STM32G031C8U6 - 64MHz 64KB Cortex-M0+ MCU | STMicroelectronics
部品番号: STM32G031C8U6 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $7.7739 | $7.77 |
| 10 | $7.7739 | $77.74 |
| 100 | $7.7739 | $777.39 |
| 500 | $7.7739 | $3,886.95 |
| 1,000 | $7.7739 | $7,773.90 |
STM32G031C8U6 概要
A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and interfaces into one package. The STM32G031C8U6 uses the Arm Cortex-M0+ core, an efficient 32-bit architecture intended for embedded control. Its 64 MHz operating frequency provides headroom for responsive control loops and connected embedded products while retaining a simple instruction set and low system complexity.
Verified product information identifies the device as a 32-bit Cortex-M0+ MCU with 64 KB Flash and a 48-UFQFPN package. The STM32G031x4, STM32G031x6, and STM32G031x8 devices are described by STMicroelectronics as mainstream products based on the high-performance Arm Cortex-M0+ core. The supplied data does not specify RAM size, operating voltage, GPIO count, temperature range, or individual peripheral ratings; those values should be confirmed in the manufacturer datasheet before design release.
Typical uses for this device class include compact industrial control modules, sensor interfaces, compact motor-control boards, communication equipment, and low-power embedded control products. The 48-pin package offers more I/O capability than smaller MCU packages, which can simplify board routing when a design needs multiple external signals. The 64 MHz core is also appropriate for applications that combine control logic with moderate protocol or data-processing work.
For PCB design, the 7 x 7 mm UFQFPN footprint requires careful land-pattern and thermal-pad design. Use the manufacturer package drawing and pinout rather than inferring connections from the distributor description. Confirm exposed-pad treatment, power decoupling, oscillator connections, and programming access against the official STM32G031C8 documentation.
This product page consolidates the verified manufacturer and distributor information, package details, procurement links, and engineering-oriented design guidance for STM32G031C8U6. It does not substitute for the complete electrical, timing, environmental, or pin-level specifications in the STMicroelectronics datasheet.
ドロップイン代替品: STM32G031C8U6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32G031C8U6 （同一形状・フットプリント） — 相違点: Package, Communication Interfaces, Core, Timers, Flash Memory.
クイック比較ツール — 並列比較する代替部品を選択:
STM32G061C8U6
✅ ドロップイン📋 参考代替品（カタログ未掲載）
STM32G041C8U6
✅ ドロップイン📋 参考代替品（カタログ未掲載）
STM32G031G8U6
✅ ドロップイン✓ 在庫あり
$1.38 / 個
データシートを見る →STM32F030C8T6TR
✅ ドロップイン✓ 在庫あり
$0.98 / 個
データシートを見る →STM32F030C6T6TR
✅ ドロップイン✓ 在庫あり
$0.407 / 個
データシートを見る →STM32G031C8U6 最大定格＆電気的特性
| Core | Arm Cortex-M0+ 32-bit RISC |
| Maximum CPU Frequency | 64 MHz |
| Flash Memory | 64 KB |
| Program Memory Organization | 64K x 8 |
| Device Family | STM32G0 Series |
| Product Group | STM32G031x4/x6/x8 mainstream microcontrollers |
| Architecture | 32-bit RISC |
| パッケージ | 48-UFQFPN 7 x 7 mm |
| Package Type | UFQFPN |
| 実装タイプ | Surface Mount |
| Supplier Category | Microcontrollers |
| RoHS ステータス | unknown |
| REACH Status | unknown |
STM32G031C8U6 ufqfpn ピン配置ガイド
STM32G031C8U6 (ufqfpn パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32G031C8U6.
詳細は データシート をご参照ください。
主な用途
STM32G031C8U6 の用途: 6 件s: Compact Industrial Control Module, Sensor and Measurement Node, Low-Power Embedded Device, Compact Communication Controller, Compact Motor and Actuator Controller, User Interface and HMI Controller.
Compact Industrial Control Module
The STM32G031C8U6 fits compact control modules that combine a 64 MHz Cortex-M0+ processor with a 48-pin surface-mount package. Its 32-bit RISC core can execute sequencing, state-machine, and supervisory logic while the MCU handles sensor inputs and actuator outputs. The 7 x 7 mm UFQFPN footprint helps reduce board area compared with larger through-hole or high-lead-count packages. Before finalizing the design, verify the required GPIO count, ADC resources, communication interfaces, supply range, and temperature limits in the manufacturer datasheet.
おすすめ
Sensor and Measurement Node
STM32G031C8U6 can serve as the central controller in a small measurement node that gathers digital or analog sensor information and presents results through a serial interface. The 64 MHz Cortex-M0+ core provides useful processing headroom for filtering, calibration, and communication framing, while the 48-pin package offers more physical connection options than a small-pin-count MCU. The supplied data does not confirm ADC resolution or analog peripheral details, so analog-dependent designs must verify those functions and electrical limits from the official documentation.
おすすめ
Low-Power Embedded Device
The STM32G031C8U6 is appropriate for compact embedded products where an efficient 32-bit core, modest 64 KB Flash capacity, and surface-mount integration are more useful than a high-pin-count application processor. A low-power design can use the MCU for wake-up handling, sensor polling, local control, and periodic communication while preserving a small board footprint. Exact low-power modes, wake-up sources, current consumption, and supply requirements are not included in the verified data and must be checked in the manufacturer datasheet.
おすすめ
Compact Communication Controller
STM32G031C8U6 can be evaluated for compact communication controllers that need a responsive Cortex-M0+ core and integrated embedded resources. At up to 64 MHz, the processor can manage protocol state machines, framing, buffer movement, and supervisory functions, while the 48-pin package provides a practical route to external interfaces and connectors. The verified information does not enumerate UART, SPI, I2C, USB, or CAN resources, so the selected protocol interface, pin multiplexing, electrical levels, and timing must be verified before design commitment.
おすすめ
Compact Motor and Actuator Controller
The STM32G031C8U6 may be used in compact actuator-control boards where a 32-bit control loop, external sensing, and multiple digital connections are required. Its 64 MHz maximum frequency provides a responsive foundation for motor sequencing, position or limit sensing, fault handling, and communication with a higher-level controller. The verified data does not specify timer channels, PWM outputs, encoder interfaces, or electrical ratings, so motor-control suitability depends on those resources and on the chosen driver interface being confirmed in the manufacturer documentation.
おすすめ
User Interface and HMI Controller
STM32G031C8U6 can support a compact human-machine interface controller when the design needs local keypad scanning, display updates, status LEDs, and serial configuration. The 32-bit Cortex-M0+ architecture is suitable for event handling and fixed UI tasks, and the 48-pin package provides a larger external I/O surface than very small MCU packages. Display timing, touch-controller interfaces, GPIO availability, and low-power behavior are not specified in the supplied verified data and should be checked against the actual peripheral map and package pinout.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32G031C8U6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32G061C8U6 | STM32G041C8U6 | STM32G031G8U6 | STM32F030C8T6TR | STM32F030C6T6TR |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 48-UFQFPN 7 x 7 mm | 48-UFQFPN 7 x 7 mm | 48-UFQFPN 7 x 7 mm | 48-UFQFPN 7 x 7 mm | 48-LQFP | 48-LQFP |
| CPU Core | Arm Cortex-M0+ 32-bit RISC | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
主な差別化要因
- Mainstream STM32G0 positioning （vs STM32F030C8T6TR)
- Verified maximum frequency （vs STM32F030C8T6TR)
- Compact package format （vs STM32F030C8T6TR)
- Same-family replacement path （vs STM32G061C8U6)
設計ノート
Use the official STM32G031C8 package drawing and land pattern for the 48-UFQFPN 7 x 7 mm device. Place decoupling capacitors close to the device power pins and route power and ground connections with low loop area. Confirm the exposed-pad electrical requirements and PCB thermal design before fabrication, because the verified distributor snippet identifies the UFQFPN package but does not provide the manufacturer land-pattern drawing.
The supplied data confirms a 64 MHz Cortex-M0+ core and 64 KB Flash but does not specify supply voltage or current limits. Do not select regulator rails, bulk capacitance, or power-sequencing components from the distributor description alone. Obtain the complete electrical characteristics, including operating voltage, current consumption, reset behavior, and clock requirements, from STMicroelectronics before schematic release.
Do not treat STM32G0 family similarity as proof of drop-in compatibility. Verify the exact package dimensions, pin numbering, exposed-pad connection, alternate-function mapping, peripheral availability, memory map, and device identification in the manufacturer documentation. The cross-reference data names related parts but does not provide a complete substitution matrix.
Keep sensitive analog, oscillator, programming, and communication routes away from noisy switching paths when those functions are used. Follow the manufacturer's recommended clock and debug layout practices, provide a reliable ground reference, and reserve test points for programming and boundary testing. The exact layout requirements depend on the selected pins and peripherals, which are not specified in the supplied verified data.
コンプライアンス情報
The supplied verified web results do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for STM32G031C8U6. These statuses remain unknown and must be confirmed from STMicroelectronics or an authorized compliance source.
