STM32F423ZHT6 - 100MHz Cortex-M4 1.5MB MCU | STMicroelectronics
部品番号: STM32F423ZHT6 ✓ 生産中STM32F423ZHT6 概要
An ARM Cortex-M4 microcontroller is a 32-bit RISC processor designed for embedded systems. The STM32F423ZHT6 belongs to the STM32F4 family, combining processor performance with integrated memory, communication peripherals, timers, and GPIO. Its hierarchy extends from the Cortex-M4 core to an ARM Cortex-M microcontroller, then to a general-purpose microprocessor and embedded semiconductor.
The device operates at up to 100 MHz and includes 1.5 MB of Flash memory. The 144-LQFP package provides a substantial number of external connections for sensors, actuators, communications, and mixed-signal interfaces. The T6 temperature and package suffix identifies the ordering variant, while the ZH family designation corresponds to the high-pin-count, 1.5 MB Flash configuration.
The Cortex-M4 architecture supports efficient digital signal-processing instructions and a single-precision floating-point unit. These capabilities are useful for filtering, control algorithms, communications protocol handling, and real-time computations without requiring a separate DSP. The combination of 100 MHz processing, 1.5 MB Flash, and a large package also makes the MCU suitable for gateways and embedded controllers with several external interfaces.
Typical applications include industrial automation, sensor aggregation, motor and motion control, communications equipment, medical instrumentation, and consumer equipment requiring multiple peripheral connections. Its large LQFP footprint makes assembly easier to inspect and rework than a fine-pitch ball-grid-array package, although the 144 leads require careful PCB layout and adequate spacing between high-speed and sensitive signals.
Power-supply design should preserve a clean 3.3 V rail and follow the manufacturer’s decoupling and pin-description guidance. Place bypass capacitors close to the appropriate supply pins, maintain short return paths, and use the package pin-description table when assigning tracks. Firmware reuse should also be checked because peripheral availability, interrupt assignments, and device features can vary within the STM32F4 family.
This page combines the verified 100 MHz Cortex-M4 performance, 1.5 MB Flash configuration, 144-LQFP packaging, structured alternatives, interface-focused applications, and practical PCB guidance. It also distinguishes confirmed product attributes from parameters that require direct confirmation in the manufacturer documentation.
ドロップイン代替品: STM32F423ZHT6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32F423ZHT6 (同一形状・フットプリント) — 相違点: Package, Flash Memory, SRAM, Mounting Type, ADC.
STM32F413ZHT6
✅ ドロップイン価格はお問い合わせください
データシートを見る →STM32F427ZHT6
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
STM32F429ZHT6
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
STM32F433ZHT6
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
STM32F407ZGT6
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.25 / 個
データシートを見る →STM32F423ZHT6 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | Arm Cortex-M4 with FPU and DSP instructions |
| Maximum CPU Frequency | 100 MHz |
| Instruction Set | 32-bit ARM RISC |
| Flash Memory | 1.5 MB |
| Flash Organization | 1.5 M x 8 bits |
| Operating Voltage | 3.3 V |
| パッケージ | 144-pin LQFP, 20 x 20 mm |
| 実装タイプ | Surface mount |
STM32F423ZHT6 144-pin lqfp, 20 x 20 mm ピン配置ガイド
STM32F423ZHT6 (144-pin lqfp, 20 x 20 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32F423ZHT6.
詳細は データシート をご参照ください。
主な用途
STM32F423ZHT6 の用途: 6 件s: Industrial Automation Controller, Sensor Aggregation Hub, Motor and Motion Control, Communications Gateway, Medical Instrumentation, Data Acquisition and Test Equipment.
Industrial Automation Controller
The STM32F423ZHT6 fits industrial automation equipment that requires real-time control alongside numerous sensor and actuator connections. Its Cortex-M4 core operates at up to 100 MHz, while 1.5 MB of Flash provides room for control software, communications, and configuration data. The 144-LQFP package exposes a broad pin set for digital inputs, outputs, encoders, communications, and analog front-end control. Place the MCU near the connector field, keep power returns continuous, and isolate switching nodes from precision analog inputs. The principal trade-off is the relatively large 20 x 20 mm footprint compared with a smaller microcontroller, but the package remains straightforward to inspect and assemble.
おすすめ
Sensor Aggregation Hub
The STM32F423ZHT6 can serve as the central processor in a multi-sensor industrial or environmental monitoring system. Its 100 MHz Cortex-M4 performance supports acquisition sequencing, filtering, calibration, and data packaging, while the 144-pin LQFP provides enough connections for several sensor buses, status signals, and communication peripherals. The 1.5 MB Flash can store firmware, lookup data, and logging configuration. Use separate routing for sensitive sensor inputs and switching outputs, provide local bypass capacitance at supply pins, and keep sensor returns away from motor or relay currents. Firmware should include calibration tables and sensor diagnostics to prevent slow drift from affecting measurement accuracy.
おすすめ
Motor and Motion Control
The STM32F423ZHT6 is suitable for motion-control logic that must process position feedback and coordinate timers, communication links, and safety-related status signals. The Cortex-M4 core provides DSP instructions and a floating-point unit at up to 100 MHz, helping execute control calculations and interpolation without a separate processor. Its 144-pin LQFP supports encoders, current-sense signals, gate-driver interfaces, and communications. Timing-critical signals require short, controlled traces, while power switching stages should be spatially separated from the MCU and analog ground paths. Confirm timer channels and pin remapping in the device documentation, and validate the firmware timing against the worst-case load and interrupt-latency requirements.
おすすめ
Communications Gateway
The STM32F423ZHT6 can act as a protocol-conversion or embedded communications gateway when a design needs more processing capacity and I/O than a compact microcontroller provides. The 100 MHz Cortex-M4 core is well suited to protocol framing, buffering, and routing, and the 1.5 MB of Flash offers space for multiple stacks and application firmware. The 144-lead package can support several serial interfaces, Ethernet-related circuitry, status indicators, and console access. Keep high-speed communication traces impedance-controlled, provide a continuous ground reference, and place transient-protection devices close to external connectors. Use the manufacturer pin table to confirm alternate-function availability for each selected peripheral and avoid assigning a signal to a pin that is unavailable at startup.
おすすめ
Medical Instrumentation
The STM32F423ZHT6 is suitable for monitoring and diagnostic instruments that need deterministic processing, substantial program storage, and numerous external connections. Its Cortex-M4 core supports floating-point and DSP operations at up to 100 MHz, while 1.5 MB of Flash can hold firmware for acquisition, signal analysis, and user-interface functions. The large LQFP package can connect sensors, displays, communication ports, and control signals without an external I/O controller. Analog front-end circuitry should use isolated, low-noise supply paths, and digital activity must be separated from sensitive measurement nodes. Medical designs also require application-specific safety, EMC, and usability validation; this component designation alone does not establish medical certification.
おすすめ
Data Acquisition and Test Equipment
The STM32F423ZHT6 fits compact data-acquisition and test equipment requiring a fast control processor, multiple external interfaces, and local nonvolatile program storage. The 100 MHz Cortex-M4 core can perform acquisition control, filtering, and data formatting, while the 1.5 MB Flash supports embedded control software and test sequences. Its 144-pin LQFP provides pins for converters, digital stimuli, communications, and status indicators. Maintain short paths from converters to the MCU, use continuous grounding beneath high-speed interfaces, and provide separate filtering for analog and digital supply paths. Calibration data and instrument timing should be stored and verified under worst-case operating conditions, particularly when a small measurement error could affect the final test result.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32F423ZHT6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32F413ZHT6 | STM32F427ZHT6 | STM32F429ZHT6 | STM32F433ZHT6 | STM32F407ZGT6 |
|---|---|---|---|---|---|---|
| Package | 144-pin LQFP, 20 x 20 mm | 144-pin LQFP | 144-pin LQFP | 144-pin LQFP | 144-pin LQFP | 144-pin LQFP |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
| Product Series | STM32F4 high-performance access line | STM32F4 | STM32F4 | STM32F4 | STM32F4 | STM32F4 |
主な差別化要因
- Balanced processing speed and memory in a 144-LQFP controller (vs STM32F407ZGT6)
- Lower maximum frequency than faster STM32F4 LQFP-144 family members (vs STM32F427ZHT6)
- Larger program-memory budget than a 1 MB STM32F4 alternative (vs STM32F407ZGT6)
設計ノート
Assign every LQFP-144 connection from the STM32F423xH pin-description table and reserve all power, ground, reset, clock, boot, and debug functions before routing. Keep the 3.3 V supply traces short and place local bypass capacitors at the associated supply pins. Provide a continuous ground reference beneath the device where the PCB stack-up permits, and check every high-speed or externally accessible line against the board’s return-current path.
Separate clocks, high-speed serial interfaces, and switching-control outputs from sensitive analog inputs. Route continuous return paths beneath pairs where practical, avoid splitting ground planes beneath the MCU, and use short point-to-point connections for high-speed signals. The 100 MHz CPU does not by itself determine edge rates on every interface, so external transceiver timing, impedance, and the manufacturer’s application guidance should control the final layout.
Do not assume that every 144-pin STM32F4 device is interchangeable. Before replacing the STM32F423ZHT6, compare alternate-function mappings, clock configuration, GPIO types, memory capacities, timer resources, communication peripherals, debug access, bootloader behavior, and package pin definitions. A shared 144-LQFP outline does not guarantee identical electrical functionality. Preserve the exact device identifier in firmware and production documentation to prevent an unintended variant from entering the BOM.
Estimate the junction-temperature budget from regulator dissipation, ambient temperature, and the PCB’s copper and via arrangement rather than treating the 3.3 V rating as a direct current limit. For a compact 144-LQFP layout, spread heat through nearby ground pads and vias where the package and board construction permit. Validate the final assembly with the maximum expected ambient temperature and operating workload, because internal MCU activity and power-supply loss both contribute to heat generation.
コンプライアンス情報
The exact compliance declarations for the STM32F423ZHT6 ordering code must be confirmed in the STMicroelectronics product documentation or declarations for the exact package and shipment configuration.