Microchip Technology

VSC8541XMV-03 - Gigabit Ethernet Copper PHY | Microchip

部品番号: VSC8541XMV-03 ✓ 生産中
10/100/1000BASE-T Rds(on) 68-pin QFN Package
MOQ: 1 |

VSC8541XMV-03 概要

Microchip Technology VSC8541XMV-03 is a single-port Gigabit Ethernet copper PHY with EEE, Wake-on-LAN, and Synchronous Ethernet support. It supports 10/100/1000BASE-T operation and is packaged in a 68-pin, 8 mm x 8 mm QFN package. The device is intended for space-constrained Ethernet equipment requiring a compact interface between a network transformer or magnetics and the host digital electronics.

An Ethernet copper PHY is an interface integrated circuit that translates digital Ethernet symbols into physical signaling for twisted-pair cables. Within the network interface hierarchy, the PHY connects the MAC and media-access-control logic to a 10/100/1000BASE-T physical layer. The VSC8541 family supports reduced-power operation and energy-efficient Ethernet, helping embedded and communications equipment lower power consumption when traffic demand is low.

The VSC8541 combines a 1 Gb/s copper-channel capability with RGMII, RMII, and MII-style host interfaces identified by the manufacturer documentation. Synchronous Ethernet support is valuable in telecom and industrial systems where the physical clock must remain aligned with a common timing reference. Wake-on-LAN enables a system to react to designated network activity while most other functions are placed into a low-power state.

The device uses an 8 mm x 8 mm QFN package, providing a comparatively compact solution for single-port designs. Its single-port architecture avoids the component count of a multi-port PHY solution. The exact pin assignments, clocking requirements, transceiver limits, operating-temperature grade, and recommended magnetics must be confirmed in the VSC8541 manufacturer datasheet before schematic release. The hardware design checklist also emphasizes first-pass design considerations for this device family.

Typical installations include industrial Ethernet switches, telecom access equipment, embedded network controllers, serial-server platforms, and compact gateways. In each case, the PHY reduces the amount of physical-layer circuitry required at the board edge. The 68-pin QFN package also requires a land pattern capable of routing high-speed digital interfaces and supplying clean power to the copper transceiver.

For a new layout, place the PHY close to the Ethernet connector and magnetics, and keep the digital host-interface section away from the copper-channel circuitry. Follow the manufacturer’s high-speed trace, via, decoupling, and return-path guidance. Validate magnetics selection, center-tap termination, isolation requirements, and cable reach before releasing production hardware.

This page combines the manufacturer’s product positioning with package details, application guidance, drop-in ordering alternatives, and hardware design considerations. It is intended to help engineers identify the correct VSC8541 ordering code and plan a robust copper-Ethernet implementation without treating unreleased parameter data as a substitute for the datasheet.

ドロップイン代替品: VSC8541XMV-03 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: VSC8541XMV-03 (同一形状・フットプリント) — 相違点: Energy Efficient Ethernet, Synchronous Ethernet, Product Type, Package Dimensions, Package Type.

Microchip Technology
Energy Efficient Ethernet: IEEE 802.3az supported
Synchronous Ethernet: SyncE supported
Product Type: Single-port copper Ethernet PHY
比較対象 VSC8541XMV-03 →
Microchip Technology
Energy Efficient Ethernet: Supported
Package Dimensions: 8 x 8 mm
Package Type: QFN-68
比較対象 VSC8541XMV-03 →
Microchip Technology
Energy Efficient Ethernet: EEE supported
Synchronous Ethernet: SyncE supported
比較対象 VSC8541XMV-03 →
Microchip Technology
Energy Efficient Ethernet: Supported
比較対象 VSC8541XMV-03 →

VSC8541XMV-01

✅ ドロップイン
Microchip Technology
📦 68-QFN (8x8 mm)
Single-port Gigabit Ethernet copper PHY · 10/100/1000BASE-T · 1 port · GMII/RGMII/MII/RMII · EEE supported · Supported · SyncE supported · Integrated

価格はお問い合わせください

データシートを見る →

VSC8541XMV-02

✅ ドロップイン
📦 68-QFN (8x8 mm)
Same VSC8541 family and 68-QFN footprint; ordering suffix differs by one option step from -03, with device-option conditions requiring confirmation.

📋 参考代替品(カタログ未掲載)

VSC8541XMV-05

✅ ドロップイン
📦 68-VQFN (8x8 mm)
Same VSC8541 family and 68-pin footprint; ordering suffix differs by two option steps from -03, with the -05 listing identifying industrial-temperature positioning.

📋 参考代替品(カタログ未掲載)

VSC8541XMV-04

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 68-QFN (8x8 mm)
Single-port copper Ethernet PHY · 10/100/1000BASE-T · 1 copper port · GMII, RGMII, MII, and RMII · Supported · Supported · Supported · 68-QFN (8 mm x 8 mm)

価格はお問い合わせください

データシートを見る →

VSC8541XMV-06

✅ ドロップイン ⚠️ 仕様未検証
📦 68-QFN (8x8 mm)
Same VSC8541 family and 68-QFN footprint; ordering suffix differs by three option steps from -03, with lifecycle, qualification, and temperature conditions requiring confirmation.

📋 参考代替品(カタログ未掲載)

VSC8541XMV-03 仕様

Product Type Single-port Gigabit Ethernet copper PHY
Ethernet Standards Supported 10/100/1000BASE-T
Number of Ports 1 port
Physical Medium Copper twisted-pair Ethernet
Maximum Nominal Data Rate 1 Gb/s
Energy-Efficient Ethernet Supported
Wake-on-LAN Supported
Synchronous Ethernet Supported
Host Interface RGMII, RMII, and MII
Package Type 68-pin QFN
Package Dimensions 8 mm x 8 mm
実装タイプ Surface mount
Power Classification Low-power PHY

VSC8541XMV-03 8 mm x 8 mm ピン配置ガイド

VSC8541XMV-03 (8 mm x 8 mm パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

VSC8541XMV-03 の 8 mm x 8 mm パッケージピン配置図

詳細なピン配置データはありません: VSC8541XMV-03.

詳細は データシート をご参照ください。

主な用途

VSC8541XMV-03 の用途: 6 件s: Industrial Ethernet Switch Ports, Telecom Access Equipment, Embedded Network Gateways, Network Appliance Management Ports, Serial-to-Ethernet Gateways, Low-Power Network Endpoints.

🏭

Industrial Ethernet Switch Ports

The VSC8541XMV-03 fits a single-port copper-Ethernet section of an industrial switch because it supports 10/100/1000BASE-T operation, EEE, and a compact 68-pin QFN package. Place the PHY near the connector and Ethernet magnetics to minimize the high-speed copper-channel path while routing RGMII, RMII, or MII toward the switching controller. EEE can reduce power during low-traffic periods, but the system must implement the required link-state and shutdown behavior. Verify industrial temperature limits, isolation needs, magnetics selection, and the manufacturer’s layout checklist before production release.

🌐

Telecom Access Equipment

The VSC8541XMV-03 is appropriate for telecom access equipment requiring Gigabit Ethernet service interfaces and precise timing. Synchronous Ethernet support can align the PHY interface with a system timing reference, while the single-port architecture keeps the board area of each copper service port small. Use the manufacturer’s clock and timing requirements to select the host interface and reference-clock arrangement. High-speed digital routes should remain separated from the copper channel and magnetics, while bypass and bulk decoupling must follow the recommended layout.

🧩

Embedded Network Gateways

The VSC8541XMV-03 supports compact gateways that need one wired Gigabit Ethernet uplink alongside a processor or communications controller. Its low-power design, EEE support, and selectable RGMII, RMII, or MII interfaces provide flexibility across embedded platforms with different host-clock and I/O requirements. The 8 mm x 8 mm QFN saves board area, but a dense layout still demands careful return-path continuity, magnetics placement, and supply decoupling. Confirm the controller’s electrical interface and the operating-temperature requirements of the finished gateway.

🖥️

Network Appliance Management Ports

The VSC8541XMV-03 can implement a dedicated management or service port on a network appliance when designers want 1 Gb/s copper connectivity with low-power behavior. Its single-port format avoids allocating a multi-port PHY to one connection, while EEE and Wake-on-LAN support can suit systems that idle between administrative tasks. The host controller must match the selected RGMII, RMII, or MII timing and voltage requirements. Position the connector, magnetics, and PHY as a compact high-speed group, and keep unrelated switching nodes and switching-power layouts out of that region.

⚡

Serial-to-Ethernet Gateways

The VSC8541XMV-03 is useful in serial-to-Ethernet gateways that convert legacy serial data to a copper network uplink. The 10/100/1000BASE-T support provides migration flexibility across network speeds, while the compact QFN package suits dense industrial enclosures. A host processor or dedicated network controller can connect through the selected digital interface, and the Ethernet magnics provide isolation and impedance matching to the cable. Validate transceiver timing, magnetics compatibility, surge protection placement, and enclosure temperature before releasing the design.

💡

Low-Power Network Endpoints

The VSC8541XMV-03 fits low-power network endpoints that maintain a wired Ethernet connection while periodically entering reduced-activity states. Wake-on-LAN allows the endpoint to respond to designated network activity, and EEE supports lower-energy link operation when traffic is light. These features must be coordinated with the host controller and system power policy to avoid missed wake events or link negotiation problems. Keep the PHY’s local supplies clean, follow the recommended bypass-capacitor arrangement, and validate the complete sleep, wake, and cable-link behavior in system tests.

What is the VSC8541XMV-03?
The VSC8541XMV-03 is a single-port 10/100/1000BASE-T Ethernet copper PHY from Microchip Technology. According to the Microchip VSC8541 product page, it combines a compact 68-pin, 8 mm x 8 mm QFN package with Energy-Efficient Ethernet, Wake-on-LAN, and Synchronous Ethernet support. The device provides the physical-layer interface between twisted-pair Ethernet media and a digital network controller.
What Ethernet speeds does VSC8541XMV-03 support?
The VSC8541XMV-03 supports 10 Mb/s, 100 Mb/s, and 1000 Mb/s operation over copper cable. The manufacturer describes the VSC8541 family as suitable for 10/100/1000BASE-T applications, with a maximum nominal Ethernet data rate of 1 Gb/s. Exact autonegotiation, cable-length, and bit-error-rate limits should be confirmed in the manufacturer datasheet.
Which digital interfaces are available on VSC8541XMV-03?
The VSC8541XMV-03 supports RGMII, RMII, and MII host-interface configurations. These interfaces let the PHY connect to digital Ethernet controllers with different clocking and data-width requirements. The correct mode, reference-clock arrangement, and I/O voltage must be selected from the manufacturer datasheet and confirmed against the host controller requirements.
Where can I download the VSC8541XMV-03 datasheet PDF?
The official VSC8541 product page provides the manufacturer’s technical documentation and datasheet access for the VSC8541 family. Use the Microchip product page at the datasheet link on this page, then identify the revision covering ordering code VSC8541XMV-03. Also consult the VSC8541 Hardware Design Checklist before finalizing the board layout.
Where can I find the VSC8541XMV-03 pinout?
The VSC8541XMV-03 pin assignments are found in the pin-description and land-pattern sections of the manufacturer datasheet. The component uses a 68-pin, 8 mm x 8 mm QFN package, so the physical pinout must not be inferred from another VSC85xx device. Use the exact pin-description table to assign supplies, clocks, host interfaces, copper-channel connections, and exposed-pad connections.
Is VSC8541XMV-03 suitable for industrial Ethernet equipment?
The VSC8541XMV-03 is suitable for compact copper-Ethernet interfaces when its specified electrical and temperature limits meet the product’s environmental requirements. Its low-power design, 1 Gb/s capability, EEE, and Synchronous Ethernet support are useful in industrial and telecom equipment. Confirm the exact operating-temperature grade and industrial qualification requirements before release.
What is the best drop-in replacement for VSC8541XMV-03?
VSC8541XMV-01 is the closest listed same-family ordering alternative because it uses the same VSC8541 device family and 68-pin QFN format. VSC8541XMV-02 and VSC8541XMV-05 are additional ordering-code alternatives, but their temperature and qualification conditions must be checked before substitution. A valid drop-in decision requires identical pin functions, supplies, clocks, timing, and environmental requirements.
Can VSC8541XMV-01 replace VSC8541XMV-03?
VSC8541XMV-01 can serve as a same-footprint replacement candidate because it is a VSC8541 ordering option in the same package family. Before replacing VSC8541XMV-03, compare the ordering-code temperature grade, qualification status, clocking configuration, and any revision-specific notes. Confirm both temperature-range limits and pin-level behavior in the manufacturer documentation.
What can replace VSC8541XMV-03?
The strongest replacement candidates are the other VSC8541XMV ordering codes, including VSC8541XMV-01, VSC8541XMV-02, VSC8541XMV-05, VSC8541XMV-04, and VSC8541XMV-06. These are same-family candidates rather than independently validated cross-brand equivalents. Use the Request a Quote form on this page to identify the exact ordering codes currently available and request guidance on substitution.
Is VSC8541XMV-03 the same as VSC8541XMV-05?
VSC8541XMV-03 and VSC8541XMV-05 are members of the same VSC8541 single-port Gigabit Ethernet PHY family and share the 68-pin VQFN format. The ordering suffix can distinguish commercial conditions or device options, so they should not be treated as unconditionally identical. Verify the manufacturer’s ordering table for temperature grade and other suffix-specific differences before interchangeability.
VSC8541XMV-03 vs VSC8541XMV-01 - which is better?
VSC8541XMV-03 is preferable when it meets the required industrial-temperature and qualification conditions; VSC8541XMV-01 is preferable when its ordering-code conditions better match the system requirements. Both belong to the same VSC8541 family and use the same package format. The deciding factors are temperature grade, qualification, lifecycle needs, and device-specific ordering notes rather than basic Ethernet functionality.
When should I choose VSC8541XMV-03 over another Ethernet PHY?
Choose VSC8541XMV-03 when the design requires a compact single-port Gigabit Ethernet copper interface with EEE, Wake-on-LAN, and Synchronous Ethernet support. It is especially relevant to space-constrained industrial, telecom, gateway, and embedded systems using RGMII, RMII, or MII host interfaces. Select it only after confirming package pinout, temperature grade, clocking, magnetics, and power requirements.
Is VSC8541XMV-03 suitable for a SyncE telecom design?
The VSC8541XMV-03 supports Synchronous Ethernet according to the Microchip product page, making it applicable to designs requiring PHY clocking aligned with a network timing reference. The system must still provide the required reference clock and comply with the manufacturer’s clock-source, jitter, and interface timing requirements. Confirm those details in the VSC8541 datasheet.
How much power does the VSC8541XMV-03 consume?
The VSC8541 is identified as a low-power copper PHY, but an exact current consumption cannot be assigned without the operating mode and supply condition. Current varies with link state, EEE mode, interface speed, and the enabled host interface. Consult the manufacturer’s electrical-characteristics tables for active, idle, and low-power conditions and calculate the rail requirement from the actual operating profile.
Where can I buy VSC8541XMV-03 and check its lead time?
Use the Request a Quote form on this page to ask about VSC8541XMV-03 availability, current lead time, minimum order quantity, and package delivery options. The manufacturer and distributor listings identify the part as a 68-pin QFN single-port Gigabit Ethernet copper PHY. Commercial availability and production allocation should be confirmed at the time of quotation.
What are the key specifications of VSC8541XMV-03 that engineers should know?
The key specifications are single-port 10/100/1000BASE-T operation, a 1 Gb/s maximum nominal rate, EEE, Wake-on-LAN, Synchronous Ethernet, RGMII/RMII/MII host interfaces, and a 68-pin 8 mm x 8 mm QFN package. According to the Microchip VSC8541 product page, the device is designed for low-power, space-constrained 10/100/1000BASE-T equipment.

エンジニアリング参考データ: VSC8541XMV-03 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose VSC8541XMV-03 for a compact single-port Gigabit Ethernet copper interface that needs 10/100/1000BASE-T support, EEE, Wake-on-LAN, Synchronous Ethernet, and a choice of RGMII, RMII, or MII host interfaces. Select VSC8541XMV-01 when its ordering-code conditions better fit the design, or VSC8541XMV-05 when the product listing’s industrial-temperature positioning satisfies the environmental requirement. VSC8541XMV-02 and the other same-family suffix options are candidates only after checking temperature grade, qualification, lifecycle, and device-specific ordering notes. No independently verified cross-brand drop-in candidate is identified, so a different manufacturer’s PHY should not be treated as a direct replacement without a completed pin, clock, electrical, magnetics, and layout comparison.

代替品との比較

パラメータ この製品 VSC8541XMV-01 VSC8541XMV-02 VSC8541XMV-05 VSC8541XMV-04 VSC8541XMV-06
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 68-QFN (8x8 mm) 68-QFN (8x8 mm) - same 68-QFN (8x8 mm) - same 68-VQFN (8x8 mm) - same 68-QFN (8x8 mm) - same 68-QFN (8x8 mm) - same

主な差別化要因

  • Provides synchronization and low-power network features in one PHY (vs VSC8541XMV-05)
  • Uses a compact single-port 68-pin QFN footprint (vs VSC8541XMV-01)
  • Supports three common digital Ethernet host interfaces (vs VSC8541XMV-02)

設計ノート

Use the VSC8541 Hardware Design Checklist as the primary layout reference. Position the PHY close to the Ethernet connector and magnetics, preserve a continuous return path beneath the high-speed digital interfaces, and follow the specified via and trace geometry. Do not substitute the pinout of another VSC85xx device because related package variants can assign different interface and power functions.

Separate the RGMII, RMII, or MII host-interface region from the copper-channel and magnetics region. Match impedance according to the board stack-up and keep clock and data routing consistent with the manufacturer’s timing guidance. Review jitter, skew, via stubs, and connector or magnetics transitions during signal-integrity review, especially when operating at the 1 Gb/s copper rate.

Apply the manufacturer’s recommended supply topology and decoupling without substitution. Place bypass capacitors close to the relevant supply and ground pins, provide adequate return-path vias, and isolate digital and analog supply requirements as directed in the datasheet. Verify power consumption across link speed, EEE state, host-interface mode, and temperature because a single nominal current value may not represent the system’s maximum demand.

Do not select a VSC8541 ordering code solely from the package outline. Confirm the ordering suffix, operating-temperature grade, qualification conditions, clock requirements, and host-interface configuration. Also validate Ethernet magnetics, center-tap termination, isolation, surge protection, and cable reach; a footprint-compatible PHY can still fail system requirements if its ordering conditions or supporting network components are incorrect.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The product-page and distributor snippets do not state the exact VSC8541XMV-03 compliance status. Obtain the manufacturer declaration or material-disclosure documentation for production release.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

vsc8541xmv 05 datasheet vsc8541xmv qfn 68 vsc8541xmv 02 datasheet VSC8541XMV-03 datasheet VSC8541XMV-03 datasheet pdf VSC8541XMV-03 pinout VSC8541XMV-03 QFN 68 pinout VSC8541XMV-03 drop-in replacement VSC8541XMV-03 equivalent VSC8541XMV-03 vs VSC8541XMV-05 VSC8541XMV-03 application circuit VSC8541XMV-03 hardware design checklist VSC8541XMV-03 price VSC8541XMV-03 stock Microchip VSC8541XMV-03

関連部品&用語

Microchip Technology VSC8541XMV-03 VSC8541XMV-01 VSC8541XMV-02 VSC8541XMV-04 VSC8541XMV-05 VSC8541XMV-06 Ethernet PHY copper PHY physical layer 10/100/1000BASE-T Gigabit Ethernet RGMII RMII MII Energy-Efficient Ethernet EEE Wake-on-LAN Synchronous Ethernet SyncE QFN surface-mount package industrial Ethernet telecom access equipment Ethernet magnetics
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示