Texas Instruments

THS4082ID - 175MHz Dual High-Speed Op Amp | Texas Instruments

部品番号: THS4082ID ✓ 生産中
±5 V to ±15 V Vdss 3.4 mA per channel typical Id 8-pin SOIC (D) Package
MOQ: 1 |

THS4082ID 概要

The Texas Instruments THS4082ID is a dual, 175 MHz low-power voltage-feedback operational amplifier with a 230 V/µs slew rate, packaged in an 8-pin SOIC (D). It supports supply voltages from ±5 V to ±15 V and operates from -40 °C to +85 °C. Each amplifier channel combines broad bandwidth, fast settling, and a typical quiescent current of 3.4 mA per channel.

A voltage-feedback operational amplifier is an analog signal-conditioning component that uses negative feedback to control gain and bandwidth. Its operating hierarchy extends from voltage-feedback amplifier to feedback amplifier, linear amplifier, and analog signal-conditioning IC. This type of amplifier is particularly useful when a system must amplify high-frequency signals without introducing the slew-rate limitations of general-purpose precision amplifiers.

The THS4082ID provides 175 MHz small-signal bandwidth, a 230 V/µs slew rate, and a typical 43 ns settling time to 0.1%. Its high output drive supports a typical output current of 85 mA. These characteristics suit video, communications, instrumentation, and active-filter circuits where fast transients or wideband signals must pass through a small-signal amplifier.

The device also offers strong video performance, including a 35 MHz differential-gain bandwidth and a typical differential-gain error of 0.05°. Its dual-channel architecture allows one package to provide two independent amplifiers. Independent channel operation is useful for matched filters, differential drivers, receiver chains, and instrumentation circuits requiring two related signal paths on one board.

Typical uses include video-signal conditioning, communications-channel interfaces, active filters, data-acquisition front ends, and general high-speed analog amplification. In these systems, the 175 MHz bandwidth provides bandwidth for rising edges and modulated carriers, while the 230 V/µs slew rate helps reproduce large-amplitude transitions with low distortion.

For PCB design, use short feedback traces, place input and feedback components close to the relevant amplifier pins, and provide stable bypassing on both supply rails. The fast response makes stray capacitance, probe loading, and incorrect ground-return paths more consequential than they would be in a lower-bandwidth precision amplifier.

This product page combines the Texas Instruments device specifications, package details, ordering information, application guidance, and engineering-focused design notes into one practical selection reference. It also distinguishes verified drop-in alternatives from package or ordering variants so engineers can make a pin-compatible selection without unnecessary PCB changes.

ドロップイン代替品: THS4082ID — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

THS4082CDRG4

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin SOIC (D)
Commercial temperature grade differs: 0 °C to +70 °C versus -40 °C to +85 °C for THS4082ID; family bandwidth and amplifier count are unchanged.

📋 参考代替品(カタログ未掲載)

THS4082ID 最大定格&電気的特性

Amplifier Type Dual voltage-feedback operational amplifier
Number of Channels 2 channels
Small-Signal Bandwidth 175 MHz
Slew Rate 230 V/µs
Settling Time 43 ns to 0.1%
静止電流 3.4 mA per channel typical
Supply Voltage Range ±5 V to ±15 V
Output Drive Current 85 mA typical
Video Bandwidth 35 MHz
Differential Gain Error 0.05° typical
動作温度範囲 -40 °C to +85 °C
パッケージ 8-pin SOIC (D)
Package Width 3.90 mm
実装タイプ Surface mount

THS4082ID ピン構成

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
ピン 1 OUTA — Output of amplifier A
ピン 2 IN-A — Inverting input of amplifier A
ピン 3 IN+A — Non-inverting input of amplifier A
ピン 4 V− — Negative supply connection
ピン 5 IN+B — Non-inverting input of amplifier B
ピン 6 IN-B — Inverting input of amplifier B
ピン 7 OUTB — Output of amplifier B
ピン 8 V+ — Positive supply connection

主な用途

THS4082ID の用途: 6 件s: Video Signal Conditioning, Communications Channel Interface, Active Filter and Equalizer, Data-Acquisition Front End, Instrumentation Signal Conditioning, Portable and Industrial Analog Systems.

📺

Video Signal Conditioning

The THS4082ID fits video-signal conditioning because its 175 MHz small-signal bandwidth, 35 MHz video bandwidth, and 230 V/µs slew rate preserve rapid transitions through termination and filtering stages. The dual configuration can condition two related channels, such as a video signal and its synchronization path, while the 43 ns typical settling time supports low-latency systems. Source impedance, cable loss, and the required video standard should be evaluated together because bandwidth alone does not guarantee compliant output amplitude, crosstalk, or return loss.

🌐

Communications Channel Interface

The THS4082ID is suitable for communications-channel interfaces requiring more bandwidth than conventional precision amplifiers provide. Its 175 MHz bandwidth accommodates high-rate edge content, while the 230 V/µs slew rate limits slew-related distortion on larger transitions. Two amplifiers in one 8-pin SOIC can implement channel gain, impedance conversion, or active filtering stages. The actual signal integrity depends on matching, termination, filtering, and the bandwidth of surrounding components, so use controlled-impedance routing and measure the complete channel rather than evaluating the amplifier in isolation.

⚡

Active Filter and Equalizer

The THS4082ID can serve as the active element in wideband filter or equalizer stages where a 175 MHz bandwidth and 230 V/µs slew rate are required. Its dual-channel arrangement supports paired signal-path processing or a second-order topology using one amplifier for filtering and the other for gain compensation. Component tolerances, op-amp noise, and parasitic capacitance can alter the realized response, so calculate the filter around the amplifier's specified small-signal and large-signal behavior. Confirm stable operation across the intended gain, load, and supply range before production.

🖥️

Data-Acquisition Front End

The THS4082ID is appropriate for high-speed data-acquisition front ends that need to amplify sensor or sampling signals before digitization. Its 175 MHz bandwidth preserves fast edges, and its 230 V/µs slew rate supports larger output transitions without excessive distortion. The 8-pin SOIC package also keeps the dual amplifier compact, although exposed-pad thermal management is not part of this package. Select external input and feedback networks that preserve the required signal bandwidth, and verify input common-mode limits for the selected ±5 V to ±15 V supply configuration.

🔧

Instrumentation Signal Conditioning

The THS4082ID can condition instrumentation signals when the measurement bandwidth extends beyond the typical range of a precision op amp. Its 175 MHz bandwidth reduces excess phase shift in sensor buffers and gain stages, while dual channels provide a convenient way to process a differential pair. The device's low-power characteristic of 3.4 mA per channel typical also helps control system consumption. Select resistor values and capacitors for the required noise and bandwidth, and confirm that source loading, output range, and grounding meet the instrumentation input specification.

🏭

Portable and Industrial Analog Systems

The THS4082ID suits compact industrial and portable analog systems that require high-speed amplification without the current consumption of a dual high-power amplifier. Its dual-channel organization reduces board area, while the typical 3.4 mA per channel quiescent current supports power-conscious designs. The -40 °C to +85 °C operating range covers many commercial and industrial environments. Thermal design should still account for power dissipation from the complete circuit and local copper area, especially when the output drives a low-impedance load or the device operates continuously near its supply limits.

おすすめ製品の概要

THS4082IDR Same electrical device in a tape-and-reel ordering configuration 使用用途: Video Signal Conditioning, Communications Channel Interface, Active Filter and Equalizer, Data-Acquisition Front End, Instrumentation Signal Conditioning, Portable and Industrial Analog Systems
What are the key specifications of THS4082ID that engineers should know?
The THS4082ID is a dual voltage-feedback operational amplifier with 175 MHz bandwidth, a 230 V/µs slew rate, and a typical 43 ns settling time to 0.1%. According to the Texas Instruments THS4082 product page and manufacturer datasheet, each channel draws a typical 3.4 mA quiescent current, while the device operates from ±5 V to ±15 V. It is offered in an 8-pin SOIC package rated for -40 °C to +85 °C.
What is the operating voltage of THS4082ID?
The THS4082ID operates from a minimum of ±5 V to a maximum of ±15 V across its two supply rails. According to the Texas Instruments manufacturer datasheet, the device is designed for low-power, high-speed voltage-feedback amplification. Designers should verify the complete common-mode input range, output swing, and load requirements for their selected supply voltage before closing the signal path.
What is the bandwidth and slew rate of THS4082ID?
The THS4082ID provides 175 MHz bandwidth and a 230 V/µs slew rate. According to the Texas Instruments manufacturer datasheet, this combination supports high-frequency small-signal amplification and rapid large-signal transitions. The 43 ns typical settling time to 0.1% further characterizes its response when used in video, communications, filtering, and instrumentation circuits.
Where can I download the THS4082ID datasheet PDF?
The official THS4082ID documentation is available through the Texas Instruments product page at https://www.ti.com/product/THS4082. The page provides the manufacturer datasheet and ordering information for the THS4082 family, including the THS4082ID 8-pin SOIC configuration. Use the pin-description and typical-application sections to confirm supply connections, feedback layout, and stability requirements.
Where can I find the THS4082ID pinout?
The THS4082ID uses an 8-pin SOIC (D) package, and its pin assignments appear in the Texas Instruments manufacturer datasheet. The standard dual-amplifier arrangement places output A on pin 1, inverting input A on pin 2, non-inverting input A on pin 3, negative supply on pin 4, non-inverting input B on pin 5, inverting input B on pin 6, output B on pin 7, and positive supply on pin 8. Confirm these assignments against the current datasheet before fabrication.
Where can I buy THS4082ID online and request current availability?
Current commercial availability can be requested through the Request a Quote form on this THS4082ID page. The form is the appropriate channel for checking exact-orderable quantity, lead time, and current supply for the 8-pin SOIC device. Submit the target MPN and required quantity so the quote reflects the exact THS4082ID configuration rather than a related package or ordering code.
What is the price of THS4082ID?
The current commercial terms for THS4082ID should be requested through the Request a Quote form on this page. The quote can account for the exact quantity, package configuration, and supply conditions required by your project. Use the form for purchasing rather than relying on a historical price or a listing for a related ordering code.
What is the lead time for THS4082ID and is it in stock?
Use the Request a Quote form on this page to request the current lead time and stock allocation for THS4082ID. Availability can change with order quantity and production scheduling, so a project-specific answer is more useful than a generic status statement. Provide the required quantity, target date, and shipping destination when requesting the quotation.
What is the difference between THS4082ID and THS4082IDR?
THS4082ID and THS4082IDR identify the same Texas Instruments dual 175 MHz voltage-feedback amplifier family in an 8-pin SOIC (D) package, with the ordering suffix associated with the supplied packing format. Both are described as operating from -40 °C to +85 °C. Because the distinction concerns ordering and packing, verify the reel format and moisture-packaging requirements for your assembly process.
When should I choose THS4082ID over a lower-bandwidth precision amplifier?
Choose the THS4082ID when the signal path needs wide bandwidth and fast settling rather than only high DC accuracy. Its 175 MHz bandwidth, 230 V/µs slew rate, and 43 ns settling time are appropriate for video conditioning, communications interfaces, active filters, and high-speed instrumentation. A lower-bandwidth precision amplifier may be preferable when offset, bias current, and low-frequency accuracy dominate the design.
Is THS4082ID suitable for video-signal conditioning?
The THS4082ID is suitable for video-signal conditioning because the Texas Instruments manufacturer datasheet specifies 35 MHz video bandwidth and a typical differential-gain error of 0.05°. Its 175 MHz small-signal bandwidth and 230 V/µs slew rate also provide margin for signal transitions and crosstalk paths. Confirm the required video standard, source impedance, termination, and output loading before finalizing the circuit.
What can replace THS4082ID?
A valid THS4082ID replacement must use the same 8-pin SOIC footprint, preserve pin-to-pin connectivity, and meet the required bandwidth, slew rate, supply-voltage, input-range, and output-drive limits. The cross-reference review did not identify enough confirmed drop-in replacements to list additional manufacturers safely. Request a quote for THS4082ID or ask for a pin-compatible cross-reference review of a specific candidate before changing the BOM.
What is the best cross-brand equivalent for THS4082ID?
No cross-brand equivalent is recommended without a verified pin-to-pin and parametric comparison. A candidate should provide two amplifiers in an 8-pin SOIC (D) package and satisfy the 175 MHz bandwidth, 230 V/µs slew rate, ±5 V to ±15 V supply range, input range, and output-drive requirements of the target circuit. The Request a Quote form can be used to request review of a specifically proposed replacement.
How should THS4082ID be laid out for stable high-speed operation?
Place each input, feedback, and compensation component close to its associated amplifier pins, and keep output routing away from high-impedance input nodes. According to Texas Instruments application guidance for high-speed amplifiers, short feedback paths and solid supply bypassing reduce parasitic feedback and board-induced instability. Use a low-inductance ground-return strategy and verify the final layout with oscilloscope measurements for rise time, ringing, and channel crosstalk.
Is THS4082ID RoHS compliant and qualified for automotive use?
The RoHS, REACH, lead-free, halogen-free, and automotive-qualification status of THS4082ID should be confirmed on the Texas Instruments product page or in the manufacturer compliance documentation for the exact ordering code. The verified device information identifies a -40 °C to +85 °C commercial-temperature SOIC configuration but does not by itself establish AEC-Q100 qualification. Do not assume automotive suitability without that explicit qualification statement.

エンジニアリング参考データ: THS4082ID — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the THS4082ID when a design needs two independently usable, high-speed voltage-feedback amplifiers in an 8-pin SOIC. Its 175 MHz bandwidth, 230 V/µs slew rate, 43 ns typical settling time, and 3.4 mA per channel typical quiescent current make it appropriate for video conditioning, communications interfaces, active filters, and instrumentation front ends. Select a precision or low-noise amplifier instead when offset voltage, bias current, or DC accuracy is more important than wideband response. Before approving a replacement, require the same SOIC footprint, pin-to-pin assignments, supply range, input range, output swing, and comparable bandwidth and slew rate. The THS4082IDR is an ordering and packing configuration of the same device family rather than an electrically distinct drop-in alternative. Use the Request a Quote form for current commercial terms, lead time, and availability of the exact 8-pin SOIC configuration.

代替品との比較

パラメータ この製品
Package 8-pin SOIC (D)
Brand Texas Instruments
Amplifier Type Dual voltage-feedback operational amplifier
Number of Channels 2
Small-Signal Bandwidth 175 MHz
Slew Rate 230 V/µs
Settling Time 43 ns to 0.1% typical
Quiescent Current 3.4 mA per channel typical
Supply Voltage Range ±5 V to ±15 V
Operating Temperature -40 °C to +85 °C

主な差別化要因

  • High bandwidth with fast large-signal response (vs General-purpose precision amplifier class)
  • Dual amplification in one 8-pin package (vs Single-amplifier alternative class)
  • Designed for broad video and communications bandwidth (vs Narrowband low-frequency amplifier class)

設計ノート

Keep each feedback loop short and place feedback resistors and compensation capacitors directly beside the amplifier pins. The 175 MHz bandwidth and 230 V/µs slew rate make parasitic inductance and capacitance capable of changing phase margin or introducing ringing. Route outputs away from inputs, use a continuous ground reference, and avoid sharing long return paths between channels. Confirm final performance by probing directly at the device pins rather than only at the connector.

Bypass the positive and negative supply pins with short, low-inductance connections and place the capacitors close to the SOIC pins. Use the manufacturer's recommended capacitance and voltage ratings, and check the supply impedance across the 175 MHz operating range. Adequate bypassing reduces supply-induced modulation of the signal, while excessive loop area can add instability that is difficult to distinguish from an application-level failure.

Treat the THS4082ID as a wideband signal-path component rather than a conventional DC precision amplifier. Verify input and output bandwidth at the actual gain setting because noise gain and feedback impedance can reduce the closed-loop response. Keep probe capacitance and cable loading in mind during validation, and inspect both large-signal slew behavior and small-signal ringing. These tests distinguish loop-stability problems from bandwidth limitations.

Do not substitute the SOIC device without checking every pin assignment, supply range, input common-mode limit, output swing, and load requirement. A matching package alone does not guarantee functional interchangeability. Also avoid assuming that the two amplifier channels have identical external networks: channel-to-channel gain, bias, and layout differences can matter in differential or matched-filter systems. Use the Texas Instruments datasheet as the controlling reference for each revision.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance must be confirmed for the exact ordering code in the Texas Instruments product documentation. The verified product information identifies an 8-pin SOIC (D) configuration and a -40 °C to +85 °C operating range but does not state the requested compliance results.

関連検索

THS4082ID datasheet THS4082ID datasheet pdf THS4082ID pinout THS4082ID specifications THS4082ID 175MHz amplifier THS4082ID SOIC-8 Texas Instruments THS4082ID THS4082ID equivalent THS4082ID drop-in replacement THS4082ID vs THS4082IDR THS4082ID application circuit THS4082ID price THS4082ID stock

関連部品&用語

Texas Instruments THS4082ID THS4082 THS4082IDR dual operational amplifier voltage-feedback amplifier feedback amplifier linear amplifier analog signal-conditioning IC 175 MHz bandwidth 230 V/µs slew rate 43 ns settling time 3.4 mA per channel quiescent current SOIC-8 8-pin SOIC surface-mount package video signal conditioning communications channel interface active filter data-acquisition front end instrumentation signal conditioning Texas Instruments RoHS REACH AEC-Q100
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示