STM32L021D4P6 - 32MHz Cortex-M0+ 16KB MCU | STMicroelectronics
部品番号: STM32L021D4P6 ✓ 生産中STM32L021D4P6 概要
An ultra-low-power microcontroller is a semiconductor designed to minimize energy consumption while executing control tasks. It combines a microcontroller unit, embedded nonvolatile Flash, SRAM, clocking, reset, and communication peripherals in one compact device. The STM32L021x4 access-line family occupies the MCU hierarchy as a 32-bit embedded controller, combining real-time processing with low-power standby and stop modes for battery-operated equipment.
The device reaches 76 uA/MHz in Run mode according to the manufacturer datasheet, while operating temperature extends from -40 C to +125 C. Standby consumption reaches 0.23 uA with two wakeup pins, and Stop mode reaches 0.29 uA with 16 wakeup lines. A configuration retaining RTC operation and 2 KB of RAM in Stop mode consumes 0.54 uA. Flash-backed wakeup from Stop mode takes 5 us.
The Cortex-M0+ processor supports a compact instruction set suited to control, monitoring, and communications tasks. The STM32L021D4P6 also includes AES hardware capability, as identified in the manufacturer and distributor product descriptions. Because the device is based on the Arm Cortex-M0+ architecture, firmware can use the standard Cortex-M exception model and a broad ecosystem of embedded development tools, while the exact peripheral assignment and alternate-function availability must be checked in the pin-description table.
Typical applications include low-power sensor nodes, compact industrial controls, battery-powered instruments, connected maintenance equipment, and always-on monitoring modules. The combination of 32 MHz processing, 16 KB Flash, 2 KB RAM, and sub-microamp stop-mode current supports designs that need responsive control without continuously operating the processor.
PCB design should preserve access to all 14 package pins, route debug and programming signals away from noisy analog or switching nodes, and place decoupling capacitors close to the supply pins. Because this is a compact MCU, pin multiplexing and package escape routing deserve early review; confirm each peripheral function against the manufacturer pinout before finalizing the board layout.
This page consolidates the core operating characteristics, package details, practical application guidance, and verified substitute information into one engineering-focused reference. It also distinguishes a confirmed same-package alternative from options that may match electrically but require different footprints or packages.
ドロップイン代替品: STM32L021D4P6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32L021D4P6 (同一形状・フットプリント) — 相違点: Flash Memory, Package, Operating Temperature Range, SRAM, Stop Mode Current.
STM32L011D4P6
✅ ドロップイン価格はお問い合わせください
データシートを見る →STM32L021D4P6 最大定格&電気的特性
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 16 KB (16K x 8) |
| SRAM | 2 KB |
| 動作電源電圧 | 1.65 V to 3.6 V |
| Run Mode Current | 76 uA/MHz |
| Standby Mode Current | 0.23 uA with 2 wakeup pins |
| Stop Mode Current | 0.29 uA with 16 wakeup lines |
| Stop Plus RTC and RAM Retention Current | 0.54 uA with RTC and 2 KB RAM retention |
| Wakeup Time from Flash | 5 us |
| 動作温度範囲 | -40 C to +125 C |
| パッケージ | 14-pin TSSOP |
| 実装タイプ | Surface mount |
| Hardware Encryption | AES |
STM32L021D4P6 14-pin tssop ピン配置ガイド
STM32L021D4P6 (14-pin tssop パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32L021D4P6.
詳細は データシート をご参照ください。
主な用途
STM32L021D4P6 の用途: 6 件s: Battery-Powered Sensor Node, Compact Industrial Control Module, Battery-Powered Portable Instrument, Always-On Monitoring Device, Low-Power Data Acquisition Unit, Smart Maintenance Device.
Battery-Powered Sensor Node
The STM32L021D4P6 fits battery-powered sensor nodes because it combines a 32 MHz Arm Cortex-M0+ core with a 0.29 uA Stop-mode current and a 5 us wakeup time from Flash. A typical design samples a sensor, evaluates the reading, and returns to a low-power state between events. The 16 KB Flash and 2 KB SRAM provide enough space for compact acquisition, filtering, and communication-control firmware without requiring a larger package. Its 1.65 V to 3.6 V operating range also supports low-voltage rails, although the engineer must verify that the sensor, pull networks, and communication hardware operate at the same voltage.
Compact Industrial Control Module
The STM32L021D4P6 is useful in compact industrial control modules that monitor digital inputs and manage actuators or indicators while limiting standby consumption. Its 32 MHz Cortex-M0+ processor can execute deterministic control logic, while 16 KB of Flash accommodates a small application and 2 KB of SRAM supports buffering and state variables. The -40 C to +125 C temperature range covers demanding industrial environments, but system-level requirements still govern final suitability. Designers should reserve clean grounding and decoupling for the MCU, isolate noisy switching paths, and validate timing behavior at the lowest intended supply voltage and highest clock frequency.
Battery-Powered Portable Instrument
The STM32L021D4P6 supports portable instruments that periodically record a measurement and remain available through a low-power state. The processor’s 32 MHz operating speed supports responsive sampling and local computation, while the 0.23 uA Standby current and 0.54 uA Stop-plus-RTC configuration help reduce energy use between measurement intervals. The 2 KB retained RAM option in Stop mode can preserve selected state across sleep periods. The 14-pin TSSOP footprint supports compact layouts, but pin multiplexing limits external connectivity, so engineers should map the display, sensor, and power-control interfaces before committing to the package.
Always-On Monitoring Device
The STM32L021D4P6 is appropriate for always-on monitoring devices that must distinguish routine activity from infrequent events without leaving the main processor active continuously. Its Stop mode supports 16 wakeup lines, and the 5 us Flash wakeup time permits rapid response after an interrupt. The 32 MHz Cortex-M0+ core can evaluate alarm thresholds, update a counter, and control a communications interval. Low-power operation should be validated with realistic peripheral leakage because the MCU figures do not include the entire board load. Pull resistors, sensors, transceivers, and indicator drivers may dominate current consumption between wake events.
Low-Power Data Acquisition Unit
The STM32L021D4P6 can serve as the control element in a small low-power data-acquisition unit that gathers sensor information in bursts. Its 32 MHz Arm Cortex-M0+ core provides enough throughput for sampling and basic signal processing, while 16 KB of Flash and 2 KB of SRAM fit a focused embedded application. The 1.65 V minimum supply supports compatibility with 1.8 V systems, and the 5 us wakeup time allows rapid duty-cycled acquisition. Input protection, analog conditioning, and accuracy are system-level concerns outside the MCU. Place the device away from high-current switching paths and use the pin-description table to select the required peripheral mapping.
Smart Maintenance Device
The STM32L021D4P6 fits smart maintenance devices that record operating events, count equipment cycles, or activate a local indicator without needing a high-power processor. Its 0.29 uA Stop current supports long standby intervals, and the 32 MHz core can handle debouncing, event processing, and data buffering. The 2 KB SRAM is suitable for modest buffering, while 16 KB of Flash supports a compact application. In installations with motors, relays, or long cable runs, the MCU supply must be isolated from transients and ground currents. Validate wake sources, watchdog behavior, and recovery after brownout conditions to ensure the monitoring function remains dependable.
エンジニアリング参考データ: STM32L021D4P6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32L011D4P6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 14-pin TSSOP | 14-pin TSSOP |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Flash Memory | 16 KB | 16 KB |
主な差別化要因
- Exact STM32L021x4 family configuration (vs STM32L011D4P6)
- Fast low-power wakeup (vs STM32L011D4P6)
- Compact low-power feature set (vs STM32L011D4P6)
設計ノート
Place the MCU decoupling capacitor at the supply pin with the shortest possible trace, and provide a compact return path to the associated ground pin. The 14-pin TSSOP footprint has limited escape space, so assign pins according to the manufacturer alternate-function table before routing. Keep programming, reset, and debug nets accessible for production test while maintaining separation from switching nodes.
Design the power tree around the device's 1.65 V to 3.6 V operating range and evaluate brownout behavior at the minimum rail voltage. A 32 MHz operating condition requires sufficient decoupling and a supply capable of supporting the relevant current transient. For battery products, include peripheral leakage and board-level sleep current in the energy budget because the MCU specifications alone do not represent total system consumption.
Do not assume that a 14-pin Cortex-M0+ MCU offers every peripheral function on every pin. Review alternate-function mapping, debug access, clock pins, and wakeup-capable inputs in the manufacturer pin-description table. When considering the STM32L011D4P6 as a substitute, also verify peripheral differences and firmware behavior rather than relying on package dimensions alone.
Use a quiet ground reference beneath the MCU and route high-current return paths away from sensitive inputs. If the controller sits beside relays, motor drivers, or switching supplies, constrain the switching current loop and place bulk energy storage near the noise source. Keep antenna and communication sections separated from the supply-return path where practical to reduce radiated and conducted coupling into the control circuit.
コンプライアンス情報
Compliance declarations were not identified in the available product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from the manufacturer documentation for the ordered device.