STM32F439ZGT6 - 180MHz Cortex-M4 1MB MCU | STMicroelectronics
部品番号: STM32F439ZGT6 ✓ 生産中STM32F439ZGT6 概要
A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, and peripherals into one device. The STM32F4 family belongs to the broader Arm Cortex-M microcontroller hierarchy and combines real-time control capability with extensive serial communications, analog, timer, and digital interfaces. This makes the STM32F439ZGT6 suitable for systems that need substantial processing performance without using a higher-complexity application processor.
Key features include an Arm Cortex-M4 processor with hardware floating-point capability, a maximum clock frequency of 180 MHz, and 1 MB of Flash for firmware storage. Its 144-LQFP package provides a large pin count for exposure of GPIO, communication, power, clock, and debugging functions. The 20 x 20 mm package is readily routed on standard multilayer PCB technology and offers generous copper connectivity around the device.
The STM32F4 architecture supports a broad collection of embedded peripherals, including general-purpose timers, serial interfaces, and memory-management functions. Performance requirements should be checked against the exact peripheral configuration required by the application because package pins and peripheral instances vary within the STM32F4 family. Firmware, bootloader, and peripheral configuration should also be reviewed before replacing a part from another STM32 series.
Typical uses include industrial automation controllers, networked measurement equipment, audio-processing systems, motor-control platforms, human-interface controllers, and communications gateways. In these applications, the 180 MHz Cortex-M4 core can execute control logic while dedicated timers and serial peripherals manage deterministic input and output tasks. A companion transceiver or interface IC may still be required when the system must connect to Ethernet, RS-232, USB, or another physical network.
PCB design should preserve the device power and decoupling layout, especially for the 2.5 V and 3.3 V operating options identified in the product listing. Place local bypass capacitors at supply pins, route high-speed signals over continuous reference planes, and follow the manufacturer pin-description table when assigning all 144 pins. Confirm oscillator, reset, boot, debug, and exposed-thermal-pad requirements against the complete manufacturer documentation before fabrication.
This product record combines the exact manufacturer and distributor identity, core memory and processor specifications, package dimensions, sourcing information, engineering applications, and practical design guidance. It also distinguishes same-family STM32 options from a confirmed cross-brand replacement, helping engineers make a compatibility decision without assuming that similar performance automatically guarantees a drop-in PCB substitution.
ドロップイン代替品: STM32F439ZGT6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32F439ZGT6 （同一形状・フットプリント） — 相違点: Package, Maximum Clock Frequency, ADC, Communication Interfaces, Performance.
STM32F407ZGT6
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$5.25 / 個
データシートを見る →STM32F429ZGT6
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →STM32F427ZGT6
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →STM32F446ZGT6
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
STM32F413ZGT6
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →STM32F439ZGT6 最大定格＆電気的特性
| Manufacturer | STMicroelectronics |
| Product Type | 32-bit microcontroller |
| Processor Core | Arm Cortex-M4 |
| Architecture | 32-bit RISC |
| 最大クロック周波数 | 180 MHz |
| Embedded Flash Memory | 1 MB (1M x 8) |
| Supply Voltage Options | 2.5 V or 3.3 V |
| Package Type | 144-LQFP |
| Package Body Size | 20 mm x 20 mm |
| ピン数 | 144 pins |
| 実装タイプ | Surface mount |
| Shipping Format | Tray |
STM32F439ZGT6 20 mm x 20 mm ピン配置ガイド
STM32F439ZGT6 (20 mm x 20 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32F439ZGT6.
詳細は データシート をご参照ください。
主な用途
STM32F439ZGT6 の用途: 6 件s: Industrial Automation Controller, Ethernet-Connected Control System, Audio Processing and Interface, Motor Control and Positioning, Communications Gateway, USB Hub and Peripheral Controller.
Industrial Automation Controller
The STM32F439ZGT6 fits an industrial automation controller because its Arm Cortex-M4 core operates up to 180 MHz while the 144-LQFP package exposes numerous digital and peripheral pins. It can divide execution among deterministic control loops, communications, diagnostics, and data acquisition. The 1 MB Flash capacity provides room for application firmware, drivers, and configuration data. Before layout release, verify the required timer channels, communication interfaces, analog inputs, isolation boundaries, and operating-temperature limits against the manufacturer datasheet.
おすすめ
Ethernet-Connected Control System
The STM32F439ZGT6 is appropriate for an Ethernet-connected control system requiring a 180 MHz control processor and a large 144-pin package. Its control tasks can run alongside network services, status monitoring, and local data processing. When a dedicated Ethernet PHY is required, the KSZ8721 can complement the MCU with physical-layer connectivity. Keep the Ethernet clock, differential routing, magnetics, and PHY power supply on a controlled signal path, and confirm the exact integrated Ethernet resources and pin assignments in the manufacturer documentation.
おすすめ
Audio Processing and Interface
The STM32F439ZGT6 can serve as the central processor in a real-time audio system because the 180 MHz Cortex-M4 core provides more computational headroom than many lower-frequency embedded controllers. Its 1 MB Flash supports substantial firmware, while the 144-pin package offers a broad selection of signal-routing options. The STM32F4 timer and DMA resources can support digital audio transport and deterministic signal handling. Exact DAC, I2S, SAI, or PDM availability must be checked in the datasheet, and analog output paths may require an external amplifier such as the TLV271.
おすすめ
Motor Control and Positioning
The STM32F439ZGT6 is well suited to motor-control and positioning systems that combine fast control computation with multiple digital feedback functions. The 180 MHz Cortex-M4 core supports control algorithms, state management, and communication, while the LQFP package offers a high pin count for encoders, position sensors, motor drivers, and protection signals. PWM capability, advanced timer channels, ADC trigger behavior, and DMA routing must be verified for the exact STM32F439 device. The design should also include appropriate isolation, current sensing, fault shutdown, and thermal protection.
おすすめ
Communications Gateway
The STM32F439ZGT6 can serve as the protocol-processing engine in a communications gateway where the 180 MHz Cortex-M4 core, 1 MB Flash, and numerous I/O resources provide ample integration capacity. It can manage serial protocols, buffering, routing logic, configuration, and local diagnostics across several external interfaces. Because the MCU does not provide every physical-layer function by itself, RS-232 or CAN links may require companion transceivers such as the SP3232 or L9638. Validate protocol timing, interrupt load, buffer requirements, and pin multiplexing before final firmware allocation.
おすすめ
USB Hub and Peripheral Controller
The STM32F439ZGT6 is suitable for a multi-interface USB peripheral controller because it combines real-time processing with a broad peripheral set and a high pin count. A system can use the MCU for device management, configuration, monitoring, and data buffering while external hub or transceiver devices manage physical USB connectivity. The USB2514 can serve as a hub controller when the architecture requires multiple downstream ports. Review USB clock requirements, transceiver support, power detection, over-current handling, and the exact alternate-function pins before committing the PCB layout.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32F439ZGT6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32F407ZGT6 | STM32F429ZGT6 | STM32F427ZGT6 | STM32F446ZGT6 | STM32F413ZGT6 |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum Clock Frequency | 180 MHz | 168 MHz | 180 MHz | 180 MHz | 180 MHz | 100 MHz |
| Embedded Flash Memory | 1 MB (1M x 8) | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| Word Size | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
| Firmware and Driver Validation | Required for production release | Required | Required | Required | Required | Required |
主な差別化要因
- Higher maximum clock than the STM32F407 family option （vs STM32F407ZGT6)
- Higher maximum clock than the STM32F413 family option （vs STM32F413ZGT6)
- Large 144-pin package supports extensive external connectivity （vs STM32F413ZGT6)
設計ノート
Use the manufacturer pin-description table to assign all 144 LQFP pins and preserve the exposed pad connection exactly as specified. Place the recommended local bypass capacitors adjacent to the associated supply pins, with short current loops and a low-impedance ground path. Route the 20 x 20 mm device on a multilayer board with adequate thermal copper, and check land-pattern dimensions against the official package drawing rather than scaling it from a generic LQFP footprint.
The 180 MHz operating point requires a carefully planned clock and power-delivery network. Use the manufacturer’s supported oscillator and PLL configuration, keep sensitive clock traces short, and return their ground references continuously. Validate startup, reset, and clock-stability behavior across the full supply range. Timing margin should be checked with the actual compiler, optimization level, peripheral clock configuration, and worst-case operating conditions.
Do not assume that two STM32F4 devices with the same 144-LQFP package are interchangeable merely because their pin counts match. Compare each used pin’s power, ground, alternate function, interrupt capability, and analog function; then check timer channels, DMA requests, Ethernet, USB, and memory features. A firmware-porting effort may be required even when the physical footprint remains unchanged.
Estimate junction temperature from total device dissipation, package thermal resistance, and the PCB copper area. Use the manufacturer’s thermal model for the selected 144-LQFP package and board construction rather than relying on a generic thermal-resistance value. Keep high-current and switching circuitry away from sensitive analog routes, and provide continuous ground-plane copper beneath the device where the package design permits.
コンプライアンス情報
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement appears in the part-level records. The product also does not carry an automotive qualification designation in its order code.