STM32F439IIH6 - 180MHz Cortex-M4 MCU | STMicroelectronics
部品番号: STM32F439IIH6 ✓ 生産中STM32F439IIH6 概要
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one package. The STM32F4 family occupies the microcontroller level of the embedded hierarchy: STM32F4 device -> 32-bit microcontroller -> Arm Cortex-M4 processor -> embedded semiconductor. Devices in this family are used where deterministic control, efficient real-time execution, and a compact integrated design are more important than the high compute density of an application processor.
The STM32F439IIH6 combines a 180 MHz maximum operating frequency with 2 MB of Flash and 256 KB of RAM. Its single-precision FPU accelerates floating-point calculations, while the Cortex-M4 DSP instruction set supports signal-processing workloads. The 176+25 UFBGA arrangement supports compact PCB layouts, although its fine ball pitch requires careful assembly, inspection, and PCB layout practices.
The STM32F439xx family combines the Cortex-M4 processing core with extensive embedded peripherals, including general-purpose timers, communication interfaces, GPIO, and low-power management features. Its 180 MHz operating ceiling provides additional performance headroom for control loops and protocol handling, while the FPU reduces the computational cost of filtering, sensor conditioning, and motor-control calculations.
Typical uses include industrial automation and factory equipment, industrial networking, audio and digital signal processing, medical monitoring, and connected sensor systems. In a motor-control design, the device can combine timer-based PWM generation with fast GPIO control and FPU-assisted control algorithms. For networked equipment, its Cortex-M4 performance and large Flash capacity help support protocol stacks and application firmware within a single compact device.
Board design requires strict attention to the UFBGA escape routing and power distribution. Place decoupling capacitors adjacent to the relevant supply pins, preserve the manufacturer's recommended layout and stack-up constraints, and validate soldering-process capability before production. Firmware should use the STM32CubeMX configuration tools and the appropriate STM32Cube HAL or LL drivers for initialization and peripheral control.
This page combines manufacturer specifications, package and memory details, sourcing information, practical application guidance, and a conservative comparison of same-family drop-in candidates. It also distinguishes electrically similar options from replacements that may require firmware, peripheral, qualification, or PCB validation.
ドロップイン代替品: STM32F439IIH6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32F439IIH6 (同一形状・フットプリント) — 相違点: Flash Memory, Package, Core, Mounting Type, Performance.
STM32F439IIT6
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →STM32F437IIH6
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →STM32F429IIH6
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →STM32F439IIH6 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Processor Core | Arm Cortex-M4 with single-precision FPU |
| Maximum CPU Frequency | 180 MHz |
| Flash Memory | 2 MB |
| Flash Organization | 2M x 8 bits |
| RAM | 256 KB |
| Instruction Set | 32-bit ARM RISC with DSP instructions |
| Floating-Point Support | Single precision |
| パッケージ | 176+25 UFBGA |
| Package Dimensions | 10 mm x 10 mm |
| 実装タイプ | Surface mount |
STM32F439IIH6 10 mm x 10 mm ピン配置ガイド
STM32F439IIH6 (10 mm x 10 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32F439IIH6.
詳細は データシート をご参照ください。
主な用途
STM32F439IIH6 の用途: 6 件s: Industrial Automation and Factory Control, Industrial Networking Gateway, Audio and Digital Signal Processing, Medical Monitoring Instrument, Motor Control and Power Conversion, Connected Sensor and IoT Node.
Industrial Automation and Factory Control
The STM32F439IIH6 fits factory-control equipment that combines deterministic timing, digital signal processing, and multiple communication tasks. Its Cortex-M4 core operates up to 180 MHz, while the single-precision FPU and DSP instructions accelerate filtering and control calculations without requiring a separate DSP. The 2 MB Flash stores control firmware and lookup data, and 256 KB of RAM supports protocol buffers and application state. In a machine controller, timers can generate precise PWM and sampling intervals while GPIO and serial interfaces connect sensors and actuators.
おすすめ
Industrial Networking Gateway
The STM32F439IIH6 is suitable for an embedded networking gateway that must manage several protocol tasks within a compact controller. Its 180 MHz Arm Cortex-M4 execution capability provides room for Ethernet or serial protocol processing, while 2 MB of Flash accommodates networking stacks and application firmware. The 256 KB SRAM can support receive buffers, connection state, and diagnostic data. A design can use dedicated timers for periodic sampling and GPIO for reset, status, and alarm functions. Peripheral availability and the complete pin assignment must be verified against the required network interfaces.
おすすめ
Audio and Digital Signal Processing
The STM32F439IIH6 supports audio and digital signal-processing applications because its Cortex-M4 core combines a 180 MHz operating frequency with single-precision FPU and DSP instructions. These resources can accelerate filters, mixing, decoding, and control operations while the 2 MB Flash stores program code and 256 KB of RAM accommodates sample buffers. The MCU can also integrate communications and user-interface control in one compact package. Practical designs should align sampling clocks with timer resources and verify the required codec, DMA, and serial interface assignments in the datasheet.
おすすめ
Medical Monitoring Instrument
The STM32F439IIH6 can serve as the central controller in a medical monitoring instrument that combines sensor acquisition, filtering, and a local communications interface. Its single-precision FPU and DSP instructions improve throughput for signal conditioning, while the 180 MHz Cortex-M4 core can supervise acquisition timing and user communication. The 256 KB RAM provides room for sample and filtering buffers, and the 2 MB Flash supports application firmware. The 176+25 UFBGA package also reduces board area, although medical-system validation, safety requirements, and the applicable external standards remain design-level responsibilities.
おすすめ
Motor Control and Power Conversion
The STM32F439IIH6 is appropriate for sophisticated motor-control and power-conversion systems that require accurate timing, fast control execution, and compact integration. Its 180 MHz Cortex-M4 core and single-precision FPU can execute control and compensation algorithms, while DSP instructions assist with signal analysis. Two megabytes of Flash provides room for algorithms and parameters, and 256 KB of RAM can hold sampled currents, velocities, and diagnostic states. Timers can generate complementary PWM signals when supported by the selected pin configuration, while ADC and DMA resources can capture feedback data for closed-loop control.
おすすめ
Connected Sensor and IoT Node
The STM32F439IIH6 supports connected sensor nodes that combine local signal processing with communications and control logic. At up to 180 MHz, the Cortex-M4 core can filter sensor data, apply scaling or compensation, and manage a communications protocol concurrently. The 2 MB Flash is useful for firmware and configuration data, while 256 KB of RAM accommodates buffered samples and protocol state. Low-power behavior, radio integration, and security requirements should be evaluated separately from the MCU specifications. GPIO, timer, ADC, and serial assignments must be checked against the intended sensor board before schematic approval.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32F439IIH6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32F439IIT6 | STM32F437IIH6 | STM32F429IIH6 |
|---|---|---|---|---|
| Package | 176+25 UFBGA, 10 mm x 10 mm | 176+25 UFBGA | 176+25 UFBGA | 176+25 UFBGA |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M4 with single-precision FPU | Arm Cortex-M4 with single-precision FPU | Arm Cortex-M4 with single-precision FPU | Arm Cortex-M4 with single-precision FPU |
| Maximum CPU Frequency | 180 MHz | 180 MHz | 180 MHz | 180 MHz |
| Flash Memory | 2 MB | 2 MB | 2 MB | 2 MB |
| RAM | 256 KB | 256 KB | 256 KB | 256 KB |
| DSP Instruction Support | Yes | Yes | Yes | Yes |
| Peripheral and Feature Set | STM32F439 family | STM32F439 family; ordering-code differences require review | STM32F437 family | STM32F429 family |
主な差別化要因
- High-performance Cortex-M4 compute with integrated floating-point acceleration (vs STM32F429IIH6)
- Substantial embedded memory in a compact BGA (vs STM32F439IIT6)
- Deterministic control and DSP capability (vs STM32F437IIH6)
設計ノート
Route the STM32F439IIH6 as a fine-pitch BGA using the manufacturer land pattern and assembly guidelines. Maintain uninterrupted supply and ground planes beneath the device, use short via connections where layer transitions are required, and avoid placing noisy or high-current paths directly beneath sensitive ball assignments. The 176+25 UFBGA package also requires adequate solder-mask and paste controls for repeatable assembly.
Place the manufacturer-recommended bypass capacitors directly beside their associated power balls, with the shortest possible ground return to the common supply-reference plane. Confirm the exact capacitor values, voltage ratings, and allowable DC-bias derating from the datasheet and component specifications. Because the target is a 180 MHz microcontroller, stable low-impedance supply distribution is essential for reliable clocking, signal integrity, and ADC-based measurements.
Keep clock, debug, and high-speed communication nets away from analog inputs and switching-power-node copper where possible. Provide a continuous return path beneath controlled-impedance routes and match external network components to the selected communication standard. Validate the final BGA escape pattern, layer stack-up, via geometry, and assembly process with the chosen PCB and manufacturing capability before releasing production artwork.
Do not substitute an MCU solely because its package drawing appears identical. Confirm the exact ordering code, temperature grade, Flash size, RAM size, peripheral set, cryptographic features, and pin multiplexing in the manufacturer datasheet. After any same-family replacement, rebuild the firmware with the correct device definition, rerun peripheral tests, and repeat timing, ADC, communications, and power-consumption validation before production use.
コンプライアンス情報
Compliance status for the exact STM32F439IIH6 ordering code was not explicitly identified. Review the current STMicroelectronics product documentation and applicable material declarations before using the device in a regulated production design.