THS3120CD - 475mA Current-Feedback Amplifier | Texas Instruments
部品番号: THS3120CD ✓ 生産中THS3120CD 概要
A current-feedback amplifier is a voltage-feedback operational-amplifier alternative optimized for high-speed, wide-gain-bandwidth applications and high capacitive-load drive. Unlike a conventional voltage-feedback amplifier, its closed-loop bandwidth can remain relatively stable as feedback resistance changes. The THS3120 therefore belongs to the operational-amplifier hierarchy, where it serves as a high-speed current-feedback amplifier for instrumentation, signal conditioning, and line-driving systems.
The principal attraction of the THS3120 is its combination of low noise, high voltage operation, and high output-current capability. Its current-feedback architecture is useful when driving cables, terminated inputs, or larger capacitive loads while preserving usable signal bandwidth. The integrated power-down pin supports power conservation in multichannel systems where the amplifier may remain connected to a shared supply but should stop operating between acquisition intervals.
Texas Instruments describes the THS3120 as a single amplifier intended for high-performance signal paths. The THS3120CD orderable variant uses the 8-pin SOIC (D) package, while the broader THS3120 and THS3121 families are also offered in MSOP-8 PowerPAD configurations. Using the THS3120CD requires selecting feedback resistors appropriate for the intended gain because current-feedback amplifiers do not follow the conventional closed-loop-gain relationship of ideal voltage-feedback amplifiers.
Typical applications include video line driving, instrumentation buffering, communications-interface termination, analog test equipment, and industrial signal-conditioning modules. The 475 mA output-drive capability is especially relevant where a conventional precision op-amp would be overloaded by long cables, termination networks, or substantial capacitive loading.
Layout should keep the feedback loop compact and place input and feedback components close to the amplifier pins. Stable operation with capacitive loads depends on the exact load, supply, gain network, and output-current conditions, so the manufacturer’s recommended resistor values and application guidance should be followed rather than assuming a generic compensation network.
This product page combines the manufacturer’s device description with package information, drop-in-family analysis, application guidance, and engineering-focused design notes. It is intended to help engineers identify whether the THS3120CD’s current-feedback architecture, power-down control, and 475 mA drive capability fit a specific high-speed analog design.
ドロップイン代替品: THS3120CD — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: THS3120CD (同一形状・フットプリント) — 相違点: Number of Channels, Package, Slew Rate.
THS3120ID
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →THS3120IDG4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
THS3121D
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
THS3121ID
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →THS3121IDG4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
THS3120CD 最大定格&電気的特性
| Amplifier Type | Current-feedback operational amplifier |
| Number of Channels | 1 circuit |
| 最大出力電流 | 475 mA |
| Supply Voltage Range | ±5 V to ±15 V |
| 電源電流 | 7 mA |
| Power-Down Function | Yes |
| パッケージ | 8-pin SOIC (D) |
| 実装タイプ | Surface mount |
THS3120CD 8-pin soic (d) ピン配置ガイド
THS3120CD (8-pin soic (d) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: THS3120CD.
詳細は データシート をご参照ください。
主な用途
THS3120CD の用途: 6 件s: Video Line Driving, Communications Interface Termination, Precision Instrumentation Buffering, Analog Test and Measurement, Audio Output Amplification, Industrial Sensor Signal Conditioning.
Video Line Driving
The THS3120CD fits video-line driver modules because its current-feedback architecture supports high-speed signal transmission and its 475 mA output rating can drive terminated analog video lines. The amplifier can operate from ±5 V to ±15 V, providing headroom for bipolar video signals, while the power-down pin allows unused channels to reduce supply consumption. Designers should use the manufacturer’s feedback values for the intended gain, terminate the cable according to the system impedance, and verify settling time, output swing, and stability with the actual line length and capacitance.
おすすめ
Communications Interface Termination
The THS3120CD is appropriate for communications-interface termination where a conventional op-amp may not supply enough output current for a cable or back-terminated network. Its 475 mA drive rating provides margin for resistive and capacitive loading, and the current-feedback topology offers useful high-speed behavior as feedback resistance changes. In this circuit, the output stage drives the terminated line while the feedback network establishes gain and bandwidth. Validate common-mode range, output swing, cable capacitance, and loop stability against the production line configuration.
おすすめ
Precision Instrumentation Buffering
THS3120CD can buffer instrumentation signals when the source requires a low-impedance output and the amplifier must also handle substantial downstream loading. The single-amplifier configuration supports ±5 V to ±15 V analog rails common in laboratory and industrial systems, while its 7 mA typical supply current helps control system power. Use suitable input protection and the manufacturer’s recommended current-feedback resistors, and account for input offset, bias current, noise density, and output settling when defining the measurement accuracy.
おすすめ
Analog Test and Measurement
The THS3120CD is useful in analog test equipment that must generate or buffer signals into 50-ohm or 75-ohm test networks. Its 475 mA output-drive capability is more appropriate for such loads than a standard precision op-amp, while the current-feedback architecture supports high-speed operation. Place the output close to the connector and termination to minimize parasitic capacitance, and check the resistor values, output swing, slew behavior, and stability with the complete fixture. The power-down function can isolate the output during instrument setup intervals.
おすすめ
Audio Output Amplification
The THS3120CD can serve as a high-drive, low-noise output stage in professional audio and communication equipment, particularly when driving a terminated line rather than a conventional speaker directly. Its 475 mA output rating and low-noise current-feedback design support faithful signal transfer, while ±5 V to ±15 V operation accommodates dual-rail audio architectures. The engineer must still verify output swing, distortion, gain-bandwidth response, and load stability. For headphone or line-level amplification, use suitable output protection and ensure the power-down state does not create unwanted signal transients.
おすすめ
Industrial Sensor Signal Conditioning
The THS3120CD is suitable for conditioning sensor outputs in industrial systems when the downstream module includes a long cable, a termination network, or an unusually heavy capacitive load. The high 475 mA drive capability helps preserve signal amplitude at the connector, while the power-down pin can reduce consumption during inactive acquisition periods. Place the sensor interface close to the amplifier, use the recommended feedback network, and include input clamping appropriate to the sensor environment. Verify industrial temperature grade, isolation requirements, and EMC behavior for the completed module.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: THS3120CD — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | THS3120ID | THS3120IDG4 | THS3121D | THS3121ID | THS3121IDG4 |
|---|---|---|---|---|---|---|
| Package | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Architecture | Current-feedback operational amplifier | Current-feedback operational amplifier | Current-feedback operational amplifier | Current-feedback operational amplifier | Current-feedback operational amplifier | Current-feedback operational amplifier |
| Supply Voltage Range | ±5 V to ±15 V | ±5 V to ±15 V | ±5 V to ±15 V | ±5 V to ±15 V | ±5 V to ±15 V | ±5 V to ±15 V |
| Power-Down Function | Yes | Yes | Yes | Yes | Yes | Yes |
| Number of Channels | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
主な差別化要因
- High output-drive capability (vs TS974IDT)
- Current-feedback gain flexibility (vs THS3121D)
- Power conservation for inactive channels (vs THS3121ID)
設計ノート
Use the manufacturer’s current-feedback resistor values as the starting point for the intended gain, and keep the feedback loop physically short. Place the feedback resistor adjacent to the inverting input and minimize trace length around the high-speed node. An overly large feedback loop or long output route can add parasitic inductance and capacitance, reducing stability and increasing ringing.
Do not transfer conventional voltage-feedback gain formulas directly to this current-feedback amplifier. Its gain, bandwidth, and stability depend on the feedback resistance and the source and load impedances. Begin with the Texas Instruments application guidance, then verify the selected network against the actual cable capacitance, termination, output current, and supply conditions before releasing the design for production.
Treat the 475 mA output-current rating as a device capability rather than a continuous operating target. Output dissipation depends on the voltage across the output stage and load current, so check the resulting junction temperature under worst-case drive. Provide local supply decoupling and route power and ground to preserve the output-current capability at the load rather than relying only on package-level thermal performance.
Keep sensitive input and feedback nodes away from the output and power-down traces, and maintain a compact ground return for output-current paths. If the amplifier drives a connector or long cable, place series damping or isolation resistance where supported by the manufacturer guidance and place the output network close to the driver. This reduces capacitive loading at the amplifier and limits edge-rate artifacts reaching the cable.
コンプライアンス情報
The available product and datasheet excerpts do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the THS3120CD. Check the manufacturer product page, material-compliance documentation, and orderable-device qualification information before using the device in a regulated end product.