
Package: LQFP-64 (10x10 mm)
ADC: 4x 12-bit, up to 5 MSPS
比較對象 STM32F303RDT6 →

此產品無可直接替換的替代品。

申請替代品

STM32F303RDT6 最大額定值與電氣特性

Product Type 32-bit ARM Cortex-M4 mixed-signal microcontroller
Processor Core ARM Cortex-M4 with FPU
Instruction Set 32-bit RISC
Maximum CPU Frequency 72 MHz
Flash Memory 384 KB (384K x 8)
SRAM 64 KB
封裝 64-LQFP, 10 x 10 mm
腳位數 64 pins
安裝類型 Surface mount
Product Family STM32F303xD/E
Core Architecture ARM Cortex-M4
Floating-Point Unit Integrated
ADC Resolution 12-bit

STM32F303RDT6 64-lqfp, 10 x 10 mm 腳位配置指南

STM32F303RDT6(64-lqfp, 10 x 10 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

STM32F303RDT6 的 64-lqfp, 10 x 10 mm 封裝腳位圖

無詳細腳位定義資料: STM32F303RDT6.

請參閱 資料表 以查看完整腳位配置。

典型應用

STM32F303RDT6 適用於 6 應用s: Industrial Motor Control, Digital Power Conversion, Industrial Data Acquisition, Communication Gateway, Precision Measurement Instrument, Embedded Automation Controller.

🏭

Industrial Motor Control

The STM32F303RDT6 fits compact motor controllers that need deterministic timing, fast arithmetic, and substantial local program memory. Its 72 MHz ARM Cortex-M4 core can service control loops, execute protection logic, and process current or position measurements, while the FPU accelerates many filtering and transformation operations. The 384 KB of Flash supports application code, parameter tables, and embedded communications without requiring an external program-memory device. For a practical implementation, assign timer outputs for PWM, connect encoder or sensor inputs through the relevant alternate functions, and verify the exact pin assignments in the manufacturer pin table. This device is especially appropriate when local computation, deterministic control, and a compact 64-pin LQFP implementation matter more than the lowest possible unit cost.

⚡

Digital Power Conversion

The STM32F303RDT6 is suitable for digital power controllers that combine supervisory functions with faster analog and timing resources. Its 72 MHz Cortex-M4 architecture can execute compensation calculations, fault handling, telemetry formatting, and communication tasks while dedicated timers support switching sequences. The 384 KB of Flash and 64 KB of SRAM provide room for control tables, fault logs, and working buffers on one device. A practical design should route the timing channels carefully, keep sensitive analog paths compact, and confirm whether the selected power-conversion architecture requires specific fast-switching outputs or comparator functions. Because peripheral assignments differ among STM32F303 variants, the STM32F303RDT6 is best used when its complete pin list and mixed-signal resources match the intended board.

📟

Industrial Data Acquisition

The STM32F303RDT6 can serve as the central controller in a compact measurement system that combines analog acquisition, signal processing, and local data transfer. Its 12-bit ADC feature supports applications where the required resolution is compatible with that converter, while the 72 MHz Cortex-M4 core can perform filtering, calibration, scaling, and protocol formatting without a separate digital processor. With 384 KB of Flash and 64 KB of SRAM, the controller accommodates firmware, lookup tables, sample buffers, and communication routines. Designers should establish the analog front end independently from the digital MCU and follow the recommended decoupling and layout practices to limit converter and digital interference. Confirm sampling requirements, available timer resources, communication peripherals, and the exact signal-to-pin mapping before finalizing the instrumentation design.

🌐

Communication Gateway

The STM32F303RDT6 fits communication-oriented embedded gateways that need protocol handling alongside real-time control functions. The 32-bit Cortex-M4 core operating at up to 72 MHz provides enough instruction throughput for serial framing, buffering, routing, and supervisory logic, while 384 KB of Flash supports multiple protocol stacks and application features. Its 64 KB of SRAM can accommodate transmit and receive buffers, although higher message volumes may require careful buffering or external memory. A production design should identify the required USART, SPI, USB, or other communication resources, then map them to pins without conflicting with control signals. Clocking, low-power modes, bootloader behavior, and peripheral assignments must be validated through the STM32F303xD/E documentation before using the part in a gateway that must remain serviceable.

🔬

Precision Measurement Instrument

The STM32F303RDT6 can support compact precision-instrument front ends that combine signal acquisition, calibration, filtering, and display or communications. The 72 MHz ARM Cortex-M4 core handles numerical operations efficiently, and its FPU improves floating-point filtering and compensation workloads. The 384 KB Flash capacity can hold calibration tables and control firmware, while 64 KB of SRAM supports working buffers. In an analog measurement design, the key engineering task is preserving signal integrity: use a defined analog front end, maintain short analog routes, separate sensitive references from digital switching activity, and follow the manufacturer supply-decoupling recommendations. Confirm that the 12-bit ADC performance, reference strategy, timer requirements, and temperature behavior satisfy the instrument’s measurement specification.

🧩

Embedded Automation Controller

The STM32F303RDT6 is appropriate for compact automation equipment that sequences actuators, monitors inputs, and manages communications in real time. Its 72 MHz Cortex-M4 core can coordinate multiple timer-driven tasks and event handling, while 384 KB of Flash and 64 KB of SRAM provide ample room for structured application code and diagnostics. The 64-LQFP package keeps the footprint practical for multilayer control boards but requires careful escape routing between its 64 leads. Designers should partition analog sensing, digital control, and communication paths, use manufacturer-recommended power filtering, and verify every alternate-function mapping against the exact device pinout. This MCU is a strong fit when a single programmable device must bridge real-time control and higher-level embedded communications without relying on a separate microprocessor.

What is the operating frequency of the STM32F303RDT6?
The STM32F303RDT6 operates at up to 72 MHz using its ARM Cortex-M4 processor core. According to the STMicroelectronics STM32F303xD/E product documentation, the Cortex-M4 core includes an FPU and forms the basis of the STM32F3 mixed-signal family. The frequency supports interrupt-responsive control, real-time timer processing, communication handling, and digital filtering without requiring an external processor.
How much Flash and SRAM does the STM32F303RDT6 have?
The STM32F303RDT6 provides 384 KB of Flash memory and 64 KB of SRAM. STMicroelectronics describes the Flash organization as 384K x 8, while product listings identify 64 KB of SRAM. This combination allows moderately sized embedded applications, protocol stacks, and working buffers to reside on the microcontroller rather than requiring external memory for many designs.
What package does the STM32F303RDT6 use?
The STM32F303RDT6 uses a 64-pin LQFP package measuring 10 x 10 mm. The exact ordering code is identified by DigiKey and Mouser as a 64-LQFP device, while the STMicroelectronics family documentation identifies the STM32F303RDT6 as part of the STM32F303xD/E range. Use the manufacturer pin-definition table when assigning every PCB land and checking alternate-function routing.
Where can I download the STM32F303RDT6 datasheet and pinout?
The official STM32F303RDT6 product page and documentation hub provide the manufacturer datasheet and pin information. The product page is at the STM32F303RD URL shown on this page, while the STM32F303 documentation page links the family datasheet and supporting resources. Use the pin-description table and package drawing from those documents to assign tracks and verify exposed-power connections.
What is the best drop-in replacement for the STM32F303RDT6?
A genuine drop-in replacement must retain the 64-LQFP footprint, pin assignments, 72 MHz Cortex-M4 architecture, 384 KB Flash, 64 KB SRAM, and required mixed-signal peripherals. No candidate in the available cross-reference results meets all of those conditions with documented pin compatibility. The STM32F303RET6 appears in a parametric cross-reference result, but its Flash capacity differs, so it should not be called a drop-in replacement without board-specific validation.
Can the STM32F303RDT6 be used for motor control?
Yes, the STM32F303RDT6 is suitable for compact motor-control and digital-control systems that benefit from a 72 MHz ARM Cortex-M4 core, 384 KB of Flash, and 64 KB of SRAM. Its timing peripherals can support motor-control sequencing, while the FPU assists control calculations. Confirm the required PWM channels, encoder interfaces, analog inputs, and current-sense topology against the exact pinout before hardware release.
STM32F303RDT6 vs STM32F303RET6: which one is better for a new design?
Choose the STM32F303RDT6 when the design requires 384 KB of Flash, and choose the STM32F303RET6 when greater Flash capacity is needed in the same 64-pin LQFP family. The latter is not a functional drop-in substitute because its Flash capacity differs even though both belong to the STM32F303 family. Firmware partitioning, linker settings, boot behavior, and all peripheral connections must be reviewed before either substitution.
When should I choose the STM32F303RDT6 instead of a similar STM32F3 controller?
Choose the STM32F303RDT6 when a design needs the specific combination of a 72 MHz Cortex-M4 core, 384 KB Flash, 64 KB SRAM, and a 64-pin LQFP footprint. A controller with different memory capacity or peripheral assignments may require firmware, linker, or PCB changes. Selection should therefore begin with the required application interfaces and timers, then confirm memory, package, clock, temperature, and lifecycle requirements.
What can replace the STM32F303RDT6 on the same PCB?
No confirmed same-PCB replacement is established by the available cross-reference results. The STM32F303RET6 is the closest family candidate identified, but its different Flash capacity means it is not a guaranteed drop-in replacement. A second-source decision requires exact pin, package, electrical, peripheral, and firmware validation; until those checks are complete, treat the STM32F303RDT6 as the controlled BOM designation.
Is the STM32F303RDT6 the same as the STM32F303RET6?
No, the STM32F303RDT6 and STM32F303RET6 are related STM32F303 devices but do not have identical memory configurations. The target device has 384 KB of Flash, whereas the RET6 suffix identifies a different Flash-density member of the family. Both may use a 64-pin LQFP, but shared packaging alone does not make them pin-to-pin, firmware-compatible drop-in parts.
Where to buy the STM32F303RDT6 online?
Use the Request a Quote form on this page to request STM32F303RDT6 availability, MOQ, and lead-time confirmation for your required quantity and packaging configuration. The manufacturer product page, documentation hub, and authorized distribution channels can support purchasing decisions, but current commercial terms should be confirmed at the time of quotation rather than copied from an old listing.
What is the price of the STM32F303RDT6?
The current commercial price for the STM32F303RDT6 is obtained through the Request a Quote form on this page. The form allows quantity, package, delivery location, and production-volume requirements to be included in the request. Because distributor inventory and contract pricing can change, the quotation response is the appropriate source for the current unit and volume-break terms.
What is the lead time and stock status for the STM32F303RDT6?
Request the current lead time and stock position through the Request a Quote form on this page. The quote request should state the required quantity, 64-LQFP packing option, target delivery date, and whether multiple production releases are expected. This avoids treating a temporary channel inventory position as a guaranteed allocation for an ongoing embedded-control program.
What are the key specifications of the STM32F303RDT6 that engineers should know?
The STM32F303RDT6 is a 72 MHz, 32-bit ARM Cortex-M4 mixed-signal microcontroller with an FPU, 384 KB of Flash, 64 KB of SRAM, and a 64-pin 10 x 10 mm LQFP package. STMicroelectronics identifies it as an STM32F303xD/E family member with a 12-bit ADC feature. Its combination of real-time processing capacity and compact package suits embedded control and measurement equipment.
Is the STM32F303RDT6 suitable for industrial control and data acquisition?
The STM32F303RDT6 is suitable for many industrial-control and data-acquisition designs because it combines a 72 MHz Cortex-M4 core, 384 KB of Flash, 64 KB of SRAM, and mixed-signal capabilities. Its 12-bit ADC and extensive peripheral integration can reduce system size. Confirm analog accuracy, timer channels, communication interfaces, operating temperature, and industrial qualification requirements for the finished equipment.

工程參考資料,適用於 STM32F303RDT6 — 比較、設計指引及合規資訊。

選型指南

Choose the STM32F303RDT6 when the design needs a 72 MHz ARM Cortex-M4 core with FPU, 384 KB of Flash, 64 KB of SRAM, and a 64-pin LQFP footprint. It is a strong fit for real-time motor control, digital power conversion, data acquisition, communication gateways, and compact automation controllers. Select the STM32F303RET6 only when its larger Flash configuration is required and all pin, peripheral, boot, and firmware differences have been reviewed. The STM32F334R8T7 can suit high-resolution-timer designs, but its listed 64 KB Flash is substantially below the 384 KB available in the target device. For production second sourcing, do not assume that a shared package proves drop-in compatibility: validate the complete pin map, electrical limits, clock configuration, peripheral allocation, programming procedure, and application firmware before approving an alternative.

與替代品比較

參數 本產品
Brand STMicroelectronics
Package 64-LQFP (10 x 10 mm)
Processor Core ARM Cortex-M4
Maximum CPU Frequency 72 MHz
Flash Memory 384 KB
SRAM 64 KB
Instruction Width 32-bit RISC
Floating-Point Unit Integrated

主要差異化特點

  • Balanced local processing and memory resources (對比STM32F303RET6)
  • Compact 64-lead mixed-signal controller footprint (對比STM32F334R8T7)
  • 72 MHz Cortex-M4 performance with integrated FPU (對比STM32F334R8T7)

設計說明

Design the supply network from the manufacturer’s STM32F303xD/E electrical recommendations. Place the required bulk and high-frequency decoupling capacitors at the corresponding power pins with very short ground returns, and keep switching-regulator routing separate from sensitive analog inputs. Because the exact voltage range and external-component values are not established here, verify them in the official datasheet before selecting capacitors, regulators, or power-sequencing components.

Use the 64-LQFP land pattern and pin numbering from the manufacturer package drawing rather than inferring continuity from a schematic alone. Preserve access to all 64 leads during paste printing, inspection, and rework planning. Route high-current motor or power-conversion outputs away from ADC inputs and communication lines, and use a continuous ground strategy where the board stackup permits it to reduce return-path discontinuities.

Do not substitute another STM32F303 memory-density variant solely because it uses the same LQFP package. Flash capacity, peripheral mapping, pin availability, and firmware configuration can differ even when the core frequency remains 72 MHz. A candidate should pass a complete pin-by-pin review, electrical comparison, peripheral-function audit, linker-layout check, and boot or programming test before being approved as a second source.

For analog measurement or control functions, establish a quiet reference and analog ground strategy before allocating board area to digital interfaces. Keep the MCU analog input traces short, avoid running them beneath high-current switching paths, and use a defined analog front end for gain and filtering. The 12-bit ADC feature does not by itself establish overall measurement accuracy; sensor, reference, layout, and calibration errors must be included in the system error budget.

The 72 MHz Cortex-M4 core with FPU supports responsive computation, but real-time performance still depends on interrupt priority, peripheral setup, memory latency, and bus contention. Profile the intended control loop and communications workload on the final clock configuration. Use hardware timers for precise timing instead of relying on software delays, and review the memory map and linker configuration whenever the firmware exceeds the internal SRAM budget.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance declarations are not stated in the available product information. Confirm the current material and environmental declarations for the exact ordering code with STMicroelectronics.

資料驗證日期: 2026-11-15 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

STM32F303RDT6 datasheet STM32F303RDT6 pinout STM32F303RDT6 datasheet pdf STM32F303RDT6 specifications STM32F303RDT6 64 LQFP STM32F303RDT6 price STM32F303RDT6 stock STM32F303RDT6 equivalent STM32F303RDT6 replacement STM32F303RDT6 cross reference STM32F303RDT6 vs STM32F303RET6 STM32F303RDT6 footprint STM32F303RDT6 application circuit STMicroelectronics STM32F303RDT6

相關元件與詞彙

STMicroelectronics STM32F303RDT6 STM32F303xD/E ARM Cortex-M4 ARM Cortex-M4 FPU 32-bit RISC microcontroller mixed-signal microcontroller embedded controller semiconductor 384 KB Flash 64 KB SRAM 72 MHz 12-bit ADC 64-LQFP LQFP package surface mount STM32F3 industrial motor control digital power conversion data acquisition communication gateway precision measurement
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情