STM32F439NIH6 - 180MHz Cortex-M4 MCU | STMicroelectronics
MPN: STM32F439NIH6 ✓ 啟用中STM32F439NIH6 概覽
A microcontroller is a programmable semiconductor integrated circuit containing a processor core, memory, peripherals, and communication interfaces. The STM32F4 family is positioned within the hierarchy of 32-bit Arm microcontrollers, embedded processors, and system-on-chip devices. It is designed for applications requiring considerably more computation than a basic 8-bit controller while retaining a compact package, deterministic peripheral access, and low-power operation.
The STM32F439NIH6 operates at up to 180 MHz and includes a single-precision floating-point unit and DSP instructions. Its 2 MB flash provides substantially more program storage than entry-level Cortex-M devices, while the manufacturer identifies the device as part of STMicroelectronics' high-performance advanced line. The 216-TFBGA arrangement exposes a large number of GPIO and peripheral connections while maintaining a 13 x 13 mm body size.
Typical applications include industrial automation controllers, motor-control systems, networked sensors, human-machine interfaces, audio processing, test and measurement equipment, and connected embedded products. The high clock rate supports responsive control loops and computationally intensive signal processing, while the large pin count enables simultaneous use of communications, display interfaces, analog functions, and digital I/O.
Design considerations center on power integrity, decoupling, thermal performance, and correct BGA assembly. Place the required input, output, and bypass capacitors adjacent to their associated supply pins, route high-current paths with minimal loop area, and use an assembly process suitable for a 216-TFBGA device. Review the manufacturer's datasheet for the complete pin list, exposed-pad requirements, and recommended land pattern before releasing the PCB design.
This page combines the exact STM32F439NIH6 ordering information with family-level engineering guidance, qualified same-brand alternatives, and design checks that help buyers evaluate package reuse, firmware impact, and supply continuity before requesting a quote.
直接替換替代品,適用於 STM32F439NIH6 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: STM32F439NIH6 (相同外形與佔位) — 差異在於 Package, Flash Memory, Operating Temperature, Core Architecture, Timers.
STM32F439NGH6
✅ 直接替換📋 參考替代品(不在目錄中)
STM32F469NIH6
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →STM32F429NIH6
✅ 直接替換 ⚠️ 規格未經驗證✓ 有庫存
$8.63 / 單位
查看資料表 →STM32F429NGH6
✅ 直接替換聯絡詢價
查看資料表 →STM32F437NIH6
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
STM32F439NIH6 最大額定值與電氣特性
| Product Type | 32-bit microcontroller |
| Manufacturer | STMicroelectronics |
| Processor Core | Arm Cortex-M4 |
| Architecture | 32-bit RISC |
| 最大時脈頻率 | 180 MHz |
| Flash Memory | 2 MB |
| Flash Organization | 2M x 8 bit |
| DSP Support | Yes |
| Floating-Point Unit | Single-precision FPU |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| 封裝 | 216-TFBGA, 13 x 13 mm |
| Total Pin Count | 216 pins |
| 安裝類型 | Surface mount |
STM32F439NIH6 216-tfbga, 13 x 13 mm 腳位配置指南
STM32F439NIH6(216-tfbga, 13 x 13 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM32F439NIH6.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM32F439NIH6 適用於 6 應用s: Industrial Automation Controller, Motor Control and Power Conversion, Graphical User Interface Controller, Networked Sensor and Edge Device, Audio and Digital Signal Processing, Test and Measurement Instrument.
Industrial Automation Controller
The STM32F439NIH6 fits industrial automation controllers that combine deterministic control with communications and a human-machine interface. Its Arm Cortex-M4 core operates at up to 180 MHz, providing headroom for control loops, protocol processing, and supervisory logic. The 2 MB flash accommodates larger application firmware than a 1 MB STM32F4 variant, while the 216-TFBGA package exposes numerous GPIO and peripheral functions. Designers should prioritize regulator stability, independent analog and digital supply filtering, and thermal review of the dense BGA layout.
推薦
Motor Control and Power Conversion
The STM32F439NIH6 is appropriate for digital motor control and power-conversion equipment requiring fast computation alongside extensive peripheral connectivity. Its 180 MHz Cortex-M4 core supports timing-intensive control software, DSP instructions accelerate signal calculations, and the single-precision FPU supports real-time numeric processing. The 216-TFBGA package provides a high pin count for gate-drive signals, feedback inputs, communications, and protection monitoring. Validation must confirm timer features, ADC performance, operating-temperature limits, and the voltage range used by the target motor-drive stage.
推薦
Graphical User Interface Controller
The STM32F439NIH6 can serve as the central controller in a compact graphical human-machine interface because its 180 MHz Cortex-M4 core handles interface updates alongside embedded application logic. The 2 MB flash provides additional code space for graphics routines, fonts, and communication services, while the 216-pin package offers ample connections for a display interface, touch input, buttons, and status indicators. The LCD controller, external-interface requirements, and memory bandwidth should be checked against the specific display architecture before schematic and PCB release.
推薦
Networked Sensor and Edge Device
The STM32F439NIH6 is well suited to networked sensing and edge-processing equipment where sensor conditioning, local computation, and communications must share one controller. The 180 MHz core can process local algorithms, while DSP and FPU support accelerates digital filtering and floating-point work. Its 2 MB flash supports embedded networking stacks and application code, and the 216-TFBGA pin count allows multiple serial interfaces, analog inputs, and status outputs. The power design should separately account for radio modules and sensors because their current demand is outside the MCU specification.
推薦
Audio and Digital Signal Processing
The STM32F439NIH6 applies to audio and digital signal-processing products that benefit from an FPU, DSP instructions, and a high-performance 32-bit core. At up to 180 MHz, the device can execute filtering, mixing, and control software concurrently with communication tasks. The 2 MB flash provides more room for signal-processing code than 1 MB STM32F4 alternatives, and the 216-TFBGA package supports multiple serial-audio, control, and debug connections. Actual signal-chain performance depends on the selected ADC, DAC, clocking scheme, and analog layout.
推薦
Test and Measurement Instrument
The STM32F439NIH6 is appropriate for compact test and measurement instruments requiring a balance of processing speed, storage, and I/O. The 180 MHz Arm Cortex-M4 core can manage instrument control, data acquisition, calibration, and communication, while the single-precision FPU assists numerical processing. Its 2 MB flash supports embedded firmware and instrument control code, and the 216-TFBGA package exposes numerous analog, digital, and serial pins. Measurement accuracy still depends on external references, analog front ends, shielding, calibration, and careful grounding.
推薦
推薦產品摘要
工程參考資料,適用於 STM32F439NIH6 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM32F439NGH6 | STM32F469NIH6 | STM32F429NIH6 | STM32F429NGH6 | STM32F437NIH6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 216-TFBGA (13 x 13 mm) | 216-TFBGA (13 x 13 mm) | 216-TFBGA (13 x 13 mm) | 216-TFBGA (13 x 13 mm) | 216-TFBGA (13 x 13 mm) | 216-TFBGA (13 x 13 mm) |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum Clock Frequency | 180 MHz | 180 MHz | 180 MHz | 180 MHz | 180 MHz | 180 MHz |
| Flash Memory | 2 MB | 2 MB | 2 MB | 1 MB | 1 MB | 1 MB |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| DSP and FPU Support | DSP and single-precision FPU | DSP and FPU | DSP and FPU | DSP and FPU | DSP and FPU | DSP and FPU |
| RAM Memory | 256 KB | 256 KB | 384 KB | 256 KB | 256 KB | 256 KB |
| Special Feature | STM32F4 high-performance advanced line with 2 MB flash | Same STM32F439 family resource profile | Additional SRAM compared with STM32F439NIH6 | Lower flash capacity | Lower flash capacity | Lower flash capacity |
主要差異化特點
- Larger flash allocation than lower-memory STM32F4 alternatives (對比STM32F429NIH6)
- Larger SRAM than STM32F439NGH6 (對比STM32F439NGH6)
- High-performance processing at 180 MHz (對比STM32F437NIH6)
- 216-pin integration reduces external peripheral count (對比STM32F429NGH6)
設計說明
Implement separate, low-impedance supply paths for the MCU's digital, analog, and power domains, with local bulk and high-frequency bypass capacitors placed close to their pins. Keep switching-regulator and high-current output paths away from sensitive analog inputs to limit conducted noise. Validate the power tree across 1.8 V, 2.5 V, and 3.3 V operating configurations because startup sequencing, current limits, and decoupling requirements can change with voltage.
Treat the 216-TFBGA as a concentrated heat source even though its 13 x 13 mm body provides substantial copper attachment area. Estimate worst-case junction temperature using the highest ambient temperature, core utilization, selected clock, and measured or calculated package dissipation. Provide uninterrupted ground-plane connectivity and consider thermal vias beneath exposed thermal lands while maintaining the manufacturer's assembly and land-pattern requirements.
Route high-frequency and high-current connections with short, direct paths, and place decoupling capacitors according to the datasheet pin table rather than at general locations near the connector. A 216-ball BGA also increases assembly complexity: confirm pad geometry, solder-mask definition, component placement clearances, and the manufacturer's recommended reflow profile before committing the PCB fabrication package.
Assign external interfaces and clocks according to the exact alternate-function and pin-mux tables in the manufacturer datasheet. Avoid routing sensitive analog, communications, and debug signals beneath noisy power-conversion stages, and maintain continuous ground references beneath signal paths. Any substitution using a related STM32F4 order code requires a new pin-by-pin and peripheral-equivalence review rather than a footprint-only check.
Do not assume that an STM32F4 device with the same package is a zero-change replacement. Flash size, SRAM, peripheral mix, pin multiplexing, temperature grade, and firmware startup requirements can differ across family members. Begin compatibility work with the manufacturer ordering-information and datasheet tables, then compile the existing firmware against the candidate device and verify all used peripherals on hardware before production release.
合規資訊
The verified manufacturer and distributor records do not explicitly state the requested compliance declarations. Obtain the current manufacturer product-information and compliance documents for the exact STM32F439NIH6 order code before using these fields in a regulated BOM.