Microchip Technology

SY89809LTC - 500 MHz 1:9 HSTL Clock Driver | Microchip

部品番号: SY89809LTC ✗ 生産終了
3.3 V Vdss 32-pin TQFP, 7 mm x 7 mm Package 500 MHz Speed
MOQ: 1 |

SY89809LTC 概要

The Microchip Technology SY89809LTC is a 3.3 V 1:9 high-performance bus clock driver with nine differential HSTL output pairs, designed for low-voltage systems operating at 3.3 V or 1.8 V. It operates up to 500 MHz and is packaged in a 32-pin TQFP. The device includes one clock input and nine differential outputs, making it suitable for distributing a high-speed source clock across multiple loads in computer, communications, and test equipment systems.

A bus clock driver is a clock and timing integrated circuit that reproduces or buffers a clock signal while providing multiple outputs for system distribution. In the signal path, a clock buffer can increase fanout, isolate a source from downstream loading, and help maintain edge quality when driving multiple circuit groups. The SY89809LTC uses differential HSTL signaling, which supports robust high-speed transmission over controlled-impedance printed circuit board traces.

The key features of the SY89809LTC include a 1:9 fanout ratio, nine differential HSTL output pairs, a maximum operating frequency of 500 MHz, and compatibility with low-voltage 3.3 V and 1.8 V applications. The 32-pin TQFP package provides a surface-mount solution for compact systems requiring numerous clock outputs. The device is categorized as a clock fanout buffer and multiplexer with HSTL input and HSTL output.

Technically, the SY89809LTC is intended for high-performance bus-clock distribution rather than low-frequency general-purpose clock buffering. Differential clock distribution helps reduce sensitivity to common-mode noise on the PCB when trace impedance, pair spacing, and termination are controlled correctly. The 1:9 ratio allows one source clock to feed nine output pairs, reducing the number of separate buffering stages required in a multi-load clock tree.

Typical uses include processor clock distribution, memory-interface clock fanout, communications backplanes, test-and-measurement systems, and other high-speed digital platforms. In a processor or memory system, the device can distribute a central clock to several controller groups while limiting source loading. In communications equipment, the nine outputs can serve multiple modules or logical partitions, subject to the signal-integrity requirements of the complete board.

Design attention should be given to differential trace impedance, pair length matching, power-supply decoupling, and the electrical requirements of the connected HSTL devices. Place the device close to the clock source when the source has limited fanout capability, and route each differential pair as a controlled-impedance structure. Confirm the complete clock-tree topology and termination arrangement with the system-level timing and signal-integrity requirements.

This product page combines the manufacturer identification, package information, operating-frequency data, lifecycle information, application guidance, comparison fields, and verified source links for SY89809LTC. It is intended to help engineers establish the component identity, understand its clock-distribution role, and plan a qualified replacement or redesign review.

ドロップイン代替品: SY89809LTC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

SY89809LTC 仕様

Device Type Bus clock driver
Fanout Ratio 1:9
Number of Differential Output Pairs 9 pairs
Maximum Operating Frequency 500 MHz
電源電圧 3.3 V
Compatible Supply Voltage 1.8 V or 3.3 V
Input Logic HSTL
Output Logic Differential HSTL
Number of Circuits 1 circuit
パッケージ 32-pin TQFP, 7 mm x 7 mm
実装タイプ SMD (SMT)
動作温度範囲 0°C to 85°C
ライフサイクル状態 Obsolete (EOL)
Input Clock Count 1 input
Output Clock Count 9 differential output pairs
Product Class Clock fanout buffer, multiplexer

SY89809LTC 32-pin tqfp, 7 mm x 7 mm ピン配置ガイド

SY89809LTC (32-pin tqfp, 7 mm x 7 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

SY89809LTC の 32-pin tqfp, 7 mm x 7 mm パッケージピン配置図

詳細なピン配置データはありません: SY89809LTC.

詳細は データシート をご参照ください。

主な用途

SY89809LTC の用途: 6 件s: Processor Clock Fanout, Memory Interface Clock Distribution, Communications Backplane Distribution, Test and Measurement Equipment, Industrial Control Data Backplane, High-Speed Digital Backplane Clocking.

🖥️

Processor Clock Fanout

The SY89809LTC fits processor-clock trees that require one source signal to reach nine downstream logic groups. Its 1:9 fanout ratio can reduce the number of separate buffer stages, while the differential HSTL outputs support controlled-impedance routing at rates up to 500 MHz. Place the driver close to the source when source fanout is limited, and validate the clock topology against every receiver’s input capacitance and timing requirement. Because the device is obsolete, engineers should also review an approved lifecycle migration before committing it to a new platform.

🖥️

Memory Interface Clock Distribution

The nine differential HSTL output pairs make the SY89809LTC applicable to memory-oriented systems that distribute a central clock among several controller or interface groups. Operation up to 500 MHz provides a useful design ceiling for many synchronous memory and backplane applications, while the 1:9 ratio simplifies fanout. The implementation must use differential routing with the required HSTL reference and termination arrangement. Confirm receiver loading, clock duty-cycle distortion, skew, and board-level timing margins before release.

🌐

Communications Backplane Distribution

The SY89809LTC can distribute a common bus clock across multiple communications modules when the system uses HSTL and requires nine differential branches. Differential signaling helps maintain signal integrity over controlled-impedance PCB traces, and the 500 MHz maximum operating frequency supports high-speed digital architectures. Route output pairs away from noisy sources, maintain consistent pair geometry, and include the correct reference-plane transitions. Any change to the clock source, receiver standard, cable, or connector requires a new signal-integrity review.

🔧

Test and Measurement Equipment

The SY89809LTC is appropriate for test and measurement equipment that must fan one high-speed clock across multiple acquisition, control, or conversion sections. Its nine differential HSTL outputs can reduce clock-tree complexity and support distribution up to 500 MHz. Designers should evaluate deterministic and random jitter, duty-cycle distortion, output-to-output skew, return loss, and channel loss rather than relying only on the headline frequency. Use controlled-impedance routing and keep sensitive analog or timing circuitry outside noisy clock-return paths.

🏭

Industrial Control Data Backplane

In an industrial controller, the SY89809LTC can provide a common differential clock to several data-processing or communication blocks. The 1:9 ratio is useful when a backplane includes multiple bus-clock destinations, and the surface-mount 32-pin TQFP supports compact controller assemblies. Industrial temperature and lifecycle requirements should be checked independently from the stated 0°C to 85°C operating range. Because the component is obsolete, production continuation should depend on formal manufacturer guidance and a documented engineering change process.

🔧

High-Speed Digital Backplane Clocking

The SY89809LTC is suited to a high-speed digital backplane that requires nine differential HSTL clock branches from one central source. Its 500 MHz operating capability can support demanding synchronous routing while reducing clock-tree stage count. Correct use depends on preserving differential impedance, controlling pair skew, and terminating the HSTL network according to the system architecture. Validate source amplitude, receiver thresholds, loading, and worst-case cable or trace behavior before using the device as a drop-in design element in a new backplane.

What is the SY89809LTC?
The SY89809LTC is a Microchip Technology 1:9 bus clock driver with nine differential HSTL output pairs. According to the manufacturer description, it is a high-performance, low-voltage clock driver intended for 3.3 V and 1.8 V applications. The device distributes one clock source to nine differential outputs and supports operation up to 500 MHz.
What is the operating frequency of the SY89809LTC?
The SY89809LTC operates up to 500 MHz. The verified product description identifies it as a 3.3 V 1:9 differential HSTL clock driver, and distributor technical listings also classify the device as a 500 MHz clock fanout buffer. The 500 MHz figure is the headline operating-frequency specification used for system clock-tree design.
Where can I find the SY89809LTC datasheet PDF?
The SY89809LTC datasheet is available from the manufacturer-linked documentation listing at the datasheet URL on this page. The document describes the device as a 3.3 V 1:9 high-performance, low-voltage bus clock driver with nine differential HSTL output pairs. Use the pin-description and electrical-characteristics tables when assigning power, clock, and output connections.
Where can I find the SY89809LTC pinout?
The SY89809LTC pinout is documented in the manufacturer datasheet and its 32-pin TQFP pin-description table. Use that table to identify the supply pins, clock input, differential output pairs, and any ground or no-connect positions. The exact package drawing used by this page is marked as unavailable because the stored package library does not contain a verified 32-pin TQFP diagram.
How many clock outputs does the SY89809LTC provide?
The SY89809LTC provides nine differential HSTL output pairs from one input, giving it a 1:9 fanout ratio. This allows a single clock source to feed nine downstream destinations while preserving a differential signaling arrangement. The output count makes the device useful in systems that require multiple high-speed clock branches.
Is the SY89809LTC still active?
The SY89809LTC is listed as obsolete (EOL) in the verified product information. Because the device is not active, engineers should confirm the manufacturer’s lifecycle record and approved migration path before starting a new production design. For an existing supported system, compare any recommended replacement against frequency, voltage, logic standard, fanout, package, and pin compatibility.
Can the SY89809LTC be used in a 1.8 V system?
The SY89809LTC is designed for low-voltage applications supporting 3.3 V and 1.8 V operation. Its primary specified supply is 3.3 V, while the device description also identifies compatibility with 1.8 V applications. Confirm the exact supply arrangement, input thresholds, output levels, and decoupling values in the manufacturer datasheet before using it with 1.8 V-connected devices.
What is the difference between HSTL and LVPECL clocking?
HSTL uses a lower-voltage, source-terminated logic environment, while LVPECL uses a small voltage swing around a higher common-mode voltage. The SY89809LTC is specified with HSTL input and differential HSTL output operation, so it should be compared with other parts using the same logic family. The clock source, receiver thresholds, termination, and PCB impedance must all be compatible.
What is the best drop-in replacement for the SY89809LTC?
The best drop-in replacement must use the same 32-pin TQFP footprint, provide nine differential HSTL outputs, support a 1:9 fanout ratio, and operate up to 500 MHz at the intended supply voltage. No verified pin-to-pin replacement was identified in the available cross-reference results. Treat a generic clock-buffer substitution as a redesign until its pinout and electrical characteristics have been confirmed.
What can replace the SY89809LTC?
A replacement for the SY89809LTC should provide nine differential HSTL output pairs in a 32-pin TQFP and preserve the input and power connections. The available cross-reference search reported zero listed replacement products for this part. The most reliable path is to request a Microchip cross-reference recommendation and then validate timing, supply voltage, output levels, package geometry, and pin assignments.
Is the SY89809LTC suitable for memory and processor clock distribution?
The SY89809LTC is suitable for clock fanout where nine differential HSTL branches and operation up to 500 MHz meet the system requirements. Its 1:9 ratio reduces the need for multiple clock-buffer stages, while differential outputs suit controlled-impedance PCB routing. The final design must still pass source, receiver, loading, jitter, and timing checks for the connected controller or memory interfaces.
When should I choose the SY89809LTC over a smaller clock buffer?
Choose the SY89809LTC when the clock tree requires nine differential HSTL outputs from one input and must operate near the device’s 500 MHz capability. A smaller buffer is preferable when only a few loads exist, lower data rates are involved, or the required fanout and logic levels differ. The obsolete lifecycle status also favors a verified migration option for new designs.
How do I design the PCB layout for the SY89809LTC?
Route each differential HSTL output as a controlled-impedance pair with stable spacing and matched length where timing relationships require it. Place decoupling capacitors close to the supply pins and keep the clock input path short, especially when driving long traces. Confirm the HSTL reference plane, termination arrangement, and receiver loading with the complete board-level signal-integrity model.
Does the SY89809LTC require a heatsink?
The SY89809LTC is a clock and timing IC rather than a power-conversion device, and no heatsink requirement is identified in the product description. Thermal assessment should nevertheless consider supply voltage, clock activity, output loading, and the 32-pin TQFP construction. Confirm maximum operating conditions and package thermal information in the manufacturer datasheet before approving the board layout.
What are the key specifications of the SY89809LTC that engineers should know?
The key specifications are a 1:9 fanout ratio, nine differential HSTL output pairs, operation up to 500 MHz, a nominal 3.3 V supply, compatibility with 1.8 V and 3.3 V applications, and a 32-pin 7 mm x 7 mm TQFP package. The device is categorized as a clock fanout buffer and multiplexer, with an operating temperature range of 0°C to 85°C.

エンジニアリング参考データ: SY89809LTC — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the SY89809LTC only when the design specifically requires one clock input distributed to nine differential HSTL output pairs and the target system can operate within its documented 500 MHz capability. Its obsolete lifecycle status makes manufacturer-directed migration the primary concern: compare any proposed replacement for exact pin assignment, package geometry, supply voltage, logic thresholds, HSTL output levels, fanout behavior, and frequency. A generic clock buffer with nine outputs is not automatically interchangeable because its logic standard, reference arrangement, or output count may differ. For new designs, prefer a lifecycle-supported part after a complete application review. For existing equipment, use the documented SY89809LTC characteristics to preserve the current clock topology while the manufacturer’s replacement or migration path is evaluated.

代替品との比較

パラメータ この製品
Brand Microchip Technology
Package 32-pin TQFP, 7 mm x 7 mm
Device Type Bus clock driver
Fanout Ratio 1:9
Differential Output Pairs 9 pairs
Maximum Frequency 500 MHz
Nominal Supply Voltage 3.3 V
Input Logic HSTL
Output Logic Differential HSTL
Operating Temperature Range 0°C to 85°C

主な差別化要因

  • Provides nine differential clock branches from one source (vs No verified drop-in alternative)
  • Supports 500 MHz differential HSTL distribution (vs No verified drop-in alternative)
  • Combines nine outputs with a 32-pin TQFP footprint (vs No verified drop-in alternative)

設計ノート

Route all nine differential HSTL output pairs as controlled-impedance traces with consistent pair spacing and a continuous reference plane. Match pair length where the system requires minimized skew between clock destinations. Avoid splitting a differential pair across package or board layers, and keep the clock-input route short enough to avoid unnecessary attenuation before the first output branch.

Validate the complete HSTL network at the target clock frequency, including source amplitude, receiver thresholds, trace loss, loading, and termination. A 500 MHz clock leaves less margin for impedance discontinuities and excessive loading than a low-frequency clock. Use the manufacturer application guidance and system-level signal-integrity model to establish termination locations and acceptable output skew.

Place power-supply decoupling components close to the device supply pins and connect them to an appropriate ground reference with minimal loop area. Maintain short, direct clock-input routing and avoid coupling the input net to output and data nets. Check power sequencing, supply ramp behavior, and clock startup conditions in hardware because a static schematic review does not establish safe operating behavior.

Do not treat any generic nine-output clock buffer as a direct replacement. The SY89809LTC is obsolete and uses a specific 32-pin TQFP arrangement with HSTL signaling. A valid migration requires matching pin assignments, supply voltage, input thresholds, output swing, reference-plane arrangement, frequency capability, and package dimensions, followed by board-level timing validation.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The component is a general-purpose clock and timing IC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

SY89809LTC datasheet SY89809LTC pinout SY89809LTC datasheet pdf SY89809LTC 500 MHz SY89809LTC 1:9 clock driver SY89809LTC differential HSTL SY89809LTC 32 TQFP SY89809LTC equivalent SY89809LTC replacement Microchip SY89809LTC SY89809LTC price SY89809LTC stock

関連部品&用語

Microchip Technology Micrel Semiconductor SY89809LTC SY89809 family Bus clock driver Clock fanout buffer Clock multiplexer Differential HSTL HSTL Low-voltage bus clock driver 1:9 fanout ratio 500 MHz clock 3.3 V power supply 1.8 V application 32-pin TQFP TQFP package family Surface-mount technology Differential clock distribution Controlled-impedance routing Clock tree Signal integrity Computer systems Communications backplane Industrial control Test and measurement
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示