Microchip Technology

SY88933VKI - 1.25Gbps PECL Post Amplifier | Microchip

部品番号: SY88933VKI ✗ 生産終了
3.3 V or 5 V Vdss 10-MSOP / 10-TFSOP Package
MOQ: 1 |

SY88933VKI 概要

The Microchip SY88933VKI is a low-power limiting postamplifier for fiber-optic receiver systems, supporting data rates up to 1.25 Gbps from a single 3.3 V or 5 V supply and providing a TTL-compatible signal-detect output. The device is packaged in a 10-MSOP, also identified as a 10-TFSOP measuring 3.00 mm wide.

A limiting postamplifier is a special-purpose amplifier used after the transimpedance amplifier in an optical receiver. It reshapes a noisy analog signal into a clean digital output while limiting the peak amplitude to improve signal integrity. Within the receiver signal chain, it belongs to the broader optical communications IC category and supports transceivers, PON equipment, and other high-speed fiber links.

The SY88933VKI supports operation from a 3.3 V or 5 V rail, accommodates signals as high as 1.25 Gbps, and offers low-noise PECL data outputs. Its TTL signal-detect function provides a chatter-free indication that the incoming signal has reached the required amplitude. The 10-MSOP package also allows a compact implementation on optical-network circuit boards.

Internally, the limiting postamplifier accepts the linear output of a typical transimpedance amplifier, where noise and amplitude variation can otherwise affect downstream clock-and-data-recovery circuitry. The limiting stage establishes a stable logic amplitude, while the PECL-compatible outputs interface efficiently with high-speed digital logic. This makes the device useful where a conventional general-purpose amplifier would be too slow or too noisy.

Typical applications include 1.25 Gbps fiber-optic receivers, PON optical network equipment, high-speed optical transceiver modules, and receiver cards that combine a photodiode, transimpedance amplifier, postamplifier, and clock-and-data-recovery circuit. In these systems, the SY88933VKI can reduce signal degradation between the TIA and downstream logic.

When laying out the receiver circuit, place the device close to the TIA and keep the high-speed input route short. Use controlled-impedance routing and provide a low-inductance return path for the PECL outputs. Confirm output logic levels, supply voltage, termination, and signal-detect polarity against the receiver system requirements before production release.

This page combines manufacturer product information with practical signal-chain guidance, package identification, sourcing context, and honest drop-in replacement analysis. It helps engineers distinguish the SY88933VKI's verified 1.25 Gbps PECL capability from alternatives that may use the same package without providing equivalent signal-path behavior.

ドロップイン代替品: SY88933VKI — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

SY88933VKG

✅ ドロップイン
Microchip Technology
📦 10-MSOP
Limiting postamplifier · 1.25 Gbps · 3.3 V to 5.0 V · 5 mV peak-to-peak · -40°C to +85°C · Low-noise PECL data outputs · TTL SD output · Programmable SD LVL pin

価格はお問い合わせください

データシートを見る →

SY88933VKI-TR

✅ ドロップイン
📦 10-MSOP
Same SY88933VKI electrical family and 1.25 Gbps specification; ordering suffix differs by manufacturer packaging convention, with no quantified electrical difference stated

📋 参考代替品(カタログ未掲載)

SY88933VKI 最大定格&電気的特性

Product Type Limiting postamplifier IC
Maximum Data Rate 1.25 Gbps
電源電圧 3.3 V or 5 V
Output Signal Type PECL
Signal Detect Output TTL
Signal Detect Behavior Chatter-free
Application Optical networks
Input Signal Linear output from a transimpedance amplifier
パッケージ 10-MSOP / 10-TFSOP
Package Width 3.00 mm
実装タイプ Surface mount
Packaging Tube
Lead-Free Status Contains lead

SY88933VKI 3.00 mm ピン配置ガイド

SY88933VKI (3.00 mm パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

SY88933VKI の 3.00 mm パッケージピン配置図

詳細なピン配置データはありません: SY88933VKI.

詳細は データシート をご参照ください。

主な用途

SY88933VKI の用途: 6 件s: 1.25 Gbps Fiber-Optic Receiver, PON Optical Network Terminal, Optical Transceiver Module, High-Speed Optical Receiver Card, Clock-and-Data-Recovery Front End, Legacy PON Equipment Repair.

🌐

1.25 Gbps Fiber-Optic Receiver

The SY88933VKI is used after the receiver's transimpedance amplifier, where the amplified photodiode signal may contain noise and amplitude variation. Its limiting action restores a defined logic amplitude before the clock-and-data-recovery circuit, while the low-noise PECL outputs support the 1.25 Gbps data path. The Micrel Semiconductor product page identifies this TIA-following arrangement as the intended architecture. The 10-MSOP footprint also keeps the limiting stage physically compact beside the optical front end.

🌐

PON Optical Network Terminal

In a passive optical network terminal, the SY88933VKI can occupy the receive path between a transimpedance amplifier and the downstream logic. Its ability to operate from a single 3.3 V or 5 V supply matches common transceiver rail levels, while operation through 1.25 Gbps addresses PON-class line rates. The limiting stage reduces the impact of amplitude variation at the TIA output, and the TTL signal-detect output provides a separate receiver-status indication.

🖥️

Optical Transceiver Module

The SY88933VKI is suitable for the receive side of a compact optical transceiver where board area and power are constrained. Placing the limiting postamplifier after the TIA produces clean PECL outputs for the transceiver's CDR or digital interface. Its 10-MSOP package measures 3.00 mm wide, supporting dense module layouts, while the low-power architecture avoids the bulk of a general-purpose high-speed amplifier solution.

📺

High-Speed Optical Receiver Card

A receiver card can use the SY88933VKI to condition a recovered analog signal before it reaches high-speed digital circuitry. The limiting function converts the TIA's variable-amplitude output into a signal with controlled logic swing, helping preserve data integrity at 1.25 Gbps. The separate chatter-free TTL signal-detect output can also support loss-of-signal supervision, monitoring, or system-state logic on the receiver board.

🔧

Clock-and-Data-Recovery Front End

The SY88933VKI provides the clean limiting stage immediately before a CDR input in a 1.25 Gbps optical link. By reducing noise and amplitude variation inherited from the TIA, it gives the CDR a more repeatable signal to detect and recover. PECL outputs are suitable for compatible high-speed logic, while the TTL detect output can provide an independent indication that sufficient optical signal has arrived.

🏭

Legacy PON Equipment Repair

The SY88933VKI is useful when maintaining a previously deployed PON receiver or optical-network card that uses its established 10-MSOP footprint and 1.25 Gbps signal path. Because the target is listed as discontinued, procurement should focus on traceable inventory and equivalent package qualification. The SY88933VKG provides a documented active-family option, but engineers must still verify pinout, temperature grade, and signal timing against the original design.

おすすめ製品の概要

SY88933V Same Microchip limiting-postamplifier family 使用用途: 1.25 Gbps Fiber-Optic Receiver, PON Optical Network Terminal, High-Speed Optical Receiver Card, Clock-and-Data-Recovery Front End SY88933VKG Microchip Technology 使用用途: 1.25 Gbps Fiber-Optic Receiver, Optical Transceiver Module, High-Speed Optical Receiver Card, Legacy PON Equipment Repair SY88933VKI-TR Related orderable family member 使用用途: PON Optical Network Terminal, Optical Transceiver Module, Clock-and-Data-Recovery Front End, Legacy PON Equipment Repair
What is the SY88933VKI used for?
The SY88933VKI is a low-power limiting postamplifier used in fiber-optic receivers to convert the noisy linear output of a transimpedance amplifier into clean high-speed digital signals. According to the Micrel Semiconductor product description, it is designed for optical-network receiver stages operating at up to 1.25 Gbps.
What is the operating voltage of SY88933VKI?
The SY88933VKI operates from a single 3.3 V or 5 V supply. The Micrel Semiconductor datasheet identifies both rails as supported for operation through 1.25 Gbps. This dual-voltage capability allows the amplifier to fit systems using either common fiber-optic transceiver supply levels without changing the package footprint.
How fast can SY88933VKI operate?
The SY88933VKI supports data rates up to 1.25 Gbps. The Micrel Semiconductor datasheet describes it as a 3.3 V/5 V, 1.25 Gbps PECL low-power limiting postamplifier. Its limiting function is intended to restore a usable digital amplitude after a transimpedance amplifier.
Where can I download the SY88933VKI datasheet PDF?
The manufacturer product page for the SY88933V family is the preferred starting point for technical documentation and ordering information. A mirrored eight-page Micrel Semiconductor datasheet is also available through the AllDataSheet listing. Use the manufacturer page to confirm the latest ordering code, lifecycle status, and documentation before design release.
Where can I find the SY88933VKI pinout?
The SY88933VKI uses a 10-MSOP, also listed as a 10-TFSOP, but the individual pin assignments are not reproduced in the available product summaries. Consult the pin-description table and package drawing in the Micrel Semiconductor datasheet before assigning PCB nets. The physical package is 3.00 mm wide, but package width alone does not establish pin functions.
What is the difference between a limiting postamplifier and a transimpedance amplifier?
A transimpedance amplifier converts photocurrent into a voltage, while the SY88933VKI amplifies and limits that recovered voltage into a clean logic signal. The Micrel product page specifically says the SY88933V connects to typical TIA outputs containing noise and amplitude variation. Both devices are normally cascaded in the same optical receiver.
What are the SY88933VKI signal outputs?
The SY88933VKI provides low-noise PECL data outputs and a separate TTL signal-detect output. The Micrel Semiconductor datasheet describes the detect function as chatter-free, giving the receiver system a stable indication of signal presence. PECL output levels and termination must be matched to the downstream clock-and-data-recovery device.
Is SY88933VKI suitable for PON equipment?
Yes, the SY88933VKI is suitable for PON and other optical-network receiver designs because it is specified for 1.25 Gbps operation and low-power PECL outputs. The Micrel Semiconductor datasheet lists optical networks as the principal application. Its limiting stage helps restore signal amplitude after the receiver's transimpedance amplifier.
When should I choose SY88933VKI over a general-purpose amplifier?
Choose the SY88933VKI when the design needs a dedicated 1.25 Gbps limiting stage with PECL outputs and TTL signal detect. A general-purpose amplifier may provide gain, but it does not provide the same receiver-specific limiting function, signal-detect output, or established high-speed interface. The SY88933VKI is therefore better matched to a TIA-to-CDR receiver chain.
What can replace the SY88933VKI?
A replacement must match the 10-MSOP footprint, 1.25 Gbps capability, 3.3 V or 5 V supply operation, PECL outputs, and TTL signal-detect behavior. The available cross-reference results identify the related SY88933VKG and SY88933VKI-TR ordering variants, but the target is listed as discontinued. Validate pin-level behavior and lifecycle requirements before approving any substitution.
Can SY88933VKG replace SY88933VKI?
The SY88933VKG is the closest documented same-series option because the Xecor comparison identifies both as 10-MSOP limiting postamplifiers for optical networks rated to 1.25 Gbps. It is marked active while the SY88933VKI is marked discontinued. Confirm the exact pinout, temperature range, packing code, and signal-detect polarity in the manufacturer documentation before treating it as a drop-in replacement.
Is SY88933VKI the same as SY88933VKI-TR?
The SY88933VKI-TR designation identifies the orderable version associated with the SY88933VKI family, with the suffix reflecting the manufacturer's packaging and ordering convention. Both belong to the same 1.25 Gbps, 10-MSOP limiting-postamplifier family. The suffix must still be checked against the required reel or tube format and production status.
What are the key specifications engineers should know about SY88933VKI?
The principal SY88933VKI specifications are 1.25 Gbps maximum data rate, single 3.3 V or 5 V operation, low-noise PECL outputs, chatter-free TTL signal detect, and a 10-MSOP package. The Micrel Semiconductor description also identifies low power and use after a transimpedance amplifier. These parameters define its position within a fiber-optic receiver chain.
What is the best Microchip equivalent for SY88933VKI?
The SY88933VKG is the best documented Microchip-family alternative because it retains the 10-MSOP limiting-postamplifier format, optical-network use, and 1.25 Gbps positioning. It is identified as active, whereas the SY88933VKI is discontinued. Package compatibility alone is not sufficient, so verify pin assignments and signal timing against the relevant Microchip datasheet.
Where can I buy SY88933VKI and what is its price?
Use the Request a Quote form on this page to request current SY88933VKI availability, lead time, and a unit quotation. The part is a legacy Microchip device and the available summaries do not provide a current qualifying quantity-break table. Its historical unit-price reference is handled separately from live quote requests.
Is SY88933VKI in stock and how long is the lead time?
Current stock and lead time for the obsolete SY88933VKI should be requested through the Request a Quote form on this page. The available product records establish that the component existed in a 10-MSOP package but do not show a dependable current inventory count. For an obsolete production design, confirm lot traceability and counterfeit-risk controls before committing the BOM.

エンジニアリング参考データ: SY88933VKI — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the SY88933VKI when maintaining a legacy 1.25 Gbps optical receiver that specifically uses its 10-MSOP pinout, low-noise PECL outputs, and TTL signal-detect function. It is most appropriate for repair or exact-design replication where lifecycle availability and supply-chain traceability matter more than obtaining a currently active product. Consider the SY88933VKG when an active same-family option is required; it retains the 10-MSOP package and 1.25 Gbps positioning, but its exact pinout, temperature range, and ordering details must be checked before substitution. SY88933VKI-TR is the related manufacturer ordering designation for the same target family and may be useful when matching a reel-packed BOM entry. For new designs, evaluate whether an active limiting-postamplifier with documented differential outputs, supply options, and lifecycle support would reduce long-term sourcing risk.

代替品との比較

パラメータ この製品 SY88933VKG SY88933VKI-TR
Product Type Limiting postamplifier IC Limiting postamplifier IC Limiting postamplifier IC
Brand Microchip Technology Microchip Technology Microchip Technology
Package 10-MSOP / 10-TFSOP 10-MSOP - same 10-MSOP - same
Maximum Data Rate 1.25 Gbps 1.25 Gbps 1.25 Gbps
Data Output Low-noise PECL PECL Low-noise PECL
Signal Detect Output Chatter-free TTL TTL TTL
Application Optical networks Optical networks Optical networks
Lifecycle Status Discontinued Active Discontinued
Mounting Type Surface mount Surface mount Surface mount

主な差別化要因

  • Established 1.25 Gbps optical-receiver signal-conditioning function (vs SY88933VKG)
  • Direct TTL signal-presence indication (vs SY88933VKG)
  • Compatibility with common optical-transceiver rails (vs SY88933VKI-TR)

設計ノート

Place the SY88933VKI close to the transimpedance amplifier output and minimize the input trace length. The 10-MSOP device is intended to condition a 1.25 Gbps signal, so excessive trace length, stubs, or an abrupt impedance transition can degrade signal integrity. Route the signal over a continuous reference plane and observe the package's pin-definition table before assigning connections.

Verify PECL output termination and voltage levels against the receiving clock-and-data-recovery device. PECL interfaces commonly use controlled termination arrangements, but the correct implementation depends on the complete receiver topology. Check the SY88933VKI supply configuration and the downstream device's input thresholds, then validate amplitude, rise time, and jitter with an appropriate high-speed test setup.

Do not treat package equivalence as complete functional equivalence. The available records confirm that related SY88933V parts use the 10-MSOP format and target 1.25 Gbps optical networks, but a replacement still requires pin-level review of power, ground, PECL outputs, and TTL signal-detect polarity. Also verify temperature grade and lifecycle status before using an alternative in a new production design.

Use the manufacturer's specified single-supply configuration for either 3.3 V or 5 V operation. Because the SY88933VKI is a discontinued legacy component, inspect the complete board for replacement parts that may have different supply-voltage or output-level requirements. Confirm the selected operating point against the actual datasheet rather than relying solely on the family description.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
No
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The available specification summary states that the component contains lead. The RoHS field was not legible, so RoHS, REACH, halogen-free, and conflict-minerals status remain unknown. AEC-Q100 is not applicable to the available product description.

データ検証日: 2026-11-20 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

SY88933VKI datasheet SY88933VKI pinout SY88933VKI datasheet pdf SY88933VKI equivalent SY88933VKI replacement SY88933VKI drop-in replacement SY88933VKI vs SY88933VKG Microchip SY88933VKI SY88933VKI 1.25Gbps PECL SY88933VKI 10-MSOP SY88933VKI optical receiver SY88933VKI price SY88933VKI stock SY88933VKI signal detect SY88933VKI application circuit

関連部品&用語

Microchip Technology Micrel Semiconductor SY88933VKI SY88933V SY88933VKG SY88933VKI-TR limiting postamplifier special-purpose amplifier fiber-optic receiver transimpedance amplifier TIA clock-and-data recovery PECL TTL signal detect 1.25 Gbps 3.3 V 5 V 10-MSOP 10-TFSOP surface mount optical networks PON low-noise amplifier chatter-free signal detection
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示