Microchip Technology

SY89296UTG - 1024-Tap Programmable Delay Line | Microchip

部品番号: SY89296UTG ✓ 生産中
Approximately 40 ps Vdss 32-pin TQFP Package
MOQ: 1 |

SY89296UTG 概要

Microchip Technology SY89296UTG is a programmable delay-line IC with 1024 taps, a digitally selectable delay range of 3.2 ns to 14.8 ns, and 10 ps nominal adjustment increments. It is offered in a 32-pin TQFP package and is identified as a 2.5 V/3.3 V PECL delay line. The SY89296U family also supports continuous fine adjustment over an approximately 40 ps range by varying a control voltage.

A programmable delay line is a timing IC that propagates an input signal through a controlled number of delay elements. It belongs to the delay-line and timing-element hierarchy within clock and timing integrated circuits. Instead of relying on a fixed propagation delay, the SY89296UTG allows a system controller to select the delay digitally and apply an additional analog trim. This combination supports calibration, phase alignment, skew adjustment, and timing compensation in systems where fixed-delay components would require several alternative part numbers.

The primary feature set includes 1024 selectable taps, a 3.2 ns minimum delay, a 14.8 ns maximum delay, and 10 ps digital increments. The total range spans 11.6 ns, allowing 1024 evenly spaced selections across that interval. The approximately 40 ps continuous voltage-adjustment window provides finer resolution than the digital control and can be useful for production calibration, clock-tree compensation, or fine phase correction.

The SY89296UTG operates as a 2.5 V/3.3 V PECL delay-line device. PECL interfacing places the part in high-speed clock and timing systems where terminated differential-style biasing and controlled impedance are common. The 32-pin TQFP surface-mount package supports conventional PCB assembly while providing separate connections for the programmable control and delay element. Exact control-logic levels, input-output impedance, temperature range, and recommended circuitry should be confirmed in the manufacturer's product documentation before layout release.

Typical applications include clock-data recovery, high-speed interface timing compensation, data acquisition systems, communication equipment, instrumentation, and industrial control. In a clock distribution design, the programmable taps can align a forwarded clock with a data path, while the continuous control can compensate for board-level propagation differences. The device can also provide a calibrated delay for test and measurement systems where repeatable timing relationships are required.

PCB implementation should preserve the impedance environment required by the PECL interface and place decoupling and termination components close to their associated pins. Because the digital tap selection and analog trim control serve different purposes, firmware and calibration procedures should record the final control settings rather than relying only on a nominal delay code. This page combines manufacturer specifications, procurement information, packaging details, and application guidance to support initial design evaluation.

ドロップイン代替品: SY89296UTG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

SY89296UTG 仕様

Product Type Programmable delay-line IC
Number of Taps 1024 taps
Minimum Delay 3.2 ns
Maximum Delay 14.8 ns
Digital Delay Increment 10 ps
Continuous Voltage Adjustment Range Approximately 40 ps
Logic Family 2.5 V/3.3 V PECL
Number of Delay Inputs 1 input
パッケージ 32-pin TQFP
Package Dimensions 7 mm x 7 mm
実装タイプ Surface mount
Programming Interface Digital control signal with analog voltage trim

SY89296UTG 7 mm x 7 mm ピン配置ガイド

SY89296UTG (7 mm x 7 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

SY89296UTG の 7 mm x 7 mm パッケージピン配置図

詳細なピン配置データはありません: SY89296UTG.

詳細は データシート をご参照ください。

主な用途

SY89296UTG の用途: 6 件s: Clock Alignment and Phase Compensation, Clock and Data Recovery Systems, High-Speed Interface Timing Compensation, Data Acquisition and Instrumentation, Telecommunications Timing Networks, Industrial Control and Timing Calibration.

🌐

Clock Alignment and Phase Compensation

The SY89296UTG fits clock-alignment systems that require a controllable delay between a reference clock and a forwarded or recovered data-related signal. Its 1024 taps cover a 3.2 ns to 14.8 ns range with 10 ps nominal digital increments, while approximately 40 ps of voltage-controlled adjustment supports finer phase compensation. A system controller can select a tap code during initialization and then use the analog control for production calibration. The principal design constraint is preserving the PECL signal environment and including the full 11.6 ns adjustment span plus calibration margin in the board-level timing budget.

🖥️

Clock and Data Recovery Systems

The SY89296UTG can provide programmable timing adjustment in clock-and-data recovery designs where a recovered clock must be aligned with parallel data or a forwarded reference. The 10 ps tap increment permits systematic deskew across a 3.2 ns to 14.8 ns delay range, making it useful for board skew compensation and system-level phase tuning. Continuous adjustment over approximately 40 ps can refine alignment after digital selection. Designers should confirm propagation-delay tolerance, jitter, input/output levels, and supply requirements in the Microchip SY89296 documentation before treating the delay settings as production timing guarantees.

⚡

High-Speed Interface Timing Compensation

The SY89296UTG is applicable to high-speed interfaces that require deliberate timing skew rather than a fixed propagation delay. By choosing among 1024 taps, a system can compensate for connector, cable, board-routing, or source-to-sink timing differences across a documented 3.2 ns to 14.8 ns span. The approximately 40 ps analog trim range enables finer final alignment without changing the digital delay code. For reliable implementation, engineers must follow the recommended PECL termination and decoupling arrangement, maintain controlled impedance on delay-signal paths, and validate edge quality in the completed board configuration.

🔧

Data Acquisition and Instrumentation

The SY89296UTG fits precision data-acquisition and instrumentation systems that need a repeatable, user-selectable delay for sampling, triggering, or calibration sequences. The digital tap interface permits systematic delay codes across 3.2 ns to 14.8 ns, while the approximately 40 ps continuous control can support fine adjustment during instrument calibration. This combination can replace a large set of fixed-delay components and simplify timing configuration across multiple instrument modes. For laboratory and industrial equipment, verify the device's specified temperature range, jitter, propagation tolerance, and supply behavior before incorporating it into a precision measurement path.

🌐

Telecommunications Timing Networks

The SY89296UTG can be used in telecommunications timing networks that need programmable delay for path balancing, phase alignment, or interface calibration. Its 1024 digital taps and 10 ps increments provide fine control across an 11.6 ns span, while the approximately 40 ps continuous adjustment range allows calibration after coarse tap selection. The 2.5 V/3.3 V PECL interface makes the device relevant to high-speed clocking environments. Actual deployment requires attention to PECL biasing, controlled-impedance routing, supply sequencing, device temperature rating, and system-level jitter contribution during hardware qualification.

🏭

Industrial Control and Timing Calibration

The SY89296UTG is suitable for industrial control systems that coordinate deterministic event timing across sensors, actuators, and communication links. Programmable delay can compensate for propagation differences introduced by wiring, isolation boundaries, or long printed-circuit-board routes. The 1024-tap digital control provides repeatable coarse and fine positioning from 3.2 ns to 14.8 ns, while the approximately 40 ps voltage adjustment supports calibration after assembly. Because industrial systems may impose extended-temperature requirements, engineers should confirm the manufacturer's operating-temperature limits and environmental qualification before approving the device for production.

What is the SY89296UTG?
The SY89296UTG is a Microchip Technology programmable delay-line IC with 1024 taps, a digitally controlled delay range from 3.2 ns to 14.8 ns, and 10 ps nominal increments. According to the Microchip SY89296 product page, its delay can also be varied continuously through approximately 40 ps by applying a voltage to the analog control input. The device is packaged in a 32-pin TQFP and is intended for precision clock and signal-timing applications.
What is the delay range of SY89296UTG?
The SY89296UTG provides a digitally selectable delay from 3.2 ns to 14.8 ns, giving an 11.6 ns programmable span across 1024 taps. The manufacturer specifies 10 ps increments for digital control and an additional continuous adjustment range of approximately 40 ps using voltage control. These values are stated on the Microchip SY89296 product page and should be used as the initial timing-budget parameters during system design.
How many taps does SY89296UTG have?
The SY89296UTG contains 1024 digitally selectable delay taps. Its documented digital adjustment step is 10 ps, while the complete delay range extends from 3.2 ns to 14.8 ns. The 1024-tap architecture is useful when a system requires repeatable logic-selectable timing adjustments rather than a fixed delay. The manufacturer describes both digital selection and approximately 40 ps of continuous voltage adjustment.
Can the SY89296UTG delay be adjusted continuously?
Yes. The SY89296UTG supports continuous delay adjustment over an approximately 40 ps range by setting the voltage on its analog control input. This fine adjustment complements the 10 ps digital tap increments and the broader 3.2 ns to 14.8 ns digital range. According to the Microchip SY89296 product page, the combined control method is useful when production calibration or fine phase compensation is needed.
What interface standard does SY89296UTG use?
The SY89296UTG is identified as a 2.5 V/3.3 V PECL delay line. PECL is a high-speed bipolar logic family commonly used in clock distribution, telecommunications, and data-acquisition systems. The manufacturer listing identifies the interface family, while detailed input thresholds, output levels, termination requirements, and supply limits should be taken from the Microchip SY89296 technical documentation before final schematic and PCB design.
Where can I download the SY89296UTG datasheet?
The official SY89296UTG technical information is available through the Microchip Technology SY89296 product page at https://www.microchip.com/en-us/product/SY89296. From that page, open the device documentation to obtain the datasheet and associated product information. It is the preferred source for electrical characteristics, pin descriptions, recommended application circuits, and package drawings because distributor summaries may omit important timing and interface details.
Where can I find the SY89296UTG pinout?
The SY89296UTG pinout and pin descriptions should be obtained from the pin-description table and package drawing in the Microchip SY89296 documentation. The component uses a 32-pin TQFP package, but a complete numbered pin map is not reproduced on this page because the manufacturer documentation does not expose those assignments in the product summary. Use the official pin table when assigning power, ground, data-control, analog-trim, and delay-signal connections.
What package does SY89296UTG use?
The SY89296UTG is supplied in a 32-pin TQFP package measuring 7 mm by 7 mm. Distributor and manufacturer listings consistently identify the surface-mount package, and the SY89296UTG ordering information also identifies tray packaging. Use the manufacturer's package drawing and land-pattern guidance when defining the PCB footprint, solder mask, paste layers, and assembly orientation.
Is SY89296UTG suitable for clock alignment?
Yes. The SY89296UTG is suitable for clock alignment because it offers 1024 digitally selectable taps, 10 ps nominal increments, and approximately 40 ps of continuous voltage adjustment. These controls allow a clock or data-related signal to be aligned with greater granularity than a fixed-delay component permits. The final implementation must also account for the device's 2.5 V/3.3 V PECL interface, controlled-impedance routing, and the total board timing budget.
Where can I buy SY89296UTG and request a quote?
Use the Request a Quote form on this page to request current availability, MOQ, lead time, and commercial terms for the exact Microchip Technology SY89296UTG ordering code. The product is identified as active and is listed in a tray package. Commercial terms can vary with quantity and supply status, so the quote form is the appropriate route for a current, configuration-specific commitment rather than relying on a stale listing figure.
What is the lead time for SY89296UTG?
The current lead time for SY89296UTG should be requested through the Request a Quote form on this page using the exact MPN SY89296UTG. A meaningful commitment depends on the requested quantity, package configuration, and supply status at the time of order. The device is marked active, but active lifecycle status alone does not establish a guaranteed delivery interval for every production order.
Is SY89296UTG in stock?
Current SY89296UTG stock should be confirmed through the Request a Quote form on this page. The part is listed as active and is offered in a 32-pin TQFP tray, but availability can change with order quantity and replenishment cycles. Submit the exact MPN and required quantity to obtain the most current allocation and lead-time information for the intended build.
What is the best drop-in replacement for SY89296UTG?
No independently validated drop-in replacement for SY89296UTG is established by the available technical information. The SY89296UTG-TR ordering code represents the same electrical device in tape-and-reel packaging, but it is a packaging option rather than a distinct drop-in alternative. Because replacement decisions require identical package geometry, pin functions, logic levels, delay range, control encoding, and timing performance, use the manufacturer's cross-reference search or request engineering confirmation before approving another part.
Can SY89296UTG-TR replace SY89296UTG?
The SY89296UTG-TR can provide the same device function as SY89296UTG, but its primary difference is reel packaging rather than electrical configuration. SY89296UTG is identified with tray packaging, while the -TR ordering code is identified with tape-and-reel packaging. Existing boards can therefore accommodate the same device architecture, but the assembly and inbound-reel process may differ; confirm the manufacturer ordering information before treating the two suffixes as interchangeable.
What can replace SY89296UTG?
The only directly related ordering option identified is SY89296UTG-TR, which changes the delivery format from tray to tape and reel while retaining the SY89296U device family. A broader functional replacement cannot be recommended without verified pin mapping, control-code compatibility, supply voltage, PECL thresholds, delay range, and timing specifications. Use the Microchip cross-reference search, then validate any candidate against the manufacturer's SY89296 documentation and your system's timing budget.
What are the key specifications of SY89296UTG engineers should know?
The key SY89296UTG specifications are 1024 taps, a 3.2 ns minimum delay, a 14.8 ns maximum delay, 10 ps digital increments, approximately 40 ps of continuous voltage adjustment, a 2.5 V/3.3 V PECL interface, and a 32-pin TQFP package. These figures define its useful resolution and total adjustment span. Detailed supply limits, temperature range, propagation tolerance, and jitter must be checked in the manufacturer's datasheet before release.

エンジニアリング参考データ: SY89296UTG — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the SY89296UTG when the design requires a programmable 3.2 ns to 14.8 ns delay with 1024 digitally selectable taps, 10 ps nominal increments, and approximately 40 ps of continuous voltage adjustment in a 32-pin TQFP package. It is particularly suitable for clock alignment, recovered-clock deskew, high-speed interface compensation, and calibrated instrumentation. SY89296UTG-TR may serve the same electrical design when tape-and-reel assembly is required, but it is a packaging order option rather than a distinct functional substitute. No cross-brand drop-in alternative is recommended because an equivalent must reproduce the pin functions, control encoding, delay range, PECL electrical characteristics, timing behavior, and 32-pin footprint. If those requirements cannot be met, treat the device as function-specific and use the manufacturer's cross-reference process to identify candidates for engineering review rather than assuming footprint similarity is sufficient.

代替品との比較

パラメータ この製品
Brand Microchip Technology
Package 32-pin TQFP, 7 mm x 7 mm
Product Type Programmable delay-line IC
Number of Taps 1024 taps
Minimum Delay 3.2 ns
Maximum Delay 14.8 ns
Digital Delay Increment 10 ps
Continuous Adjustment Range Approximately 40 ps
Logic Interface 2.5 V/3.3 V PECL
Number of Delay Inputs 1 input
Mounting Type Surface mount

設計ノート

Route the delay-signal paths as controlled-impedance traces and place PECL biasing or termination components close to the relevant device pins. Keep the digital control and analog trim nets away from the clock or delay path where practical to reduce coupling into the timing signal. Follow the manufacturer's recommended decoupling arrangement and land pattern in the SY89296 documentation.

Budget the complete selectable delay of 3.2 ns to 14.8 ns, plus approximately 40 ps of continuous trim, against the receiving device's setup and hold requirements. Do not rely on tap selection alone as proof of interface timing; include propagation tolerance, jitter, clock-quality effects, and board skew in the system analysis. Verify the finished design with the intended signal rates and loading.

Treat the digital tap selection and the analog voltage trim as separate calibration controls. Record the tap code and trim voltage for each operating condition so production units can be configured reproducibly. Avoid assuming that equal tap increments guarantee exact absolute delay at every temperature or supply condition; use the manufacturer's characterization limits and an end-of-line calibration procedure where required.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The available product summaries do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The SY89296UTG is described as an active Microchip Technology part.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

SY89296UTG datasheet SY89296UTG pinout SY89296UTG datasheet pdf SY89296UTG specifications SY89296UTG delay range SY89296UTG 1024 tap SY89296UTG TQFP-32 SY89296UTG clock alignment SY89296UTG equivalent SY89296UTG replacement SY89296UTG price SY89296UTG stock Microchip SY89296UTG SY89296UTG application circuit

関連部品&用語

Microchip Technology SY89296UTG SY89296 SY89296UTG-TR programmable delay line delay-line IC clock and timing integrated circuit semiconductor PECL 2.5 V/3.3 V PECL 1024 taps 3.2 ns minimum delay 14.8 ns maximum delay 10 ps delay increment 40 ps continuous adjustment TQFP-32 TQFP package family surface-mount package clock alignment clock-data recovery phase compensation high-speed interface controlled impedance data acquisition industrial control
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示