SY89296UTG - 1024-Tap Programmable Delay Line | Microchip
MPN: SY89296UTG ✓ فعالSY89296UTG نمای کلی
A programmable delay line is a timing IC that propagates an input signal through a controlled number of delay elements. It belongs to the delay-line and timing-element hierarchy within clock and timing integrated circuits. Instead of relying on a fixed propagation delay, the SY89296UTG allows a system controller to select the delay digitally and apply an additional analog trim. This combination supports calibration, phase alignment, skew adjustment, and timing compensation in systems where fixed-delay components would require several alternative part numbers.
The primary feature set includes 1024 selectable taps, a 3.2 ns minimum delay, a 14.8 ns maximum delay, and 10 ps digital increments. The total range spans 11.6 ns, allowing 1024 evenly spaced selections across that interval. The approximately 40 ps continuous voltage-adjustment window provides finer resolution than the digital control and can be useful for production calibration, clock-tree compensation, or fine phase correction.
The SY89296UTG operates as a 2.5 V/3.3 V PECL delay-line device. PECL interfacing places the part in high-speed clock and timing systems where terminated differential-style biasing and controlled impedance are common. The 32-pin TQFP surface-mount package supports conventional PCB assembly while providing separate connections for the programmable control and delay element. Exact control-logic levels, input-output impedance, temperature range, and recommended circuitry should be confirmed in the manufacturer's product documentation before layout release.
Typical applications include clock-data recovery, high-speed interface timing compensation, data acquisition systems, communication equipment, instrumentation, and industrial control. In a clock distribution design, the programmable taps can align a forwarded clock with a data path, while the continuous control can compensate for board-level propagation differences. The device can also provide a calibrated delay for test and measurement systems where repeatable timing relationships are required.
PCB implementation should preserve the impedance environment required by the PECL interface and place decoupling and termination components close to their associated pins. Because the digital tap selection and analog trim control serve different purposes, firmware and calibration procedures should record the final control settings rather than relying only on a nominal delay code. This page combines manufacturer specifications, procurement information, packaging details, and application guidance to support initial design evaluation.
جایگزینهای drop-in برای SY89296UTG — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینSY89296UTG مشخصات
| Product Type | Programmable delay-line IC |
| Number of Taps | 1024 taps |
| Minimum Delay | 3.2 ns |
| Maximum Delay | 14.8 ns |
| Digital Delay Increment | 10 ps |
| Continuous Voltage Adjustment Range | Approximately 40 ps |
| Logic Family | 2.5 V/3.3 V PECL |
| Number of Delay Inputs | 1 input |
| بستهبندی | 32-pin TQFP |
| Package Dimensions | 7 mm x 7 mm |
| نوع نصب | Surface mount |
| Programming Interface | Digital control signal with analog voltage trim |
راهنمای پیکربندی پین SY89296UTG 7 mm x 7 mm
پیکربندی پین برای SY89296UTG (پکیج 7 mm x 7 mm). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای SY89296UTG.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
SY89296UTG مناسب است برای 6 کاربردs: Clock Alignment and Phase Compensation, Clock and Data Recovery Systems, High-Speed Interface Timing Compensation, Data Acquisition and Instrumentation, Telecommunications Timing Networks, Industrial Control and Timing Calibration.
Clock Alignment and Phase Compensation
The SY89296UTG fits clock-alignment systems that require a controllable delay between a reference clock and a forwarded or recovered data-related signal. Its 1024 taps cover a 3.2 ns to 14.8 ns range with 10 ps nominal digital increments, while approximately 40 ps of voltage-controlled adjustment supports finer phase compensation. A system controller can select a tap code during initialization and then use the analog control for production calibration. The principal design constraint is preserving the PECL signal environment and including the full 11.6 ns adjustment span plus calibration margin in the board-level timing budget.
Clock and Data Recovery Systems
The SY89296UTG can provide programmable timing adjustment in clock-and-data recovery designs where a recovered clock must be aligned with parallel data or a forwarded reference. The 10 ps tap increment permits systematic deskew across a 3.2 ns to 14.8 ns delay range, making it useful for board skew compensation and system-level phase tuning. Continuous adjustment over approximately 40 ps can refine alignment after digital selection. Designers should confirm propagation-delay tolerance, jitter, input/output levels, and supply requirements in the Microchip SY89296 documentation before treating the delay settings as production timing guarantees.
High-Speed Interface Timing Compensation
The SY89296UTG is applicable to high-speed interfaces that require deliberate timing skew rather than a fixed propagation delay. By choosing among 1024 taps, a system can compensate for connector, cable, board-routing, or source-to-sink timing differences across a documented 3.2 ns to 14.8 ns span. The approximately 40 ps analog trim range enables finer final alignment without changing the digital delay code. For reliable implementation, engineers must follow the recommended PECL termination and decoupling arrangement, maintain controlled impedance on delay-signal paths, and validate edge quality in the completed board configuration.
Data Acquisition and Instrumentation
The SY89296UTG fits precision data-acquisition and instrumentation systems that need a repeatable, user-selectable delay for sampling, triggering, or calibration sequences. The digital tap interface permits systematic delay codes across 3.2 ns to 14.8 ns, while the approximately 40 ps continuous control can support fine adjustment during instrument calibration. This combination can replace a large set of fixed-delay components and simplify timing configuration across multiple instrument modes. For laboratory and industrial equipment, verify the device's specified temperature range, jitter, propagation tolerance, and supply behavior before incorporating it into a precision measurement path.
Telecommunications Timing Networks
The SY89296UTG can be used in telecommunications timing networks that need programmable delay for path balancing, phase alignment, or interface calibration. Its 1024 digital taps and 10 ps increments provide fine control across an 11.6 ns span, while the approximately 40 ps continuous adjustment range allows calibration after coarse tap selection. The 2.5 V/3.3 V PECL interface makes the device relevant to high-speed clocking environments. Actual deployment requires attention to PECL biasing, controlled-impedance routing, supply sequencing, device temperature rating, and system-level jitter contribution during hardware qualification.
Industrial Control and Timing Calibration
The SY89296UTG is suitable for industrial control systems that coordinate deterministic event timing across sensors, actuators, and communication links. Programmable delay can compensate for propagation differences introduced by wiring, isolation boundaries, or long printed-circuit-board routes. The 1024-tap digital control provides repeatable coarse and fine positioning from 3.2 ns to 14.8 ns, while the approximately 40 ps voltage adjustment supports calibration after assembly. Because industrial systems may impose extended-temperature requirements, engineers should confirm the manufacturer's operating-temperature limits and environmental qualification before approving the device for production.
دادههای مرجع مهندسی برای SY89296UTG — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Brand | Microchip Technology |
| Package | 32-pin TQFP, 7 mm x 7 mm |
| Product Type | Programmable delay-line IC |
| Number of Taps | 1024 taps |
| Minimum Delay | 3.2 ns |
| Maximum Delay | 14.8 ns |
| Digital Delay Increment | 10 ps |
| Continuous Adjustment Range | Approximately 40 ps |
| Logic Interface | 2.5 V/3.3 V PECL |
| Number of Delay Inputs | 1 input |
| Mounting Type | Surface mount |
یادداشتهای طراحی
Route the delay-signal paths as controlled-impedance traces and place PECL biasing or termination components close to the relevant device pins. Keep the digital control and analog trim nets away from the clock or delay path where practical to reduce coupling into the timing signal. Follow the manufacturer's recommended decoupling arrangement and land pattern in the SY89296 documentation.
Budget the complete selectable delay of 3.2 ns to 14.8 ns, plus approximately 40 ps of continuous trim, against the receiving device's setup and hold requirements. Do not rely on tap selection alone as proof of interface timing; include propagation tolerance, jitter, clock-quality effects, and board skew in the system analysis. Verify the finished design with the intended signal rates and loading.
Treat the digital tap selection and the analog voltage trim as separate calibration controls. Record the tap code and trim voltage for each operating condition so production units can be configured reproducibly. Avoid assuming that equal tap increments guarantee exact absolute delay at every temperature or supply condition; use the manufacturer's characterization limits and an end-of-line calibration procedure where required.
اطلاعات انطباق
The available product summaries do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The SY89296UTG is described as an active Microchip Technology part.