TLV2342IP - Dual 8V 320kHz Op Amp | Texas Instruments
部品番号: TLV2342IP ✓ 生産中TLV2342IP 概要
An operational amplifier is an active analog signal-conditioning device that uses high open-loop gain to amplify differences between two inputs. The TLV2342IP belongs to the linear amplifier hierarchy, where dual CMOS op amps are used for voltage buffering, signal amplification, active filtering, comparators, and general-purpose analog interfaces. Two independent amplifiers in one package provide functional integration while reducing the number of components required on a circuit board.
Key features include dual-channel operation, an 8 V maximum supply specification, and a 320 kHz gain-bandwidth product. Its CMOS construction supports low-voltage analog systems, while the PDIP package facilitates prototype assembly, inspection, and through-hole insertion. The two channels share common power pins but have independent input and output connections, allowing one channel to perform a different analog function from the other.
The TLV2342 family uses a LinCMOS-style low-voltage, high-speed operational-amplifier architecture. Its 320 kHz bandwidth is appropriate for audio-range and general-purpose closed-loop applications rather than high-frequency video or precision instrumentation. Operating characteristics must be evaluated against the manufacturer's absolute-maximum ratings, recommended operating conditions, electrical characteristics, and typical-application circuits in the TLV2342 datasheet.
Typical uses include two-stage audio signal conditioning, low-frequency active filters, sensor-interface buffering, transducer amplification, and general-purpose industrial control. The dual organization is especially useful when two related channels are required, such as an input amplifier followed by a low-pass filter or two coordinated channels in a differential signal path. Each channel's stability and usable bandwidth depend on the selected noise-gain configuration and feedback network.
When designing around the TLV2342IP, preserve the package pin arrangement and verify each channel's feedback connection, input common-mode range, output swing, and supply requirements. Decoupling should be placed close to the supply pins, and the unused amplifier channel should be configured according to the manufacturer's recommendations rather than left floating. The PDIP format is also useful where reworkability and through-hole compatibility matter more than the smaller footprint of surface-mount alternatives.
This product page consolidates the manufacturer part classification, verified distributor listing data, package information, functional alternatives, application guidance, and practical circuit-design notes into one engineering-focused reference for evaluating the TLV2342IP.
ドロップイン代替品: TLV2342IP — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: TLV2342IP (同一形状・フットプリント) — 相違点: Amplifier Type, Package.
TLV2342IPG4
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
TLV2342YIP
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
TLV2342IP 最大定格&電気的特性
| Amplifier Type | Dual general-purpose CMOS operational amplifier |
| Number of Channels | 2 channels |
| Maximum Supply Voltage | 8 V |
| Gain-Bandwidth Product | 320 kHz |
| パッケージ | 8-pin PDIP (P) |
| 実装タイプ | Through-hole |
| Process Technology | CMOS |
TLV2342IP 8-pin pdip (p) ピン配置ガイド
TLV2342IP (8-pin pdip (p) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: TLV2342IP.
詳細は データシート をご参照ください。
主な用途
TLV2342IP の用途: 6 件s: Audio Signal Conditioning, Sensor Signal Buffering, Active Audio Filters, Industrial Control Interfaces, Low-Frequency Measurement Circuits, Portable Battery-Powered Circuits.
Audio Signal Conditioning
The TLV2342IP fits low-voltage audio preamplifier and buffering circuits because it provides two channels with a 320 kHz gain-bandwidth product under an 8 V maximum supply rating. One channel can amplify a microphone or line-level source while the other performs filtering or active gain control. Its bandwidth exceeds the audio band, although actual distortion, noise, output swing, and stability depend on the selected gain and load. Verify the closed-loop response and maximum output excursion for the intended source before finalizing the dual-channel circuit.
おすすめ
Sensor Signal Buffering
The TLV2342IP is suitable for buffering high-impedance sensor outputs where the source cannot directly drive the following stage. Each amplifier provides high open-loop gain and can reduce loading when configured as a voltage follower under the conditions described in the manufacturer data sheet. The dual package lets one channel buffer the sensor while the second handles gain or filtering. Confirm the input common-mode range, bias current, offset voltage, and output drive against the sensor's operating range before deployment.
おすすめ
Active Audio Filters
The two channels in the TLV2342IP can implement a matched active-filter section, such as a low-pass stage followed by another gain or filter block. Its 320 kHz gain-bandwidth product provides bandwidth beyond typical audio frequencies, while the 8 V supply rating supports single-supply designs operating below that limit. Component tolerances and the amplifier's finite gain-bandwidth response determine the achievable filter characteristic, so simulation and bench testing should confirm attenuation, phase, and stability at the target frequency.
おすすめ
Industrial Control Interfaces
The TLV2342IP can serve as a dual amplifier in low-voltage industrial control boards for conditioning control signals or driving limited loads. The PDIP package is practical for through-hole assembly, inspection, and maintenance in equipment with moderate update volumes. Each channel must remain inside the family's input common-mode and output-swing limits, and the system designer should verify operating temperature, noise margin, isolation boundaries, and protection requirements. The device is a general-purpose amplifier rather than an automatically qualified industrial part.
おすすめ
Low-Frequency Measurement Circuits
The TLV2342IP is applicable to low-frequency measurement front ends that need buffering, gain, or active filtering around sensors and converters. Its 320 kHz closed-loop capability leaves useful bandwidth above many low-frequency measurement bands, while two channels support compact cascaded analog paths. Offset, input bias current, open-loop gain, and noise determine the achievable accuracy. Designers should evaluate those parameters alongside the source impedance and the data-converter's input range in the manufacturer electrical-characteristics tables.
おすすめ
Portable Battery-Powered Circuits
The dual TLV2342IP can support compact, battery-powered analog circuitry when the supply remains within the family's operating limits. Combining two amplifiers in one package reduces board area, and the CMOS implementation is suited to low-voltage operation. The real power budget depends on supply voltage, quiescent current, output current, and the selected feedback network. Check the low-voltage performance and operating-temperature limits in the TLV2342 data sheet, and include a decoupling capacitor at the package supply pins.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TLV2342IP — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TLV2342IPG4 | TLV2342YIP |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin PDIP (P) | 8-pin PDIP (P) | 8-pin PDIP (P) |
| Amplifier Channels | 2 | 2 | 2 |
| Maximum Supply Voltage | 8 V | 8 V | 8 V |
| Gain-Bandwidth Product | 320 kHz | 320 kHz | 320 kHz |
| Technology | CMOS | CMOS | CMOS |
| Mounting Type | Through-hole | Through-hole | Through-hole |
| Orderable Configuration | TLV2342IP | G4 ordering variant | Y ordering variant |
主な差別化要因
- Maintains the established TLV2342IP through-hole footprint (vs TLV9102)
- Provides the established 320 kHz family bandwidth (vs TLV2342IPG4)
- Integrates two channels in one PDIP package (vs TLV2342YIP)
設計ノート
Place the supply-decoupling capacitor close to the TLV2342IP power pins and connect it to a low-impedance ground return. Keep the circuit's total supply below the 8 V maximum rating, including transient margin. Because both amplifier channels share the same supply pins, a disturbance on the package supply rail affects both channels and may appear as correlated noise in the output.
Do not assume that a dual operational amplifier can be used in any two independent circuit roles. Each channel must satisfy the input common-mode range and output-swing requirements at the actual supply voltage. Verify whether the unused channel can remain connected to ground, is configured as a follower, or must be otherwise stabilized; follow the manufacturer's recommended unused-amplifier arrangement.
Select feedback resistors and capacitors for the required noise gain and check the closed-loop stability against the 320 kHz gain-bandwidth product. Add a small isolation resistor where the source capacitance could interact with amplifier input capacitance. For sensitive signals, maintain a single-point ground reference and avoid routing output and high-impedance input paths in parallel.
Use the manufacturer's 8-pin PDIP pin-description table when assigning tracks and keep the DIP outline and hole spacing unchanged. The through-hole package permits easy replacement and inspection, but its lead spacing and body width require more board area than a surface-mount dual op amp. Confirm component orientation against the pin-1 marking before assembly.
コンプライアンス情報
Compliance attributes were not explicitly identified in the retrieved manufacturer and distributor records. Confirm current environmental and material declarations with Texas Instruments for the exact orderable part.