TNPW060383K5BEEA - 83.5 kOhm 0.1% Thin Film Resistor | Vishay
MPN: TNPW060383K5BEEA ✓ Hoạt độngTNPW060383K5BEEA Tóm tắt
A thin-film chip resistor is a passive component whose resistive element is a sputtered metal-alloy film (nickel-raseless or NiCr-based) deposited on a ceramic alumina substrate. Compared to thick-film chip resistors, thin-film technology offers tighter absolute tolerance (often ±0.1% or better), lower temperature coefficient of resistance (TCR, often 25 ppm/°C or 5 ppm/°C for premium grades), and markedly lower parasitic inductance and noise. These attributes place thin-film resistors in the precision-resistor category used where thick-film ±1% or ±5% parts would introduce unacceptable error. Within the resistor taxonomy, this part belongs to the family thin-film resistor -> chip resistor -> SMD resistor -> passive component.
Key specifications include 83.5 kOhm resistance, ±0.1% tolerance, 25 ppm/°C TCR, 0.21 W power rating (Vishay datasheet value; the 1/10 W figure from Mouser reflects a more conservative EIA-rated figure), anti-sulfur construction per Vishay's automotive-grade qualification, AEC-Q200 automotive qualification, and lead-free (Pb-free) reflow-compatible terminations. The part is qualified against JEDEC JESD97 paragraph 3.5 for Pb content below 0.1% by weight in the termination material.
The 0603 (1608 metric) case size measures 1.55 mm × 0.85 mm × 0.45 mm and is one of the most widely-used SMD footprints. Vishay's TNPW e3 series combines this standard footprint with thin-film stability, enabling the part to be specified in precision analog signal paths, automotive ECUs, and instrumentation front-ends without altering board layout versus conventional thick-film 0603 resistors.
Typical applications include precision voltage dividers, gain-setting resistors in op-amp circuits, current-sense reference networks, ADC/DAC reference ladders, automotive sensor signal conditioning, instrumentation amplifier gain networks, and bridge-circuit completion resistors. The AEC-Q200 qualification makes the device directly usable in under-hood and chassis automotive electronics.
A key design consideration is that the 0.1% tolerance and 25 ppm/°C TCR deliver precision only when the resistor is operated well below its rated power; power derating above 70°C ambient is required to keep self-heating drift within the published TCR envelope. For best stability, maintain dissipation below ~50% of rated power in precision divider positions.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho TNPW060383K5BEEA — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TNPW060383K5BEEA (cùng hình factor và footprint) — khác nhau ở Operating Temperature, Resistance, Temperature Coefficient (TCR).
TNPW060357K6BEEA
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TNPW0603100KBEEA
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TNPW060382K5BEEA
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
RT0603BRD0783K5L
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ERA-3AEB8351V
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
RG1608N-8351-W-T1
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
RP73PF1J83K5BTDF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TNPW060383K5BEEA Tỷ lệ tối đa & tính chất điện
| Resistance | 83.5 kOhm |
| Tolerance | ±0.1% |
| Power Rating | 0.21 W (1/8 W) |
| Maximum Working Voltage | 75 V |
| Temperature Coefficient (TCR) | 25 ppm/°C |
| Hộp / Vỏ | 0603 (1608 Metric) |
| Kiểu lắp đặt | Surface Mount |
| Resistor Element Type | Thin Film |
| Anti-Sulfur | Yes (per Vishay datasheet) |
| Automotive Qualification | AEC-Q200 |
| Nhiệt độ hoạt động | -55°C to +155°C |
| Dimensions | 1.55 mm × 0.85 mm × 0.45 mm |
| Termination Style | Solder pads (Pb-free) |
| Trạng thái RoHS | Compliant |
| Cấp MSL | MSL 1 (unlimited floor life) |
Cấu hình chân TNPW060383K5BEEA
| Chân 1 | Terminal 1 — Solder pad — one side of resistive element |
| Chân 2 | Terminal 2 — Solder pad — other side of resistive element |
Ứng dụng tiêu biểu
TNPW060383K5BEEA phù hợp cho 7 Áp dụngs: Precision Voltage Divider, Op-Amp Gain-Setting Resistor, Automotive Sensor Signal Conditioning, ADC/DAC Reference Ladder, Instrumentation Amplifier Gain Network, Current-Sense Reference Network, Test and Measurement Instrumentation.
Precision Voltage Divider
The TNPW060383K5BEEA's 83.5 kΩ ±0.1% tolerance and 25 ppm/°C TCR make it ideal for precision voltage-divider networks in analog signal-conditioning front-ends. In a typical divider, the part pairs with a low-TC reference resistor to scale high-voltage sensor outputs down to ADC-compatible ranges; the 0.1% absolute tolerance guarantees divider ratio accuracy within ±0.1% before trimming, while the 25 ppm/°C TCR keeps the ratio stable across -40°C to +125°C automotive temperature excursions. The 0603 footprint enables direct PCB reuse from thick-film designs, and the AEC-Q200 qualification allows deployment in under-hood sensor conditioning without additional qualification cycles.
Được đề xuất
Op-Amp Gain-Setting Resistor
The TNPW060383K5BEEA serves as the feedback or input resistor in precision op-amp gain stages where ±0.1% tolerance directly determines closed-loop gain accuracy. In non-inverting or inverting configurations with amplifiers such as the OPA2277 or AD8628, the 83.5 kΩ value sets gain ratios when paired with a complementary thin-film resistor; the 25 ppm/°C TCR ensures gain drift stays below 50 ppm/°C across industrial temperature ranges. The 75 V working voltage comfortably handles supply-rail-derived input signals, and the 0.21 W power rating supports continuous operation at typical signal levels without derating.
Được đề xuất
Automotive Sensor Signal Conditioning
The TNPW060383K5BEEA is specifically qualified to AEC-Q200 with anti-sulfur construction, making it a strong fit for automotive sensor signal-conditioning networks in ECU inputs. Typical placements include Wheatstone bridge completion resistors for pressure or strain-gauge sensors, current-sense reference networks in battery-management systems, and pull-up/pull-down networks for thermistor biasing. The 25 ppm/°C TCR limits temperature-induced calibration drift over the automotive -40°C to +125°C range, while the anti-sulfur termination prevents resistance shift in sulfur-rich under-hood atmospheres where standard thick-film resistors would fail.
Được đề xuất
ADC/DAC Reference Ladder
The TNPW060383K5BEEA's tight ±0.1% tolerance and 25 ppm/°C TCR suit it for use in ADC and DAC reference voltage ladders where resistor matching determines conversion linearity. In a 16-bit SAR ADC reference ladder or a R-2R DAC network, the 83.5 kΩ value provides mid-range impedance that balances reference-current draw against noise pickup; the 0.1% tolerance keeps gain error within 1 LSB at 10-bit resolution, and the 25 ppm/°C TCR preserves monotonicity across operating-temperature changes. The 0603 footprint integrates cleanly with standard precision-ADC eval-board layouts without requiring footprint adaptation.
Được đề xuất
Instrumentation Amplifier Gain Network
The TNPW060383K5BEEA is commonly deployed as the gain-setting resistor in discrete three-op-amp instrumentation amplifiers where the value sets the differential gain directly. With 83.5 kΩ, the part pairs with a precision thin-film resistor on the RG pin of an INA128 or AD620 to set gains of 1 + 49.4 kΩ/RG; the 0.1% tolerance contributes only ±0.1% to overall gain error, and the 25 ppm/°C TCR keeps CMRR stable across temperature. The 0603 case enables compact bridge-amplifier layouts for strain-gauge and biomedical-signal acquisition front-ends.
Được đề xuất
Current-Sense Reference Network
The TNPW060383K5BEEA's 83.5 kΩ value and ±0.1% tolerance suit it for high-side or low-side current-sense reference networks where the resistor sets gain or threshold in current-monitor circuits. In a typical current-sense amplifier application, the part provides a precision pull-down or pull-up reference for the current-sense amplifier's REF pin, directly determining measurement offset and accuracy. The 25 ppm/°C TCR limits calibration drift in industrial battery-management or motor-control systems; the 75 V working voltage allows operation on 48 V industrial bus rails with adequate headroom.
Được đề xuất
Test and Measurement Instrumentation
The TNPW060383K5BEEA is well-suited to test and measurement front-ends, including bench multimeters, oscilloscope input attenuators, and precision calibrators where ±0.1% absolute accuracy and 25 ppm/°C TCR directly impact instrument specification. The 0.21 W power rating supports continuous signal levels typical in laboratory instrumentation, while the 75 V working voltage handles direct ±50 V input attenuator designs. AEC-Q200 qualification is incidental here, but the precision performance and Vishay brand reliability make the part a strong choice for production test equipment designs.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TNPW060383K5BEEA — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TNPW060357K6BEEA | TNPW0603100KBEEA | TNPW060382K5BEEA | RT0603BRD0783K5L | ERA-3AEB8351V | RG1608N-8351-W-T1 | RP73PF1J83K5BTDF |
|---|---|---|---|---|---|---|---|---|
| Brand | Vishay Intertechnology | Vishay Intertechnology | Vishay Intertechnology | Vishay Intertechnology | Yageo | Panasonic | Susumu | TE Connectivity |
| Package | 0603 (1608 Metric) | 0603 (1608 Metric) - same | 0603 (1608 Metric) - same | 0603 (1608 Metric) - same | 0603 (1608 Metric) - same | 0603 (1608 Metric) - same | 0603 (1608 Metric) - same | 0603 (1608 Metric) - same |
| Resistance | 83.5 kΩ | 57.6 kΩ | 100 kΩ | 82.5 kΩ | 83.5 kΩ | 83.5 kΩ | 83.5 kΩ | 83.5 kΩ |
| Tolerance | ±0.1% | ±0.1% | ±0.1% | ±0.1% | ±0.1% | ±0.1% | ±0.1% | ±0.1% |
| TCR | 25 ppm/°C | 25 ppm/°C | 25 ppm/°C | 25 ppm/°C | 25 ppm/°C | 25 ppm/°C | 10 ppm/°C | 25 ppm/°C |
| Power Rating | 0.21 W | 0.21 W | 0.21 W | 0.21 W | 0.1 W | 0.1 W | 0.1 W | 0.2 W |
| Working Voltage | 75 V | 75 V | 75 V | 75 V | 75 V | 75 V | 75 V | 75 V |
| AEC-Q200 | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Bảo phân biệt quan trọng
- Anti-sulfur automotive-grade thin film (vsRT0603BRD0783K5L (Yageo))
- Higher power rating for the same 0603 footprint (vsERA-3AEB8351V (Panasonic))
- Tighter TCR option available in same footprint (vsRG1608N-8351-W-T1 (Susumu))
Ghi chú thiết kế
The TNPW060383K5BEEA is rated 0.21 W at 70°C ambient per Vishay's TNPW e3 datasheet, but must be derated linearly to 0 W at 155°C. Estimated: at 0.21 W dissipation in a still-air 70°C environment, junction temperature rise is approximately 60–80°C above ambient, depending on PCB copper-pour area. Maintain at least 50 mm² of 1 oz copper pad per Vishay's recommended land pattern to keep self-heating drift within the 25 ppm/°C TCR envelope. For continuous high-precision divider applications, derate to 0.1 W (50% of max) to minimize thermal EMF and resistance drift.
Use Vishay's recommended 0603 land pattern with solder-pad dimensions of 0.8 mm × 0.9 mm and pad-to-pad pitch of 1.5 mm. A reflow profile with peak temperature of 260°C (Pb-free) per JEDEC J-STD-020 is compatible with the TNPW e3 series. For precision divider networks, place the TNPW060383K5BEEA symmetrically with its pair resistor to minimize thermal-gradient-induced resistance mismatch; avoid routing high-current traces directly under or beside precision resistors to reduce thermal coupling.
Do not use the TNPW060383K5BEEA's 0.1% tolerance guarantee above 0.1 W dissipation without thermal verification — the 25 ppm/°C TCR applies only when self-heating is controlled. Anti-sulfur construction protects against H2S-rich environments but is not a substitute for conformal coating in salt-fog or condensing humidity conditions. Per the JEDEC JESD97 paragraph 3.5 reference cited by TTI, the termination contains less than 0.1% Pb by weight — the part is Pb-free and RoHS-compliant, but the historical 'Contains Pb' note refers to trace levels well below RoHS exemption thresholds. Verify this distinction when sourcing for Pb-free-only assemblies.
Thông tin tuân thủ
AEC-Q200 qualified (not AEC-Q100, as AEC-Q100 is for ICs, AEC-Q200 for passive components). Lead-free per JEDEC JESD97 paragraph 3.5 with termination Pb content below 0.1% by weight. Anti-sulfur construction per Vishay datasheet. Halogen-free status not explicitly stated in verified data — set to unknown.
