Microchip Technology

SY89464UMG - 2:10 2 GHz LVPECL Clock Multiplexer | Microchip

部品番号: SY89464UMG ✓ 生産中
44-VFQFN exposed pad, 44-MLF Package 2 GHz Speed
MOQ: 1 |

SY89464UMG 概要

The Microchip Technology SY89464UMG is a 2:10 differential clock multiplexer and 1:10 LVPECL fanout buffer operating up to 2 GHz, housed in a 44-VFQFN exposed-pad package. It accepts CML, LVDS, or PECL differential inputs and provides differential LVPECL outputs. The SY89464U architecture combines a 2:1 differential input multiplexer with ten output channels, allowing one of two clock sources to be selected and distributed without changing the output interface.

A clock multiplexer is a timing-device category used to route one of multiple clock signals onto a downstream circuit while preserving differential signal integrity. Clock buffers extend a source across multiple loads, while a multiplexer adds source selection for redundant systems. The SY89464UMG therefore combines clock distribution and source switching in one timing IC, placing it within the hierarchy of clock multiplexer, clock buffer, clock and timing IC, and semiconductor.

Key features include a 2:10 multiplexer configuration, operation to 2 GHz, differential input support, differential LVPECL outputs, low-jitter operation, internal termination, and a runt-pulse eliminator. The 2:1 input stage is optimized for redundant-source switchover, where a system may switch between primary and backup clocks. Its ten outputs support fanout to multiple destination circuits while retaining a common differential LVPECL interface.

The SY89464U combines source selection with a 1:10 fanout stage rather than functioning as a simple single-input distributor. The manufacturer describes the product as a low-jitter 1:10 LVPECL fanout buffer with a 2:1 differential input multiplexer. Differential signal handling is particularly useful when the clock path must remain resistant to common-mode noise. The internal termination and runt-pulse elimination features help control reflection and unwanted narrow pulses in demanding backplane, telecommunications, and data-center clocking systems.

Typical uses include redundant clock distribution in telecommunications equipment, server backplanes, network switches, test and measurement systems, and high-speed digital subsystems. A 2 GHz operating limit supports high-speed reference or forwarded clocks, while the ten LVPECL outputs can feed several endpoints from one selected source. The 44-VFQFN exposed-pad package provides the thermal-contact geometry needed for a multi-output high-speed device, although system-level thermal performance still depends on the PCB pad and copper design.

PCB implementation should preserve differential impedance and minimize mismatch between the complementary clock traces. Place input and output decoupling near the corresponding device pins, provide a continuous ground reference, and connect the exposed pad to a properly designed ground plane using the manufacturer’s recommended land pattern. Differential input and output traces should have equal length and geometry, with return-path discontinuities minimized. Validate source-switchover timing, output jitter, and runt-pulse behavior at the intended clock frequency in the final system.

This page consolidates the functional description, package information, sourcing guidance, verified drop-in relationship, and practical implementation considerations for the SY89464UMG. It is intended to help engineers identify whether the part fits a redundant differential-clock architecture before consulting the manufacturer datasheet and pin-description table for final PCB implementation.

ドロップイン代替品: SY89464UMG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: SY89464UMG (同一形状・フットプリント) — 相違点: Output Configuration, Package.

Microchip Technology
Output Configuration: 10 LVPECL outputs
Package: 44-pin VFQFN with exposed pad
比較対象 SY89464UMG →

SY89464UMY

✅ ドロップイン
Microchip Technology
📦 44-VFQFN exposed pad, 44-MLF
2:10 differential clock multiplexer and 1:10 LVPECL fanout buffer · 2 GHz · 2 differential inputs · 10 LVPECL outputs · 2:1 · 1:10 · 800 mV LVPECL · 100 ohm

価格はお問い合わせください

データシートを見る →

SY89464UMG 仕様

Product Type 2:10 differential clock multiplexer and 1:10 LVPECL fanout buffer
Multiplexer Configuration 2:1 differential input multiplexer
出力構成 1:10 fanout
Maximum Operating Frequency 2 GHz
Input Signal Types CML, LVDS, and PECL differential inputs
Output Signal Type Differential LVPECL
Jitter Performance Low-jitter operation
Input Termination Internal termination
Pulse Control Runt-pulse eliminator
Primary Application Redundant source switchover
パッケージ 44-VFQFN exposed pad, 44-MLF
ピン数 44 pins
実装タイプ Surface mount

SY89464UMG 44-vfqfn exposed pad, 44-mlf ピン配置ガイド

SY89464UMG (44-vfqfn exposed pad, 44-mlf パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

SY89464UMG の 44-vfqfn exposed pad, 44-mlf パッケージピン配置図

詳細なピン配置データはありません: SY89464UMG.

詳細は データシート をご参照ください。

主な用途

SY89464UMG の用途: 6 件s: Redundant Server Clock Distribution, Telecommunications Backplane Clocking, Network Switch Reference Distribution, High-Speed Test and Measurement Equipment, Data Center Fabric Clocking, Industrial High-Speed Control Systems.

🖥️

Redundant Server Clock Distribution

The SY89464UMG fits redundant server clocking because its 2:1 differential input multiplexer can select between two clock sources and feed ten differential LVPECL outputs. The device operates up to 2 GHz, allowing one selected reference to reach multiple server, fabric, or interface clock domains. Low-jitter operation, internal termination, and runt-pulse elimination help preserve timing quality during source selection. The 44-VFQFN exposed pad also provides a practical thermal path when several high-speed outputs operate continuously.

🌐

Telecommunications Backplane Clocking

In telecommunications backplanes, the SY89464UMG can select a primary or backup differential clock and distribute it to ten downstream LVPECL destinations. Its support for CML, LVDS, and PECL inputs allows different clock sources to interface with the same multiplexing stage, while differential outputs reduce sensitivity to common-mode noise on long interconnects. Operation to 2 GHz and the low-jitter 1:10 fanout architecture suit high-speed line cards, switching fabrics, and timing-distribution systems requiring deterministic source redundancy.

🌐

Network Switch Reference Distribution

The SY89464UMG is suitable for distributing a selected reference clock across a network-switch line card. Its two differential inputs support failover between clock sources, and its ten LVPECL outputs provide one-to-ten fanout without requiring ten separate buffer packages. The 2 GHz maximum operating frequency covers demanding SerDes and fabric reference-clock environments. Internal termination and the runt-pulse eliminator improve signal control, although the board must maintain continuous return paths and matched differential geometry.

🔧

High-Speed Test and Measurement Equipment

The SY89464UMG can serve as a redundant reference and fanout element in high-speed test and measurement systems. Two selectable differential inputs allow the instrument to switch between an internal reference and an external clock, while ten LVPECL outputs can feed trigger, acquisition, or calibration circuits. Its low-jitter operation and 2 GHz capability suit high-speed timing systems. The exposed-pad package should be paired with a thermal-aware via array and sufficient copper to dissipate heat from sustained multi-output operation.

🖥️

Data Center Fabric Clocking

The SY89464UMG fits data-center fabric clocking where multiple endpoints require a common, selectable differential clock. The 2:1 multiplexer provides a transition path between redundant sources, and the 1:10 fanout reduces the number of separate distribution buffers required around the fabric interface. Differential LVPECL outputs maintain a consistent interface across up to ten loads at frequencies as high as 2 GHz. Designers should still verify per-output loading, channel skew, jitter contribution, and power distribution for each particular system architecture.

🏭

Industrial High-Speed Control Systems

The SY89464UMG can support source redundancy in industrial systems that distribute a high-speed clock to multiple controllers, converters, or communication blocks. CML, LVDS, and PECL differential input options make it practical to combine clock sources from different interface sections, and ten LVPECL outputs provide centralized fanout. The low-jitter architecture and 2 GHz limit are valuable when timing margins are tight. Its exposed-pad package requires careful PCB thermal design because sustained fanout operation can raise junction temperature in compact industrial enclosures.

What are the key specifications of SY89464UMG that engineers should know?
The SY89464UMG is a 2:10 clock multiplexer with a maximum operating frequency of 2 GHz, differential inputs, and differential LVPECL outputs. According to the Micrel Semiconductor product description, it is a low-jitter 1:10 LVPECL fanout buffer with a 2:1 differential input multiplexer, internal termination, and a runt-pulse eliminator. It is packaged in a 44-VFQFN exposed-pad configuration for high-speed differential clock distribution and redundant-source switchover.
What is the operating frequency of the SY89464UMG?
The Microchip Technology SY89464UMG operates up to 2 GHz. According to the manufacturer product description, the device combines a 2:1 differential input multiplexer with a 1:10 low-jitter LVPECL fanout stage. This frequency rating applies to the component’s intended high-speed clock operation, while final timing margin must be evaluated using the complete circuit, source impedance, PCB routing, loading, and selected clock waveform.
What type of clock multiplexer is SY89464UMG?
The SY89464UMG is a 2:10 differential clock multiplexer with a 2:1 input selection stage and ten fanout outputs. According to the Micrel Semiconductor datasheet description, the output stage provides differential LVPECL and the multiplexer is optimized for redundant source switchover. It therefore supports selecting either of two differential clock inputs and distributing the selected clock across ten outputs.
What input and output signal formats does SY89464UMG support?
The SY89464UMG accepts CML, LVDS, and PECL differential inputs and produces differential LVPECL outputs. According to the Microchip Technology product information, the device includes differential inputs and outputs, internal termination, and a 1:10 fanout architecture. The supported input formats give the multiplexer flexibility when receiving clocks from different high-speed logic families, while a common LVPECL output interface simplifies distribution to downstream circuitry.
Where can I download the SY89464UMG datasheet PDF?
The SY89464UMG datasheet can be accessed through the Microchip document listing and the Micrel Semiconductor datasheet page linked in this product’s document resources. The manufacturer document covers the device’s 2:1 differential multiplexer, 1:10 LVPECL fanout, supported input formats, and 44-VFQFN implementation. Use the manufacturer’s pin-description table when assigning tracks, and use the application information to confirm supply, termination, and decoupling requirements.
Where can I find the SY89464UMG pinout?
The SY89464UMG pin assignments are located in the pin-description table of the manufacturer datasheet. The component uses a 44-VFQFN exposed-pad, 44-MLF package with 44 numbered positions. Do not infer individual signal names from the general clock-buffer description because differential inputs, ten LVPECL output channels, power pins, termination controls, and the exposed thermal pad require exact datasheet-based assignment during PCB layout.
What can replace the SY89464UMG on the same PCB footprint?
SY89464UMY is the verified same-footprint replacement identified for the SY89464UMG. Its comparison listing states that the terminals and packages are consistent and that its main performance parameters and functional characteristics match, so replacement does not require footprint modification. No additional cross-manufacturer drop-in candidates were established, and any substitution should still be checked against supply requirements and the latest manufacturer documentation.
Can SY89464UMY replace SY89464UMG without PCB changes?
Yes, SY89464UMY can serve as a drop-in replacement for SY89464UMG according to the verified component comparison. Both use a 44-VFQFN package, and the comparison identifies consistent terminals, packages, main performance parameters, and functional characteristics. Before production use, confirm the ordering suffix, temperature grade, supply configuration, and current manufacturer documentation for the selected SY89464UMY variant.
Is SY89464UMG the same as SY89464UMY?
The SY89464UMG and SY89464UMY are functionally and package-compatible according to the verified component comparison. The comparison states that their main performance parameters and functional characteristics are consistent and that their terminals and packages are identical. The difference is therefore presented as an ordering or supply variant rather than a required circuit redesign, subject to confirmation of the exact suffix and grade before procurement.
When should I choose SY89464UMG over another clock multiplexer?
Choose the SY89464UMG when a design requires two selectable differential clock sources, ten LVPECL distribution outputs, and operation up to 2 GHz in a 44-VFQFN package. Its 2:1 input multiplexer, internal termination, low-jitter fanout, and runt-pulse eliminator make it especially relevant to redundant-source architectures. Choose SY89464UMY when equivalent functionality and the same footprint are needed with a different ordering designation.
Is SY89464UMG suitable for redundant server clocking?
The SY89464UMG is suitable for redundant clock architectures because it includes a 2:1 differential input multiplexer optimized for source switchover and distributes the selected clock through ten differential LVPECL outputs. According to the manufacturer description, low jitter, internal termination, and runt-pulse elimination support robust high-speed distribution. Final suitability depends on the required switchover interval, jitter budget, output loading, and thermal design of the completed system.
How should SY89464UMG be handled in a differential clock PCB layout?
Route each differential clock pair as a controlled-impedance, length-matched structure with a continuous ground reference. Place input and output bypass capacitors near their associated pins, minimize vias and stubs, and preserve the manufacturer’s recommended 44-VFQFN exposed-pad land pattern. According to the manufacturer application guidance, differential return-path continuity and symmetrical geometry are essential for preserving the intended low-jitter, low-reflection behavior of the LVPECL clock outputs.
Where can I buy SY89464UMG and check its current lead time?
Use the Request a Quote form on this page to request current SY89464UMG availability, pricing, and lead time. The quote form is the appropriate channel for a quote-based electronic-component purchase and allows the requested package, quantity, and delivery requirements to be reviewed. Do not use historical or family-level pricing as a substitute for a current quotation for the exact 44-VFQFN ordering code.
What is the current price of SY89464UMG?
The current SY89464UMG price is not reproduced as a static value because electronic-component pricing changes with quantity, availability, and market conditions. Submit the Request a Quote form on this page with the required quantity and target 44-VFQFN ordering code for a current quotation. This approach avoids presenting an obsolete single-unit price or a price that applies to a different package, temperature grade, or packing option.
Is SY89464UMG in stock and what is its lead time?
Current stock and lead time for the exact SY89464UMG ordering code should be confirmed through the Request a Quote form on this page. The Request a Quote workflow lets you state the required quantity, delivery schedule, and exact package variant so availability can be evaluated against your production plan. A current listing confirms the component is marketed, but it should not be interpreted as a guaranteed warehouse stock quantity without a quotation.
What is the best Microchip equivalent for SY89464UMG?
SY89464UMY is the best verified Microchip equivalent identified for the SY89464UMG because the component comparison describes consistent terminals, packages, main performance parameters, and functional characteristics. It can replace the SY89464UMG without changing the 44-VFQFN footprint. No cross-manufacturer equivalent was confirmed, so SY89464UMY is the appropriate drop-in candidate based on the available compatibility information.

エンジニアリング参考データ: SY89464UMG — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the SY89464UMG for a redundant differential-clock architecture that must select between two sources and distribute the selected signal to ten LVPECL outputs. Its 2 GHz operating limit, low-jitter fanout, internal termination, and runt-pulse eliminator make it appropriate for high-speed backplanes, server fabrics, network line cards, and test systems. Choose SY89464UMY when the verified comparison’s consistent terminals, package, and functional characteristics make it a suitable drop-in ordering alternative. Confirm the exact suffix and grade before committing either part to production. No cross-manufacturer drop-in candidate was established, so a different manufacturer should not be assumed interchangeable without a separate package, pin-function, timing, and signal-integrity review.

代替品との比較

パラメータ この製品 SY89464UMY
Brand Microchip Technology Microchip Technology
Package 44-VFQFN exposed pad, 44-MLF 44-VFQFN exposed pad, 44-MLF
Product Function 2:10 clock multiplexer with 1:10 LVPECL fanout 2:10 clock multiplexer with 1:10 LVPECL fanout
Application Focus Redundant source switchover Redundant source switchover

主な差別化要因

  • Combines redundant-source selection with ten-output distribution (vs SY89464UMY)
  • Supports several differential source formats (vs SY89464UMY)
  • Includes signal-control features for redundant clocking (vs SY89464UMY)

設計ノート

Route the differential clock inputs and outputs as matched pairs over a continuous ground reference. Maintain equal geometry and controlled impedance for each P and N conductor, avoid stubs, and minimize layer changes because discontinuities can create reflections that increase jitter or trigger the runt-pulse eliminator unexpectedly. Confirm the final stack-up and trace dimensions against the manufacturer’s interface and layout guidance.

The 44-VFQFN exposed pad must be connected to a carefully designed thermal via array and ground copper to remove heat from the die. Keep nearby copper from encroaching on other sensitive routing unless the manufacturer land pattern explicitly permits it. Validate junction temperature under worst-case ambient conditions, full output loading, and sustained 2 GHz operation rather than relying only on a short bench test.

Check each clock source for valid differential amplitude, common-mode range, duty-cycle distortion, and edge-rate behavior before enabling the selected input. Because the device performs both source selection and 1:10 fanout, input return loss and output loading can influence edge quality. Use the manufacturer’s termination and output-loading requirements, and verify source-switchover behavior with the actual clock generators and final board parasitics.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance declarations for RoHS, REACH, AEC-Q100, lead-free status, halogen-free status, and conflict minerals were not identified in the product information. Check the current manufacturer product page or material declaration before procurement.

関連検索

SY89464UMG datasheet SY89464UMG pinout SY89464UMG datasheet pdf SY89464UMG equivalent SY89464UMG replacement SY89464UMG vs SY89464UMY SY89464UMG price SY89464UMG stock Microchip SY89464UMG SY89464UMG 44-VFQFN pinout SY89464UMG application circuit SY89464UMG 2 GHz clock multiplexer

関連部品&用語

Microchip Technology SY89464UMG SY89464UMY clock multiplexer clock buffer fanout buffer clock and timing IC semiconductor differential clock 2:1 multiplexer 1:10 fanout LVPECL CML LVDS PECL low jitter internal termination runt-pulse eliminator redundant source switchover 44-VFQFN 44-MLF exposed pad differential impedance 2 GHz
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示