VSC8541XMV-03 - Gigabit Ethernet Copper PHY | Microchip
Référence : VSC8541XMV-03 ✓ ActifVSC8541XMV-03 Présentation
An Ethernet copper PHY is an interface integrated circuit that translates digital Ethernet symbols into physical signaling for twisted-pair cables. Within the network interface hierarchy, the PHY connects the MAC and media-access-control logic to a 10/100/1000BASE-T physical layer. The VSC8541 family supports reduced-power operation and energy-efficient Ethernet, helping embedded and communications equipment lower power consumption when traffic demand is low.
The VSC8541 combines a 1 Gb/s copper-channel capability with RGMII, RMII, and MII-style host interfaces identified by the manufacturer documentation. Synchronous Ethernet support is valuable in telecom and industrial systems where the physical clock must remain aligned with a common timing reference. Wake-on-LAN enables a system to react to designated network activity while most other functions are placed into a low-power state.
The device uses an 8 mm x 8 mm QFN package, providing a comparatively compact solution for single-port designs. Its single-port architecture avoids the component count of a multi-port PHY solution. The exact pin assignments, clocking requirements, transceiver limits, operating-temperature grade, and recommended magnetics must be confirmed in the VSC8541 manufacturer datasheet before schematic release. The hardware design checklist also emphasizes first-pass design considerations for this device family.
Typical installations include industrial Ethernet switches, telecom access equipment, embedded network controllers, serial-server platforms, and compact gateways. In each case, the PHY reduces the amount of physical-layer circuitry required at the board edge. The 68-pin QFN package also requires a land pattern capable of routing high-speed digital interfaces and supplying clean power to the copper transceiver.
For a new layout, place the PHY close to the Ethernet connector and magnetics, and keep the digital host-interface section away from the copper-channel circuitry. Follow the manufacturer’s high-speed trace, via, decoupling, and return-path guidance. Validate magnetics selection, center-tap termination, isolation requirements, and cable reach before releasing production hardware.
This page combines the manufacturer’s product positioning with package details, application guidance, drop-in ordering alternatives, and hardware design considerations. It is intended to help engineers identify the correct VSC8541 ordering code and plan a robust copper-Ethernet implementation without treating unreleased parameter data as a substitute for the datasheet.
Alternatives de remplacement direct pour VSC8541XMV-03 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec VSC8541XMV-03 (même facteur de forme et même empreinte) — différant par Energy Efficient Ethernet, Synchronous Ethernet, Product Type, Package Dimensions, Package Type.
VSC8541XMV-01
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →VSC8541XMV-02
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
VSC8541XMV-05
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
VSC8541XMV-04
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →VSC8541XMV-06
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
VSC8541XMV-03 Spécifications
| Product Type | Single-port Gigabit Ethernet copper PHY |
| Ethernet Standards Supported | 10/100/1000BASE-T |
| Number of Ports | 1 port |
| Physical Medium | Copper twisted-pair Ethernet |
| Maximum Nominal Data Rate | 1 Gb/s |
| Energy-Efficient Ethernet | Supported |
| Wake-on-LAN | Supported |
| Synchronous Ethernet | Supported |
| Host Interface | RGMII, RMII, and MII |
| Package Type | 68-pin QFN |
| Package Dimensions | 8 mm x 8 mm |
| Type de montage | Surface mount |
| Power Classification | Low-power PHY |
Guide de configuration des broches du VSC8541XMV-03 8 mm x 8 mm
Configuration des broches du VSC8541XMV-03 (boîtier 8 mm x 8 mm). La numérotation des broches, les fonctions et les schémas de connexion sont définis dans la fiche technique du fabricant. Consultez-la pour l'empreinte exacte et les directives de soudage.
Aucune donnée de brochage détaillée disponible pour VSC8541XMV-03.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
VSC8541XMV-03 convient pour 6 applications: Industrial Ethernet Switch Ports, Telecom Access Equipment, Embedded Network Gateways, Network Appliance Management Ports, Serial-to-Ethernet Gateways, Low-Power Network Endpoints.
Industrial Ethernet Switch Ports
The VSC8541XMV-03 fits a single-port copper-Ethernet section of an industrial switch because it supports 10/100/1000BASE-T operation, EEE, and a compact 68-pin QFN package. Place the PHY near the connector and Ethernet magnetics to minimize the high-speed copper-channel path while routing RGMII, RMII, or MII toward the switching controller. EEE can reduce power during low-traffic periods, but the system must implement the required link-state and shutdown behavior. Verify industrial temperature limits, isolation needs, magnetics selection, and the manufacturer’s layout checklist before production release.
Recommandé
Telecom Access Equipment
The VSC8541XMV-03 is appropriate for telecom access equipment requiring Gigabit Ethernet service interfaces and precise timing. Synchronous Ethernet support can align the PHY interface with a system timing reference, while the single-port architecture keeps the board area of each copper service port small. Use the manufacturer’s clock and timing requirements to select the host interface and reference-clock arrangement. High-speed digital routes should remain separated from the copper channel and magnetics, while bypass and bulk decoupling must follow the recommended layout.
Recommandé
Embedded Network Gateways
The VSC8541XMV-03 supports compact gateways that need one wired Gigabit Ethernet uplink alongside a processor or communications controller. Its low-power design, EEE support, and selectable RGMII, RMII, or MII interfaces provide flexibility across embedded platforms with different host-clock and I/O requirements. The 8 mm x 8 mm QFN saves board area, but a dense layout still demands careful return-path continuity, magnetics placement, and supply decoupling. Confirm the controller’s electrical interface and the operating-temperature requirements of the finished gateway.
Recommandé
Network Appliance Management Ports
The VSC8541XMV-03 can implement a dedicated management or service port on a network appliance when designers want 1 Gb/s copper connectivity with low-power behavior. Its single-port format avoids allocating a multi-port PHY to one connection, while EEE and Wake-on-LAN support can suit systems that idle between administrative tasks. The host controller must match the selected RGMII, RMII, or MII timing and voltage requirements. Position the connector, magnetics, and PHY as a compact high-speed group, and keep unrelated switching nodes and switching-power layouts out of that region.
Recommandé
Serial-to-Ethernet Gateways
The VSC8541XMV-03 is useful in serial-to-Ethernet gateways that convert legacy serial data to a copper network uplink. The 10/100/1000BASE-T support provides migration flexibility across network speeds, while the compact QFN package suits dense industrial enclosures. A host processor or dedicated network controller can connect through the selected digital interface, and the Ethernet magnics provide isolation and impedance matching to the cable. Validate transceiver timing, magnetics compatibility, surge protection placement, and enclosure temperature before releasing the design.
Recommandé
Low-Power Network Endpoints
The VSC8541XMV-03 fits low-power network endpoints that maintain a wired Ethernet connection while periodically entering reduced-activity states. Wake-on-LAN allows the endpoint to respond to designated network activity, and EEE supports lower-energy link operation when traffic is light. These features must be coordinated with the host controller and system power policy to avoid missed wake events or link negotiation problems. Keep the PHY’s local supplies clean, follow the recommended bypass-capacitor arrangement, and validate the complete sleep, wake, and cable-link behavior in system tests.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour VSC8541XMV-03 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | VSC8541XMV-01 | VSC8541XMV-02 | VSC8541XMV-05 | VSC8541XMV-04 | VSC8541XMV-06 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 68-QFN (8x8 mm) | 68-QFN (8x8 mm) - same | 68-QFN (8x8 mm) - same | 68-VQFN (8x8 mm) - same | 68-QFN (8x8 mm) - same | 68-QFN (8x8 mm) - same |
Principaux différenciateurs
- Provides synchronization and low-power network features in one PHY (vs VSC8541XMV-05)
- Uses a compact single-port 68-pin QFN footprint (vs VSC8541XMV-01)
- Supports three common digital Ethernet host interfaces (vs VSC8541XMV-02)
Notes de conception
Use the VSC8541 Hardware Design Checklist as the primary layout reference. Position the PHY close to the Ethernet connector and magnetics, preserve a continuous return path beneath the high-speed digital interfaces, and follow the specified via and trace geometry. Do not substitute the pinout of another VSC85xx device because related package variants can assign different interface and power functions.
Separate the RGMII, RMII, or MII host-interface region from the copper-channel and magnetics region. Match impedance according to the board stack-up and keep clock and data routing consistent with the manufacturer’s timing guidance. Review jitter, skew, via stubs, and connector or magnetics transitions during signal-integrity review, especially when operating at the 1 Gb/s copper rate.
Apply the manufacturer’s recommended supply topology and decoupling without substitution. Place bypass capacitors close to the relevant supply and ground pins, provide adequate return-path vias, and isolate digital and analog supply requirements as directed in the datasheet. Verify power consumption across link speed, EEE state, host-interface mode, and temperature because a single nominal current value may not represent the system’s maximum demand.
Do not select a VSC8541 ordering code solely from the package outline. Confirm the ordering suffix, operating-temperature grade, qualification conditions, clock requirements, and host-interface configuration. Also validate Ethernet magnetics, center-tap termination, isolation, surge protection, and cable reach; a footprint-compatible PHY can still fail system requirements if its ordering conditions or supporting network components are incorrect.
Informations de conformité
The product-page and distributor snippets do not state the exact VSC8541XMV-03 compliance status. Obtain the manufacturer declaration or material-disclosure documentation for production release.