TLV2770CD - 5.1MHz RRO Op Amp | Texas Instruments
MPN: TLV2770CD ✓ Hoạt độngTLV2770CD Tóm tắt
A CMOS operational amplifier is a voltage-controlled, differential-input amplifier used to buffer, amplify, filter, or compare analog signals. Its place in the signal-chain hierarchy is signal conditioning within a larger analog or mixed-signal system. Rail-to-rail output capability allows the output to approach the supply rails more closely than a conventional fixed-output amplifier, improving dynamic range in low-voltage systems where every millivolt of signal headroom matters.
The TLV2770CD’s principal features include its 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, and rail-to-rail output operation. The 5.1 MHz bandwidth supports higher-frequency closed-loop designs than low-frequency precision amplifiers, while the 10.5 V/µs slew rate improves response to large, fast input steps. Its single-amplifier configuration reduces board area in designs that need one independent high-speed channel. A shutdown function can also reduce power use when the signal path is not required continuously.
The TLV277x family combines CMOS power characteristics with rail-to-rail output swing, high output drive, and strong DC precision. The TLV2770 differs from related family members by retaining shutdown functionality, making power management an important distinction during replacement. Because the amplifier operates from a maximum 5.5 V supply, it is primarily intended for low-voltage systems and should not be treated as a direct replacement for an op amp rated for substantially higher supply voltages.
Typical uses include active filtering, sensor signal conditioning, low-voltage data acquisition, audio and communication interfaces, and general-purpose analog amplification. The combination of 5.1 MHz bandwidth and 10.5 V/µs slew rate is useful when the signal must be amplified without adding excessive delay. The shutdown feature also makes the device suitable for portable equipment and partitioned analog systems that can disable an inactive channel.
For layout, place the amplifier near the source and load to minimize trace capacitance and interference, and provide a solid ground reference. Decoupling capacitors should be connected close to the supply pins. Before using shutdown in a new design, consult the manufacturer pin description and truth table to confirm the required control level and operating state.
This page combines the TLV2770CD’s principal technical characteristics, verified sourcing information, drop-in replacement analysis, application guidance, and design notes. It is intended to help engineers assess bandwidth, supply voltage, shutdown behavior, package compatibility, and PCB integration before committing the amplifier to a production design.
Bộ thay thế dễ dàng lắp đặt cho TLV2770CD — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
TLV2770CDG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TLV2770CD Tỷ lệ tối đa & tính chất điện
| Number of Amplifiers | 1 circuit |
| Minimum Supply Voltage | 2.7 V |
| Maximum Supply Voltage | 5.5 V |
| Gain-Bandwidth Product | 5.1 MHz |
| Slew Rate | 10.5 V/µs |
| Output Swing | Rail-to-rail |
| Shutdown Control | Yes |
| Hộp | 8-SOIC, 3.90 mm width |
| Kiểu lắp đặt | Surface mount |
| Device Description | CMOS operational amplifier with shutdown |
Hướng dẫn cấu hình chân TLV2770CD 8-soic, 3.90 mm width
Cấu hình chân cho TLV2770CD (8-soic, 3.90 mm width gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho TLV2770CD.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TLV2770CD phù hợp cho 6 Áp dụngs: Low-Voltage Sensor Signal Conditioning, Active Audio and Communication Filtering, Portable and Battery-Powered Instrumentation, Industrial Data-Acquisition Front Ends, General-Purpose Low-Voltage Amplification, Precision Reference and Buffering Stages.
Low-Voltage Sensor Signal Conditioning
The TLV2770CD fits sensor interfaces that require more bandwidth than a slow precision amplifier but operate from a 5 V or similarly low supply. Its 5.1 MHz gain-bandwidth product supports responsive filtering and gain stages, while the 10.5 V/µs slew rate helps preserve signal shape when sensor outputs change quickly. Rail-to-rail output increases the available range near the supply limits. The shutdown input can disable the channel when the sensor or measurement chain is inactive, reducing system activity without removing the amplifier from the board.
Được đề xuất
Active Audio and Communication Filtering
The TLV2770CD is appropriate for active filtering and small-signal conditioning in low-voltage audio or communication paths. Its 5.1 MHz gain-bandwidth product provides useful bandwidth for first- and second-order filter stages, and the 10.5 V/µs slew rate supports larger signal transitions without the sluggish response associated with low-bandwidth amplifiers. The rail-to-rail output can improve utilization of a low-voltage signal range. Shutdown provides an additional option for portable or partitioned systems where an inactive channel does not need to remain powered.
Được đề xuất
Portable and Battery-Powered Instrumentation
The TLV2770CD can serve as the active element in compact, battery-powered instrumentation because it supports operation down to 2.7 V and includes a shutdown function. A 5.1 MHz bandwidth amplifier can condition rapidly changing sensor or diagnostic signals, while the 10.5 V/µs slew rate helps maintain low distortion through required gain stages. The single-channel 8-SOIC package reduces board footprint, and shutdown allows the signal chain to be disabled when measurements are not being taken. Supply current and noise must still be checked against the instrument’s battery budget.
Được đề xuất
Industrial Data-Acquisition Front Ends
The TLV2770CD is suitable for the first amplification stage of a low-voltage industrial data-acquisition channel when faster response is more important than very low offset voltage. Its 5.1 MHz gain-bandwidth product allows acquisition paths to handle moderate-frequency content, while 10.5 V/µs slew rate reduces distortion on larger transient signals. Rail-to-rail output improves headroom in 3.3 V and 5 V systems. The shutdown pin can support segmented front ends, although industrial qualification requirements must be checked for each specific ordering option.
Được đề xuất
General-Purpose Low-Voltage Amplification
The TLV2770CD works as a general-purpose amplifier for 2.7 V to 5.5 V systems requiring a single high-speed channel. Its 5.1 MHz gain-bandwidth product and 10.5 V/µs slew rate give designers more bandwidth and response speed than precision-only amplifiers, while the 8-SOIC package remains straightforward to route on conventional PCB technology. Rail-to-rail output increases available signal range, and shutdown can be used in systems that periodically disable the amplifier. Input offset, noise, bias current, and common-mode limits should be checked for precision-sensitive nodes.
Được đề xuất
Precision Reference and Buffering Stages
The TLV2770CD can buffer low-level analog nodes when the design requires more bandwidth and slew-rate headroom than conventional precision buffers provide. Its 5.1 MHz gain-bandwidth product reduces the bandwidth penalty associated with high closed-loop gain, and the 10.5 V/µs slew rate supports faster settling after input changes. Rail-to-rail output makes it useful in restricted low-voltage ranges. For reference-generation or instrumentation applications, verify input offset voltage, input bias current, noise, and output load capability before treating it as a precision-reference buffer.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TLV2770CD — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TLV2770CDG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 8-SOIC | 8-SOIC |
| Number of Amplifiers | 1 circuit | 1 circuit |
| Minimum Supply Voltage | 2.7 V | 2.7 V |
| Maximum Supply Voltage | 5.5 V | 5.5 V |
| Gain-Bandwidth Product | 5.1 MHz | 5.1 MHz |
| Slew Rate | 10.5 V/µs | 10.5 V/µs |
| Output Swing | Rail-to-rail | Rail-to-rail |
| Shutdown Control | Yes | Yes |
Bảo phân biệt quan trọng
- Retains active shutdown control (vsTLV2771)
- Combines 5.1 MHz bandwidth with 10.5 V/µs slew rate (vsTLV2442CDR)
- Single-channel operation reduces board space (vsOPA725)
Ghi chú thiết kế
Route the op-amp input, output, supply, and ground connections with short traces and a continuous ground reference. Place supply-decoupling capacitors close to the device power pins and connect them to the same ground plane used by the signal source and load. Long input traces can increase noise pickup and parasitic capacitance, which becomes more consequential as closed-loop gain or operating frequency increases. Use the manufacturer pinout to preserve the functional assignment of every 8-SOIC lead.
Operate the TLV2770CD only within its 2.7 V to 5.5 V supply range and verify startup and shutdown behavior against the family truth table. The shutdown control should not be left floating if its state must remain defined. When the amplifier drives a capacitive or resistive load, confirm that the load current and resulting output disturbance remain within the electrical-characteristics limits. For portable systems, compare the shutdown-state behavior with the continuous operating current before estimating battery life.
Choose the feedback network for the intended closed-loop gain and bandwidth rather than relying only on the 5.1 MHz gain-bandwidth product. The 10.5 V/µs slew rate improves large-signal response, but it does not guarantee acceptable settling, distortion, or stability in every topology. Keep the summing node compact, use resistors with suitable noise and tolerance characteristics, and simulate the complete filter or amplifier stage with the intended source and load impedances.
Thông tin tuân thủ
The exact TLV2770CD orderable-device compliance statements should be confirmed from the Texas Instruments product documentation and orderable part information.