TAS5036IPFC - 6-Channel Digital Audio PWM Processor | TI
部品番号: TAS5036IPFC ✓ 生産中TAS5036IPFC 概要
A digital audio PWM processor is a specialized mixed-signal audio IC that accepts digital audio data, applies programmable processing, and generates PWM outputs for subsequent power-amplifier or speaker-driver stages. The TAS5036 belongs to the broader hierarchy of digital audio ICs, audio modulator ICs, signal-processing semiconductors, and analog-and-mixed-signal integrated circuits. Its six-channel architecture supports independent or coordinated control of multiple audio channels in a shared audio platform.
Key features include six audio-processing channels, digital I2C control, I2S audio data exchange, and a single 3 V to 3.6 V supply range. The 32 kHz to 192 kHz sample-rate capability covers conventional CD-rate audio through high-resolution audio, while the I2C interface allows a host controller to configure operating parameters. The processor is identified as a commercial-temperature consumer circuit and is supplied in a surface-mount 80-terminal gull-wing TQFP package.
Technically, the TAS5036 separates digital command and audio-data handling from the downstream power-amplification stage. I2S carries serialized audio samples into the processor, while I2C provides a separate control path for configuration and register access. PWM outputs represent the processed channel signals as duty-cycle-controlled waveforms. This architecture can simplify multi-channel audio designs when the system requires more than a basic digital-to-analog conversion path but does not require each channel to use a discrete audio modulator.
Typical applications include powered speakers, soundbars, home-theater receivers, multi-zone audio systems, digital mixing consoles, active subwoofers, and other multichannel consumer or professional audio equipment. The six-channel organization is especially useful where several amplified channels share the same digital source and need coordinated volume, mute, routing, or processing functions.
PCB design should preserve short, controlled digital paths around the I2C and I2S interfaces and provide clean supply decoupling near the device. Because an 80-pin TQFP offers more connection density than a small-outline package, careful via fanout and soldering-plan review is important. The 3 V to 3.6 V supply range also requires regulators and signal paths designed for 3.3 V logic levels.
This product page combines package, interface, supply, sample-rate, pricing, cross-reference, and replacement information with practical application and layout guidance. It helps engineers identify whether the TAS5036IPFC matches the required channel count, digital audio architecture, package, and supply conditions before committing the 12 mm by 12 mm footprint to a PCB.
ドロップイン代替品: TAS5036IPFC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
TAS5036BPFCG4
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TAS5036IPFC 最大定格&電気的特性
| Product Type | Six-channel digital audio PWM processor |
| Number of Channels | 6 channels |
| Supply Voltage Range | 3 V to 3.6 V |
| Control Interface | I2C |
| Audio Data Interface | I2S |
| Sample Rate Range | 32 kHz to 192 kHz |
| パッケージ | 80-TQFP (12 mm x 12 mm) |
| Package Code | TFQFP |
| Terminal Count | 80 terminals |
| Terminal Form | Gull wing |
| 実装タイプ | Surface mount |
| Package Shape | Square |
| Temperature Grade | Commercial |
| 動作温度範囲 | -40°C to +85°C |
| Device Category | Audio special-purpose IC |
TAS5036IPFC square ピン配置ガイド
TAS5036IPFC (square パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: TAS5036IPFC.
詳細は データシート をご参照ください。
主な用途
TAS5036IPFC の用途: 6 件s: Powered Speaker Systems, Soundbar and Home-Theater Audio, Multichannel Active Subwoofer and Speaker Arrays, Digital Mixing Console, Multi-Zone Residential Audio, Professional Audio Monitoring.
Powered Speaker Systems
The TAS5036IPFC fits a powered-speaker architecture that requires six coordinated digital-audio channels in one 80-TQFP device. I2S carries serialized samples into the processor, while I2C allows a system controller to configure channel operation and status. With a 3 V to 3.6 V supply and support from 32 kHz to 192 kHz sample rates, the device can serve conventional hi-fi and higher-resolution audio streams. The processor generates PWM channel signals for a downstream audio-power stage; it does not connect directly to a speaker. Designers should verify channel mapping, clocking, thermal performance of downstream converters, and signal levels against the manufacturer application guidance before releasing production hardware.
おすすめ
Soundbar and Home-Theater Audio
A soundbar or home-theater receiver can use the TAS5036IPFC when six digital-audio outputs must share a common control and data architecture. I2S provides a dedicated path for synchronized audio samples, while I2C isolates configuration traffic from the sample stream. The six-channel organization is useful for main left and right channels, surround channels, a center channel, and a subwoofer or height channel. The 32 kHz to 192 kHz range supports multiple source formats, provided the source, host controller, and clocking network agree on rate and format. Board layout should keep I2S routing short, provide solid return paths, and separate noisy switching-supply regions from sensitive digital-audio circuitry.
おすすめ
Multichannel Active Subwoofer and Speaker Arrays
The TAS5036IPFC is suitable for active speaker arrays and multichannel subwoofer products that require centrally synchronized PWM generation. Six channels allow several driver paths to be managed by one digital processor rather than separate command devices. I2S accepts the common digital source, and I2C supports configuration from a system controller, enabling coordinated mute, level, or operating-mode changes. The 3 V to 3.6 V supply range aligns with compact 3.3 V audio electronics, while sample rates up to 192 kHz accommodate high-resolution content when the upstream converter supports it. Validate PWM timing, amplifier compatibility, grounding, and fault behavior for every driver channel before production.
おすすめ
Digital Mixing Console
A digital mixing console can use the TAS5036IPFC when six processed output channels require a common digital-audio interface and register-control path. The processor accepts I2S audio data and exposes I2S-based PWM outputs for the console's output stages, while I2C provides a separate mechanism for setup and control. This separation is helpful in systems where audio data must remain continuous while supervisory commands are exchanged asynchronously. Support for 32 kHz through 192 kHz allows the console to handle different source domains after suitable clock and format conversion. Layout engineers should treat the I2S lines as clock-sensitive digital signals, use continuous reference planes, and inspect the finished board for data-bit and clock-edge integrity.
おすすめ
Multi-Zone Residential Audio
The TAS5036IPFC can serve as the central six-channel processor in a multi-zone residential audio system. One device can organize multiple synchronized outputs while I2C permits room-level configuration and system monitoring through the main controller. The 3 V to 3.6 V supply range is practical for modern low-voltage embedded audio platforms, and the 32 kHz to 192 kHz capability supports a broad selection of digital sources when their formats are converted appropriately. Because the TQFP package has 80 terminals, engineers should plan for adequate escape routing around all four sides. Firmware should also handle mute, startup sequencing, and loss of I2S or clock signals without producing unwanted audible output.
おすすめ
Professional Audio Monitoring
Professional monitoring and instrumentation products can use the TAS5036IPFC where six digital audio channels need deterministic PWM generation and centralized register control. I2S provides a standard path for receiving source audio, while I2C lets the equipment controller configure processing behavior without sharing the audio-data bus. The 192 kHz upper sample-rate limit supports high-resolution workflows, while the 32 kHz lower limit covers broadcast, communications, and general playback applications. The device should be paired with a downstream power stage whose input bandwidth and noise behavior are compatible with the PWM waveform. PCB implementation should prioritize a quiet 3.3 V supply, short clock routes, solid ground continuity, and controlled impedance for high-rate digital signals.
おすすめ
エンジニアリング参考データ: TAS5036IPFC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TAS5036BPFCG4 |
|---|---|---|
| Package | 80-TQFP (12 mm x 12 mm) | 80-TQFP (12 mm x 12 mm) |
| Brand | Texas Instruments | Texas Instruments |
| Product Type | Six-channel digital audio PWM processor | Digital audio PWM processor |
主な差別化要因
- Integrated six-channel digital-audio PWM processing (vs TAS5036BPFCG4)
- Single-device I2S and I2C integration (vs TAS5036BPFCG4)
- Broad sample-rate coverage (vs TAS5036BPFCG4)
設計ノート
Design the board around the complete 80-terminal TQFP footprint and preserve clearance beneath all package edges for soldering inspection and rework. Route I2S data and clock lines as matched digital signals, avoid splitting the ground reference unnecessarily, and place decoupling capacitors close to the relevant supply pins. Check the manufacturer footprint against the final PCB library rather than inferring dimensions from the package family.
Operate the TAS5036IPFC from a regulated 3 V to 3.6 V supply and account for the voltage drop and tolerance of the power-distribution path. Separate the digital-audio section from noisy switching-converter stages where practical, and use local high-frequency bypass capacitance at the device. Validate the supply at the package pins under maximum channel activity rather than measuring only at the regulator output.
Treat the I2S clock, data, and frame signals as a coordinated clocking group. Keep the clock path continuous, minimize stubs, use solid reference planes, and maintain consistent spacing to adjacent high-speed nets. The processor supports sample rates through 192 kHz, so source and destination timing margins must be validated with the complete host, converter, and downstream amplifier configuration.
Do not treat the TAS5036IPFC as a direct speaker driver. Its PWM outputs belong in a downstream power-amplifier or filter stage. Also verify the complete ordering suffix, temperature grade, channel mapping, and pin functions before manufacturing because a package-compatible device can still have different ordering, marking, or lifecycle characteristics.
コンプライアンス情報
The component is described as a commercial-grade consumer circuit. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the referenced product information. AEC-Q100 is not applicable because this is a commercial audio IC rather than an automotive-qualified device.