THS7353PW - 3-Channel I2C Video Amp | Texas Instruments
部品番号: THS7353PW ✓ 生産中THS7353PW 概要
A video amplifier, also called a video buffer, conditions analog video signals between source and destination stages. The THS7353 belongs to the broader integrated video-amplifier hierarchy, combining signal buffering, gain control, filtering, input selection, and serial configuration in one semiconductor. This integration reduces the number of discrete signal-path components while allowing programmable behavior through an I2C interface.
The device provides three video channels, a selectable 2:1 multiplexer, selectable low-pass or bypass filter configurations, and programmable 0 dB gain. Its low-power design and single-supply operation suit portable equipment, including USB-powered systems, as well as HDTV, PVR, DVDR, projector, and general-purpose video equipment. An operating-temperature range of -40 °C to +85 °C supports industrial and commercial environments.
The THS7353 is fabricated using Texas Instruments' complementary silicon-germanium BiCom-III process. This process supports the integration of three video channels, filtering functions, multiplexing, gain control, and digital control into a compact low-power device. The 20-TSSOP package supports surface-mount PCB assembly while providing separate routing flexibility for three video channels.
Typical deployments include buffering component video and computer video outputs, switching between two video sources through the 2:1 multiplexer, filtering unwanted video-frequency content, and protecting source devices from downstream loading. Portable and projector designs benefit from the 2.7 V minimum supply and 16.2 mA quiescent current at 3.3 V, although system-level power depends on the selected configuration and output loading.
Design the I2C address and control register settings before laying out the PCB, and confirm compatibility with the video timing and filter requirements of the target source. Decoupling and analog return paths should be arranged to minimize switching noise and ground potential differences between the amplifier and video source.
This product page combines manufacturer specifications, application guidance, candidate replacement analysis, and practical PCB considerations. It identifies where THS7353PW fits, which published alternatives remain unverified as true pin-to-pin replacements, and which design parameters should be checked before approving a substitution.
ドロップイン代替品: THS7353PW — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストTHS7353PW 最大定格&電気的特性
| Channel Count | 3 channels |
| Input Multiplexer Ratio | 2:1 per video path |
| Supply Voltage Range | 2.7 V to 5 V |
| Supply Type | Single supply |
| Total Quiescent Current | 16.2 mA at 3.3 V |
| Typical Output Current | 85 mA |
| Gain | 0 dB |
| Digital Control Interface | I2C |
| Filter Configuration | Selectable filters |
| Input Mode | Selectable input modes |
| 動作温度範囲 | -40 °C to +85 °C |
| パッケージ | 20-pin TSSOP (PW) |
| 実装タイプ | Surface mount |
| Process Technology | Complementary silicon-germanium BiCom-III |
| 出力タイプ | Rail-to-rail |
| RoHS ステータス | Compliant |
THS7353PW 20-pin tssop (pw) ピン配置ガイド
THS7353PW (20-pin tssop (pw) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: THS7353PW.
詳細は データシート をご参照ください。
主な用途
THS7353PW の用途: 6 件s: HDTV Video Output Buffering, Projector Video Input Switching, Portable Media Player Video Interface, PVR and DVDR Video Routing, Industrial Video Test Equipment, Security Camera Video Interface.
HDTV Video Output Buffering
The THS7353PW is well suited to buffering three video paths in an HDTV or general-purpose television design. Its three integrated channels reduce the number of discrete buffers required, while the 2.7 V to 5 V single-supply range accommodates common 3.3 V and 5 V video rails. The 16.2 mA total quiescent current at 3.3 V also supports power-conscious consumer equipment. Because each channel includes selectable filtering and 0 dB gain, the device can provide a configurable signal-conditioning stage rather than merely buffering source outputs. Designers should verify the selected filter response against the video timing standard and confirm source and destination impedance requirements from the manufacturer datasheet.
おすすめ
Projector Video Input Switching
Projectors often need to accept more than one analog video source and drive downstream display circuitry through controlled, low-power paths. The THS7353PW provides three video channels with 2:1 input multiplexing, allowing source selection to be integrated into the buffer stage. Its 0 dB nominal gain preserves the source amplitude, while selectable filters allow the system to tailor signal bandwidth. Operating from a single 2.7 V to 5 V supply simplifies adaptation to portable and installed projector architectures. The design must still verify that the selected channel, filter configuration, and source impedance satisfy the projector input requirements, particularly when several source formats share the same connector.
おすすめ
Portable Media Player Video Interface
The THS7353PW suits portable media devices that need to condition several internal video signals without introducing excessive supply demand. Its single-supply operation from 2.7 V to 5 V works with common portable-system rails, and its 16.2 mA quiescent current at 3.3 V provides a defined low-power starting point. Three channels and integrated 2:1 multiplexers can simplify routing among composite, component, or internal video paths. In a USB-powered design, engineers should include local decoupling, maintain a low-impedance analog return path, and avoid routing digital I2C signals parallel to sensitive video inputs. The final configuration should be checked against the display controller's output specification.
おすすめ
PVR and DVDR Video Routing
The THS7353PW can provide integrated three-channel buffering and 2:1 source selection for PVR and DVDR video paths. Combining these functions reduces board area compared with separate buffers and switches, which is useful in compact consumer electronics. The nominal 0 dB gain helps preserve signal amplitude between internal video sources and downstream encoders, while selectable filters support different video bandwidth requirements. Its 2.7 V to 5 V operating range accommodates common system rails. Designers should confirm the device's intended operating mode, filter selection, and I2C settings against the video processor requirements before releasing the PCB, especially when multiple video standards must coexist.
おすすめ
Industrial Video Test Equipment
Instrumentation that conditions, selects, and monitors video signals can use the THS7353PW as a programmable three-channel front end. The 2:1 multiplexer supports switching between two related sources per channel, while I2C control allows firmware to configure operating states without discrete switches. The -40 °C to +85 °C rating supports industrial environments, and the 20-pin TSSOP package is compatible with conventional surface-mount assembly. For test equipment, engineers should preserve calibration access, use a quiet reference supply, and verify settling behavior for the chosen filter mode. Any use in a precision measurement chain also requires confirmation of gain accuracy and bandwidth from the manufacturer datasheet.
おすすめ
Security Camera Video Interface
The THS7353PW can condition buffered video paths in surveillance equipment where source routing, compactness, and controlled power consumption are important. Three integrated channels support several camera or processed-video outputs, and the 2:1 multiplexers provide local source selection where two inputs must be managed per path. The low-power 16.2 mA quiescent current at 3.3 V is useful in compact camera and recorder electronics, although total consumption depends on loading and filter state. The -40 °C to +85 °C range is suitable for many industrial installations. Engineers should evaluate video bandwidth, output drive, grounding, and isolation requirements for long cable runs before choosing the device for a particular surveillance standard.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: THS7353PW — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | THS7315DR | AD8138 | THS7360IPWR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Analog Devices | Texas Instruments |
主な差別化要因
- Three-channel integration with programmable signal conditioning (vs THS7360IPWR)
- Lower published quiescent current than the six-channel candidate (vs THS7360IPWR)
- Purpose-built 2:1 multiplexing and selectable filtering (vs AD8138)
設計ノート
Place the input, output, and supply bypassing capacitors close to their associated device pins, and provide a continuous return path between the analog ground and power ground connections. Keep the I2C routing away from the three video inputs because switching edges on the control bus can couple into high-impedance video nodes. Follow the pin-description table and recommended-layout section in the manufacturer datasheet when assigning the 20 TSSOP lands.
Configure the filters for the specific video standard rather than selecting them only by nominal bandwidth. The THS7353PW supports selectable filtering and input modes, but each mode changes signal-frequency behavior and potentially settling time. Test the complete source-to-output path with the intended cable, connector, source impedance, and load, and verify that the 0 dB nominal gain does not cause downstream clipping at the selected operating point.
Do not assume that every video amplifier in a TSSOP package is a drop-in substitute. The THS7353PW combines three channels, 2:1 multiplexers, selectable filters, 0 dB gain, and an I2C control interface; a replacement can share the package outline while presenting different pin functions. Confirm package drawing, numbered pins, I2C address, register map, filter behavior, electrical limits, and external-component requirements before changing the BOM.
Estimated: at a 3.3 V supply, the specified 16.2 mA total quiescent current corresponds to approximately 53.5 mW of device quiescent power. Actual consumption rises with output current and depends on the configured channel and filter state. This estimate is not a thermal rating; evaluate copper area, adjacent heat sources, and the manufacturer's operating-temperature limits when placing the device in a confined enclosure.
コンプライアンス情報
RoHS compliance is identified in the published THS7353PW component information. The automotive, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated for this exact ordering code.