STM32F439NIH6 - 180MHz Cortex-M4 MCU | STMicroelectronics
部品番号: STM32F439NIH6 ✓ 生産中STM32F439NIH6 概要
A microcontroller is a programmable semiconductor integrated circuit containing a processor core, memory, peripherals, and communication interfaces. The STM32F4 family is positioned within the hierarchy of 32-bit Arm microcontrollers, embedded processors, and system-on-chip devices. It is designed for applications requiring considerably more computation than a basic 8-bit controller while retaining a compact package, deterministic peripheral access, and low-power operation.
The STM32F439NIH6 operates at up to 180 MHz and includes a single-precision floating-point unit and DSP instructions. Its 2 MB flash provides substantially more program storage than entry-level Cortex-M devices, while the manufacturer identifies the device as part of STMicroelectronics' high-performance advanced line. The 216-TFBGA arrangement exposes a large number of GPIO and peripheral connections while maintaining a 13 x 13 mm body size.
Typical applications include industrial automation controllers, motor-control systems, networked sensors, human-machine interfaces, audio processing, test and measurement equipment, and connected embedded products. The high clock rate supports responsive control loops and computationally intensive signal processing, while the large pin count enables simultaneous use of communications, display interfaces, analog functions, and digital I/O.
Design considerations center on power integrity, decoupling, thermal performance, and correct BGA assembly. Place the required input, output, and bypass capacitors adjacent to their associated supply pins, route high-current paths with minimal loop area, and use an assembly process suitable for a 216-TFBGA device. Review the manufacturer's datasheet for the complete pin list, exposed-pad requirements, and recommended land pattern before releasing the PCB design.
This page combines the exact STM32F439NIH6 ordering information with family-level engineering guidance, qualified same-brand alternatives, and design checks that help buyers evaluate package reuse, firmware impact, and supply continuity before requesting a quote.
ドロップイン代替品: STM32F439NIH6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32F439NIH6 (同一形状・フットプリント) — 相違点: Package, Flash Memory, Operating Temperature, Core Architecture, Timers.
STM32F439NGH6
✅ ドロップイン📋 参考代替品(カタログ未掲載)
STM32F469NIH6
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →STM32F429NIH6
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$8.63 / 個
データシートを見る →STM32F429NGH6
✅ ドロップイン価格はお問い合わせください
データシートを見る →STM32F437NIH6
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
STM32F439NIH6 最大定格&電気的特性
| Product Type | 32-bit microcontroller |
| Manufacturer | STMicroelectronics |
| Processor Core | Arm Cortex-M4 |
| Architecture | 32-bit RISC |
| 最大クロック周波数 | 180 MHz |
| Flash Memory | 2 MB |
| Flash Organization | 2M x 8 bit |
| DSP Support | Yes |
| Floating-Point Unit | Single-precision FPU |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| パッケージ | 216-TFBGA, 13 x 13 mm |
| Total Pin Count | 216 pins |
| 実装タイプ | Surface mount |
STM32F439NIH6 216-tfbga, 13 x 13 mm ピン配置ガイド
STM32F439NIH6 (216-tfbga, 13 x 13 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32F439NIH6.
詳細は データシート をご参照ください。
主な用途
STM32F439NIH6 の用途: 6 件s: Industrial Automation Controller, Motor Control and Power Conversion, Graphical User Interface Controller, Networked Sensor and Edge Device, Audio and Digital Signal Processing, Test and Measurement Instrument.
Industrial Automation Controller
The STM32F439NIH6 fits industrial automation controllers that combine deterministic control with communications and a human-machine interface. Its Arm Cortex-M4 core operates at up to 180 MHz, providing headroom for control loops, protocol processing, and supervisory logic. The 2 MB flash accommodates larger application firmware than a 1 MB STM32F4 variant, while the 216-TFBGA package exposes numerous GPIO and peripheral functions. Designers should prioritize regulator stability, independent analog and digital supply filtering, and thermal review of the dense BGA layout.
おすすめ
Motor Control and Power Conversion
The STM32F439NIH6 is appropriate for digital motor control and power-conversion equipment requiring fast computation alongside extensive peripheral connectivity. Its 180 MHz Cortex-M4 core supports timing-intensive control software, DSP instructions accelerate signal calculations, and the single-precision FPU supports real-time numeric processing. The 216-TFBGA package provides a high pin count for gate-drive signals, feedback inputs, communications, and protection monitoring. Validation must confirm timer features, ADC performance, operating-temperature limits, and the voltage range used by the target motor-drive stage.
おすすめ
Graphical User Interface Controller
The STM32F439NIH6 can serve as the central controller in a compact graphical human-machine interface because its 180 MHz Cortex-M4 core handles interface updates alongside embedded application logic. The 2 MB flash provides additional code space for graphics routines, fonts, and communication services, while the 216-pin package offers ample connections for a display interface, touch input, buttons, and status indicators. The LCD controller, external-interface requirements, and memory bandwidth should be checked against the specific display architecture before schematic and PCB release.
おすすめ
Networked Sensor and Edge Device
The STM32F439NIH6 is well suited to networked sensing and edge-processing equipment where sensor conditioning, local computation, and communications must share one controller. The 180 MHz core can process local algorithms, while DSP and FPU support accelerates digital filtering and floating-point work. Its 2 MB flash supports embedded networking stacks and application code, and the 216-TFBGA pin count allows multiple serial interfaces, analog inputs, and status outputs. The power design should separately account for radio modules and sensors because their current demand is outside the MCU specification.
おすすめ
Audio and Digital Signal Processing
The STM32F439NIH6 applies to audio and digital signal-processing products that benefit from an FPU, DSP instructions, and a high-performance 32-bit core. At up to 180 MHz, the device can execute filtering, mixing, and control software concurrently with communication tasks. The 2 MB flash provides more room for signal-processing code than 1 MB STM32F4 alternatives, and the 216-TFBGA package supports multiple serial-audio, control, and debug connections. Actual signal-chain performance depends on the selected ADC, DAC, clocking scheme, and analog layout.
おすすめ
Test and Measurement Instrument
The STM32F439NIH6 is appropriate for compact test and measurement instruments requiring a balance of processing speed, storage, and I/O. The 180 MHz Arm Cortex-M4 core can manage instrument control, data acquisition, calibration, and communication, while the single-precision FPU assists numerical processing. Its 2 MB flash supports embedded firmware and instrument control code, and the 216-TFBGA package exposes numerous analog, digital, and serial pins. Measurement accuracy still depends on external references, analog front ends, shielding, calibration, and careful grounding.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32F439NIH6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32F439NGH6 | STM32F469NIH6 | STM32F429NIH6 | STM32F429NGH6 | STM32F437NIH6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 216-TFBGA (13 x 13 mm) | 216-TFBGA (13 x 13 mm) | 216-TFBGA (13 x 13 mm) | 216-TFBGA (13 x 13 mm) | 216-TFBGA (13 x 13 mm) | 216-TFBGA (13 x 13 mm) |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum Clock Frequency | 180 MHz | 180 MHz | 180 MHz | 180 MHz | 180 MHz | 180 MHz |
| Flash Memory | 2 MB | 2 MB | 2 MB | 1 MB | 1 MB | 1 MB |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| DSP and FPU Support | DSP and single-precision FPU | DSP and FPU | DSP and FPU | DSP and FPU | DSP and FPU | DSP and FPU |
| RAM Memory | 256 KB | 256 KB | 384 KB | 256 KB | 256 KB | 256 KB |
| Special Feature | STM32F4 high-performance advanced line with 2 MB flash | Same STM32F439 family resource profile | Additional SRAM compared with STM32F439NIH6 | Lower flash capacity | Lower flash capacity | Lower flash capacity |
主な差別化要因
- Larger flash allocation than lower-memory STM32F4 alternatives (vs STM32F429NIH6)
- Larger SRAM than STM32F439NGH6 (vs STM32F439NGH6)
- High-performance processing at 180 MHz (vs STM32F437NIH6)
- 216-pin integration reduces external peripheral count (vs STM32F429NGH6)
設計ノート
Implement separate, low-impedance supply paths for the MCU's digital, analog, and power domains, with local bulk and high-frequency bypass capacitors placed close to their pins. Keep switching-regulator and high-current output paths away from sensitive analog inputs to limit conducted noise. Validate the power tree across 1.8 V, 2.5 V, and 3.3 V operating configurations because startup sequencing, current limits, and decoupling requirements can change with voltage.
Treat the 216-TFBGA as a concentrated heat source even though its 13 x 13 mm body provides substantial copper attachment area. Estimate worst-case junction temperature using the highest ambient temperature, core utilization, selected clock, and measured or calculated package dissipation. Provide uninterrupted ground-plane connectivity and consider thermal vias beneath exposed thermal lands while maintaining the manufacturer's assembly and land-pattern requirements.
Route high-frequency and high-current connections with short, direct paths, and place decoupling capacitors according to the datasheet pin table rather than at general locations near the connector. A 216-ball BGA also increases assembly complexity: confirm pad geometry, solder-mask definition, component placement clearances, and the manufacturer's recommended reflow profile before committing the PCB fabrication package.
Assign external interfaces and clocks according to the exact alternate-function and pin-mux tables in the manufacturer datasheet. Avoid routing sensitive analog, communications, and debug signals beneath noisy power-conversion stages, and maintain continuous ground references beneath signal paths. Any substitution using a related STM32F4 order code requires a new pin-by-pin and peripheral-equivalence review rather than a footprint-only check.
Do not assume that an STM32F4 device with the same package is a zero-change replacement. Flash size, SRAM, peripheral mix, pin multiplexing, temperature grade, and firmware startup requirements can differ across family members. Begin compatibility work with the manufacturer ordering-information and datasheet tables, then compile the existing firmware against the candidate device and verify all used peripherals on hardware before production release.
コンプライアンス情報
The verified manufacturer and distributor records do not explicitly state the requested compliance declarations. Obtain the current manufacturer product-information and compliance documents for the exact STM32F439NIH6 order code before using these fields in a regulated BOM.