SY88933VKI - 1.25Gbps PECL Post Amplifier | Microchip
料号: SY88933VKI ✗ 停产SY88933VKI 概述
A limiting postamplifier is a special-purpose amplifier used after the transimpedance amplifier in an optical receiver. It reshapes a noisy analog signal into a clean digital output while limiting the peak amplitude to improve signal integrity. Within the receiver signal chain, it belongs to the broader optical communications IC category and supports transceivers, PON equipment, and other high-speed fiber links.
The SY88933VKI supports operation from a 3.3 V or 5 V rail, accommodates signals as high as 1.25 Gbps, and offers low-noise PECL data outputs. Its TTL signal-detect function provides a chatter-free indication that the incoming signal has reached the required amplitude. The 10-MSOP package also allows a compact implementation on optical-network circuit boards.
Internally, the limiting postamplifier accepts the linear output of a typical transimpedance amplifier, where noise and amplitude variation can otherwise affect downstream clock-and-data-recovery circuitry. The limiting stage establishes a stable logic amplitude, while the PECL-compatible outputs interface efficiently with high-speed digital logic. This makes the device useful where a conventional general-purpose amplifier would be too slow or too noisy.
Typical applications include 1.25 Gbps fiber-optic receivers, PON optical network equipment, high-speed optical transceiver modules, and receiver cards that combine a photodiode, transimpedance amplifier, postamplifier, and clock-and-data-recovery circuit. In these systems, the SY88933VKI can reduce signal degradation between the TIA and downstream logic.
When laying out the receiver circuit, place the device close to the TIA and keep the high-speed input route short. Use controlled-impedance routing and provide a low-inductance return path for the PECL outputs. Confirm output logic levels, supply voltage, termination, and signal-detect polarity against the receiver system requirements before production release.
This page combines manufacturer product information with practical signal-chain guidance, package identification, sourcing context, and honest drop-in replacement analysis. It helps engineers distinguish the SY88933VKI's verified 1.25 Gbps PECL capability from alternatives that may use the same package without providing equivalent signal-path behavior.
直接替换替代料: SY88933VKI ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
SY88933VKG
✅ 直接替换联系询价
查看数据手册 →SY88933VKI-TR
✅ 直接替换📋 参考替代料(不在目录中)
SY88933VKI 最大额定值与电气特性
| Product Type | Limiting postamplifier IC |
| Maximum Data Rate | 1.25 Gbps |
| 电源电压 | 3.3 V or 5 V |
| Output Signal Type | PECL |
| Signal Detect Output | TTL |
| Signal Detect Behavior | Chatter-free |
| Application | Optical networks |
| Input Signal | Linear output from a transimpedance amplifier |
| 封装 | 10-MSOP / 10-TFSOP |
| Package Width | 3.00 mm |
| 安装类型 | Surface mount |
| Packaging | Tube |
| Lead-Free Status | Contains lead |
SY88933VKI 3.00 mm 引脚配置指南
SY88933VKI(3.00 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: SY88933VKI.
请参阅 数据手册 以查看完整引脚配置。
典型应用
SY88933VKI 适用于 6 应用s: 1.25 Gbps Fiber-Optic Receiver, PON Optical Network Terminal, Optical Transceiver Module, High-Speed Optical Receiver Card, Clock-and-Data-Recovery Front End, Legacy PON Equipment Repair.
1.25 Gbps Fiber-Optic Receiver
The SY88933VKI is used after the receiver's transimpedance amplifier, where the amplified photodiode signal may contain noise and amplitude variation. Its limiting action restores a defined logic amplitude before the clock-and-data-recovery circuit, while the low-noise PECL outputs support the 1.25 Gbps data path. The Micrel Semiconductor product page identifies this TIA-following arrangement as the intended architecture. The 10-MSOP footprint also keeps the limiting stage physically compact beside the optical front end.
推荐
PON Optical Network Terminal
In a passive optical network terminal, the SY88933VKI can occupy the receive path between a transimpedance amplifier and the downstream logic. Its ability to operate from a single 3.3 V or 5 V supply matches common transceiver rail levels, while operation through 1.25 Gbps addresses PON-class line rates. The limiting stage reduces the impact of amplitude variation at the TIA output, and the TTL signal-detect output provides a separate receiver-status indication.
推荐
Optical Transceiver Module
The SY88933VKI is suitable for the receive side of a compact optical transceiver where board area and power are constrained. Placing the limiting postamplifier after the TIA produces clean PECL outputs for the transceiver's CDR or digital interface. Its 10-MSOP package measures 3.00 mm wide, supporting dense module layouts, while the low-power architecture avoids the bulk of a general-purpose high-speed amplifier solution.
推荐
High-Speed Optical Receiver Card
A receiver card can use the SY88933VKI to condition a recovered analog signal before it reaches high-speed digital circuitry. The limiting function converts the TIA's variable-amplitude output into a signal with controlled logic swing, helping preserve data integrity at 1.25 Gbps. The separate chatter-free TTL signal-detect output can also support loss-of-signal supervision, monitoring, or system-state logic on the receiver board.
推荐
Clock-and-Data-Recovery Front End
The SY88933VKI provides the clean limiting stage immediately before a CDR input in a 1.25 Gbps optical link. By reducing noise and amplitude variation inherited from the TIA, it gives the CDR a more repeatable signal to detect and recover. PECL outputs are suitable for compatible high-speed logic, while the TTL detect output can provide an independent indication that sufficient optical signal has arrived.
推荐
Legacy PON Equipment Repair
The SY88933VKI is useful when maintaining a previously deployed PON receiver or optical-network card that uses its established 10-MSOP footprint and 1.25 Gbps signal path. Because the target is listed as discontinued, procurement should focus on traceable inventory and equivalent package qualification. The SY88933VKG provides a documented active-family option, but engineers must still verify pinout, temperature grade, and signal timing against the original design.
推荐
推荐产品汇总
工程参考数据: SY88933VKI ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | SY88933VKG | SY88933VKI-TR |
|---|---|---|---|
| Product Type | Limiting postamplifier IC | Limiting postamplifier IC | Limiting postamplifier IC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 10-MSOP / 10-TFSOP | 10-MSOP - same | 10-MSOP - same |
| Maximum Data Rate | 1.25 Gbps | 1.25 Gbps | 1.25 Gbps |
| Data Output | Low-noise PECL | PECL | Low-noise PECL |
| Signal Detect Output | Chatter-free TTL | TTL | TTL |
| Application | Optical networks | Optical networks | Optical networks |
| Lifecycle Status | Discontinued | Active | Discontinued |
| Mounting Type | Surface mount | Surface mount | Surface mount |
关键差异点
- Established 1.25 Gbps optical-receiver signal-conditioning function (对比 SY88933VKG)
- Direct TTL signal-presence indication (对比 SY88933VKG)
- Compatibility with common optical-transceiver rails (对比 SY88933VKI-TR)
设计说明
Place the SY88933VKI close to the transimpedance amplifier output and minimize the input trace length. The 10-MSOP device is intended to condition a 1.25 Gbps signal, so excessive trace length, stubs, or an abrupt impedance transition can degrade signal integrity. Route the signal over a continuous reference plane and observe the package's pin-definition table before assigning connections.
Verify PECL output termination and voltage levels against the receiving clock-and-data-recovery device. PECL interfaces commonly use controlled termination arrangements, but the correct implementation depends on the complete receiver topology. Check the SY88933VKI supply configuration and the downstream device's input thresholds, then validate amplitude, rise time, and jitter with an appropriate high-speed test setup.
Do not treat package equivalence as complete functional equivalence. The available records confirm that related SY88933V parts use the 10-MSOP format and target 1.25 Gbps optical networks, but a replacement still requires pin-level review of power, ground, PECL outputs, and TTL signal-detect polarity. Also verify temperature grade and lifecycle status before using an alternative in a new production design.
Use the manufacturer's specified single-supply configuration for either 3.3 V or 5 V operation. Because the SY88933VKI is a discontinued legacy component, inspect the complete board for replacement parts that may have different supply-voltage or output-level requirements. Confirm the selected operating point against the actual datasheet rather than relying solely on the family description.
合规信息
The available specification summary states that the component contains lead. The RoHS field was not legible, so RoHS, REACH, halogen-free, and conflict-minerals status remain unknown. AEC-Q100 is not applicable to the available product description.