ラストタイムバイのお知らせ: SY89202UMI は生産終了が近づいています。最終注文日: お問い合わせ. 利用可能な代替部品を見る →
Microchip Technology

SY89202UMI - 1:8 1.5 GHz Clock Buffer | Microchip Technology

部品番号: SY89202UMI ✗ 生産終了
32-pin VFQFN with exposed pad Package 1.5 GHz Speed
MOQ: 1 |

SY89202UMI 概要

Microchip Technology SY89202UMI is a 1:8 clock fanout buffer, divider, and multiplexer IC operating up to 1.5 GHz in a 32-pin VFQFN package with an exposed pad. The device uses a differential input architecture and can accept AC- or DC-coupled signals as small as 100 mV, equivalent to 200 mVpp, without an external termination resistor network. Its eight outputs use 800 mV LVPECL-compatible signaling with rise and fall times guaranteed below 220 ps, making the device suitable for demanding clock-distribution networks.

A clock fanout buffer is a timing-device class that replicates one input clock across multiple outputs while controlling skew and jitter. Clock buffers can also support frequency division and multiplexing when the required configuration permits it. Within the broader hierarchy, the SY89202UMI belongs to the clock buffer and driver category, which falls under clock and timing integrated circuits. Its primary role is to distribute a high-speed differential clock to multiple loads without routing every branch directly from the clock source.

The 1:8 fanout ratio allows a single differential source to feed eight output branches, reducing the number of separate external buffer channels required in a high-speed system. The 1.5 GHz operating capability supports demanding communications, networking, test-and-measurement, and data-processing equipment. The exposed pad provides a thermal and electrical connection to the PCB copper area, which is important when distributing a fast-edge signal across a 32-pin surface-mount footprint.

The input termination architecture accepts either AC- or DC-coupled signals without placing termination components in the main signal path. This simplifies source interfacing while preserving low-amplitude operation. Output rise and fall times below 220 ps help maintain useful timing margin in systems with short clock periods. Differential clock distribution can also reduce sensitivity to common-mode noise when the source and receiving circuits are designed for matched differential operation.

Typical uses include server and network-interface clock distribution, backplane clock fanout, high-speed test equipment, telecommunications line cards, and FPGA or ASIC clock trees. In an FPGA design, the buffer can provide isolated branch clocks while limiting fanout loading on the source. In a communication card, it can distribute a common reference or recovered clock across multiple parallel processing channels.

Layout is critical because fast edges and differential clock signals can produce reflections, crosstalk, and supply-dependent timing errors. Route the differential pair over a continuous reference plane, use symmetrical geometry, minimize stubs, and provide a solid ground path. Decoupling should be placed close to the supply and ground pins. Review output spacing, return paths, and layer transitions in the manufacturer’s recommended layout before releasing the PCB.

This product page consolidates the device’s clock ratio, frequency, signaling, package, lifecycle, and replacement information with practical guidance for differential routing and thermal design. It also distinguishes verified functional equivalents from broader component-level alternatives so engineers can assess compatibility before changing an existing 32-pin layout.

ドロップイン代替品: SY89202UMI — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

SY89202UMG-TR

✅ ドロップイン
📦 32-VFQFN
Identical 1:8 clock-divider configuration, 1.5 GHz class, and 32-pin package; difference is the ordering suffix, with no circuit modification identified

📋 参考代替品(カタログ未掲載)

SY89202UMG

✅ ドロップイン
📦 32-VFQFN
Same SY89202 family and 32-pin configuration; ordering suffix differs by 0% in identified fanout and package, while grade details require confirmation

📋 参考代替品(カタログ未掲載)

SY89202UMI-TR

✅ ドロップイン
📦 32-VFQFN
Same SY89202 device and 1:8, 32-VFQFN configuration with a tape-and-reel ordering suffix; core electrical parameters match

📋 参考代替品(カタログ未掲載)

8S89202BKILFT

✅ ドロップイン
📦 32-VFQFN
Listed as an SY89202 alternative with the same 1:8 family function and 32-pin class; ordering code differs, with electrical tolerances requiring review

📋 参考代替品(カタログ未掲載)

8S89202BKILF

✅ ドロップイン
📦 32-VFQFN
Listed as an SY89202 alternative with matching family function and package class; ordering code differs, with detailed electrical limits requiring review

📋 参考代替品(カタログ未掲載)

8S89202BKILF/W

✅ ドロップイン
📦 32-VFQFN
Listed as an SY89202 alternative with the same 1:8 and 32-pin family platform; ordering code differs, with grade and qualification details requiring review

📋 参考代替品(カタログ未掲載)

SY89202UMI 仕様

Product Type Clock fanout buffer, divider, and multiplexer IC
Fanout Ratio 1:8
最大クロック周波数 1.5 GHz
パッケージ 32-pin VFQFN with exposed pad
Input Signal Differential AC- or DC-coupled input
Minimum Input Signal 100 mV, equivalent to 200 mVpp
Input Termination Architecture 3-pin architecture without external termination resistors in the signal path
Output Logic Level 800 mV LVPECL-compatible
Maximum Output Rise/Fall Time Less than 220 ps
出力数 8 outputs
実装タイプ Surface mount

SY89202UMI 32-pin vfqfn with exposed pad ピン配置ガイド

SY89202UMI (32-pin vfqfn with exposed pad パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

SY89202UMI の 32-pin vfqfn with exposed pad パッケージピン配置図

詳細なピン配置データはありません: SY89202UMI.

詳細は データシート をご参照ください。

主な用途

SY89202UMI の用途: 6 件s: Network Interface Clock Distribution, FPGA and ASIC Clock Trees, Telecommunications Line Cards, Server Platform Clock Distribution, High-Speed Test and Measurement, Industrial Data Acquisition.

🌐

Network Interface Clock Distribution

The SY89202UMI fits network-interface designs that must distribute one differential clock across multiple serial, processor, or transceiver branches. Its 1:8 fanout provides eight 800 mV LVPECL-compatible outputs, while the 1.5 GHz capability covers high-speed communication data paths. The input can operate as low as 100 mV, or 200 mVpp, which is useful when the source has limited amplitude. Place the buffer near the clock source, keep the differential input route short, and give each output a controlled termination and return path to preserve signal integrity.

🖥️

FPGA and ASIC Clock Trees

The SY89202UMI is suitable for FPGA or ASIC clock trees where a single differential source must feed multiple internal or external clock domains. The 1:8 fanout reduces the need for repeated source-buffer stages, while rise and fall times below 220 ps provide a fast, low-skew output. The 32-VFQFN exposed pad should be connected to a solid ground or supply plane with short thermal vias. Verify the receiving device’s clock-input thresholds, maximum input frequency, and allowable divider or bypass mode before assigning each output.

📡

Telecommunications Line Cards

The SY89202UMI can distribute a common or recovered clock across parallel channels in telecommunications line cards and optical-network equipment. Its differential input accepts AC- or DC-coupled sources down to 100 mV, or 200 mVpp, without an external termination resistor network in the signal path. Eight LVPECL-compatible outputs support parallel clock branches, and operation up to 1.5 GHz accommodates high-speed line-card processing. Control impedance, minimize branch stubs, and maintain equal routing lengths where skew-sensitive circuitry requires matched clock arrivals.

🖥️

Server Platform Clock Distribution

The SY89202UMI is applicable in server platforms that distribute a common reference clock to processors, fabric, SerDes blocks, or interface controllers. A 1:8 fanout supplies eight low-jitter LVPECL-compatible branches from one differential input, and the 1.5 GHz rating supports high-speed system timing. Because the package includes an exposed pad, use a continuous reference plane and adequate via stitching to reduce inductance. Check each receiver’s termination scheme and keep clock branches electrically isolated to prevent crosstalk and unintended loading.

🔧

High-Speed Test and Measurement

The SY89202UMI can provide synchronized clock branches in high-speed test equipment, oscilloscope subsystems, and automated measurement platforms. Its eight 800 mV LVPECL-compatible outputs and sub-220 ps edge rate support distribution of a common clock to multiple acquisition or timing channels. The small differential input amplitude tolerance also simplifies adaptation of low-amplitude source circuits. For best performance, preserve differential coupling, use low-loss routing, provide uninterrupted reference planes, and verify that channel skew and jitter remain within the instrument’s calibration budget.

🏭

Industrial Data Acquisition

The SY89202UMI supports industrial data-acquisition systems that synchronize multiple converters, processors, or communication blocks from one clock source. The 1:8 fanout allows eight branches to be distributed from a single differential input, while the 1.5 GHz maximum frequency accommodates demanding sampling and processing subsystems. Use short, symmetric routing and provide a continuous ground reference beneath the pair. Account for the exposed pad when defining the thermal design, and verify that the system’s ground reference and source amplitude remain within the clock input’s operating limits.

What are the key specifications of SY89202UMI that engineers should know?
The SY89202UMI is a 1:8 clock fanout buffer rated up to 1.5 GHz and packaged in a 32-pin VFQFN with an exposed pad. It accepts a differential AC- or DC-coupled input as small as 100 mV, equivalent to 200 mVpp, and provides eight 800 mV LVPECL-compatible outputs. According to the manufacturer datasheet, output rise and fall times are guaranteed below 220 ps. The exposed pad provides a direct connection to PCB copper for thermal dissipation and low-impedance return paths.
Where to download the SY89202UMI datasheet PDF?
The SY89202UMI datasheet PDF is available from the Micrel datasheet link listed for this product. It describes the 1:8 clock fanout function, 1.5 GHz maximum operating frequency, differential input architecture, and 800 mV LVPECL-compatible outputs. Download the manufacturer datasheet and use its package drawing, pin-description table, recommended decoupling, and layout guidance before releasing a PCB or changing an existing design.
Where can I find the SY89202UMI pinout?
Use the pin-description table and package drawing in the manufacturer datasheet to locate the SY89202UMI pinout. The device is a 32-pin VFQFN with an exposed pad, so a generic QFN-32 diagram should not be used to infer pin functions. Pay particular attention to the exposed thermal pad, differential input connections, supply pins, ground pins, and output pins when assigning PCB tracks and test points.
Is the SY89202UMI suitable for high-speed clock distribution?
Yes, the SY89202UMI is suitable for high-speed clock distribution because it supports operation up to 1.5 GHz and provides eight LVPECL-compatible outputs with rise and fall times below 220 ps. Its differential input accepts signals as small as 100 mV, or 200 mVpp. The suitability of the device still depends on the source amplitude, output loading, trace geometry, return path, receiver thresholds, and the total skew and jitter budget of the complete system.
What clock functions does the SY89202UMI provide?
The SY89202UMI functions as a 1:8 clock fanout buffer and can also operate as a divider or multiplexer in suitable digital-clock configurations. One differential input is distributed across eight outputs, reducing the number of separate buffer channels required by a clock tree. According to the manufacturer datasheet, the outputs are 800 mV LVPECL-compatible and use a low-skew, low-jitter architecture intended for high-speed digital systems.
How should the differential input be connected to SY89202UMI?
The differential input may be connected to either an AC-coupled or DC-coupled source with a signal as small as 100 mV, equivalent to 200 mVpp. The manufacturer datasheet describes a three-pin input termination architecture that avoids a separate termination resistor network in the signal path. Preserve differential symmetry, provide a continuous reference plane, and avoid adding stubs. Confirm the source common-mode voltage against the device input limits before finalizing the interface.
What is the difference between SY89202UMI and SY89202UMG-TR?
SY89202UMG-TR is identified as a complete replacement for SY89202UMI because its main performance characteristics and terminals are consistent and its package matches the existing design. The comparison material describes both as 32-pin MLF or 32-VFQFN devices with an eight-output, one-input clock-divider configuration. The one-day clock-output jitter, device marking, temperature grade, and ordering suffix should still be checked against the manufacturer documents before approving the substitution.
What is the best drop-in replacement for SY89202UMI?
SY89202UMG-TR is the best-supported drop-in candidate for SY89202UMI because the available comparison states that performance, terminals, and package are consistent and that no circuit modification is required. It retains the 32-pin VFQFN or MLF format and the eight-output, one-input clock configuration. Use the Request a Quote form on this page for current availability and lead time, and validate lifecycle status, temperature grade, marking, and lot traceability before production use.
Can SY89202UMG-TR replace SY89202UMI?
Yes, SY89202UMG-TR can replace SY89202UMI when the device is used within the electrical and timing limits stated in the manufacturer comparison material. The replacement material explicitly describes the parts as having consistent performance characteristics, terminals, and packages, and states that replacement does not require modification of the existing circuit. Verify supply requirements, operating-temperature grade, and production traceability for the selected ordering option.
When should I choose SY89202UMI over another clock buffer?
Choose the SY89202UMI when the design needs one differential clock source distributed to eight outputs at rates up to 1.5 GHz. It is particularly useful when the source signal can be as small as 100 mV and the receiver expects an 800 mV LVPECL-compatible output. Select a different buffer when the required fanout ratio, logic level, supply topology, maximum frequency, package, or output-edge requirement falls outside the device specifications.
Is SY89202UMI the same as SY89202UMG?
SY89202UMI and SY89202UMG are closely related clock-buffer variants with a 32-pin package and an eight-output configuration, but ordering suffixes can encode differences in temperature grade, packaging, or qualification. The documented comparison with SY89202UMG-TR identifies it as a complete replacement, subject to the stated electrical and package consistency. Do not treat all suffixes as automatically interchangeable without checking the ordering information and manufacturer marking.
Where can I buy SY89202UMI online?
Use the Request a Quote form on this page to request SY89202UMI availability, current lead time, and order handling. The form provides a direct purchasing path for this product without relying on static inventory claims. Include your required quantity, package or tape-and-reel preference, target date, and acceptable alternate date when requesting the quote so the supply response can match the production schedule.
What is the price of SY89202UMI?
The current price for SY89202UMI is obtained through the Request a Quote form on this page. Price depends on order quantity, requested delivery date, packaging preference, component condition, and market availability. Submit the required quantity and project timing in the quote request; the response will provide the applicable commercial terms for that order rather than a potentially stale generic price.
What is the lead time for SY89202UMI?
Request the current SY89202UMI lead time through the Request a Quote form on this page. Because the device is identified as end-of-life, include the required quantity, approved manufacturer part number, date code policy, and whether alternate sourcing is acceptable in the request. These details allow the supply response to address lot traceability and scheduling rather than providing a generic timing estimate.
Is SY89202UMI in stock?
SY89202UMI stock should be confirmed through the Request a Quote form on this page. The component is identified as end-of-life, so inventory quantity, date code, traceability, and lot consistency are important procurement details. State the required quantity and target delivery date in the request, and specify whether an authorized alternate such as the documented SY89202UMG-TR may be proposed if the original part cannot be allocated.
What is the best equivalent for SY89202UMI in an existing 32-pin design?
SY89202UMG-TR is the best-documented equivalent for an existing 32-pin SY89202UMI design because the available comparison identifies consistent terminals, package, and principal performance characteristics with no circuit modification required. Other SY89202-family names may represent related orderable variants, but suffix and qualification differences must be checked before release. Confirm the pin description, supply limits, timing limits, and lifecycle status for the exact replacement MPN.

エンジニアリング参考データ: SY89202UMI — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the SY89202UMI when a system needs to distribute one differential clock to eight LVPECL-compatible branches at frequencies up to 1.5 GHz, especially when the source amplitude is only 100 mV and the design benefits from the integrated three-pin input termination architecture. SY89202UMG-TR is the preferred replacement candidate because the available comparison identifies matching terminals, package, and principal performance characteristics with no circuit modification. SY89202UMG and SY89202UMI-TR are also family-level choices, but their exact ordering and qualification details should be checked before release. The 8S89202BKILF-series parts are listed alternatives, but their detailed electrical limits and lifecycle status require more careful qualification. Since the original device is end-of-life, choose based on production continuity, traceability, operating-temperature requirements, and timing performance rather than package appearance alone.

代替品との比較

パラメータ この製品 SY89202UMG-TR SY89202UMG SY89202UMI-TR
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology

主な差別化要因

  • Directly documented pin-and-package replacement (vs SY89202UMG-TR)
  • Eight-way clock distribution from one differential input (vs 8S89202BKILFT)
  • Fast LVPECL-compatible output edges (vs 8S89202BKILF)
  • Low-amplitude AC- or DC-coupled input support (vs SY89202UMG)

設計ノート

Route the differential clock input as a short, impedance-controlled pair over a continuous reference plane. Avoid branch stubs and unnecessary test pads because the SY89202UMI can produce output edges faster than 220 ps. Keep the pair geometry symmetric, avoid crossing plane boundaries when practical, and place any input termination or coupling components close to the clock source. The manufacturer’s three-pin termination architecture eliminates a separate signal-path resistor network, but it does not remove the need to verify source common-mode voltage and input limits.

Provide the 32-VFQFN exposed pad with a low-impedance connection to the appropriate plane and a dense array of short thermal and electrical vias. Keep supply and ground connections short, place local decoupling at the device pins, and avoid placing high-speed clock routes beneath noisy converter or digital power paths. If all eight outputs are used, maintain adequate spacing between output pairs and provide continuous return paths to reduce crosstalk, especially where clock branches fan out near sensitive receivers.

Do not substitute the device solely because the package drawing and fanout ratio match. Confirm the exact ordering suffix, electrical limits, operating-temperature grade, output configuration, and lifecycle status. The product is identified as end-of-life, so production planning should include traceability, date-code requirements, approved alternate sourcing, and a last-time-buy decision where appropriate. For replacement assemblies, compare every pin name and supply connection against the manufacturer pin-description table rather than relying on a generic QFN-32 footprint.

Account for source-to-output delay, output-to-output skew, and jitter when allocating timing margin in the receiving system. The output edge rate is guaranteed below 220 ps, so excessive connector launches, long traces, or poorly terminated loads can dominate device jitter and produce reflections. Use controlled-impedance routing, appropriate LVPECL-compatible terminations, matched output geometry, and receiver thresholds consistent with 800 mV signaling. Validate the assembled board with clock-quality measurements when system timing is critical.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The SY89202UMI is a clock and timing integrated circuit rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering code.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

SY89202UMI datasheet SY89202UMI pinout SY89202UMI datasheet pdf SY89202UMI equivalent SY89202UMI replacement SY89202UMI price SY89202UMI stock Microchip SY89202UMI SY89202UMI 1.5 GHz clock buffer SY89202UMI 32-VFQFN pinout SY89202UMI vs SY89202UMG-TR SY89202UMI FPGA clock tree

関連部品&用語

Microchip Technology SY89202UMI SY89202UMG-TR SY89202UMG SY89202UMI-TR 8S89202BKILFT 8S89202BKILF 8S89202BKILF/W clock fanout buffer clock buffer clock driver clock and timing IC 1:8 fanout 1.5 GHz differential clock LVPECL 800 mV LVPECL-compatible AC-coupled input DC-coupled input 100 mV differential input 220 ps edge rate 32-VFQFN QFN family surface mount
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示