TLV2342IP - Dual 8V 320kHz Op Amp | Texas Instruments
MPN: TLV2342IP ✓ 啟用中TLV2342IP 概覽
An operational amplifier is an active analog signal-conditioning device that uses high open-loop gain to amplify differences between two inputs. The TLV2342IP belongs to the linear amplifier hierarchy, where dual CMOS op amps are used for voltage buffering, signal amplification, active filtering, comparators, and general-purpose analog interfaces. Two independent amplifiers in one package provide functional integration while reducing the number of components required on a circuit board.
Key features include dual-channel operation, an 8 V maximum supply specification, and a 320 kHz gain-bandwidth product. Its CMOS construction supports low-voltage analog systems, while the PDIP package facilitates prototype assembly, inspection, and through-hole insertion. The two channels share common power pins but have independent input and output connections, allowing one channel to perform a different analog function from the other.
The TLV2342 family uses a LinCMOS-style low-voltage, high-speed operational-amplifier architecture. Its 320 kHz bandwidth is appropriate for audio-range and general-purpose closed-loop applications rather than high-frequency video or precision instrumentation. Operating characteristics must be evaluated against the manufacturer's absolute-maximum ratings, recommended operating conditions, electrical characteristics, and typical-application circuits in the TLV2342 datasheet.
Typical uses include two-stage audio signal conditioning, low-frequency active filters, sensor-interface buffering, transducer amplification, and general-purpose industrial control. The dual organization is especially useful when two related channels are required, such as an input amplifier followed by a low-pass filter or two coordinated channels in a differential signal path. Each channel's stability and usable bandwidth depend on the selected noise-gain configuration and feedback network.
When designing around the TLV2342IP, preserve the package pin arrangement and verify each channel's feedback connection, input common-mode range, output swing, and supply requirements. Decoupling should be placed close to the supply pins, and the unused amplifier channel should be configured according to the manufacturer's recommendations rather than left floating. The PDIP format is also useful where reworkability and through-hole compatibility matter more than the smaller footprint of surface-mount alternatives.
This product page consolidates the manufacturer part classification, verified distributor listing data, package information, functional alternatives, application guidance, and practical circuit-design notes into one engineering-focused reference for evaluating the TLV2342IP.
直接替換替代品,適用於 TLV2342IP — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TLV2342IP (相同外形與佔位) — 差異在於 Amplifier Type, Package.
TLV2342IPG4
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
TLV2342YIP
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
TLV2342IP 最大額定值與電氣特性
| Amplifier Type | Dual general-purpose CMOS operational amplifier |
| Number of Channels | 2 channels |
| Maximum Supply Voltage | 8 V |
| Gain-Bandwidth Product | 320 kHz |
| 封裝 | 8-pin PDIP (P) |
| 安裝類型 | Through-hole |
| Process Technology | CMOS |
TLV2342IP 8-pin pdip (p) 腳位配置指南
TLV2342IP(8-pin pdip (p) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: TLV2342IP.
請參閱 資料表 以查看完整腳位配置。
典型應用
TLV2342IP 適用於 6 應用s: Audio Signal Conditioning, Sensor Signal Buffering, Active Audio Filters, Industrial Control Interfaces, Low-Frequency Measurement Circuits, Portable Battery-Powered Circuits.
Audio Signal Conditioning
The TLV2342IP fits low-voltage audio preamplifier and buffering circuits because it provides two channels with a 320 kHz gain-bandwidth product under an 8 V maximum supply rating. One channel can amplify a microphone or line-level source while the other performs filtering or active gain control. Its bandwidth exceeds the audio band, although actual distortion, noise, output swing, and stability depend on the selected gain and load. Verify the closed-loop response and maximum output excursion for the intended source before finalizing the dual-channel circuit.
推薦
Sensor Signal Buffering
The TLV2342IP is suitable for buffering high-impedance sensor outputs where the source cannot directly drive the following stage. Each amplifier provides high open-loop gain and can reduce loading when configured as a voltage follower under the conditions described in the manufacturer data sheet. The dual package lets one channel buffer the sensor while the second handles gain or filtering. Confirm the input common-mode range, bias current, offset voltage, and output drive against the sensor's operating range before deployment.
推薦
Active Audio Filters
The two channels in the TLV2342IP can implement a matched active-filter section, such as a low-pass stage followed by another gain or filter block. Its 320 kHz gain-bandwidth product provides bandwidth beyond typical audio frequencies, while the 8 V supply rating supports single-supply designs operating below that limit. Component tolerances and the amplifier's finite gain-bandwidth response determine the achievable filter characteristic, so simulation and bench testing should confirm attenuation, phase, and stability at the target frequency.
推薦
Industrial Control Interfaces
The TLV2342IP can serve as a dual amplifier in low-voltage industrial control boards for conditioning control signals or driving limited loads. The PDIP package is practical for through-hole assembly, inspection, and maintenance in equipment with moderate update volumes. Each channel must remain inside the family's input common-mode and output-swing limits, and the system designer should verify operating temperature, noise margin, isolation boundaries, and protection requirements. The device is a general-purpose amplifier rather than an automatically qualified industrial part.
推薦
Low-Frequency Measurement Circuits
The TLV2342IP is applicable to low-frequency measurement front ends that need buffering, gain, or active filtering around sensors and converters. Its 320 kHz closed-loop capability leaves useful bandwidth above many low-frequency measurement bands, while two channels support compact cascaded analog paths. Offset, input bias current, open-loop gain, and noise determine the achievable accuracy. Designers should evaluate those parameters alongside the source impedance and the data-converter's input range in the manufacturer electrical-characteristics tables.
推薦
Portable Battery-Powered Circuits
The dual TLV2342IP can support compact, battery-powered analog circuitry when the supply remains within the family's operating limits. Combining two amplifiers in one package reduces board area, and the CMOS implementation is suited to low-voltage operation. The real power budget depends on supply voltage, quiescent current, output current, and the selected feedback network. Check the low-voltage performance and operating-temperature limits in the TLV2342 data sheet, and include a decoupling capacitor at the package supply pins.
推薦
推薦產品摘要
工程參考資料,適用於 TLV2342IP — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TLV2342IPG4 | TLV2342YIP |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin PDIP (P) | 8-pin PDIP (P) | 8-pin PDIP (P) |
| Amplifier Channels | 2 | 2 | 2 |
| Maximum Supply Voltage | 8 V | 8 V | 8 V |
| Gain-Bandwidth Product | 320 kHz | 320 kHz | 320 kHz |
| Technology | CMOS | CMOS | CMOS |
| Mounting Type | Through-hole | Through-hole | Through-hole |
| Orderable Configuration | TLV2342IP | G4 ordering variant | Y ordering variant |
主要差異化特點
- Maintains the established TLV2342IP through-hole footprint (對比TLV9102)
- Provides the established 320 kHz family bandwidth (對比TLV2342IPG4)
- Integrates two channels in one PDIP package (對比TLV2342YIP)
設計說明
Place the supply-decoupling capacitor close to the TLV2342IP power pins and connect it to a low-impedance ground return. Keep the circuit's total supply below the 8 V maximum rating, including transient margin. Because both amplifier channels share the same supply pins, a disturbance on the package supply rail affects both channels and may appear as correlated noise in the output.
Do not assume that a dual operational amplifier can be used in any two independent circuit roles. Each channel must satisfy the input common-mode range and output-swing requirements at the actual supply voltage. Verify whether the unused channel can remain connected to ground, is configured as a follower, or must be otherwise stabilized; follow the manufacturer's recommended unused-amplifier arrangement.
Select feedback resistors and capacitors for the required noise gain and check the closed-loop stability against the 320 kHz gain-bandwidth product. Add a small isolation resistor where the source capacitance could interact with amplifier input capacitance. For sensitive signals, maintain a single-point ground reference and avoid routing output and high-impedance input paths in parallel.
Use the manufacturer's 8-pin PDIP pin-description table when assigning tracks and keep the DIP outline and hole spacing unchanged. The through-hole package permits easy replacement and inspection, but its lead spacing and body width require more board area than a surface-mount dual op amp. Confirm component orientation against the pin-1 marking before assembly.
合規資訊
Compliance attributes were not explicitly identified in the retrieved manufacturer and distributor records. Confirm current environmental and material declarations with Texas Instruments for the exact orderable part.