THS4082ID - 175MHz Dual High-Speed Op Amp | Texas Instruments
MPN: THS4082ID ✓ فعالTHS4082ID نمای کلی
A voltage-feedback operational amplifier is an analog signal-conditioning component that uses negative feedback to control gain and bandwidth. Its operating hierarchy extends from voltage-feedback amplifier to feedback amplifier, linear amplifier, and analog signal-conditioning IC. This type of amplifier is particularly useful when a system must amplify high-frequency signals without introducing the slew-rate limitations of general-purpose precision amplifiers.
The THS4082ID provides 175 MHz small-signal bandwidth, a 230 V/µs slew rate, and a typical 43 ns settling time to 0.1%. Its high output drive supports a typical output current of 85 mA. These characteristics suit video, communications, instrumentation, and active-filter circuits where fast transients or wideband signals must pass through a small-signal amplifier.
The device also offers strong video performance, including a 35 MHz differential-gain bandwidth and a typical differential-gain error of 0.05°. Its dual-channel architecture allows one package to provide two independent amplifiers. Independent channel operation is useful for matched filters, differential drivers, receiver chains, and instrumentation circuits requiring two related signal paths on one board.
Typical uses include video-signal conditioning, communications-channel interfaces, active filters, data-acquisition front ends, and general high-speed analog amplification. In these systems, the 175 MHz bandwidth provides bandwidth for rising edges and modulated carriers, while the 230 V/µs slew rate helps reproduce large-amplitude transitions with low distortion.
For PCB design, use short feedback traces, place input and feedback components close to the relevant amplifier pins, and provide stable bypassing on both supply rails. The fast response makes stray capacitance, probe loading, and incorrect ground-return paths more consequential than they would be in a lower-bandwidth precision amplifier.
This product page combines the Texas Instruments device specifications, package details, ordering information, application guidance, and engineering-focused design notes into one practical selection reference. It also distinguishes verified drop-in alternatives from package or ordering variants so engineers can make a pin-compatible selection without unnecessary PCB changes.
جایگزینهای drop-in برای THS4082ID — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
THS4082CDRG4
✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده📋 جایگزین مرجع (خارج از کاتالوگ)
THS4082ID حداکثر مقادیر مجاز و مشخصات الکتریکی
| Amplifier Type | Dual voltage-feedback operational amplifier |
| Number of Channels | 2 channels |
| Small-Signal Bandwidth | 175 MHz |
| Slew Rate | 230 V/µs |
| Settling Time | 43 ns to 0.1% |
| جریان سکون | 3.4 mA per channel typical |
| Supply Voltage Range | ±5 V to ±15 V |
| Output Drive Current | 85 mA typical |
| Video Bandwidth | 35 MHz |
| Differential Gain Error | 0.05° typical |
| محدوده دمای کاری | -40 °C to +85 °C |
| بستهبندی | 8-pin SOIC (D) |
| Package Width | 3.90 mm |
| نوع نصب | Surface mount |
پیکربندی پین THS4082ID
| پین 1 | OUTA — Output of amplifier A |
| پین 2 | IN-A — Inverting input of amplifier A |
| پین 3 | IN+A — Non-inverting input of amplifier A |
| پین 4 | V− — Negative supply connection |
| پین 5 | IN+B — Non-inverting input of amplifier B |
| پین 6 | IN-B — Inverting input of amplifier B |
| پین 7 | OUTB — Output of amplifier B |
| پین 8 | V+ — Positive supply connection |
کاربردهای معمول
THS4082ID مناسب است برای 6 کاربردs: Video Signal Conditioning, Communications Channel Interface, Active Filter and Equalizer, Data-Acquisition Front End, Instrumentation Signal Conditioning, Portable and Industrial Analog Systems.
Video Signal Conditioning
The THS4082ID fits video-signal conditioning because its 175 MHz small-signal bandwidth, 35 MHz video bandwidth, and 230 V/µs slew rate preserve rapid transitions through termination and filtering stages. The dual configuration can condition two related channels, such as a video signal and its synchronization path, while the 43 ns typical settling time supports low-latency systems. Source impedance, cable loss, and the required video standard should be evaluated together because bandwidth alone does not guarantee compliant output amplitude, crosstalk, or return loss.
پیشنهادی
Communications Channel Interface
The THS4082ID is suitable for communications-channel interfaces requiring more bandwidth than conventional precision amplifiers provide. Its 175 MHz bandwidth accommodates high-rate edge content, while the 230 V/µs slew rate limits slew-related distortion on larger transitions. Two amplifiers in one 8-pin SOIC can implement channel gain, impedance conversion, or active filtering stages. The actual signal integrity depends on matching, termination, filtering, and the bandwidth of surrounding components, so use controlled-impedance routing and measure the complete channel rather than evaluating the amplifier in isolation.
پیشنهادی
Active Filter and Equalizer
The THS4082ID can serve as the active element in wideband filter or equalizer stages where a 175 MHz bandwidth and 230 V/µs slew rate are required. Its dual-channel arrangement supports paired signal-path processing or a second-order topology using one amplifier for filtering and the other for gain compensation. Component tolerances, op-amp noise, and parasitic capacitance can alter the realized response, so calculate the filter around the amplifier's specified small-signal and large-signal behavior. Confirm stable operation across the intended gain, load, and supply range before production.
پیشنهادی
Data-Acquisition Front End
The THS4082ID is appropriate for high-speed data-acquisition front ends that need to amplify sensor or sampling signals before digitization. Its 175 MHz bandwidth preserves fast edges, and its 230 V/µs slew rate supports larger output transitions without excessive distortion. The 8-pin SOIC package also keeps the dual amplifier compact, although exposed-pad thermal management is not part of this package. Select external input and feedback networks that preserve the required signal bandwidth, and verify input common-mode limits for the selected ±5 V to ±15 V supply configuration.
پیشنهادی
Instrumentation Signal Conditioning
The THS4082ID can condition instrumentation signals when the measurement bandwidth extends beyond the typical range of a precision op amp. Its 175 MHz bandwidth reduces excess phase shift in sensor buffers and gain stages, while dual channels provide a convenient way to process a differential pair. The device's low-power characteristic of 3.4 mA per channel typical also helps control system consumption. Select resistor values and capacitors for the required noise and bandwidth, and confirm that source loading, output range, and grounding meet the instrumentation input specification.
پیشنهادی
Portable and Industrial Analog Systems
The THS4082ID suits compact industrial and portable analog systems that require high-speed amplification without the current consumption of a dual high-power amplifier. Its dual-channel organization reduces board area, while the typical 3.4 mA per channel quiescent current supports power-conscious designs. The -40 °C to +85 °C operating range covers many commercial and industrial environments. Thermal design should still account for power dissipation from the complete circuit and local copper area, especially when the output drives a low-impedance load or the device operates continuously near its supply limits.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای THS4082ID — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Package | 8-pin SOIC (D) |
| Brand | Texas Instruments |
| Amplifier Type | Dual voltage-feedback operational amplifier |
| Number of Channels | 2 |
| Small-Signal Bandwidth | 175 MHz |
| Slew Rate | 230 V/µs |
| Settling Time | 43 ns to 0.1% typical |
| Quiescent Current | 3.4 mA per channel typical |
| Supply Voltage Range | ±5 V to ±15 V |
| Operating Temperature | -40 °C to +85 °C |
تفاوتهای کلیدی
- High bandwidth with fast large-signal response (در مقابلGeneral-purpose precision amplifier class)
- Dual amplification in one 8-pin package (در مقابلSingle-amplifier alternative class)
- Designed for broad video and communications bandwidth (در مقابلNarrowband low-frequency amplifier class)
یادداشتهای طراحی
Keep each feedback loop short and place feedback resistors and compensation capacitors directly beside the amplifier pins. The 175 MHz bandwidth and 230 V/µs slew rate make parasitic inductance and capacitance capable of changing phase margin or introducing ringing. Route outputs away from inputs, use a continuous ground reference, and avoid sharing long return paths between channels. Confirm final performance by probing directly at the device pins rather than only at the connector.
Bypass the positive and negative supply pins with short, low-inductance connections and place the capacitors close to the SOIC pins. Use the manufacturer's recommended capacitance and voltage ratings, and check the supply impedance across the 175 MHz operating range. Adequate bypassing reduces supply-induced modulation of the signal, while excessive loop area can add instability that is difficult to distinguish from an application-level failure.
Treat the THS4082ID as a wideband signal-path component rather than a conventional DC precision amplifier. Verify input and output bandwidth at the actual gain setting because noise gain and feedback impedance can reduce the closed-loop response. Keep probe capacitance and cable loading in mind during validation, and inspect both large-signal slew behavior and small-signal ringing. These tests distinguish loop-stability problems from bandwidth limitations.
Do not substitute the SOIC device without checking every pin assignment, supply range, input common-mode limit, output swing, and load requirement. A matching package alone does not guarantee functional interchangeability. Also avoid assuming that the two amplifier channels have identical external networks: channel-to-channel gain, bias, and layout differences can matter in differential or matched-filter systems. Use the Texas Instruments datasheet as the controlling reference for each revision.
اطلاعات انطباق
Compliance must be confirmed for the exact ordering code in the Texas Instruments product documentation. The verified product information identifies an 8-pin SOIC (D) configuration and a -40 °C to +85 °C operating range but does not state the requested compliance results.