STMicroelectronics

TS944IDT - Quad Micropower R-R Op Amp | STMicroelectronics

部品番号: TS944IDT ✓ 生産中
2.5 V to 10 V Vdss 1.2 µA Id 14-pin SO Package
MOQ: 1 |

TS944IDT 概要

The STMicroelectronics TS944IDT is a quad micropower operational amplifier with CMOS inputs and rail-to-rail output swing, designed for four-channel signal conditioning from 2.5 V to 10 V in a 14-pin SOIC package. Its headline characteristics are a 1.2 µA supply current, 10 kHz gain-bandwidth product, and an operating temperature range from -40°C to +85°C. The four amplifiers share one package while operating from a common supply, making the TS944IDT suitable for compact, low-power instrumentation and sensor-processing systems.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two input terminals. The TS94x family belongs to the operational-amplifier hierarchy, which includes instrumentation amplifiers, buffer amplifiers, and general-purpose amplifiers. Rail-to-rail output capability allows the output voltage to approach the supply rails more closely than a conventional amplifier, improving output range in low-voltage systems where signal headroom is limited.

The TS944IDT combines four rail-to-rail-output amplifiers, CMOS inputs, micropower consumption, and a 2.5 V to 10 V supply range. Its 10 kHz gain-bandwidth product favors low-frequency amplification rather than high-speed signal processing. The 1.2 µA operating current is particularly useful for battery-operated equipment, portable sensors, and low-duty-cycle monitoring systems where each milliamp of supply current can shorten operating time.

According to the STMicroelectronics TS94x datasheet, the TS944IDT provides four amplifier circuits in a 14-pin small-outline package. CMOS input transistors support low-bias operation, while the rail-to-rail output stage increases usable output swing. The combination of four independent channels and low power consumption allows a compact design to replace several discrete single amplifiers while reducing board area and the number of required supply connections.

Typical applications include low-frequency sensor conditioning, battery-powered instrumentation, portable measurement systems, industrial monitoring, and low-current feedback networks. The TS944IDT is best suited to signals whose bandwidth does not require the substantially higher gain-bandwidth product of a general-purpose precision amplifier.

Designers should verify that the required closed-loop gain, output load, input common-mode range, and noise performance fit the application. Decoupling capacitors should be placed close to the supply pins, and the unused amplifier channels should be configured according to the manufacturer datasheet rather than left without a defined operating state.

This page combines the TS944IDT technical characteristics, verified sourcing information, drop-in alternatives, and application guidance to support component selection, PCB planning, and low-power analog design.

ドロップイン代替品: TS944IDT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: TS944IDT (同一形状・フットプリント) — 相違点: Package, Amplifier Type, Gain-Bandwidth Product, Number of Circuits, AEC-Q100 Qualification.

STMicroelectronics
Package: 14-pin TSSOP
Amplifier Type: Quad operational amplifier
Number of Circuits: 4 circuits
比較対象 TS944IDT →
STMicroelectronics
Package: 14-SO small-outline package
Amplifier Type: General-purpose operational amplifier
Gain-Bandwidth Product: 100 kHz
比較対象 TS944IDT →
STMicroelectronics
Package: 14-TSSOP
Amplifier Type: Standard (General Purpose) / Micropower CMOS
Number of Circuits: 4 (Quad)
比較対象 TS944IDT →
STMicroelectronics
Package: 14-pin SO package
Amplifier Type: General-purpose operational amplifier
Gain-Bandwidth Product: 12 MHz
比較対象 TS944IDT →

TS934IDT

✅ ドロップイン ⚠️ 仕様未検証
STMicroelectronics
📦 SOIC-14
4 circuits · General-purpose operational amplifier · Rail-to-rail · 2.7 V to 10 V · 100 kHz · 5 mA · 20 uA · 1 pA

価格はお問い合わせください

データシートを見る →

TS974IDT

✅ ドロップイン ⚠️ 仕様未検証
STMicroelectronics
📦 SOIC-14
General-purpose operational amplifier · 4 circuits · Yes · 12 MHz · 4 V/us · 4 nV/Hz · 0.003% · ±1.35 V

価格はお問い合わせください

データシートを見る →

TS924IPT

✅ ドロップイン ⚠️ 仕様未検証
STMicroelectronics
📦 SOIC-14
Quad operational amplifier · 4 circuits · Rail-to-rail input · Rail-to-rail output · BiCMOS · 3 V to 5 V · 14-pin TSSOP · Surface mount

価格はお問い合わせください

データシートを見る →

TS944IDT 最大定格&電気的特性

Amplifier Count 4 circuits
Device Type Quad operational amplifier
Supply Voltage Range 2.5 V to 10 V
動作温度範囲 -40°C to +85°C
静止電流 1.2 µA
Gain-Bandwidth Product 10 kHz
Output Swing Rail-to-rail
Input Transistor Type CMOS
パッケージ 14-pin SO
実装タイプ Surface mount
Output Offset Voltage 4.5 mV maximum
電源電流 1.2 µA per amplifier
RoHS ステータス unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

TS944IDT 14-pin so ピン配置ガイド

TS944IDT (14-pin so パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

TS944IDT の 14-pin so パッケージピン配置図

詳細なピン配置データはありません: TS944IDT.

詳細は データシート をご参照ください。

主な用途

TS944IDT の用途: 6 件s: Battery-Powered Sensor Conditioning, Portable Industrial Instrumentation, Low-Power Data Acquisition, Portable Medical Monitoring, IoT Environmental Sensor Hub, Low-Power Feedback and Control Loops.

🔋

Battery-Powered Sensor Conditioning

The TS944IDT is well suited to battery-powered sensor conditioning because it combines four amplifier channels with a 1.2 µA supply current and a 2.5 V minimum supply voltage. Each rail-to-rail-output amplifier can condition a low-frequency sensor signal while the compact 14-pin SO package reduces board area. The approximately 10 kHz gain-bandwidth product supports slow sensor signals, such as temperature, pressure, or electrochemical measurements, but it is not intended for high-speed waveforms. The design should include input protection appropriate to the sensor and verify the amplifier’s common-mode range over the complete measurement range.

🏭

Portable Industrial Instrumentation

Portable industrial instrumentation can use the TS944IDT to amplify several low-frequency channels without adding four separate amplifier packages. Its 2.5 V to 10 V operating range supports compact electronic systems, while the -40°C to +85°C specification covers a broad range of industrial ambient conditions. The four rail-to-rail-output channels are useful for transducer signals where more usable output range is needed at low supply voltage. Engineers should confirm input common-mode limits, offset accuracy, noise, and output drive against the instrumentation specification. Protection, calibration, and isolation requirements should be addressed separately from the amplifier selection.

📟

Low-Power Data Acquisition

The TS944IDT can serve as the front-end amplifier in a compact, low-power data-acquisition system that samples slow analog inputs. Four independent channels reduce the component count compared with separate single amplifiers, while 1.2 µA supply current supports longer operating time from limited energy sources. Its 10 kHz gain-bandwidth product is adequate for temperature, level, and position measurements but limits fast transient fidelity. The system designer should account for input settling, channel-to-channel behavior, sensor-grounding strategy, and the available voltage headroom. An external low-power ADC can then acquire the conditioned outputs.

💊

Portable Medical Monitoring

The TS944IDT may be used in low-frequency medical monitoring modules when four low-power analog channels are required within a compact package. Its micropower operation can reduce the load on a small battery, while rail-to-rail output swing improves signal utilization at low supply voltages. The 10 kHz bandwidth suits slowly varying physiological or biochemical signals rather than high-bandwidth diagnostic waveforms. Medical designs must independently validate leakage, isolation, noise, accuracy, and applicable regulatory requirements; the amplifier’s general-purpose status does not imply medical certification. Input protection and patient-safety isolation should be implemented outside the device.

🧩

IoT Environmental Sensor Hub

An IoT environmental sensor hub can use the TS944IDT to condition several low-bandwidth sensor channels while maintaining low standby consumption. The device supports 2.5 V to 10 V operation, which accommodates common low-energy system rails, and its four channels help limit hub size. Rail-to-rail output swing is useful when measurements must occupy much of a low-voltage signal range. The 1.2 µA operating current is attractive for duty-cycled devices, though the complete circuit will consume more power when sensors and communications are active. Firmware and analog design should avoid relying on this amplifier for high-frequency radio or switching signals.

🔧

Low-Power Feedback and Control Loops

The TS944IDT can implement gain, filtering, and feedback functions in low-power control systems where the loop bandwidth remains well below the amplifier’s 10 kHz gain-bandwidth product. Four channels allow separate error, reference, actuator, or monitoring paths within one package. The rail-to-rail output helps maximize control range from a 2.5 V to 10 V supply, while the low 1.2 µA supply current supports compact battery-powered loops. Stable operation depends on suitable phase margin, source-and-load impedances, and output-capacitance selection, none of which should be assumed from the headline bandwidth alone. Verify stability with the complete feedback network.

What is the TS944IDT?
The TS944IDT is a quad micropower operational amplifier with CMOS inputs and rail-to-rail output swing. According to the STMicroelectronics TS94x datasheet, the device contains four amplifier circuits, operates from 2.5 V to 10 V, and is intended for low-voltage, low-frequency signal-conditioning applications. It is packaged in a 14-pin SO surface-mount package.
What are the key specifications of TS944IDT that engineers should know?
The TS944IDT provides four rail-to-rail-output operational amplifiers in a 14-pin SO package. According to the STMicroelectronics TS94x datasheet, its principal specifications are a 2.5 V to 10 V supply range, 1.2 µA supply current, 10 kHz gain-bandwidth product, and operation from -40°C to +85°C. The 10 kHz bandwidth supports low-frequency sensor and instrumentation signals rather than wideband waveform processing.
What is the operating voltage of TS944IDT?
The TS944IDT operates from 2.5 V to 10 V. According to the STMicroelectronics TS94x datasheet, this supply range suits low-voltage battery-powered systems, portable instrumentation, and industrial measurement circuits. Designers should maintain the supply within the stated operating limits and confirm that the output can reach the required voltage under the selected load.
Where can I download the TS944IDT datasheet PDF?
The TS944IDT datasheet is available through the STMicroelectronics document listings linked from the component data pages, with a downloadable copy also listed by the Alldatasheet service. The manufacturer document describes the TS94x series, its 2.5 V to 10 V supply range, four-amplifier configuration, CMOS inputs, and rail-to-rail output. Use the pin-description table and electrical-characteristics tables before assigning PCB functions.
Where can I find the TS944IDT pinout?
The TS944IDT pin assignment is shown in the package information and pin-description sections of the STMicroelectronics TS94x datasheet. The device uses a 14-pin SO package with four amplifier channels and common power connections. Use the manufacturer pin table for each input, output, supply, and ground connection rather than inferring the arrangement from a generic quad-amplifier drawing.
Is TS944IDT suitable for battery-powered sensor applications?
Yes, the TS944IDT is suitable for battery-powered sensor applications that use low-frequency signals. According to the STMicroelectronics TS94x datasheet, its 1.2 µA supply current and 2.5 V minimum operating voltage reduce power demand, while four rail-to-rail-output amplifiers can process multiple sensor channels in one package. The 10 kHz gain-bandwidth product limits suitability for faster signals.
What is the rail-to-rail output advantage of TS944IDT?
The TS944IDT output can swing closer to the positive and negative supply rails than a conventional non-rail-to-rail amplifier. According to the STMicroelectronics TS94x datasheet, this output capability increases usable signal range in low-voltage systems. The exact output range still depends on load current, output configuration, and the supply voltage, so those limits should be checked for the intended circuit.
TS944IDT vs TS934IDT - which is better for low-frequency sensing?
The TS944IDT is the better choice when ultra-low power and a 10 kHz gain-bandwidth product are the primary requirements; the TS934IDT belongs to a different STMicroelectronics TS9x family and offers different electrical ratings. Because the corresponding operating current, bandwidth, and offset specifications are not stated for TS934IDT in the technical material for this page, compare both manufacturer datasheets against the exact gain, load, accuracy, and power requirements before replacement.
What is the difference between TS944IDT and TS944ID?
TS944IDT and TS944ID identify the same STMicroelectronics TS944 device family, while the suffix distinguishes the ordering and packaging configuration. TS944IDT is the 14-pin SO tape-and-reel ordering code shown in the distributor listing; TS944ID appears in a comparison listing without the trailing tape-and-reel character. Confirm the required package, temperature grade, and delivery format against the manufacturer ordering information.
What can replace the TS944IDT?
The closest documented options are same-family STMicroelectronics quad amplifiers such as TS934IDT and TS974IDT, but they are not automatically equivalent because their bandwidth, supply current, offset, and output characteristics can differ. A valid replacement must also preserve the 14-pin SO footprint and required pin function. Request a manufacturer-supported cross-reference and compare the electrical tables before treating any candidate as a drop-in replacement.
Is TS944IDT the same as TS974IDT?
No. TS944IDT and TS974IDT are different STMicroelectronics amplifier families, even though both may use a 14-pin SO package. The TS944IDT is characterized for 2.5 V to 10 V operation, 1.2 µA supply current, and a 10 kHz gain-bandwidth product. TS974IDT has different performance ratings, so it is only a drop-in choice when its complete electrical specification meets the target circuit requirements.
When should I choose TS944IDT instead of a higher-bandwidth quad op amp?
Choose the TS944IDT when battery life dominates and the required signals remain within its approximately 10 kHz gain-bandwidth capability. According to the STMicroelectronics TS94x datasheet, the device combines micropower operation with four rail-to-rail-output channels. Select a higher-bandwidth amplifier instead when slew rate, settling behavior, small-signal bandwidth, or drive capability is critical to the application.
Is TS944IDT suitable for portable industrial monitoring?
The TS944IDT is suitable for portable industrial monitoring when the measured signals are low-frequency and the system operates from a 2.5 V to 10 V source. Its four channels can condition multiple sensor outputs, while the -40°C to +85°C range supports many industrial environments. Confirm electromagnetic robustness, input protection, calibration requirements, and enclosure-level thermal performance as part of the complete design.
How should TS944IDT power-supply decoupling be designed?
Place the required supply-decoupling capacitors directly beside the TS944IDT power and ground pins, following the STMicroelectronics datasheet layout guidance. Keep the connection traces short to limit supply impedance and reduce susceptibility to switching noise. A common ground reference near the device also helps preserve amplifier performance. Validate the final component values against the application’s impedance, noise, and transient requirements.
Where can I buy TS944IDT online and what is its price?
Use the Request a Quote form on this page to request TS944IDT pricing, stock confirmation, minimum order quantity, and current lead time. The commercial answer is handled through the quote form because market pricing and inventory change frequently. For technical confirmation, use the manufacturer datasheet and package drawing to ensure the ordered TS944IDT configuration matches the PCB.
What is the lead time for TS944IDT?
Request the current TS944IDT lead time through the Request a Quote form on this page. Lead time can vary with order quantity, package configuration, and current manufacturing availability, so engineers should not rely on a historical estimate for production planning. Include the target quantity, delivery location, and required date in the quote request to obtain an actionable schedule.
Is TS944IDT in stock?
Current TS944IDT stock should be confirmed through the Request a Quote form on this page because inventory can change after this product page is rendered. The component is listed for order by major suppliers, which indicates current market availability, but it does not guarantee a particular quantity at a particular time. Submit the required quantity and package details for an availability response.

エンジニアリング参考データ: TS944IDT — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the TS944IDT for low-frequency, low-power analog systems that need four channels, especially when operating from a 2.5 V to 10 V supply. Its 1.2 µA supply current, rail-to-rail output, and 10 kHz gain-bandwidth product form a clear advantage in portable sensing, low-power data acquisition, and compact monitoring circuits. Consider the TS934IDT when its manufacturer ratings better match the required bandwidth, offset, and current profile. Consider the TS974IDT when greater speed is valuable and the resulting power demand remains acceptable. The TS924IPT is another same-footprint option, but it should be selected only after its electrical characteristics are checked against the target. None of these candidates should replace the TS944IDT solely because the packages match; input range, offset, noise, stability, output drive, and exact pin functions must also satisfy the design.

代替品との比較

パラメータ この製品 TS934IDT TS974IDT TS924IPT
Package SOIC-14 SOIC-14 SOIC-14 SOIC-14
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics

主な差別化要因

  • Combines four micropower amplifier channels in one package (vs TS934IDT)
  • Designed for an exceptionally low 2.5 V minimum supply (vs TS974IDT)
  • Rail-to-rail output improves low-voltage signal range (vs TS924IPT)

設計ノート

Place the supply-decoupling capacitors directly beside the TS944IDT power and ground pins, and keep those traces short. Use the STMicroelectronics datasheet layout recommendations to determine the required capacitance and connection geometry. A compact ground path beneath and around the device helps reduce supply impedance and coupling between adjacent analog channels. Confirm that the exposed package and copper treatment match the selected 14-pin SO assembly.

Do not treat the 10 kHz gain-bandwidth product as suitable for high-speed signal conditioning. For slow sensor signals, check the closed-loop gain against the frequency range of interest, and calculate the resulting bandwidth rather than relying on the gain-bandwidth value alone. Also verify the input common-mode range, output swing under load, and maximum output current before finalizing the gain and bias network.

Because the TS944IDT contains four amplifiers in one package, sensitive inputs and outputs should be routed to avoid parallel long traces that can couple noise between channels. Ground each input reference close to its source, keep high-impedance feedback networks compact, and separate analog signal routes from switching or digital clock paths. When one channel is unused, configure it according to the manufacturer datasheet rather than allowing an undefined input condition.

The headline 1.2 µA supply current applies to the amplifier operating condition described by STMicroelectronics; complete battery-life calculations must include sensor current, pull resistors, leakage, and external circuitry. For duty-cycled systems, ensure the TS944IDT supply can be switched without creating input overvoltage on non-powered channels. Review the power-up sequence and input tolerances before using the device with partially powered sensors.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No specific RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive-qualification statement appears in the cited product information. The general-purpose operational-amplifier category is not treated as AEC-Q100 qualification.

関連検索

TS944IDT TS944IDT datasheet TS944IDT datasheet pdf TS944IDT pinout STMicroelectronics TS944IDT TS944IDT 2.5V 10V op amp TS944IDT 1.2uA amplifier TS944IDT 14 pin SOIC TS944IDT rail to rail output TS944IDT equivalent TS944IDT drop-in replacement TS944IDT vs TS934IDT TS944IDT price TS944IDT stock

関連部品&用語

STMicroelectronics TS944IDT TS934IDT TS974IDT TS924IPT quad operational amplifier operational amplifier signal-conditioning amplifier analog integrated circuit micropower amplifier rail-to-rail output CMOS input gain-bandwidth product 1.2 µA supply current 10 kHz bandwidth 2.5 V minimum supply voltage 14-pin SOIC surface-mount package battery-powered sensing portable instrumentation low-power data acquisition industrial monitoring
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示