WM8903CLGEFK - 24-Bit Stereo Audio Codec | Cirrus Logic
部品番号: WM8903CLGEFK ✓ 生産中WM8903CLGEFK 概要
An audio codec is a mixed-signal semiconductor that converts between digital audio data and analog microphone, line, or headphone signals. Within the signal-chain hierarchy, a codec sits between an audio source, such as a microphone or line input, and a digital audio bus such as I2S or I2C. The WM8903 therefore belongs to the broader audio interface IC and low-power mixed-signal semiconductor category.
The device provides 24-bit stereo conversion through two ADC and two DAC channels. This 24-bit format allows capture and playback systems to retain substantially more signal detail than conventional 16-bit consumer audio interfaces. Its ultra-low-power design focus makes it appropriate for portable equipment where battery life, heat, and board area constrain the audio subsystem.
The WM8903CLGEFK combines stereo analog conversion, digital audio control, and integrated audio processing in a 40-QFN package. Its 5 x 5 mm footprint supports compact layouts, while the exposed-pad package enables direct thermal coupling to the PCB when the device dissipation requires it. The package's exposed pad must be connected according to the manufacturer layout guidance rather than treated as an unused pin.
Typical uses include portable media players, smart phones, tablets, connected personal audio products, and other battery-powered systems that require microphone capture and low-noise stereo playback. The same device can also serve compact embedded audio platforms where one codec must support analog recording, headphone output, digital bus communication, and programmable audio routing.
PCB design should prioritize short, symmetric analog paths between external audio connectors, microphone circuitry, and the codec. Input and output bypass capacitors should be placed close to their associated pins, while digital clock, data, and control traces should remain isolated from sensitive analog nodes. Confirm pin orientation, exposed-pad connections, supply sequencing, and supported digital audio formats against the manufacturer datasheet before release.
This page combines the device's confirmed stereo codec, 24-bit conversion, 40-QFN packaging, and low-power positioning with practical guidance for layout, sourcing, and qualification. It also distinguishes the confirmed WM8903CLGEFK/R listing from true drop-in alternatives, preventing packaging-code changes from being presented as different engineering solutions.
ドロップイン代替品: WM8903CLGEFK — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
WM8903CLGEFK/R
✅ ドロップイン📋 参考代替品(カタログ未掲載)
WM8903CLGEFK 最大定格&電気的特性
| Product Type | Stereo audio codec |
| ADC Resolution | 24 bit |
| ADC Channels | 2 channels |
| DAC Resolution | 24 bit |
| DAC Channels | 2 channels |
| パッケージ | 40-QFN (5 x 5 mm) |
| Total Pins | 40 pins |
| Exposed Pad | Yes |
| 実装タイプ | Surface mount |
| Power Class | Ultra-low-power |
| Audio Class | High-fidelity stereo audio |
| Target Application | Portable audio applications |
| 動作温度 | -40 °C to +85 °C |
WM8903CLGEFK 40-qfn (5 x 5 mm) ピン配置ガイド
WM8903CLGEFK (40-qfn (5 x 5 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: WM8903CLGEFK.
詳細は データシート をご参照ください。
主な用途
WM8903CLGEFK の用途: 6 件s: Portable Media Player, Smartphone and Tablet Audio, Bluetooth Headset, Portable Gaming Audio, Smart Speaker, Digital Audio Accessory.
Portable Media Player
The WM8903CLGEFK fits portable media players that combine stereo recording and playback in a compact board area. Its 24-bit conversion, 2-ADC/2-DAC topology, and ultra-low-power positioning address both signal resolution and battery-sensitive operation. Place the codec between the analog headphone or line-output stage and the digital audio controller, then use local bypass capacitors and controlled ground return paths. The 40-QFN package measures 5 x 5 mm, allowing it to sit close to the audio connector and reduce sensitive analog trace length. Designers should verify sample-rate limits, clock requirements, supply voltage, and active current against the manufacturer datasheet before fixing the system power budget and audio-clock architecture.
おすすめ
Smartphone and Tablet Audio
The WM8903CLGEFK is suited to compact mobile-device audio subsystems requiring stereo microphone capture and headphone playback. The 24-bit ADC and DAC channels provide a higher-resolution interface than 16-bit audio paths, while the 5 x 5 mm 40-QFN package helps preserve PCB area. It can sit between MEMS microphones or a line input and an application processor supporting the required digital audio interface. Layout priority should be separating microphone signals from display, switching-converter, and high-speed digital returns. Use the manufacturer reference circuit to select bypass capacitance, clocking, and exposed-pad thermal-via arrangements, and confirm that the system can support the codec’s required sample rates and low-power control states.
おすすめ
Bluetooth Headset
A wireless headset can use the WM8903CLGEFK for analog microphone capture and stereo audio playback. Its ultra-low-power design focus is valuable in battery-constrained wearables, while the 2-ADC/2-DAC architecture allows the codec to serve both voice input and music output. Position the codec near the headset connector or microphone array and keep the analog paths short and symmetric. Digital audio data can then pass to a wireless audio SoC through a compatible serial interface, subject to the datasheet-supported formats. Verify clock accuracy, microphone biasing, headphone-output loading, and power-state requirements in the reference design. The exposed pad should follow the manufacturer’s thermal and electrical land-pattern guidance.
おすすめ
Portable Gaming Audio
The WM8903CLGEFK can support portable game consoles and handheld entertainment devices that require simultaneous game-audio playback, voice capture, or line-level accessory input. The stereo 24-bit ADC and DAC channels provide a unified analog interface for the system, and the compact 40-QFN footprint reduces routing congestion around dense display and processing components. Keep analog input and output sections away from switching regulators and fast digital clock lines, and provide local supply bypassing at the codec pins. Firmware should use the supported power-saving modes to reduce consumption when audio is inactive. Before implementation, confirm the maximum supported sample rate, digital bus timing, headphone or line-output limits, and exposed-pad connection directly from the manufacturer documentation.
おすすめ
Smart Speaker
The WM8903CLGEFK is applicable to connected audio products that combine voice capture with stereo music playback. Its 2 ADC channels can serve microphone or line-in duties, while the 2 DAC channels support stereo audio delivery to a downstream amplifier or codec network. The ultra-low-power design can help manage energy use in mains-powered products that also operate in low-power states. Place the codec near the analog input and output circuitry, maintain a quiet ground reference for microphone signals, and isolate digital control traffic from high-impedance analog nodes. A system integrator should verify digital interface format, sample-rate support, clock jitter tolerance, and analog output loading. The 5 x 5 mm QFN package also supports compact multi-function enclosures without requiring a board-edge expansion.
おすすめ
Digital Audio Accessory
The WM8903CLGEFK can serve as the analog conversion element in a USB, network, or wireless digital-audio accessory. The 24-bit ADC and DAC channels provide a consistent interface between external analog connectors and a digital audio controller, making the codec useful in headphone interfaces, speaker adapters, and compact home-audio nodes. Place analog connectors, protection devices, and the codec within the same localized signal section to minimize susceptibility to digital coupling. Use the manufacturer reference schematic to determine bypass capacitance and output-network values, and follow the recommended exposed-pad via arrangement for manufacturability and thermal performance. Firmware and hardware validation should cover supported sample rates, serial-audio timing, mute behavior, and power sequencing before production release.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: WM8903CLGEFK — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | WM8903CLGEFK/R |
|---|---|---|
| Package | 40-QFN (5 x 5 mm) | 40-QFN (5 x 5 mm) |
| Brand | Cirrus Logic | Cirrus Logic |
| Product Type | Stereo audio interface | Stereo audio interface |
| ADC Channels | 2 channels | 2 channels |
| DAC Channels | 2 channels | 2 channels |
| Conversion Resolution | 24 bit | 24 bit |
| Power Class | Ultra-low-power | Ultra-low-power |
| Operating Temperature | -40 °C to +85 °C | -40 °C to +85 °C |
| Total Pins | 40 pins | 40 pins |
| Order-Code Suffix | FK | /R |
主な差別化要因
- Matched stereo conversion architecture (vs WM8903CLGEFK/R)
- Identical confirmed package format (vs WM8903CLGEFK/R)
- Portable-audio power positioning (vs WM8903CLGEFK/R)
設計ノート
Place the WM8903CLGEFK near the external audio connectors, microphone network, and analog output components so sensitive signals do not cross digital clock, data, or switching-supply routes. Keep microphone and line-input paths short and symmetrical, provide local bypass capacitance at the supply pins, and use a continuous quiet ground reference around the analog section. Apply the manufacturer’s exposed-pad land pattern and via arrangement during footprint creation.
Separate analog and digital return paths carefully because digital audio clocks and control signals can couple into high-impedance microphone inputs. Route clock and serial-data lines away from the codec’s analog pins, avoid sharing wide return segments between analog and digital circuits where possible, and validate the final board with an oscilloscope during audio activity. Confirm the supported digital audio format, sample rates, and clock requirements from the manufacturer datasheet before PCB release.
Do not assume that every 40-QFN stereo audio codec is pin-compatible with the WM8903CLGEFK. Before substituting another codec, compare all 40 pin positions, exposed-pad treatment, supply rails, ground pins, clock inputs, digital audio signals, control pins, and analog input topology. A package match alone does not establish drop-in compatibility, particularly for proprietary register maps or different digital interfaces.
Use the exposed pad as both a thermal and electrical connection according to the manufacturer layout instructions. Recommended thermal-via geometry should be implemented while observing manufacturing restrictions around via-in-pad processes and solder wicking. Thermal performance depends on the exposed-pad copper area, via count, board construction, ambient temperature, and codec dissipation, so validate the assembled design under worst-case audio-load and ambient conditions.
コンプライアンス情報
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for WM8903CLGEFK. The operating-temperature range of -40 °C to +85 °C is associated with the listed WM8903CLGEFK/R ordering code.