TNPW060383K5BEEA - 83.5 kOhm 0.1% Thin Film Resistor | Vishay
部品番号: TNPW060383K5BEEA ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0.74 | $0.74 |
| 10 | $0.66 | $6.60 |
| 100 | $0.55 | $55.00 |
| 500 | $0.42 | $210.00 |
| 1,000 | $0.36 | $360.00 |
TNPW060383K5BEEA 概要
A thin-film chip resistor is a passive component whose resistive element is a sputtered metal-alloy film (nickel-raseless or NiCr-based) deposited on a ceramic alumina substrate. Compared to thick-film chip resistors, thin-film technology offers tighter absolute tolerance (often ±0.1% or better), lower temperature coefficient of resistance (TCR, often 25 ppm/°C or 5 ppm/°C for premium grades), and markedly lower parasitic inductance and noise. These attributes place thin-film resistors in the precision-resistor category used where thick-film ±1% or ±5% parts would introduce unacceptable error. Within the resistor taxonomy, this part belongs to the family thin-film resistor -> chip resistor -> SMD resistor -> passive component.
Key specifications include 83.5 kOhm resistance, ±0.1% tolerance, 25 ppm/°C TCR, 0.21 W power rating (Vishay datasheet value; the 1/10 W figure from Mouser reflects a more conservative EIA-rated figure), anti-sulfur construction per Vishay's automotive-grade qualification, AEC-Q200 automotive qualification, and lead-free (Pb-free) reflow-compatible terminations. The part is qualified against JEDEC JESD97 paragraph 3.5 for Pb content below 0.1% by weight in the termination material.
The 0603 (1608 metric) case size measures 1.55 mm × 0.85 mm × 0.45 mm and is one of the most widely-used SMD footprints. Vishay's TNPW e3 series combines this standard footprint with thin-film stability, enabling the part to be specified in precision analog signal paths, automotive ECUs, and instrumentation front-ends without altering board layout versus conventional thick-film 0603 resistors.
Typical applications include precision voltage dividers, gain-setting resistors in op-amp circuits, current-sense reference networks, ADC/DAC reference ladders, automotive sensor signal conditioning, instrumentation amplifier gain networks, and bridge-circuit completion resistors. The AEC-Q200 qualification makes the device directly usable in under-hood and chassis automotive electronics.
A key design consideration is that the 0.1% tolerance and 25 ppm/°C TCR deliver precision only when the resistor is operated well below its rated power; power derating above 70°C ambient is required to keep self-heating drift within the published TCR envelope. For best stability, maintain dissipation below ~50% of rated power in precision divider positions.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: TNPW060383K5BEEA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: TNPW060383K5BEEA （同一形状・フットプリント） — 相違点: Operating Temperature, Resistance, Temperature Coefficient (TCR).
クイック比較ツール — 並列比較する代替部品を選択:
TNPW060357K6BEEA
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
TNPW0603100KBEEA
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
TNPW060382K5BEEA
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
RT0603BRD0783K5L
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ERA-3AEB8351V
✅ ドロップイン📋 参考代替品（カタログ未掲載）
RG1608N-8351-W-T1
✅ ドロップイン📋 参考代替品（カタログ未掲載）
RP73PF1J83K5BTDF
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TNPW060383K5BEEA 最大定格＆電気的特性
| Resistance | 83.5 kOhm |
| Tolerance | ±0.1% |
| Power Rating | 0.21 W (1/8 W) |
| Maximum Working Voltage | 75 V |
| Temperature Coefficient (TCR) | 25 ppm/°C |
| パッケージ / ケース | 0603 (1608 Metric) |
| 実装タイプ | Surface Mount |
| Resistor Element Type | Thin Film |
| Anti-Sulfur | Yes (per Vishay datasheet) |
| Automotive Qualification | AEC-Q200 |
| 動作温度 | -55°C to +155°C |
| Dimensions | 1.55 mm × 0.85 mm × 0.45 mm |
| Termination Style | Solder pads (Pb-free) |
| RoHS ステータス | Compliant |
| MSLレベル | MSL 1 (unlimited floor life) |
TNPW060383K5BEEA ピン構成
| ピン 1 | Terminal 1 — Solder pad — one side of resistive element |
| ピン 2 | Terminal 2 — Solder pad — other side of resistive element |
主な用途
TNPW060383K5BEEA の用途: 7 件s: Precision Voltage Divider, Op-Amp Gain-Setting Resistor, Automotive Sensor Signal Conditioning, ADC/DAC Reference Ladder, Instrumentation Amplifier Gain Network, Current-Sense Reference Network, Test and Measurement Instrumentation.
Precision Voltage Divider
The TNPW060383K5BEEA's 83.5 kΩ ±0.1% tolerance and 25 ppm/°C TCR make it ideal for precision voltage-divider networks in analog signal-conditioning front-ends. In a typical divider, the part pairs with a low-TC reference resistor to scale high-voltage sensor outputs down to ADC-compatible ranges; the 0.1% absolute tolerance guarantees divider ratio accuracy within ±0.1% before trimming, while the 25 ppm/°C TCR keeps the ratio stable across -40°C to +125°C automotive temperature excursions. The 0603 footprint enables direct PCB reuse from thick-film designs, and the AEC-Q200 qualification allows deployment in under-hood sensor conditioning without additional qualification cycles.
おすすめ
Op-Amp Gain-Setting Resistor
The TNPW060383K5BEEA serves as the feedback or input resistor in precision op-amp gain stages where ±0.1% tolerance directly determines closed-loop gain accuracy. In non-inverting or inverting configurations with amplifiers such as the OPA2277 or AD8628, the 83.5 kΩ value sets gain ratios when paired with a complementary thin-film resistor; the 25 ppm/°C TCR ensures gain drift stays below 50 ppm/°C across industrial temperature ranges. The 75 V working voltage comfortably handles supply-rail-derived input signals, and the 0.21 W power rating supports continuous operation at typical signal levels without derating.
おすすめ
Automotive Sensor Signal Conditioning
The TNPW060383K5BEEA is specifically qualified to AEC-Q200 with anti-sulfur construction, making it a strong fit for automotive sensor signal-conditioning networks in ECU inputs. Typical placements include Wheatstone bridge completion resistors for pressure or strain-gauge sensors, current-sense reference networks in battery-management systems, and pull-up/pull-down networks for thermistor biasing. The 25 ppm/°C TCR limits temperature-induced calibration drift over the automotive -40°C to +125°C range, while the anti-sulfur termination prevents resistance shift in sulfur-rich under-hood atmospheres where standard thick-film resistors would fail.
おすすめ
ADC/DAC Reference Ladder
The TNPW060383K5BEEA's tight ±0.1% tolerance and 25 ppm/°C TCR suit it for use in ADC and DAC reference voltage ladders where resistor matching determines conversion linearity. In a 16-bit SAR ADC reference ladder or a R-2R DAC network, the 83.5 kΩ value provides mid-range impedance that balances reference-current draw against noise pickup; the 0.1% tolerance keeps gain error within 1 LSB at 10-bit resolution, and the 25 ppm/°C TCR preserves monotonicity across operating-temperature changes. The 0603 footprint integrates cleanly with standard precision-ADC eval-board layouts without requiring footprint adaptation.
おすすめ
Instrumentation Amplifier Gain Network
The TNPW060383K5BEEA is commonly deployed as the gain-setting resistor in discrete three-op-amp instrumentation amplifiers where the value sets the differential gain directly. With 83.5 kΩ, the part pairs with a precision thin-film resistor on the RG pin of an INA128 or AD620 to set gains of 1 + 49.4 kΩ/RG; the 0.1% tolerance contributes only ±0.1% to overall gain error, and the 25 ppm/°C TCR keeps CMRR stable across temperature. The 0603 case enables compact bridge-amplifier layouts for strain-gauge and biomedical-signal acquisition front-ends.
おすすめ
Current-Sense Reference Network
The TNPW060383K5BEEA's 83.5 kΩ value and ±0.1% tolerance suit it for high-side or low-side current-sense reference networks where the resistor sets gain or threshold in current-monitor circuits. In a typical current-sense amplifier application, the part provides a precision pull-down or pull-up reference for the current-sense amplifier's REF pin, directly determining measurement offset and accuracy. The 25 ppm/°C TCR limits calibration drift in industrial battery-management or motor-control systems; the 75 V working voltage allows operation on 48 V industrial bus rails with adequate headroom.
おすすめ
Test and Measurement Instrumentation
The TNPW060383K5BEEA is well-suited to test and measurement front-ends, including bench multimeters, oscilloscope input attenuators, and precision calibrators where ±0.1% absolute accuracy and 25 ppm/°C TCR directly impact instrument specification. The 0.21 W power rating supports continuous signal levels typical in laboratory instrumentation, while the 75 V working voltage handles direct ±50 V input attenuator designs. AEC-Q200 qualification is incidental here, but the precision performance and Vishay brand reliability make the part a strong choice for production test equipment designs.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TNPW060383K5BEEA — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TNPW060357K6BEEA | TNPW0603100KBEEA | TNPW060382K5BEEA | RT0603BRD0783K5L | ERA-3AEB8351V | RG1608N-8351-W-T1 | RP73PF1J83K5BTDF |
|---|---|---|---|---|---|---|---|---|
| Brand | Vishay Intertechnology | Vishay Intertechnology | Vishay Intertechnology | Vishay Intertechnology | Yageo | Panasonic | Susumu | TE Connectivity |
| Package | 0603 (1608 Metric) | 0603 (1608 Metric) - same | 0603 (1608 Metric) - same | 0603 (1608 Metric) - same | 0603 (1608 Metric) - same | 0603 (1608 Metric) - same | 0603 (1608 Metric) - same | 0603 (1608 Metric) - same |
| Resistance | 83.5 kΩ | 57.6 kΩ | 100 kΩ | 82.5 kΩ | 83.5 kΩ | 83.5 kΩ | 83.5 kΩ | 83.5 kΩ |
| Tolerance | ±0.1% | ±0.1% | ±0.1% | ±0.1% | ±0.1% | ±0.1% | ±0.1% | ±0.1% |
| TCR | 25 ppm/°C | 25 ppm/°C | 25 ppm/°C | 25 ppm/°C | 25 ppm/°C | 25 ppm/°C | 10 ppm/°C | 25 ppm/°C |
| Power Rating | 0.21 W | 0.21 W | 0.21 W | 0.21 W | 0.1 W | 0.1 W | 0.1 W | 0.2 W |
| Working Voltage | 75 V | 75 V | 75 V | 75 V | 75 V | 75 V | 75 V | 75 V |
| AEC-Q200 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
主な差別化要因
- Anti-sulfur automotive-grade thin film （vs RT0603BRD0783K5L (Yageo))
- Higher power rating for the same 0603 footprint （vs ERA-3AEB8351V (Panasonic))
- Tighter TCR option available in same footprint （vs RG1608N-8351-W-T1 (Susumu))
設計ノート
The TNPW060383K5BEEA is rated 0.21 W at 70°C ambient per Vishay's TNPW e3 datasheet, but must be derated linearly to 0 W at 155°C. Estimated: at 0.21 W dissipation in a still-air 70°C environment, junction temperature rise is approximately 60–80°C above ambient, depending on PCB copper-pour area. Maintain at least 50 mm² of 1 oz copper pad per Vishay's recommended land pattern to keep self-heating drift within the 25 ppm/°C TCR envelope. For continuous high-precision divider applications, derate to 0.1 W (50% of max) to minimize thermal EMF and resistance drift.
Use Vishay's recommended 0603 land pattern with solder-pad dimensions of 0.8 mm × 0.9 mm and pad-to-pad pitch of 1.5 mm. A reflow profile with peak temperature of 260°C (Pb-free) per JEDEC J-STD-020 is compatible with the TNPW e3 series. For precision divider networks, place the TNPW060383K5BEEA symmetrically with its pair resistor to minimize thermal-gradient-induced resistance mismatch; avoid routing high-current traces directly under or beside precision resistors to reduce thermal coupling.
Do not use the TNPW060383K5BEEA's 0.1% tolerance guarantee above 0.1 W dissipation without thermal verification — the 25 ppm/°C TCR applies only when self-heating is controlled. Anti-sulfur construction protects against H2S-rich environments but is not a substitute for conformal coating in salt-fog or condensing humidity conditions. Per the JEDEC JESD97 paragraph 3.5 reference cited by TTI, the termination contains less than 0.1% Pb by weight — the part is Pb-free and RoHS-compliant, but the historical 'Contains Pb' note refers to trace levels well below RoHS exemption thresholds. Verify this distinction when sourcing for Pb-free-only assemblies.
コンプライアンス情報
AEC-Q200 qualified (not AEC-Q100, as AEC-Q100 is for ICs, AEC-Q200 for passive components). Lead-free per JEDEC JESD97 paragraph 3.5 with termination Pb content below 0.1% by weight. Anti-sulfur construction per Vishay datasheet. Halogen-free status not explicitly stated in verified data — set to unknown.
