Texas Instruments

TLV2770CD - 5.1MHz RRO Op Amp | Texas Instruments

部品番号: TLV2770CD ✓ 生産中
2.7 V Vdss 8-SOIC, 3.90 mm width Package
MOQ: 1 |

TLV2770CD 概要

The Texas Instruments TLV2770CD is a single, rail-to-rail-output CMOS operational amplifier with a 2.7 V minimum supply, 5.5 V maximum supply, 5.1 MHz gain-bandwidth product, and 10.5 V/µs slew rate. The device also includes shutdown capability and is packaged in an 8-pin SOIC. These characteristics place it between the TLV2770 family’s precision-focused CMOS architecture and the requirements of high-speed signal-conditioning systems.

A CMOS operational amplifier is a voltage-controlled, differential-input amplifier used to buffer, amplify, filter, or compare analog signals. Its place in the signal-chain hierarchy is signal conditioning within a larger analog or mixed-signal system. Rail-to-rail output capability allows the output to approach the supply rails more closely than a conventional fixed-output amplifier, improving dynamic range in low-voltage systems where every millivolt of signal headroom matters.

The TLV2770CD’s principal features include its 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, and rail-to-rail output operation. The 5.1 MHz bandwidth supports higher-frequency closed-loop designs than low-frequency precision amplifiers, while the 10.5 V/µs slew rate improves response to large, fast input steps. Its single-amplifier configuration reduces board area in designs that need one independent high-speed channel. A shutdown function can also reduce power use when the signal path is not required continuously.

The TLV277x family combines CMOS power characteristics with rail-to-rail output swing, high output drive, and strong DC precision. The TLV2770 differs from related family members by retaining shutdown functionality, making power management an important distinction during replacement. Because the amplifier operates from a maximum 5.5 V supply, it is primarily intended for low-voltage systems and should not be treated as a direct replacement for an op amp rated for substantially higher supply voltages.

Typical uses include active filtering, sensor signal conditioning, low-voltage data acquisition, audio and communication interfaces, and general-purpose analog amplification. The combination of 5.1 MHz bandwidth and 10.5 V/µs slew rate is useful when the signal must be amplified without adding excessive delay. The shutdown feature also makes the device suitable for portable equipment and partitioned analog systems that can disable an inactive channel.

For layout, place the amplifier near the source and load to minimize trace capacitance and interference, and provide a solid ground reference. Decoupling capacitors should be connected close to the supply pins. Before using shutdown in a new design, consult the manufacturer pin description and truth table to confirm the required control level and operating state.

This page combines the TLV2770CD’s principal technical characteristics, verified sourcing information, drop-in replacement analysis, application guidance, and design notes. It is intended to help engineers assess bandwidth, supply voltage, shutdown behavior, package compatibility, and PCB integration before committing the amplifier to a production design.

ドロップイン代替品: TLV2770CD — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

TLV2770CDG4

✅ ドロップイン
📦 8-SOIC
Identical 5.1 MHz bandwidth, 10.5 V/µs slew rate, 2.7 V to 5.5 V supply range, and 8-SOIC footprint; G4 is a distinct orderable suffix that must be confirmed for lifecycle and qualification requirements.

📋 参考代替品(カタログ未掲載)

TLV2770CD 最大定格&電気的特性

Number of Amplifiers 1 circuit
Minimum Supply Voltage 2.7 V
Maximum Supply Voltage 5.5 V
Gain-Bandwidth Product 5.1 MHz
Slew Rate 10.5 V/µs
Output Swing Rail-to-rail
Shutdown Control Yes
パッケージ 8-SOIC, 3.90 mm width
実装タイプ Surface mount
Device Description CMOS operational amplifier with shutdown

TLV2770CD 8-soic, 3.90 mm width ピン配置ガイド

TLV2770CD (8-soic, 3.90 mm width パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

TLV2770CD の 8-soic, 3.90 mm width パッケージピン配置図

詳細なピン配置データはありません: TLV2770CD.

詳細は データシート をご参照ください。

主な用途

TLV2770CD の用途: 6 件s: Low-Voltage Sensor Signal Conditioning, Active Audio and Communication Filtering, Portable and Battery-Powered Instrumentation, Industrial Data-Acquisition Front Ends, General-Purpose Low-Voltage Amplification, Precision Reference and Buffering Stages.

🧩

Low-Voltage Sensor Signal Conditioning

The TLV2770CD fits sensor interfaces that require more bandwidth than a slow precision amplifier but operate from a 5 V or similarly low supply. Its 5.1 MHz gain-bandwidth product supports responsive filtering and gain stages, while the 10.5 V/µs slew rate helps preserve signal shape when sensor outputs change quickly. Rail-to-rail output increases the available range near the supply limits. The shutdown input can disable the channel when the sensor or measurement chain is inactive, reducing system activity without removing the amplifier from the board.

🎧

Active Audio and Communication Filtering

The TLV2770CD is appropriate for active filtering and small-signal conditioning in low-voltage audio or communication paths. Its 5.1 MHz gain-bandwidth product provides useful bandwidth for first- and second-order filter stages, and the 10.5 V/µs slew rate supports larger signal transitions without the sluggish response associated with low-bandwidth amplifiers. The rail-to-rail output can improve utilization of a low-voltage signal range. Shutdown provides an additional option for portable or partitioned systems where an inactive channel does not need to remain powered.

💊

Portable and Battery-Powered Instrumentation

The TLV2770CD can serve as the active element in compact, battery-powered instrumentation because it supports operation down to 2.7 V and includes a shutdown function. A 5.1 MHz bandwidth amplifier can condition rapidly changing sensor or diagnostic signals, while the 10.5 V/µs slew rate helps maintain low distortion through required gain stages. The single-channel 8-SOIC package reduces board footprint, and shutdown allows the signal chain to be disabled when measurements are not being taken. Supply current and noise must still be checked against the instrument’s battery budget.

🏭

Industrial Data-Acquisition Front Ends

The TLV2770CD is suitable for the first amplification stage of a low-voltage industrial data-acquisition channel when faster response is more important than very low offset voltage. Its 5.1 MHz gain-bandwidth product allows acquisition paths to handle moderate-frequency content, while 10.5 V/µs slew rate reduces distortion on larger transient signals. Rail-to-rail output improves headroom in 3.3 V and 5 V systems. The shutdown pin can support segmented front ends, although industrial qualification requirements must be checked for each specific ordering option.

🔧

General-Purpose Low-Voltage Amplification

The TLV2770CD works as a general-purpose amplifier for 2.7 V to 5.5 V systems requiring a single high-speed channel. Its 5.1 MHz gain-bandwidth product and 10.5 V/µs slew rate give designers more bandwidth and response speed than precision-only amplifiers, while the 8-SOIC package remains straightforward to route on conventional PCB technology. Rail-to-rail output increases available signal range, and shutdown can be used in systems that periodically disable the amplifier. Input offset, noise, bias current, and common-mode limits should be checked for precision-sensitive nodes.

📺

Precision Reference and Buffering Stages

The TLV2770CD can buffer low-level analog nodes when the design requires more bandwidth and slew-rate headroom than conventional precision buffers provide. Its 5.1 MHz gain-bandwidth product reduces the bandwidth penalty associated with high closed-loop gain, and the 10.5 V/µs slew rate supports faster settling after input changes. Rail-to-rail output makes it useful in restricted low-voltage ranges. For reference-generation or instrumentation applications, verify input offset voltage, input bias current, noise, and output load capability before treating it as a precision-reference buffer.

おすすめ製品の概要

TLV2770CD Texas Instruments 使用用途: Low-Voltage Sensor Signal Conditioning, Active Audio and Communication Filtering, Portable and Battery-Powered Instrumentation, Industrial Data-Acquisition Front Ends, General-Purpose Low-Voltage Amplification, Precision Reference and Buffering Stages OPA726 Related high-speed amplifier with different shutdown behavior 使用用途: Low-Voltage Sensor Signal Conditioning, Portable and Battery-Powered Instrumentation TLV2442CDR Low-voltage operational-amplifier family 使用用途: Low-Voltage Sensor Signal Conditioning, Industrial Data-Acquisition Front Ends TLV2770AIDG4 TLV2770-family amplifier in an 8-pin VSSOP package 使用用途: Active Audio and Communication Filtering, Precision Reference and Buffering Stages OPA725 Related amplifier option without shutdown 使用用途: Active Audio and Communication Filtering, General-Purpose Low-Voltage Amplification TLV2432AID Low-voltage precision amplifier family 使用用途: Portable and Battery-Powered Instrumentation, Precision Reference and Buffering Stages TLV2770CDG4 Same-family orderable alternative 使用用途: Industrial Data-Acquisition Front Ends TLV2771 Related TLV277x amplifier without shutdown 使用用途: General-Purpose Low-Voltage Amplification
What are the key specifications of TLV2770CD that engineers should know?
The TLV2770CD is a single-channel CMOS operational amplifier with a 2.7 V to 5.5 V supply range, 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, rail-to-rail output, and shutdown capability in an 8-SOIC package. According to the Texas Instruments TLV2770 product documentation, the combination supports general-purpose signal conditioning within low-voltage systems. The shutdown function differentiates it from related amplifier options that lack that control, while the single amplifier saves board space where only one independent channel is required.
What is the operating voltage range of TLV2770CD?
The TLV2770CD operates from 2.7 V to 5.5 V. According to the Texas Instruments TLV2770 documentation, this is a low-voltage amplifier intended for systems whose supply rails remain within that range. The maximum operating voltage must not be exceeded during transients or supply sequencing. Component values and external circuitry should also be checked against the minimum supply because gain, output swing, and bias-current behavior can depend on the common supply voltage.
What is the bandwidth and slew rate of TLV2770CD?
The TLV2770CD provides a 5.1 MHz gain-bandwidth product and a 10.5 V/µs slew rate. These figures make it suitable for moderate-frequency filtering, buffering, and signal amplification rather than very low-frequency precision-only applications. Texas Instruments identifies both specifications as principal characteristics of the TLV2770 family. Closed-loop bandwidth will depend on the selected noise-gain topology, while large-signal response will also be influenced by output loading and available output-current capability.
Does TLV2770CD have rail-to-rail output?
Yes, the TLV2770CD has rail-to-rail output capability. According to the Texas Instruments TLV2770 product documentation, the output can swing close to the supply rails, which increases usable output range in low-voltage designs. This is particularly useful when the signal is amplified into a limited headroom region. The datasheet’s output-swing and recommended-load graphs should be consulted for the precise limits at a given supply voltage, output current, and temperature.
Where can I download the TLV2770CD datasheet PDF?
The official TLV2770CD documentation is available through the Texas Instruments TLV2770 product page at https://www.ti.com/product/TLV2770. The manufacturer’s technical documents provide the detailed electrical characteristics, pin descriptions, typical application circuits, and ordering information. Use the device-specific document associated with the TLV2770 family and confirm that the electrical limits apply to the TLV2770CD ordering option, particularly the supply range, shutdown behavior, and package dimensions.
Where can I find the TLV2770CD pinout?
The TLV2770CD pin assignments are defined in the pin-configuration section of the Texas Instruments TLV2770 family documentation. It is an 8-SOIC device with one amplifier channel and a shutdown-control function. Use the manufacturer’s pin-description table when assigning PCB tracks because shutdown polarity and input-versus-output pin positions must be confirmed against the exact package drawing. The public TLV2770 product page is the appropriate starting point for the official PDF and related package information.
Where to buy TLV2770CD online?
Use the Request a Quote form on this page to request TLV2770CD availability, order quantity, and a current quotation. The form connects the request with XAIPART rather than presenting a static commercial figure that may become outdated. For complete design traceability, identify the exact 8-SOIC ordering code TLV2770CD when requesting the quote and confirm whether the required quantity is in production, prototype, or maintenance-buy quantities.
What is the price of TLV2770CD?
The current commercial price for TLV2770CD should be obtained through the Request a Quote form on this page. Quote requests can reflect quantity, packaging, and procurement requirements more accurately than a single static price. Specify the number of pieces, target delivery timing, and required shipment destination so the quotation can be aligned with the project. Do not substitute a distributor price for the same device without checking its suffix, package, and orderable condition.
What is the lead time for TLV2770CD?
Request the current lead time for TLV2770CD through the Request a Quote form on this page. Lead time can vary with order quantity, production scheduling, and required packaging, so it should be confirmed for the exact order configuration. Include the requested delivery date and quantity in the inquiry. If the amplifier is needed for an ongoing production line rather than a prototype, specify that requirement explicitly when requesting the quotation.
Is TLV2770CD in stock?
Use the Request a Quote form on this page to request current TLV2770CD stock and scheduled availability. The form is the appropriate route for a confirmed quantity rather than relying on an unverified stock indication. State the required order quantity, package format, and delivery target so the response reflects the actual procurement request. For ongoing designs, also request a replenishment or scheduled-supply option when repeated production demand is expected.
What is the best drop-in replacement for TLV2770CD?
TLV2770CDG4 is the closest same-package drop-in candidate identified for TLV2770CD because it retains the amplifier family and 8-SOIC configuration. According to Texas Instruments ordering information associated with the family, the G4 designation identifies a different orderable version, so the package pinout and shutdown function should be confirmed before substitution. No other substitute should be treated as drop-in without verifying the complete pin description and electrical limits in the manufacturer documentation.
Can TLV2770CDG4 replace TLV2770CD?
TLV2770CDG4 can be considered for a drop-in review because it uses the same TLV2770 amplifier family and 8-SOIC package. The G4 version should be confirmed against the TLV2770CD pin description, electrical characteristics, and orderable status before production use. According to the Texas Instruments TLV2770 documentation, the family shares core amplifier characteristics, but suffix-specific conditions and qualification details must be checked. This recommendation applies to footprint compatibility, not automatic approval of every application requirement.
What can replace TLV2770CD?
TLV2770CDG4 is the most direct drop-in replacement candidate for TLV2770CD because it shares the TLV2770 family and 8-SOIC package. A second source may require changes to the shutdown-control connection, so OPA726 and OPA725 should not be treated as automatic replacements even though their related interface characteristics can be similar. According to Texas Instruments support guidance, shutdown pins on the OPA726 differ from those on the TLV2770, making control compatibility the decisive issue.
When should I choose TLV2770CD over TLV2771CD?
Choose TLV2770CD when the design requires an active shutdown-control function and operates from the TLV2770’s low-voltage range. Texas Instruments support guidance states that the TLV2771 has no shutdown, while the TLV2770 retains shutdown capability. If a replacement is intended for an existing board, the TLV2770 is therefore the more appropriate same-family choice. Conversely, OPA725 and TLV2771 may suit a redesigned circuit in which shutdown control is unnecessary, but compatibility must be checked at the pin level.
Is TLV2770CD suitable for a 5 V sensor signal-conditioning circuit?
The TLV2770CD is suitable for a 5 V sensor signal-conditioning circuit when the signals, bandwidth, output loading, and common-mode range remain within its operating limits. Its 2.7 V to 5.5 V supply range, 5.1 MHz bandwidth, 10.5 V/µs slew rate, and rail-to-rail output provide useful performance for low-voltage conditioning. The Texas Instruments TLV2770 documentation should be used to verify the input common-mode range and sensor source impedance before finalizing the amplifier configuration.
What is the best cross-brand equivalent for TLV2770CD?
No cross-brand drop-in equivalent for TLV2770CD is established on this page. A valid cross-brand replacement must preserve the 8-SOIC footprint, pin functions, shutdown behavior, 2.7 V to 5.5 V supply range, 5.1 MHz bandwidth, and approximately 10.5 V/µs slew rate. Texas Instruments’ official cross-reference search can be used to locate and compare candidate devices, but the manufacturer pin description and electrical tables must confirm interchangeability before PCB or firmware assumptions are changed.

エンジニアリング参考データ: TLV2770CD — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the TLV2770CD for a low-voltage, single-channel signal path that benefits from 5.1 MHz bandwidth, 10.5 V/µs slew rate, rail-to-rail output, and active shutdown. It is especially suitable for 2.7 V to 5.5 V sensor, filtering, data-acquisition, and general-purpose analog systems. Select TLV2770CDG4 as the closest same-package same-family drop-in candidate when its orderable status and qualification requirements are acceptable. Consider the TLV2771 when shutdown is unnecessary and its pin configuration and electrical limits suit the design. OPA725 and OPA726 may offer related performance, but they are not automatic drop-ins for this circuit because the shutdown-related pin behavior differs. For any substitution, verify supply voltage, input common-mode range, output swing, bandwidth, slew rate, stability, and the manufacturer pin-description table before releasing production artwork.

代替品との比較

パラメータ この製品 TLV2770CDG4
Brand Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC
Number of Amplifiers 1 circuit 1 circuit
Minimum Supply Voltage 2.7 V 2.7 V
Maximum Supply Voltage 5.5 V 5.5 V
Gain-Bandwidth Product 5.1 MHz 5.1 MHz
Slew Rate 10.5 V/µs 10.5 V/µs
Output Swing Rail-to-rail Rail-to-rail
Shutdown Control Yes Yes

主な差別化要因

  • Retains active shutdown control (vs TLV2771)
  • Combines 5.1 MHz bandwidth with 10.5 V/µs slew rate (vs TLV2442CDR)
  • Single-channel operation reduces board space (vs OPA725)

設計ノート

Route the op-amp input, output, supply, and ground connections with short traces and a continuous ground reference. Place supply-decoupling capacitors close to the device power pins and connect them to the same ground plane used by the signal source and load. Long input traces can increase noise pickup and parasitic capacitance, which becomes more consequential as closed-loop gain or operating frequency increases. Use the manufacturer pinout to preserve the functional assignment of every 8-SOIC lead.

Operate the TLV2770CD only within its 2.7 V to 5.5 V supply range and verify startup and shutdown behavior against the family truth table. The shutdown control should not be left floating if its state must remain defined. When the amplifier drives a capacitive or resistive load, confirm that the load current and resulting output disturbance remain within the electrical-characteristics limits. For portable systems, compare the shutdown-state behavior with the continuous operating current before estimating battery life.

Choose the feedback network for the intended closed-loop gain and bandwidth rather than relying only on the 5.1 MHz gain-bandwidth product. The 10.5 V/µs slew rate improves large-signal response, but it does not guarantee acceptable settling, distortion, or stability in every topology. Keep the summing node compact, use resistors with suitable noise and tolerance characteristics, and simulate the complete filter or amplifier stage with the intended source and load impedances.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The exact TLV2770CD orderable-device compliance statements should be confirmed from the Texas Instruments product documentation and orderable part information.

データ検証日: 2026-11-15 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

TLV2770CD datasheet TLV2770CD datasheet pdf TLV2770CD pinout TLV2770CD specifications Texas Instruments TLV2770CD TLV2770CD 5.1MHz TLV2770CD 10.5V/us TLV2770CD 8-SOIC TLV2770CD replacement TLV2770CD equivalent TLV2770CD drop-in replacement TLV2770CD vs TLV2771 TLV2770CD price TLV2770CD stock TLV2770CD sensor signal conditioning

関連部品&用語

Texas Instruments TLV2770CD TLV2770CDG4 TLV2771 OPA725 OPA726 TLV2442CDR TLV2432AID operational amplifier CMOS operational amplifier signal conditioning voltage amplifier analog signal rail-to-rail output gain-bandwidth product slew rate shutdown control low-voltage operation 8-SOIC SOIC package family surface-mount package active filter sensor interface data acquisition RoHS REACH AEC-Q100
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示