NXP Semiconductors

TJA1040T/H/V - 1 Mbps CAN Transceiver | NXP Semiconductors

部品番号: TJA1040T/H/V ✗ 生産終了
8-SO Package
MOQ: 1 |

TJA1040T/H/V 概要

The NXP Semiconductors TJA1040T/H/V is a high-speed CAN physical-layer transceiver designed for passenger-car CAN networks operating up to 1 MBaud. It provides a differential transmitter for the CAN bus and a differential receiver for the CAN controller, with an 8-pin SOIC package. The device is intended for systems where the protocol controller performs CAN frame handling while the transceiver converts digital controller signals into the physical differential bus waveform.

A CAN transceiver is an interface IC that connects a CAN protocol controller to the physical bus. The TJA1040T/H/V belongs to the CAN transceiver class, also described as a CAN physical-layer interface, interface IC, and CAN bus transceiver. It supports the differential signaling used by high-speed CAN systems, allowing controller-side TXD and RXD signals to interface with the CANH and CANL bus conductors.

The principal device characteristics include a maximum intended CAN data rate of 1 MBaud, a half-duplex CAN transceiver arrangement, differential transmit capability, and differential receive capability. The 8-SO package supports conventional surface-mount PCB assembly. The TJA1040 family is intended for automotive and other CAN-based passenger-car applications where the physical-layer transceiver must operate alongside a separate CAN protocol controller.

The transceiver architecture separates protocol processing from bus-line interfacing: the CAN controller generates and interprets frames, while the TJA1040T/H/V handles the electrical signaling between logic-level pins and the CAN bus. This division allows the controller to manage arbitration, acknowledgment, error handling, and higher-layer communication independently of the physical-layer conversion performed by the transceiver.

Typical applications include automotive electronic control units, body-control modules, powertrain controllers, gateway modules, engine controllers, and other distributed vehicle systems. The same high-speed CAN physical interface can also be used in industrial, robotics, and transportation equipment when the system uses a compatible CAN controller and bus topology.

Designers should verify the device pinout, supply requirements, CANH and CANL connections, termination strategy, and the exact ordering-code interpretation in the manufacturer datasheet before layout release. For PCB work, use the SOIC-8 land pattern and route the differential bus pair with consistent geometry and symmetry. The CAN bus should be properly terminated at the physical ends of the network, and the power and ground connections should follow the datasheet recommendations.

This page combines the NXP product description, manufacturer data-sheet reference, cross-reference findings, package information, practical application guidance, and structured comparisons for engineers evaluating the TJA1040T/H/V in a high-speed CAN design.

ドロップイン代替品: TJA1040T/H/V — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

TJA1040T/H/V,118

✅ ドロップイン
📦 SOIC-8
Same TJA1040T/H/V device and 8-SO architecture; the ,118 ordering suffix differs from the base ordering code, with no verified electrical difference

📋 参考代替品(カタログ未掲載)

TJA1040T/CM,118

✅ ドロップイン
📦 SOIC-8
Same NXP TJA1040T 8-SO transceiver family; the /CM suffix identifies a different ordering configuration, while exact electrical and temperature details require datasheet confirmation

📋 参考代替品(カタログ未掲載)

TJA1040T/H/V,518

✅ ドロップイン
📦 SOIC-8
Same TJA1040T/H/V 8-SO electrical configuration; the ,518 ordering suffix changes the delivery code, with no verified functional difference

📋 参考代替品(カタログ未掲載)

SN65HVD1040A

✅ ドロップイン
📦 SOIC-8
TI documents pin-to-pin analog compatibility; ESD protection is improved on pins 5, 6, and 7, while dominant-timeout and bus-wake timing can differ

📋 参考代替品(カタログ未掲載)

SN65HVD1040A-Q1

✅ ドロップイン
📦 SOIC-8
Pin-compatible automotive-qualified alternative with improved ESD protection on pins 5, 6, and 7; timing differences still require software and system validation

📋 参考代替品(カタログ未掲載)

TJA1040T/H/V 仕様

Product Type High-speed CAN physical-layer transceiver
Maximum Intended Data Rate 1 MBaud
Transceiver Configuration 1/1 half-duplex CAN transceiver
Transmit Capability Differential
Receive Capability Differential
パッケージ 8-SO
Package Type SOIC-8 surface-mount package
ピン数 8 pins
Bus Interface CANH and CANL differential bus
Controller Interface TXD and RXD logic-level interface
Primary Application Passenger-car high-speed CAN networks
Product Category Interface IC / CAN transceiver

TJA1040T/H/V ピン構成

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
ピン 1 TXD — Transmit data input from the CAN controller
ピン 2 GND — Ground connection
ピン 3 VCC — Transceiver supply connection
ピン 4 RXD — Receive data output to the CAN controller
ピン 5 VIO — Input and output logic-level supply connection
ピン 6 CANL — CAN low bus line
ピン 7 CANH — CAN high bus line
ピン 8 NC — Not connected

主な用途

TJA1040T/H/V の用途: 6 件s: Automotive Body Control Module, Engine Control Unit, Vehicle Gateway Module, Industrial CAN Controller Card, Robotics Communication Module, Transportation and Rail Equipment.

🚗

Automotive Body Control Module

The TJA1040T/H/V fits a body-control module because it provides the physical interface between a CAN controller and the vehicle's 1 MBaud CAN bus. Its differential transmitter and receiver allow logic-level controller signals to reach CANH and CANL while rejecting common-mode noise through differential reception. The 8-SO package also fits the compact layouts common in distributed vehicle electronics. During PCB design, route the differential bus pair symmetrically, place protection and termination components according to the board topology, and verify the transceiver's exact supply and temperature ratings for the vehicle environment.

🚗

Engine Control Unit

An engine control unit can use the TJA1040T/H/V to connect its CAN protocol controller to a high-speed vehicle network operating up to 1 MBaud. The transceiver handles the differential electrical interface while the controller manages frames, diagnostics, and arbitration. That separation is useful in powertrain electronics where deterministic communication and robust differential signaling are required. Layout should keep CANH and CANL away from ignition and motor-drive switching paths, and the finished design should be checked for bus fault, supply, and temperature behavior against the manufacturer data sheet.

🚗

Vehicle Gateway Module

The TJA1040T/H/V is appropriate for a gateway module that connects a CAN protocol controller to a high-speed CAN network segment. Its differential receive path supports communication with multiple nodes, while differential transmission drives the physical bus. In a gateway PCB, the 8-SO footprint simplifies assembly, but signal-integrity work remains important: preserve a symmetric CANH/CANL pair, provide a solid ground reference, apply protection close to external connectors, and place bus-splitting or termination components only where the network architecture requires them.

🏭

Industrial CAN Controller Card

The TJA1040T/H/V can serve as the physical-layer element of an industrial CAN controller card connected to equipment operating at up to 1 MBaud. It lets a host controller use TXD and RXD logic signals while the transceiver connects to the differential CAN bus. The part is useful when a legacy control architecture must preserve the established TJA1040 electrical interface. For industrial deployment, verify the exact suffix's environmental limits, provide filtering at cable-entry points, maintain a controlled reference plane, and avoid long unprotected stubs that could disturb bus timing or fault behavior.

🏭

Robotics Communication Module

A robot communication module can use the TJA1040T/H/V to bridge a CAN controller and a high-speed CAN network used for sensors, actuators, and distributed controllers. Differential signaling is useful in machinery environments where cable length and common-mode disturbances can affect communication. The 8-SO package supports compact controller-board placement, while the transceiver handles only the physical layer. Designers should maintain controlled bus topology, use termination at the two physical endpoints, keep CAN wiring away from motor and relay paths, and validate timing with the actual cable and loading configuration.

✈️

Transportation and Rail Equipment

The TJA1040T/H/V can support CAN-based communication in transportation equipment where the system architecture uses a compatible high-speed CAN controller and bus. Its 1 MBaud capability and differential bus interface provide a defined physical-layer function for distributed nodes. The choice must account for the exact device grade, environmental limits, and current availability because lifecycle status affects long-term support. PCB implementations should use a controlled CANH/CANL pair, provide connector-side protection, maintain uninterrupted ground returns, and verify operation across the full vehicle supply and temperature range.

What is the TJA1040T/H/V?
The TJA1040T/H/V is a high-speed CAN physical-layer transceiver from NXP Semiconductors. It provides differential transmit and receive capability between a CAN protocol controller and the CAN bus, and it is intended for passenger-car networks operating up to 1 MBaud. The device is packaged in an 8-SO configuration, as identified in the NXP product information and distributor listings.
What is the operating speed of the TJA1040T/H/V?
The TJA1040T/H/V is intended for CAN operation up to 1 MBaud. This rate describes the physical CAN bus communication speed supported by the transceiver, while a separate CAN protocol controller handles frame processing, arbitration, acknowledgment, and error management. The NXP product page describes the device as a high-speed CAN interface intended primarily for passenger-car systems.
Where can I download the TJA1040T datasheet PDF?
The official TJA1040 high-speed CAN transceiver data sheet is available from NXP at https://www.nxp.com/docs/en/data-sheet/TJA1040.pdf. The manufacturer document identifies the TJA1040 as a CAN interface between a protocol controller and the physical bus. Use the pin-description table, electrical characteristics, and application information in that document when assigning pins and designing the bus interface.
What is the TJA1040T pinout?
The TJA1040T uses an 8-pin SOIC arrangement with TXD, GND, VCC, RXD, VIO, CANL, CANH, and NC positions. The NXP TJA1040 data sheet defines the controller-side, supply, and CAN bus connections. Confirm the exact pin numbering against the manufacturer pinout before routing tracks, especially for prototype boards assembled from a generic package drawing.
What is the difference between TJA1040T/H/V,118 and TJA1040T/H/V,112?
The ordering suffixes identify different delivery or packaging configurations of the TJA1040T/H/V device rather than different CAN transceiver architectures. The distributor descriptions for both versions identify a 1/1 half-duplex CAN transceiver in an 8-SO package. For mechanical drawings, temperature limits, and regulatory status, use the exact suffix with the NXP ordering information before releasing a production BOM.
Is TJA1040T/H/V suitable for automotive CAN networks?
The TJA1040T/H/V is specifically described by NXP as a high-speed CAN interface intended for passenger-car applications up to 1 MBaud. Its differential transmitter and receiver suit the physical layer of distributed vehicle electronics. For a new production design, confirm the exact suffix's automotive qualification, temperature grade, and lifecycle status with NXP because the family is identified as obsolete in current market information.
Can the TJA1040T/H/V be used with a CAN controller?
Yes, the TJA1040T/H/V is designed to operate with a separate CAN protocol controller. The controller communicates through TXD and RXD logic signals, while the transceiver drives the differential CANH and CANL bus lines and receives the bus state. This division of responsibilities allows the controller to implement CAN protocol functions without handling the physical differential waveform directly.
What is the best drop-in replacement for TJA1040T/H/V?
The SN65HVD1040A is the strongest documented cross-brand replacement candidate because TI describes it as pin-to-pin compatible with TJA1040T devices from an analog and pin perspective. Timing and ESD-protection differences may still require validation. The TJA1040T/CM,118 and TJA1040T/H/V ordering variants are same-family NXP options, but each exact suffix must be checked for mechanical, temperature, and lifecycle requirements.
What can replace TJA1040T/H/V?
The SN65HVD1040A can replace the TJA1040T/H/V in an 8-pin CAN interface after checking timing, supply, and bus-level differences. TI specifically identifies it as drop-in compatible from an analog and pin standpoint and notes improved ESD protection on pins 5, 6, and 7. Other CAN transceivers with similar specifications should not be treated as drop-in parts unless their pinout and timing are verified.
Is TJA1040T/H/V the same as TJA1042?
No, the TJA1040T/H/V and TJA1042 are related CAN transceivers but are not automatically identical drop-in parts. TI identifies differences in undervoltage detection, minimum VIO, and input/output threshold definitions between the devices. Use the TJA1042 only after comparing its pin arrangement, supply thresholds, timing, and bus behavior against the complete system requirements.
When should I choose TJA1040T/H/V over a newer CAN transceiver?
Choose the TJA1040T/H/V when an existing design requires the established TJA1040 8-SO pin arrangement and the design has already validated its high-speed CAN behavior. For new designs, favor a currently supported transceiver when its power thresholds, standby behavior, ESD protection, timing, and package meet the system requirements. Obsolete lifecycle status makes careful sourcing and long-term supply planning important.
TJA1040T/H/V vs SN65HVD1040A — which is better for a high-speed CAN bus?
The SN65HVD1040A is generally the more practical choice for a new design because TI describes it as pin-to-pin compatible with the TJA1040T and notes improved ESD protection on pins 5, 6, and 7. The TJA1040T/H/V remains useful for maintaining an existing proven design. Final selection should include timing, supply thresholds, bus fault behavior, and lifecycle review.
What is the best Texas Instruments equivalent for TJA1040T/H/V?
The SN65HVD1040A is the documented Texas Instruments alternative with an 8-pin CAN transceiver arrangement corresponding to the TJA1040T. TI states that it is drop-in compatible from an analog and pin perspective, while noting timing differences and stronger ESD protection on pins 5, 6, and 7. Review those distinctions and the exact board footprint before substitution.
How should CANH and CANL be routed on the PCB?
Route CANH and CANL as a tightly coupled differential pair with symmetrical geometry and a consistent impedance target determined by the PCB stack-up and bus topology. Keep the pair away from unrelated switching nodes and noisy return paths, and follow the manufacturer application guidance for connector and termination placement. The TJA1040T/H/V data sheet provides the device-side electrical and layout context.
How should the TJA1040T/H/V CAN bus be terminated?
Terminate the CAN bus at the two physical ends of the network using the termination scheme specified by the selected CAN network implementation, commonly two 120-ohm resistors placed across CANH and CANL. Avoid unnecessary termination on interior nodes because excessive parallel resistance can load the bus. Confirm resistor values and placement against the NXP application information and the complete network topology.
What are the key specifications of TJA1040T/H/V that engineers should know?
The key engineering facts are a maximum intended CAN rate of 1 MBaud, differential transmit and receive capability, a 1/1 half-duplex transceiver configuration, and an 8-SO package. NXP positions the TJA1040T as the interface between a CAN protocol controller and the physical bus for passenger-car systems. Supply limits, temperature range, logic thresholds, and protection ratings should be taken from the manufacturer data sheet.
Where can I request a quote for TJA1040T/H/V?
Use the Request a Quote form on this page for current TJA1040T/H/V availability, commercial terms, and lead-time confirmation. Because the device is identified as obsolete, request the exact suffix and required quantity so legacy stock, condition, traceability, and delivery schedule can be confirmed before design commitment. The form is the appropriate route for a current sourcing quotation.
Is TJA1040T/H/V currently in stock?
Current TJA1040T/H/V stock should be confirmed through the Request a Quote form on this page because availability for an obsolete device can change quickly and depends on the exact suffix and quantity. Market listings exist for several TJA1040 ordering variants, but a listing alone does not establish the quantity, condition, or delivery commitment needed for production. Use the form for a current supply response.
How long is the lead time for TJA1040T/H/V?
The current lead time for TJA1040T/H/V should be requested through the Request a Quote form on this page. Lead time for an obsolete transceiver depends on remaining factory or distribution inventory, exact ordering suffix, package condition, quantity, and shipment destination. Do not rely on a generic market estimate when production continuity or traceability is required.

エンジニアリング参考データ: TJA1040T/H/V — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the TJA1040T/H/V when maintaining an existing TJA1040-based design, particularly a passenger-car CAN network that has already validated the 8-SO pin arrangement and 1 MBaud interface. Choose TJA1040T/H/V,118 or TJA1040T/H/V,518 when the required delivery configuration and lifecycle terms match, while confirming the exact ordering suffix. Consider SN65HVD1040A for a new design because TI documents pin compatibility and improved ESD protection on pins 5, 6, and 7, but review timing differences and test the complete CAN network. SN65HVD1040A-Q1 is appropriate when the automotive-qualified suffix is required. Do not select the TJA1042 or other similarly described transceivers solely by function; their supply thresholds, timing, logic levels, and pin behavior can differ.

代替品との比較

パラメータ この製品 TJA1040T/H/V,118 TJA1040T/CM,118 TJA1040T/H/V,518 SN65HVD1040A SN65HVD1040A-Q1
Package SOIC-8 (8-SO) SOIC-8 (8-SO) SOIC-8 (8-SO) SOIC-8 (8-SO) SOIC-8 SOIC-8
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors Texas Instruments Texas Instruments
Product Type High-speed CAN transceiver High-speed CAN transceiver High-speed CAN transceiver High-speed CAN transceiver CAN transceiver Automotive CAN transceiver
Number of Pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins

主な差別化要因

  • Established NXP high-speed CAN physical-layer interface (vs SN65HVD1040A)
  • Direct same-brand ordering compatibility (vs TJA1040T/H/V,518)
  • Documented pin-level replacement path with enhanced ESD protection (vs TJA1040T/H/V)

設計ノート

Route CANH and CANL as a symmetrical differential pair with continuous reference to the ground plane. Use the PCB stack-up to establish a controlled impedance, avoid discontinuities, and keep the pair away from switching-power and high-current return paths. Place transceiver bypass capacitance close to the relevant supply pins and follow the NXP data sheet's layout guidance when establishing the ground and supply connections.

Do not assume that every 8-pin CAN transceiver is pin-compatible. The TJA1040T/H/V uses a specific controller, supply, and bus pin arrangement, and the SN65HVD1040A family has documented timing and ESD-related distinctions. Confirm the footprint and pin table, verify VIO and supply thresholds, and review dominant-timeout behavior before substituting a part in an operating vehicle or industrial network.

Place the CAN connector, protection network, termination components, and transceiver in a deliberate signal path. Protection devices should be close to the connector, while the CANH/CANL pair should proceed to the transceiver with minimal stubs and consistent geometry. Install termination only at the physical ends of the CAN network because excess parallel termination can alter bus loading and degrade communication margin.

Treat the TJA1040T/H/V ordering suffix as a controlled part of the design identity. The TJA1040T/H/V, TJA1040T/H/V,118, and TJA1040T/H/V,518 references can describe related ordering or delivery configurations rather than interchangeable engineering choices. Verify package drawing, temperature grade, qualification, and lifecycle for the exact production suffix instead of substituting suffixes solely from their visual similarity.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The exact-suffix environmental and compliance attributes are not stated in the accessible product references and must be confirmed with NXP before production release.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

tja1040t datasheet tja1040t pdf datasheet tja1040t pdf tja1040t cm 118 datasheet nxp tja1040t TJA1040T/H/V datasheet TJA1040T/H/V pinout TJA1040T/H/V equivalent TJA1040T/H/V replacement TJA1040T/H/V vs SN65HVD1040A TJA1040T/H/V footprint TJA1040T/H/V price TJA1040T/H/V stock TJA1040T automotive CAN TJA1040T/H/V application circuit

関連部品&用語

NXP Semiconductors TJA1040T/H/V TJA1040T TJA1040T/H/V,118 TJA1040T/H/V,518 TJA1040T/CM,118 SN65HVD1040A SN65HVD1040A-Q1 CAN transceiver high-speed CAN Controller Area Network physical-layer interface interface IC differential transceiver half-duplex 1 MBaud CANH CANL TXD RXD SOIC-8 8-SO surface mount passenger-car electronics differential signaling
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示