Texas Instruments

THS3120CD - 475mA Current-Feedback Amplifier | Texas Instruments

MPN: THS3120CD ✓ פעיל
±5 V to ±15 V Vdss 475 mA Id 8-pin SOIC (D) Package
כמות הזמנה מינימלית: 1 |

THS3120CD סקירה

Texas Instruments THS3120CD is a single, low-noise, high-output-drive current-feedback operational amplifier rated for 475 mA output current and supplied in an 8-pin SOIC package. The device operates across dual supply voltages of ±5 V to ±15 V and includes a power-down function for reducing supply current when the amplifier is not required.

A current-feedback amplifier is a voltage-feedback operational-amplifier alternative optimized for high-speed, wide-gain-bandwidth applications and high capacitive-load drive. Unlike a conventional voltage-feedback amplifier, its closed-loop bandwidth can remain relatively stable as feedback resistance changes. The THS3120 therefore belongs to the operational-amplifier hierarchy, where it serves as a high-speed current-feedback amplifier for instrumentation, signal conditioning, and line-driving systems.

The principal attraction of the THS3120 is its combination of low noise, high voltage operation, and high output-current capability. Its current-feedback architecture is useful when driving cables, terminated inputs, or larger capacitive loads while preserving usable signal bandwidth. The integrated power-down pin supports power conservation in multichannel systems where the amplifier may remain connected to a shared supply but should stop operating between acquisition intervals.

Texas Instruments describes the THS3120 as a single amplifier intended for high-performance signal paths. The THS3120CD orderable variant uses the 8-pin SOIC (D) package, while the broader THS3120 and THS3121 families are also offered in MSOP-8 PowerPAD configurations. Using the THS3120CD requires selecting feedback resistors appropriate for the intended gain because current-feedback amplifiers do not follow the conventional closed-loop-gain relationship of ideal voltage-feedback amplifiers.

Typical applications include video line driving, instrumentation buffering, communications-interface termination, analog test equipment, and industrial signal-conditioning modules. The 475 mA output-drive capability is especially relevant where a conventional precision op-amp would be overloaded by long cables, termination networks, or substantial capacitive loading.

Layout should keep the feedback loop compact and place input and feedback components close to the amplifier pins. Stable operation with capacitive loads depends on the exact load, supply, gain network, and output-current conditions, so the manufacturer’s recommended resistor values and application guidance should be followed rather than assuming a generic compensation network.

This product page combines the manufacturer’s device description with package information, drop-in-family analysis, application guidance, and engineering-focused design notes. It is intended to help engineers identify whether the THS3120CD’s current-feedback architecture, power-down control, and 475 mA drive capability fit a specific high-speed analog design.

חלופות תחליף ישיר עבור THS3120CD — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם THS3120CD (אותו גורם צורה וטביעת רגל) — שונים ב Number of Channels, Package, Slew Rate.

Texas Instruments
Number of Channels: 1 channel
Package: 8-pin SOIC
Slew Rate: 1700 V/us
השווה עם THS3120CD →
Texas Instruments
Number of Channels: 1 (single)
Slew Rate: 1700 V/µs
השווה עם THS3120CD →

THS3120ID

✅ Drop-In ⚠️ מפרטים לא מאומתים
Texas Instruments
📦 SOIC-8
Current-feedback operational amplifier · 1 channel · 475 mA · 490 mA · 130 MHz · 1700 V/us · +5 V to +15 V · -5 V to -15 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

THS3120IDG4

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 SOIC-8
Same THS3120 family and SOIC-8 footprint; G4 ordering suffix differs from CD, with temperature-grade or qualification scope requiring verification

📋 חלופה להתייחסות (לא בקטלוג)

THS3121D

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 SOIC-8
Related THS3121 current-feedback amplifier in the same SOIC-8 footprint; power-down behavior and device-specific limits require comparison

📋 חלופה להתייחסות (לא בקטלוג)

THS3121ID

✅ Drop-In ⚠️ מפרטים לא מאומתים
Texas Instruments
📦 SOIC-8
Current-Feedback Operational Amplifier · 1 (single) · 130 MHz · 1700 V/µs · 475 mA · ±5 V to ±15 V · SOIC-8 (D) · MSOP-8 (DGN) with PowerPAD

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

THS3121IDG4

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 SOIC-8
Related THS3121 family in an SOIC-8 package; G4 ordering suffix and THS3121-specific power-down behavior must be reviewed before substitution

📋 חלופה להתייחסות (לא בקטלוג)

THS3120CD דירוגים מרביים ומאפיינים חשמליים

Amplifier Type Current-feedback operational amplifier
Number of Channels 1 circuit
זרם מוצא מקסימלי 475 mA
Supply Voltage Range ±5 V to ±15 V
זרם אספקה 7 mA
Power-Down Function Yes
מארז 8-pin SOIC (D)
סוג הרכבה Surface mount

מדריך תצורת פינים של THS3120CD 8-pin soic (d)

תצורת פינים עבור THS3120CD (מארזת 8-pin soic (d)). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת 8-pin soic (d) עבור THS3120CD

אין נתוני פריסת פינים מפורטים עבור THS3120CD.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

THS3120CD מתאים עבור 6 יישוםs: Video Line Driving, Communications Interface Termination, Precision Instrumentation Buffering, Analog Test and Measurement, Audio Output Amplification, Industrial Sensor Signal Conditioning.

📺

Video Line Driving

The THS3120CD fits video-line driver modules because its current-feedback architecture supports high-speed signal transmission and its 475 mA output rating can drive terminated analog video lines. The amplifier can operate from ±5 V to ±15 V, providing headroom for bipolar video signals, while the power-down pin allows unused channels to reduce supply consumption. Designers should use the manufacturer’s feedback values for the intended gain, terminate the cable according to the system impedance, and verify settling time, output swing, and stability with the actual line length and capacitance.

🌐

Communications Interface Termination

The THS3120CD is appropriate for communications-interface termination where a conventional op-amp may not supply enough output current for a cable or back-terminated network. Its 475 mA drive rating provides margin for resistive and capacitive loading, and the current-feedback topology offers useful high-speed behavior as feedback resistance changes. In this circuit, the output stage drives the terminated line while the feedback network establishes gain and bandwidth. Validate common-mode range, output swing, cable capacitance, and loop stability against the production line configuration.

⚡

Precision Instrumentation Buffering

THS3120CD can buffer instrumentation signals when the source requires a low-impedance output and the amplifier must also handle substantial downstream loading. The single-amplifier configuration supports ±5 V to ±15 V analog rails common in laboratory and industrial systems, while its 7 mA typical supply current helps control system power. Use suitable input protection and the manufacturer’s recommended current-feedback resistors, and account for input offset, bias current, noise density, and output settling when defining the measurement accuracy.

🖥️

Analog Test and Measurement

The THS3120CD is useful in analog test equipment that must generate or buffer signals into 50-ohm or 75-ohm test networks. Its 475 mA output-drive capability is more appropriate for such loads than a standard precision op-amp, while the current-feedback architecture supports high-speed operation. Place the output close to the connector and termination to minimize parasitic capacitance, and check the resistor values, output swing, slew behavior, and stability with the complete fixture. The power-down function can isolate the output during instrument setup intervals.

🎧

Audio Output Amplification

The THS3120CD can serve as a high-drive, low-noise output stage in professional audio and communication equipment, particularly when driving a terminated line rather than a conventional speaker directly. Its 475 mA output rating and low-noise current-feedback design support faithful signal transfer, while ±5 V to ±15 V operation accommodates dual-rail audio architectures. The engineer must still verify output swing, distortion, gain-bandwidth response, and load stability. For headphone or line-level amplification, use suitable output protection and ensure the power-down state does not create unwanted signal transients.

🏭

Industrial Sensor Signal Conditioning

The THS3120CD is suitable for conditioning sensor outputs in industrial systems when the downstream module includes a long cable, a termination network, or an unusually heavy capacitive load. The high 475 mA drive capability helps preserve signal amplitude at the connector, while the power-down pin can reduce consumption during inactive acquisition periods. Place the sensor interface close to the amplifier, use the recommended feedback network, and include input clamping appropriate to the sensor environment. Verify industrial temperature grade, isolation requirements, and EMC behavior for the completed module.

What is the THS3120CD?
The THS3120CD is a single current-feedback operational amplifier from Texas Instruments with a 475 mA output-current rating and an 8-pin SOIC package. According to the manufacturer product page and datasheet, it combines low-noise operation, high output-drive capability, wide dual-supply operation from ±5 V to ±15 V, and a dedicated power-down function. It is intended for high-performance analog signal paths where conventional voltage-feedback amplifiers may not provide enough drive or bandwidth flexibility.
What are the key specifications of THS3120CD that engineers should know?
The THS3120CD is a 1-circuit current-feedback amplifier with a 475 mA maximum output current, a ±5 V to ±15 V supply range, and an 8-pin SOIC package. Texas Instruments also identifies a power-down function and a typical 7 mA supply current for the amplifier family. These parameters make the device particularly relevant to high-speed line driving, signal termination, instrumentation, and capacitive-load applications.
Where can I download the THS3120CD datasheet PDF?
The official THS3120 datasheet PDF is available from the Texas Instruments document link on this page. The manufacturer document covers the THS3120 and THS3121 current-feedback amplifier families, including their ±5 V to ±15 V operating range, low-noise performance, high output-drive capability, pin configuration, and application information. Use the manufacturer document as the controlling reference for the THS3120CD ordering code and SOIC-8 pinout.
Where can I find the THS3120CD pinout?
The THS3120CD pinout is shown in the THS3120 family pin-configuration section of the official manufacturer datasheet. The device uses an 8-pin SOIC package, but the amplifier, feedback-network, supply, power-down, and ground connections must be assigned from the exact pin table rather than inferred from a generic SOIC-8 drawing. This page does not reproduce the pin table because the exact numbered assignments are not printed in the product-page excerpts.
What supply voltage range does the THS3120CD support?
The THS3120CD operates from ±5 V to ±15 V, according to the Texas Instruments manufacturer description for the THS3120 and THS3121 families. This is a dual-supply specification for balanced analog systems. Designers should also confirm the absolute maximum supply rating, input and output limits, power-down-pin states, and startup behavior in the manufacturer datasheet before applying the device outside the stated operating range.
How much output current can the THS3120CD drive?
The THS3120CD is specified for output current up to 475 mA. That high-drive capability distinguishes it from many precision operational amplifiers intended only for buffering high-impedance nodes. It can therefore be considered for terminated cable lines, back-terminated outputs, and capacitive loads when the gain network and stability conditions are designed according to the manufacturer guidance. Continuous current and temperature limits still require thermal verification.
Is the THS3120CD suitable for high-speed signal conditioning?
Yes, the THS3120CD is suitable for high-speed current-feedback signal-conditioning designs requiring a combination of wide signal bandwidth and high output drive. Its current-feedback architecture can maintain useful bandwidth as feedback resistance changes, while the 475 mA output rating provides drive for terminated lines and larger loads. The actual gain-bandwidth result depends on the selected feedback resistors, source impedance, supply voltage, and load configuration.
When should I choose THS3120CD over a conventional voltage-feedback op-amp?
Choose the THS3120CD when the design needs high output drive, a terminated high-current output, or the gain flexibility associated with a current-feedback amplifier. A conventional voltage-feedback amplifier is often preferable for precision, low-frequency, or noise-sensitive instrumentation where simple gain-setting resistors and predictable closed-loop behavior are more important. The decision should reflect load capacitance, required bandwidth, output current, and stability constraints.
What is the difference between THS3120CD and THS3120ID?
THS3120CD and THS3120ID identify different orderable variants of the same THS3120 current-feedback amplifier family, and both use the 8-pin SOIC package. The manufacturer family supports operation from ±5 V to ±15 V with a 475 mA drive rating. Because the excerpts do not state the exact temperature-grade or qualification difference associated with the CD and ID suffix codes, verify those ordering details in the official ordering-information table before treating one as an unrestricted replacement.
Can THS3120ID replace THS3120CD without PCB changes?
THS3120ID can share the same 8-pin SOIC footprint as THS3120CD, making it a likely board-level replacement candidate. However, a footprint match alone does not confirm a complete drop-in substitution. Check the exact ordering table for temperature grade, qualification, marking, and lifecycle details, and confirm that the power-down polarity, supply limits, and electrical characteristics remain suitable for the target design.
What is the best drop-in replacement for THS3120CD?
The closest same-family candidates are the other 8-pin SOIC orderable variants of the THS3120, subject to checking the suffix-specific temperature and qualification ratings. The THS3121 family also offers an SOIC-8 configuration, but it must be reviewed carefully because its role and operating characteristics are not identical to the THS3120. For every candidate, verify the numbered pin functions, supply limits, power-down polarity, gain-setting network, and lifecycle status.
What can replace THS3120CD in a high-output-drive design?
The THS3120CD can be replaced most directly by another THS3120 SOIC-8 orderable variant after confirming its suffix-specific temperature grade and qualification. A THS3121 SOIC-8 device may also fit the same package family, but it requires a separate comparison of power-down behavior and electrical ratings. No verified cross-brand part was established as pin-to-pin and parametrically equivalent, so changing manufacturers without a formal engineering review is not recommended.
Is THS3120CD the same as THS3121D?
No, THS3120CD and THS3121D belong to related but different amplifier variants. The manufacturer describes both THS3120 and THS3121 as low-noise, high-voltage, high-output-drive current-feedback amplifiers, and both families include an 8-pin SOIC option. They should not be treated as automatically identical: compare the exact power-down behavior, pin functions, key electrical parameters, and application requirements in the manufacturer datasheet before substitution.
Is THS3120CD available for purchase and what is its lead time?
Current commercial availability and lead time should be requested through the Request a Quote form on this page. The manufacturer product page and distributor listing identify the THS3120CD as an orderable 8-SOIC current-feedback amplifier, but the current quoted amount, stock state, minimum order quantity, and production lead time are not established by the available product excerpts. A factory-backed quote is therefore the appropriate source for an order commitment.
How should the THS3120CD power-down pin be used?
The THS3120CD includes a power-down function intended to reduce supply consumption when the amplifier is not needed. Connect and control the pin according to the manufacturer logic and application guidance, including its defined active state and behavior during startup. Do not leave the control node floating, and confirm that shutting down the amplifier is compatible with the source, feedback network, and downstream load connected to the output.

נתוני עזר הנדסיים עבור THS3120CD — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the THS3120CD when a high-speed analog signal path needs current-feedback behavior, ±5 V to ±15 V operation, and up to 475 mA of output drive from an 8-pin SOIC package. It is especially relevant for terminated analog lines, video output stages, industrial signal conditioning, and test-equipment outputs where a conventional precision op-amp would be overloaded. Prefer THS3120ID or THS3120IDG4 when their suffix-specific temperature grade or qualification better matches the product requirements, but verify the ordering table before substitution. Consider a THS3121 SOIC-8 variant only after checking its distinct power-down behavior and electrical limits. No cross-brand substitute is established for direct replacement, so a manufacturer change requires a complete review of pinout, feedback network, supply range, noise, bandwidth, output swing, current capability, and load stability.

השוואה עם חלופות

פרמטר מוצר זה THS3120ID THS3120IDG4 THS3121D THS3121ID THS3121IDG4
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Amplifier Architecture Current-feedback operational amplifier Current-feedback operational amplifier Current-feedback operational amplifier Current-feedback operational amplifier Current-feedback operational amplifier Current-feedback operational amplifier
Supply Voltage Range ±5 V to ±15 V ±5 V to ±15 V ±5 V to ±15 V ±5 V to ±15 V ±5 V to ±15 V ±5 V to ±15 V
Power-Down Function Yes Yes Yes Yes Yes Yes
Number of Channels 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit

מבדילים עיקריים

  • High output-drive capability (לעומתTS974IDT)
  • Current-feedback gain flexibility (לעומתTHS3121D)
  • Power conservation for inactive channels (לעומתTHS3121ID)

הערות תכנון

Use the manufacturer’s current-feedback resistor values as the starting point for the intended gain, and keep the feedback loop physically short. Place the feedback resistor adjacent to the inverting input and minimize trace length around the high-speed node. An overly large feedback loop or long output route can add parasitic inductance and capacitance, reducing stability and increasing ringing.

Do not transfer conventional voltage-feedback gain formulas directly to this current-feedback amplifier. Its gain, bandwidth, and stability depend on the feedback resistance and the source and load impedances. Begin with the Texas Instruments application guidance, then verify the selected network against the actual cable capacitance, termination, output current, and supply conditions before releasing the design for production.

Treat the 475 mA output-current rating as a device capability rather than a continuous operating target. Output dissipation depends on the voltage across the output stage and load current, so check the resulting junction temperature under worst-case drive. Provide local supply decoupling and route power and ground to preserve the output-current capability at the load rather than relying only on package-level thermal performance.

Keep sensitive input and feedback nodes away from the output and power-down traces, and maintain a compact ground return for output-current paths. If the amplifier drives a connector or long cable, place series damping or isolation resistance where supported by the manufacturer guidance and place the output network close to the driver. This reduces capacitive loading at the amplifier and limits edge-rate artifacts reaching the cable.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The available product and datasheet excerpts do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the THS3120CD. Check the manufacturer product page, material-compliance documentation, and orderable-device qualification information before using the device in a regulated end product.

הנתונים אומתו בתאריך: 2026-11-10 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

THS3120CD datasheet THS3120CD specifications THS3120CD pinout THS3120CD datasheet pdf THS3120CD equivalent THS3120CD replacement THS3120CD drop-in replacement THS3120CD SOIC-8 footprint THS3120CD application circuit THS3120CD vs THS3121D THS3120CD price THS3120CD stock Texas Instruments THS3120CD THS3120 475mA current feedback amplifier THS3120 high output drive amplifier

רכיבים ומונחים קשורים

Texas Instruments THS3120CD THS3120 THS3121 THS3120ID THS3120IDG4 THS3121D THS3121ID THS3121IDG4 current-feedback amplifier current-feedback operational amplifier operational amplifier amplifier IC semiconductor low-noise amplifier high-output-drive amplifier SOIC-8 surface-mount package 475 mA output current ±5 V to ±15 V supply power-down function video line driver signal conditioning instrumentation
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר