STMicroelectronics

STM32L021D4P6 - 32MHz Cortex-M0+ 16KB MCU | STMicroelectronics

MPN: STM32L021D4P6 ✓ Nakahanda
1.65 V to 3.6 V Vdss 76 uA/MHz Id 14-pin TSSOP Package 32 MHz Speed 16 KB (16K x 8) Memory
MOQ: 1 |

STM32L021D4P6 Ulas

STMicroelectronics STM32L021D4P6 is an ultra-low-power 32-bit microcontroller with an Arm Cortex-M0+ core operating at 32 MHz, 16 KB of embedded Flash, and 2 KB of SRAM in a 14-pin TSSOP package. Its 1.65 V to 3.6 V operating supply supports both energy-efficient embedded systems and low-voltage sensor or control products.

An ultra-low-power microcontroller is a semiconductor designed to minimize energy consumption while executing control tasks. It combines a microcontroller unit, embedded nonvolatile Flash, SRAM, clocking, reset, and communication peripherals in one compact device. The STM32L021x4 access-line family occupies the MCU hierarchy as a 32-bit embedded controller, combining real-time processing with low-power standby and stop modes for battery-operated equipment.

The device reaches 76 uA/MHz in Run mode according to the manufacturer datasheet, while operating temperature extends from -40 C to +125 C. Standby consumption reaches 0.23 uA with two wakeup pins, and Stop mode reaches 0.29 uA with 16 wakeup lines. A configuration retaining RTC operation and 2 KB of RAM in Stop mode consumes 0.54 uA. Flash-backed wakeup from Stop mode takes 5 us.

The Cortex-M0+ processor supports a compact instruction set suited to control, monitoring, and communications tasks. The STM32L021D4P6 also includes AES hardware capability, as identified in the manufacturer and distributor product descriptions. Because the device is based on the Arm Cortex-M0+ architecture, firmware can use the standard Cortex-M exception model and a broad ecosystem of embedded development tools, while the exact peripheral assignment and alternate-function availability must be checked in the pin-description table.

Typical applications include low-power sensor nodes, compact industrial controls, battery-powered instruments, connected maintenance equipment, and always-on monitoring modules. The combination of 32 MHz processing, 16 KB Flash, 2 KB RAM, and sub-microamp stop-mode current supports designs that need responsive control without continuously operating the processor.

PCB design should preserve access to all 14 package pins, route debug and programming signals away from noisy analog or switching nodes, and place decoupling capacitors close to the supply pins. Because this is a compact MCU, pin multiplexing and package escape routing deserve early review; confirm each peripheral function against the manufacturer pinout before finalizing the board layout.

This page consolidates the core operating characteristics, package details, practical application guidance, and verified substitute information into one engineering-focused reference. It also distinguishes a confirmed same-package alternative from options that may match electrically but require different footprints or packages.

Mga alternatibo na pwedeng ilagay na STM32L021D4P6 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok STM32L021D4P6 (parehas na form factor at footprint) — pagkakaiba sa Flash Memory, Package, Operating Temperature Range, SRAM, Stop Mode Current.

STMicroelectronics
Flash Memory: 8 KB (8K x 8)
Package: 14-TSSOP
Ikabit sa STM32L021D4P6 →
STMicroelectronics
Flash Memory: 16 KB
Package: TSSOP-14
Operating Temperature Range: -40°C to +125°C
Ikabit sa STM32L021D4P6 →

STM32L011D4P6

✅ Drop-In
STMicroelectronics
📦 14-pin TSSOP
32-bit ultra-low-power microcontroller · Arm Cortex-M0+ · 32 MHz · 16 KB (16K x 8) · 16K x 8 bits · 14-pin TSSOP · 14 pins · 12 GPIO pins

Magkontak para sa presyo

Tingnan ang Datasheet →

STM32L021D4P6 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 32-bit ultra-low-power microcontroller
Processor Core Arm Cortex-M0+
Maximum CPU Frequency 32 MHz
Architecture 32-bit RISC
Flash Memory 16 KB (16K x 8)
SRAM 2 KB
Supply Voltage na Operasyon 1.65 V to 3.6 V
Run Mode Current 76 uA/MHz
Standby Mode Current 0.23 uA with 2 wakeup pins
Stop Mode Current 0.29 uA with 16 wakeup lines
Stop Plus RTC and RAM Retention Current 0.54 uA with RTC and 2 KB RAM retention
Wakeup Time from Flash 5 us
Hanay ng Temperature na Operasyon -40 C to +125 C
Packhaging 14-pin TSSOP
Uri ng Pagpapasok Surface mount
Hardware Encryption AES

Gabay sa Pin Configuration ng STM32L021D4P6 14-pin tssop

Pin configuration para sa STM32L021D4P6 (14-pin tssop package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 14-pin tssop package para sa STM32L021D4P6

Wala ng detalyadong pinout data na magagamit para sa STM32L021D4P6.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

STM32L021D4P6 ay nararapat para sa 6 aplikasyons: Battery-Powered Sensor Node, Compact Industrial Control Module, Battery-Powered Portable Instrument, Always-On Monitoring Device, Low-Power Data Acquisition Unit, Smart Maintenance Device.

🧩

Battery-Powered Sensor Node

The STM32L021D4P6 fits battery-powered sensor nodes because it combines a 32 MHz Arm Cortex-M0+ core with a 0.29 uA Stop-mode current and a 5 us wakeup time from Flash. A typical design samples a sensor, evaluates the reading, and returns to a low-power state between events. The 16 KB Flash and 2 KB SRAM provide enough space for compact acquisition, filtering, and communication-control firmware without requiring a larger package. Its 1.65 V to 3.6 V operating range also supports low-voltage rails, although the engineer must verify that the sensor, pull networks, and communication hardware operate at the same voltage.

🏭

Compact Industrial Control Module

The STM32L021D4P6 is useful in compact industrial control modules that monitor digital inputs and manage actuators or indicators while limiting standby consumption. Its 32 MHz Cortex-M0+ processor can execute deterministic control logic, while 16 KB of Flash accommodates a small application and 2 KB of SRAM supports buffering and state variables. The -40 C to +125 C temperature range covers demanding industrial environments, but system-level requirements still govern final suitability. Designers should reserve clean grounding and decoupling for the MCU, isolate noisy switching paths, and validate timing behavior at the lowest intended supply voltage and highest clock frequency.

📱

Battery-Powered Portable Instrument

The STM32L021D4P6 supports portable instruments that periodically record a measurement and remain available through a low-power state. The processor’s 32 MHz operating speed supports responsive sampling and local computation, while the 0.23 uA Standby current and 0.54 uA Stop-plus-RTC configuration help reduce energy use between measurement intervals. The 2 KB retained RAM option in Stop mode can preserve selected state across sleep periods. The 14-pin TSSOP footprint supports compact layouts, but pin multiplexing limits external connectivity, so engineers should map the display, sensor, and power-control interfaces before committing to the package.

📡

Always-On Monitoring Device

The STM32L021D4P6 is appropriate for always-on monitoring devices that must distinguish routine activity from infrequent events without leaving the main processor active continuously. Its Stop mode supports 16 wakeup lines, and the 5 us Flash wakeup time permits rapid response after an interrupt. The 32 MHz Cortex-M0+ core can evaluate alarm thresholds, update a counter, and control a communications interval. Low-power operation should be validated with realistic peripheral leakage because the MCU figures do not include the entire board load. Pull resistors, sensors, transceivers, and indicator drivers may dominate current consumption between wake events.

🔧

Low-Power Data Acquisition Unit

The STM32L021D4P6 can serve as the control element in a small low-power data-acquisition unit that gathers sensor information in bursts. Its 32 MHz Arm Cortex-M0+ core provides enough throughput for sampling and basic signal processing, while 16 KB of Flash and 2 KB of SRAM fit a focused embedded application. The 1.65 V minimum supply supports compatibility with 1.8 V systems, and the 5 us wakeup time allows rapid duty-cycled acquisition. Input protection, analog conditioning, and accuracy are system-level concerns outside the MCU. Place the device away from high-current switching paths and use the pin-description table to select the required peripheral mapping.

⚡

Smart Maintenance Device

The STM32L021D4P6 fits smart maintenance devices that record operating events, count equipment cycles, or activate a local indicator without needing a high-power processor. Its 0.29 uA Stop current supports long standby intervals, and the 32 MHz core can handle debouncing, event processing, and data buffering. The 2 KB SRAM is suitable for modest buffering, while 16 KB of Flash supports a compact application. In installations with motors, relays, or long cable runs, the MCU supply must be isolated from transients and ground currents. Validate wake sources, watchdog behavior, and recovery after brownout conditions to ensure the monitoring function remains dependable.

What is the STM32L021D4P6?
The STM32L021D4P6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics built around the Arm Cortex-M0+ processor. It operates at up to 32 MHz, includes 16 KB of Flash and 2 KB of SRAM, and is packaged in 14-pin TSSOP. According to the manufacturer product page, it belongs to the STM32L021x4 access-line MCU family for compact embedded and low-power control systems.
What are the key specifications of STM32L021D4P6 that engineers should know?
The STM32L021D4P6 combines a 32 MHz Arm Cortex-M0+ core, 16 KB of Flash, 2 KB of SRAM, and a 1.65 V to 3.6 V supply range in 14-pin TSSOP. The manufacturer datasheet also specifies 76 uA/MHz in Run mode, 0.29 uA in Stop mode, 0.23 uA in Standby mode, and a -40 C to +125 C operating-temperature range.
What is the operating voltage of STM32L021D4P6?
The STM32L021D4P6 operates from 1.65 V to 3.6 V. According to the manufacturer datasheet, this range makes the MCU suitable for low-voltage embedded products using 1.8 V or 3.3 V power rails. Designers should verify that every external peripheral, pull network, and programming connection remains compatible with the selected rail.
How much power does STM32L021D4P6 consume?
The STM32L021D4P6 consumes 76 uA/MHz in Run mode according to the manufacturer datasheet. Its low-power figures include 0.23 uA in Standby mode with two wakeup pins and 0.29 uA in Stop mode with 16 wakeup lines. Stop operation with the RTC active and 2 KB of RAM retained is specified at 0.54 uA.
How quickly does STM32L021D4P6 wake from Stop mode?
The STM32L021D4P6 can wake from Stop mode in 5 us when execution resumes from Flash memory. According to the manufacturer datasheet, the device also supports 16 Stop-mode wakeup lines. This short recovery interval allows a controller to reduce its duty cycle while responding promptly to sensor, communication, or user-interface events.
Where can I download the STM32L021D4P6 datasheet PDF?
Download the STM32L021D4P6 technical documentation from the STMicroelectronics STM32L021D4 product page linked on this page. The manufacturer page is the appropriate starting point for the datasheet, pin descriptions, memory map, electrical characteristics, and package drawings. Use the pin-description table when assigning each 14-pin TSSOP signal and check the package drawing against the PCB footprint.
Where can I find the STM32L021D4P6 pinout?
The STM32L021D4P6 pinout is defined in the manufacturer datasheet and package drawing. The device uses a 14-pin TSSOP package, but signal functions can vary among alternate-function configurations. Use the manufacturer pin-description table to verify reset, supply, ground, programming, clock, peripheral, and interrupt assignments before routing the PCB.
What is the STM32L021D4P6 vs STM32L011D4P6 difference?
The STM32L011D4P6 is the closest confirmed substitute for the STM32L021D4P6 and is identified as an equivalent in a published cross-reference result. Both use the same compact 14-pin class and provide comparable low-power Cortex-M0+ operation. Before substitution, confirm flash capacity, SRAM, AES availability, peripheral mix, pin multiplexing, and qualification requirements against the manufacturer documentation for each device.
When should I choose STM32L021D4P6 over STM32L011D4P6?
Choose the STM32L021D4P6 when the design specifically requires the exact STM32L021D4 device, its defined peripheral configuration, and its published qualification characteristics. The STM32L011D4P6 may suit a footprint-compatible redesign only after a complete review of memory, peripherals, pin multiplexing, firmware, and lifecycle requirements. Package fit alone does not guarantee functional equivalence.
What is the best drop-in replacement for STM32L021D4P6?
The STM32L011D4P6 is the only confirmed same-package substitute identified for the STM32L021D4P6, and it should be treated as a conditional drop-in alternative rather than an automatic replacement. Verify its 14-pin TSSOP footprint, supply limits, memory configuration, peripheral assignments, and required firmware support in the manufacturer documentation before approving the substitution.
Can STM32L011D4P6 replace STM32L021D4P6?
The STM32L011D4P6 can be considered for replacement because a published cross-reference lists it as equivalent to the STM32L021D4P6 and both are 14-pin Cortex-M0+ members of the STM32L0 family. Final approval still requires pin-by-pin and firmware review. Confirm peripheral availability, memory behavior, clock configuration, and all electrical limits for the finished product.
Is STM32L021D4P6 suitable for battery-powered sensor applications?
The STM32L021D4P6 is suitable for battery-powered sensor applications because it offers 0.29 uA Stop-mode current, 0.23 uA Standby-mode current, and a 5 us Flash wakeup time. Its 32 MHz Cortex-M0+ core also provides sufficient processing capability for local sensing, threshold evaluation, and low-duty-cycle data handling without keeping the processor active continuously.
Where can I buy STM32L021D4P6 online?
Use the Request a Quote form on this page to request STM32L021D4P6 pricing, stock confirmation, and lead time. The form connects the request with the relevant sales channel without embedding a static price that may become outdated. Include the required quantity, package preference, target date, and any production or traceability requirements in the request.
What is the price of STM32L021D4P6?
Current STM32L021D4P6 pricing is obtained through the Request a Quote form on this page. The form supports quantity-specific sourcing and accounts for market availability at the time of review. Request the exact 14-pin TSSOP ordering code and include your required shipment date so the quotation reflects the intended production schedule.
What is the lead time for STM32L021D4P6?
The current lead time for STM32L021D4P6 is confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, production schedule, and component availability, so it should be reviewed against the product’s required production date. Submit the forecast quantity and schedule when requesting the quotation.
Is STM32L021D4P6 active and what is its lifecycle status?
The STM32L021D4P6 is presented as an active STMicroelectronics product with current manufacturer and distributor product pages. For production planning, confirm the latest lifecycle statement and any packing or qualification notices from STMicroelectronics at the time of release. Use the manufacturer product page as the controlling source for lifecycle notices.

Impormasyon ng Talumpati sa Engineering for STM32L021D4P6 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the STM32L021D4P6 when the design requires the exact STM32L021x4 access-line MCU, particularly its 32 MHz Cortex-M0+ performance, 16 KB Flash, 2 KB SRAM, AES capability, and documented low-power behavior in a 14-pin TSSOP package. It is a strong fit for compact sensor nodes, industrial controls, portable instruments, and maintenance devices where standby energy matters. Consider the STM32L011D4P6 only when sourcing continuity justifies a second-source review and the alternative’s pin functions, peripherals, firmware requirements, and lifecycle status have been verified. A different package, even if electrically similar, is not a drop-in replacement because PCB escape geometry and pad dimensions may differ. For production, request current supply and lifecycle confirmation through the quote workflow and review any manufacturer packing or qualification notices.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto STM32L011D4P6
Brand STMicroelectronics STMicroelectronics
Package 14-pin TSSOP 14-pin TSSOP
Processor Core Arm Cortex-M0+ Arm Cortex-M0+
Flash Memory 16 KB 16 KB

Pangunahing mga Pagkakaiba

  • Exact STM32L021x4 family configuration (kumpara saSTM32L011D4P6)
  • Fast low-power wakeup (kumpara saSTM32L011D4P6)
  • Compact low-power feature set (kumpara saSTM32L011D4P6)

Talaan ng Disenyo

Place the MCU decoupling capacitor at the supply pin with the shortest possible trace, and provide a compact return path to the associated ground pin. The 14-pin TSSOP footprint has limited escape space, so assign pins according to the manufacturer alternate-function table before routing. Keep programming, reset, and debug nets accessible for production test while maintaining separation from switching nodes.

Design the power tree around the device's 1.65 V to 3.6 V operating range and evaluate brownout behavior at the minimum rail voltage. A 32 MHz operating condition requires sufficient decoupling and a supply capable of supporting the relevant current transient. For battery products, include peripheral leakage and board-level sleep current in the energy budget because the MCU specifications alone do not represent total system consumption.

Do not assume that a 14-pin Cortex-M0+ MCU offers every peripheral function on every pin. Review alternate-function mapping, debug access, clock pins, and wakeup-capable inputs in the manufacturer pin-description table. When considering the STM32L011D4P6 as a substitute, also verify peripheral differences and firmware behavior rather than relying on package dimensions alone.

Use a quiet ground reference beneath the MCU and route high-current return paths away from sensitive inputs. If the controller sits beside relays, motor drivers, or switching supplies, constrain the switching current loop and place bulk energy storage near the noise source. Keep antenna and communication sections separated from the supply-return path where practical to reduce radiated and conducted coupling into the control circuit.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance declarations were not identified in the available product information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from the manufacturer documentation for the ordered device.

Data napatotohanan sa: 2026-11-19 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

STM32L021D4P6 datasheet STM32L021D4P6 pinout STM32L021D4P6 datasheet pdf STM32L021D4P6 equivalent STM32L021D4P6 replacement STM32L021D4P6 cross reference STM32L021D4P6 vs STM32L011D4P6 STM32L021D4P6 price STM32L021D4P6 stock STM32L021D4 TSSOP pinout STM32L021D4P6 low power application STMicroelectronics STM32L021D4P6

Mga kaugnay na Mga Komponente at mga Tuntunin

STMicroelectronics STM32L021D4P6 STM32L021D4 STM32L011D4P6 Arm Arm Cortex-M0+ microcontroller MCU 32-bit RISC processor embedded microcontroller ultra-low-power microcontroller 16 KB Flash 2 KB SRAM AES 14-pin TSSOP TSSOP package family surface-mount package 1.65 V to 3.6 V power supply Run mode Stop mode Standby mode RTC battery-powered sensor node industrial control STM32L0 series
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ